OWB 10g Release 2 for HP Tru64 Unix

Where I can get the OWB 10g Release 2 for HP Tru64 Unix ? On OTN download page I found only OWB Release 1 for HP Tru64 Unix.

next year it is next week actually ;-)
metalink -> certify -> by platform -> HPUX Itanium -> DB Server -> EE -> 10gR2 -> Additional Info
Planned for January

Similar Messages

Owb 10g release 1 HP Unix Version

Dear All,
Can i know the suitable version for owb 10g release 1 for HP UX Itanium matched for owb 10.1.0.4 windows client version?sh
regards
raje

Hi,
Firstly you need to Uncompress the downloaded files
gunzip xyz.cpio.gz
It will create file called xyz.cpio
Now you need to Unpack the downloaded files
cpio -idmv <xyz.cpio
Thanks,
Sutirtha

When can we download the Oracle 10g for HP Tru64 Unix?

Hi,
Could you tell me the time to release the HP Tru64 Unix version?
Thanks

Check this: http://otn.oracle.com/software/products/database/oracle10g/index.html
Joel Pérez

Experts VS Process Flows on OWB 10g Release 2 (Paris)

I was looking at the the new features list for OWB 10g Release 2 (Paris), and I notices the new feature called Experts. Does anyone have any insight into when an Expert would be used instead of a Process Flow? It doesn't look like Process Flows are going away, so I was trying to get a grasp of the use for Experts.
From Here:
http://www.oracle.com/technology/products/warehouse/htdocs/owb10gr2%20new%20features.htm
Experts. Experts are solutions that enable advanced users to design solutions that simplify routine or complex tasks that end users perform in Warehouse Builder. You can design these solutions in the Expert Editor which resembles the Process Flow Editor and shares many of the same commands and navigational tools.

Hi,
Just to start with the Experts capabilities, they can be used for designing schema objects.......I tried with an expert for sampling the source files, creating External Tables on top of it....validating and deploying..........itz very interesting to work with.........I am unable to see the practical use of this for end users.....
where as we all know, the PF can only be for executing the deployed objects.....
Mahesh

When will the new OWB 10g release 2 be available?

HI...
I would like to know if there is a timetable to
download in the OTN site about the new version of OWB 10g release 2..
I saw the the new version of this tool last year in the Oracle Open World and I am very curious to do some test and implement in our production environment.
We are using OWB 10.1.0.2..
Thanks
Flavia Soares Silveira
Scania Latin America ltda

Good morning Tracy,
According to Oracle OWB is going to be part of Oracle Business Intelligence... at some stage in the future.
Right now BI10g consists of the following (check link at http://www.oracle.com/technology/software/index.html):
Oracle Business Intelligence
... Oracle Business Intelligence Discoverer
... Oracle HTTP Server
... Oracle Application Server Containers for J2EE (OC4J)
... Oracle Enterprise Manager 10g Application Server Control
... Oracle Application Server Web Cache
No OWB10gR2 as you can see.
Metalink rang me earlier this week for some TAR, and they were hoping to see OWB10gR2 released this year... this implies that we have to count ourselves lucky if that means december. At the moment they're working hard to get a stable product out, guess there are more serious bugs to solve than they had anticipated on previously.
Cheers, Patrick

