OWB 11.2.0.1 SAP LOCATION: Problem with separate FTP Server connection

Hello,
hope somebody can help me. We are working on a BI Project by our Customer with a Exadata Machine.
The Goal of this project is to have the DWH on the Oracle Exadata machine.
At the Moment we have the Development System on a separate Server with OWB 11.1. and are to get stuck because we can't work with OWB 11.2 with the problem we have.
Separate for the coming Migration we set up for testing a machine with OWB 11.2.0.1 (Exadata is productiv system, so not available for testing)
The SAP System of the customer is on a separate physical Machine as the FTP Server.
The new possibility from the OWB 11.2 SAP Location allowed choose between different transport type, also for a separate FTP Server.
We took FTP as Transport Type and we input the FTP IP Adress, User etc.
The Inputs are all correct, we have also check if its possible to connect the FTP server via fillezilla, via cmd -- all works fine
But OWB 11.2 show us by test the connection this Error:
ENV0032: Location SAP_TEST is invalid. Check that you provided the PASSWORD or+
valid values for at least one of the set of mandatory parameters+
HOST_LOGIN_HOST+
I know that seems as if some is not ok with the password or the other parameters.
But all inputs are correct and the password doesn't contains any special character.
Also the connection to the SAP system works fine with OWB 11.2 but not with the FTP System.
Have somebody experience with this error or on a project by customer with separate SAP and FTP System?
Thanking you in anticipation

Similar Messages

Problems with AOL IMAP server connection on my BlackBerry Z10 STL100-3, and BB PlayBook 64GB WiFi

Problems with AOL IMAP server connection on my BlackBerry Z10 STL100-3, and BB PlayBook 64GB WiFi
Thursday 4:20am EST, 02-19-2015
Hi, My connection to the AOL IMAP server has suddenly failed - Says "Not Connected" on Accounts page
I haven't changed anything and this just started failing this morning.
I've saw same issue on my Blackberry PlayBook 64GB.
Is anyone else recently experiencing AOL IMAP Errors?
Solved!
Go to Solution.

Yes! Same thing happened suddenly to my Z10 this morning. No AOL.

Backup Problem with only Production Server

Hi all
Here i have backup problem in only production server. In my tape drive device all schedule backup of Development server and Quality Server and Production server . In this i get all backup in Development and Quality server, But in Production server backup was fail and not only one all backup is fail from last 2 days . So can u tell me what is the problem with my production server and how can i find it in production.
And any hardware issue or OS issue is responsible for this.
Please help me out.
Thanks
Keyur

Hi,
Can u pls post us the backup log? Also let us know ur product details like OS, SAP, DB version and also the backup tool(if any).
Regards,
Varadharajan M

Problem with sun app server startup

hi,
i am getting problem with sun app server default start.the error is::
[#|2006-03-01T13:54:35.121+0530|WARNING|sun-appserver-pe8.2|javax.enterprise.tools.launcher|_ThreadID=10;|LAUNCHER005:Spaces in your PATH have been detected. The PATH must be consistently formated (e.g. C:\Program Files\Java\jdk1.5.0\bin; ) or the Appserver may not be able to start and/or stop. Mixed quoted spaces in your PATH can cause problems, so the launcher will remove all double quotes before invoking the process. The most reliable solution would be to remove all spaces from your path before starting the Appservers components. |#]
now i am useing Win Xp operating system,
show me a solution.
Regs..
Narasimha

You haven;t specified the exceptions you r getting ........while starting your default server.
if u r getting exception about InetClass then connect your system with LAN/Internet then your problem will be solved becoz i m using same location address as you specified, space doesn't matter at all - i think so, it is running fine........

HT4864 I am getting a triangle with an exclamation point next to my inbox...it says: There may be a problem with the mail server or network. Verify the settings for account "MobileMe" or try again. The server returned the error: Mail was unable to log in

I can send but cannot recieve email
This is the messege I am gewtting:
There may be a problem with the mail server or network. Verify the settings for account “MobileMe” or try again.
The server returned the error: Mail was unable to log in to the IMAP server “p02-imap.mail.me.com” using “Password” authentication. Verify that your account settings are correct.
The server returned the error: Service temporarily unavailable

Also if I go to system preferences accounts and re-enter the password it fixes the glitch sometimes.