OWB 10g Release 2 from 32 bit to 64 bit on Linux

Hi guys,
I have a client who is planning to migrate their Linux server from 32 bit to 64 bit and migrate their Oracle database from 10.2.0.3 from 32 bit server to 10.2.0.3 from 64 bit server.
We have OWB 10g Release 2 (10.2.0.3) installed in the 32 bit server.
Our DBA is planning to move the entire database to the new server including the OWB repositories.
My question is,
Will the following work?
1. Install the OWB 10g Release 2 (10.2.0.3 or 10.2.0.4) 64 bit in the new 64 bit Linux 64 bit server
2. Remove all the OWB repository user schemas & roles from the database where OWB is installed
3. Install the OWB repository in the new 64 bit server
4. Import the .mdl backup of the project from existing OWB 32 bit to the new OWB 64 bit server
5. Configure the project with the new server
OR
Since our DBA is planning to move the entire database to the new server including the OWB repositories
1. Install the OWB 10g Release 2 (10.2.0.3) 64 bit in the new 64 bit Linux 64 bit server
Will I be able to access my repository that is migrated from the 32 bit server (avoiding the installation of OWB repository and importing the project and configuring the whole project in the new server) ?
Please someone shed some light on this. Your help is appreciated
Thanks in advance....
Edited by: user528846 on Feb 11, 2010 11:59 AM
Edited by: user528846 on Feb 11, 2010 11:59 AM

Does this mean, ... we have to install the OWB 64 bit and install a new repository in the 64 bit server?In my opinion you don't need to create new repository.
After migrating database to 64bit perform steps from Metalink note 434272.1 "How To Update Warehouse Builder 10.2 After A Database Cloning".
It is better to save the same path for new OWB 64bit software. If you install OWB into different path you need to update OWBRTPS table with new path to OWB software (look at metalink note 550271.1).
Regards,
Oleg

Support for Compaq tru64 unix ver. 5.x

I would like to know when the Oracle 9i AS
Portal product is ready for Compaq Tru64
unix ver. 5.x?
And can I use the Oracle 9i AS Portal alone
with Oracle 8i db also running Compaq Tru64
unix ver. 5.x?
Thanks in advance

Hej Michael
Do You know when Oracle 9iAS Portal will be certified to Compaq Tru64 Unix ver. 5.x?
Best regards
Anders Trier Rasmussen
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Michael Stephenson ([email protected]):
Oracle 9iAS Portal (3.0.6.6.5) is currently certified against Compaq Tru64 Unix 4.0d-g with the following patch kits for the OS: if you have 4.0d you need patchkit3, if you have 4.0f you need patchkit1. You will also need JavaSoft JDK 1.2.2_05A.
You can run both the Portal and the database on the same Tru64 system, just be sure to put them in separate ORACLE_HOMEs. The database releases that has been certified with the Portal on Tru64 are 8.1.6 and 8.1.7.<HR></BLOCKQUOTE>
null

Download for Compaq Tru64 unix

Hello,
I am trying to install WLS6.1 on Compaq Tru64 unix. I have downloaded the
installable from the BEA website. The downloaded file is
"weblogic610sp3_generic.zip" and the site mentions that this is WLS 6.1
download with SP3. But it seems like this file contains only the SP3 files.
Where can I get the download for WLS6.1 for Compaq Tru64 unix?
Regards,
Madhavi

Thanks. I got this impression because usually the SP releases come as zip
files while the WLS installables for unix systems come as bin files. I could
install using the zip file successfully.
Madhavi
"Wayne W. Scott" <[email protected]> wrote in message
news:[email protected]..
>
>
>
What gives you the impression that it is just the SP3 files in there?
The SP3 file has a different name. For example, on Windows it is
wls61sp3_upgrade_win.exe. I hope you are not unzipping it.
Just try to install it. If you're stuck, open a case and I'll look forit!
>
>
Wayne Scott
Madhavi wrote:
Hello,
I am trying to install WLS6.1 on Compaq Tru64 unix. I have downloaded the
installable from the BEA website. The downloaded file is
"weblogic610sp3_generic.zip" and the site mentions that this is WLS 6.1
download with SP3. But it seems like this file contains only the SP3files.
Where can I get the download for WLS6.1 for Compaq Tru64 unix?
Regards,
Madhavi

Any news on OWB 10g Release 2

Nov has come. Does any one has any news on OWB 10g Release 2 availability?

Hi,
Just to start with the Experts capabilities, they can be used for designing schema objects.......I tried with an expert for sampling the source files, creating External Tables on top of it....validating and deploying..........itz very interesting to work with.........I am unable to see the practical use of this for end users.....
where as we all know, the PF can only be for executing the deployed objects.....
Mahesh

Is there Tux 7.1 for Compaq Tru64 Unix 5.1 version

Help!
please tell me if there is Tux 7.1 for Compaq Tru64 Unix 5.1 version.
send it to my email: mailto:[email protected]
Thanks.

I encountered matching problem while trying to use Tuxedo 6.5 from the
original installation package. The best match for Compaq Tru64 UNIX 5.1
from the available platforms on the cd was "Digital Unix 4.0d on DEC
Alpha".
However the simpapp failed to shut down, just like Yshyang has written
below. After contacting BEA support, the support personnel asked if a
patch has been applied (check if a $TUXDIR/udataobj/patchlev file
exists). It didn't.
The Tuxedo 6.x platform data sheet at
http://www.bea.com/products/tuxedo/platforms_6.shtml
shows that Tru64 UNIX 5.1 is supported, if Tru64 UNIX 4.0b binaries with
patch level 160+ are used.
We got a separate patch for the 4.0b binaries, but working Tuxedo 6.5
installation binaries for Tru64 UNIX 5.0 are available for download at
BEA web site.
Juha Laitinen
Yshyang wrote:
I install Tux 7.1 in Tru65 Unix 5.1 and TruCluster Server 5.1
when i configure simpapp.
tmboot is ok,but tmshutdown can't work,the error is :
CMDTUX_CAT:766:ERROR:must run on master node
(In act I run in master node really,I have checked by uname -n).
the other bizarrerie:
tmadmin
display :
TMADMIN_CAT 202:ERROR:Can't find DBBL in master node or backup node.
(In act my simpapp ubbconfig is:MODEL=SHM)
maybe there is bug I guest.
If it need some patch in the env.
"Marcin Kasperski" <[email protected]> wrote in message
news:[email protected]..
yshyang wrote:
Help!
please tell me if there is Tux 7.1 for Compaq Tru64 Unix 5.1 version.
The version for 'Digital Unix 4.0 sth' seems to be working on 5.1.

Owb 10g Release 2

Hi,
when will the 10gR2 Warehouse Builder be released? Is there any document of the owb10gR2's functionalities available?
Thanks!
Juha

Look here:
When will the new OWB 10g release 2 be available?
Production: December 2005
Developer Release: Oracle OpenWorld 2005
Do yave you an email adress to send a link to the documentation?
Bye
Detlef

Will OWB 10g Release 2 (10.2.0.3) for Vista 32bit work 100% on XP Pro

All,
I have a problem with installing Oracle Warehouse Builder 10g Release 2 (10.2.0.1), after the install i cannot run the design center. So I removed this software and installed the newest version (see title). But there is "Vista 32bit" in the download title. Now I installed this and it seems to be working but I don't want to see my future work become invalid after a while. I can't find in the documentation anything about this new version working on XP.
Anyone who can help me out pls.

Tash wrote:
It is not that I wnat Vista version but I couldn't get 10..2.0.3 XP version. If there is this version available for XP, I don't want vista but if it;s not available I am wondering if vista version works on XP like other softwares which latest alys works on previous version OS.Not in oracle. For oracle, you should use the correct version for the right o/s only.
Thank you for info. Can I get a XP version of 10.2.0.3 without having to patch from previous version?AFAIK, I don't think its possible. You have to install 10201 and than apply the patch to it to make it 10203.
HTH
Aman....

Post-upgrade tasks for OWB 10g Release 2

Hi,
we're planning to upgrade from OWB 10.1.0.2 to 10.2.x.
Now, I'm trying to get a clear view on what will be the "post-upgrade" tasks, in terms of manual adaptations, corrections, etc. to get everything back up and running after the upgrade ...
E.g. : by means of test al already exported a dimension, and imported it in the 10.2 repository ... Turned out that in the pre-10.2 version, there were no validation problems, but as from 10.2 (although the upgrade and import were successful), I got 19 warnings and 2 errors ... because each level needs to have a business or surrogate key ...
It' s things like that I'm especially interested in, in order to determine the workload after the upgrade ...
So, feel free to share your experiences ; I'm looking forward to read them!
Thanks!
Grtz.

Here are some from my list. I stopped maintaining it a while ago, we have lots more where this came from. Some of it also apply to older versions of OWB.
Key lookup     You are to choose input and output attributes BEFORE being able to choose loookup table, all in a time consuming wizard
Expressions     Copy and paste into expression editor, validation fails for expressions using lowercase (such as "upper" or "substr")
Renaming attributes     Not possible anymore, you need to open details
Adding a table component     You must browse in a tree structure (time consuming), not search functionality anymore
Import     Import converting from 9.2 hangs after 15% in about 10% of all imports
Import     Some mappings are not possible to import, a total rewrite is necessary
Deployment     You can only deploy about 5-10 times before you need to restart OWB
Memory leak     If something goes wrong in OWB, memory is never cleared - JAWAW.exe needs to be removed manually from memory
Import     Importing mappings one by one (as this is sometimes needed due to OWB), the last directory used is OF COURSE not default when importing the next time
OWB GUI / mapping editor     When working with components in the mapping editor, an object hidden behind the object you are actually working with is selected prior to the object in visual focus to the user
BUG!     Urgent: CASE - wrong generated Code
ANSI JOINS     Remove ANSI-SQL from mapping configuration, otherwise (+) outer joins will not work
Transformations     Not possible to enter a transformation such as "sysdate", you must find it in a huge tree structure list (no search available)

OWB 10g Release 1, version 10.1.0.3, windows client download

Hi,
I am looking for the windows client for the OWB version 10.1.0.3. I am not able to locate the software download anywhere in the Oracle website, could not locate the archive location from where I could download older versions if any.
Any help locating the download in oracle site or in any other means is appreciated.
Thanks in advance,

Thanks for your response...
Yeah, I have a client running 10g R1 version 10.1.0.3 server and the only client installed windows machine crashed and they are using the client on the server. It would be very useful if they could have the windows client for that specific version.
We are also doing a fresh install of OWB 10.2.0.5 on a new server and trying to create the repository and import the .mdl project backup from the prod server (OWB 10.1.0.3).

Error in installing a new Repository in OWB 10g Release 2

Hi,
I am facing a consistent problem in creating a new repository, even after uninstalling and re-installing the OWB client many times. While creating a repository, I get the following three errors, after which the Repository Assistant automaticlly shuts down:
1. The wizard noticed that the installation parameter 'enqueue_resources' of the database GRUSIT is set to 968. The recommended value for Warehouse Builder is 3000.
2.The Warehouse Builder repository owner installation failed on user REPOWNER.
java.sql.SQLException: ORA-04031: unable to allocate 4080 bytes of shared memory ("shared pool", "BEGIN
DECLARE
PROCEDURE brow...", "PL/SQL MPCODE", "pl/sql DS pg")
3.INS0029: Error occured during installation. Check the log file
F:\OraHome_1\owb\UnifiedRepos\log_070504_115828.000.log
for details.
Could you pls help me in resolving this issue?
Thanks in advance,
Tanvi

Does this mean, ... we have to install the OWB 64 bit and install a new repository in the 64 bit server?In my opinion you don't need to create new repository.
After migrating database to 64bit perform steps from Metalink note 434272.1 "How To Update Warehouse Builder 10.2 After A Database Cloning".
It is better to save the same path for new OWB 64bit software. If you install OWB into different path you need to update OWBRTPS table with new path to OWB software (look at metalink note 550271.1).
Regards,
Oleg

OWB 10g Release 2 for HP Tru64 Unix

Similar Messages

Maybe you are looking for