Problem with the new server UCS C220 for set IP to CIMC

Hi
We’ve a problem with the new server UCS C220.
We bought two servers UCS C220 M3 for CallManager 8.6 with High Availability.
When we turn on the server during the boot and when it tells us, oppress F8 to enter at the CIMC and set the IP. But it never enters at the CIMC.
Then, we configure our DHCP server and our switch, we connect the three gigabyte ports to our switch to give him an IP to the CIMC, so and then can enter via browser, but neither works.
Note. The dedicated management NIC does not link, the other two ports do make link.
What do you suggest to put an IP to CIMC and start installing our applications?
regards

You may have noticed that there is no DVD rom on the c220. What you need to do is:
Login into the CIMC from your browser
Luanch the KVM
Insert the VMware DVD in your machines drive
On the KVM pop up there should be a tab to mount the drive, after mounting it click on Macros and choose ctrl_alt+delete to restart.
After the VMware OS installs press F2 to enter IP.
Browse to the VMware ip to download the Vsphere client
Open the Vsphere client, enter the ip of the vmware and the username will be root and no password if you did not set one.
You can now upload OVA templates or manually create virtua machine from this enviroment.
Hope this help

Why do I get an "unable to connect - There may be a problem with the mail server or network." message from iCloud. I have verified the settings. I can access my iCloud account online but can't send or receive e-mail via the mail account.

Text limits to the "Question" link prevents a full explanation:
This is a long-time problem. I have tried to resolve it with Apple but their "Customer Support" is merely a name.
I can go online and access my e-mail but when I try to send or receive e-mail via iCloud through my internet server (Google fiber now but the same situation existed with my prior service), I receive "There may be a problem with the mail server or network. Verify the settings for 'Apple Email' and try again.
"The server returned the error: The server 'p0-imap.mail.me.com' refused to allow a connection on port 143."
Well, I have verified the setting and tried again and again and …
Well, you get the idea …

JungleTaxi Cabbie wrote:
Csound1: iCloud: Configuring Mail with Mac OS X v10.6 or iOS 4
Enter your Incoming Mail Server, User Name, and Password using the following settings:
Incoming Mail Server: mail.me.com
User Name: Your iCloud email address (excluding @me.com)
Password: Your password
Last Modified: Jun 27, 2013
Maybe you should test these things before calling people out, because these settings do function perfectly well.
iCloud is not supported on Snow Leopard or lower, why bother to mention it?
The OP has an iCloud account, and that can not be opened without Lion or Mountain Lion (on a Mac), IOS5 or 6 (on an iPhone/iPad)
The document I linked to is Apples documentation for iCloud on current devices,I don't care whether you believe that you know better than they do, but it will affect the people who follow your advice as it won't work
JungleTaxi Cabbie wrote:
Also, if you're not running Lion or Mountain Lion, there is no "Mail, Contacts & Calendars" prefpane.
I never said that there was, perhaps you imagined it.

How can I debug a problem with the 3g data connection on my iPhone 4s?

This question didn't get any answers in the "Using iPhone" forum. Thought I would re-ask here. Note, I had to reset the network again today 2 days after the last reset:
I've been having intermittent problems with my 3g data connection on my iPhone 4s on ATT. Whenever this happens I see full bars etc, but can't browse from safari or get any data in other apps. My wife's iPhone 4 right next to me has no issues at all. Switching on/off airplane mode and turning off/on Cellular Data does not help. The only thing that helps is resetting the Network Settings or hard restarting the phone.
I figured my problems were hardware related so I took my phone in for a replacement the other day. Things started out fine but after I upgraded it to 5.01 and restored my backup and now I am back to having the same issue today. I assume the issue is with something coming from my backup / restore but is there any way for me to pinpoint what could be causing the issue. I have a lot of apps, I'd rather not have to reinstall and set them all backup manually, but I would if I knew that would fix the problem... but for all I know one of the apps could be causing it.
Anyone have any logs I can check or testing I can do on my end?
Thanks!

Unfortunately, Apple does not make any logs available to the average schmoe (like us) for networking, kernel dumps, or anything else (assuming, of course, it is not jailbroken).
Your best bet is to take it back into the store. Ask them to look at the notes in GCRM regarding the last time this occured, then explain after upgrading to 5.01 it is occuring again. Then ask them for a phone swap since it is a reoccuring issue and doesn't sound like an OS/SW issue. Good luck!

Intermittent proxy error "There is a problem with the proxy server's security certificate. Outlook is unable to connect to the proxy server "

Hi all,
From time to time (at least once a day), the following message pops up on the user's screen:
"There is a problem with the proxy server's security certificate. Outlook is unable to connect to the proxy server . Error Code 80000000)."
If we click "OK" it goes away and everything continues to work although sometimes Outlook disconnects. It is quite annoying...
Any ideas?
Thank you in advance

Hi,
For the security alert issue, I'd like to recommend you check the name in the alert windows, and confirm if the name is in your certificate.
Additionally, to narrow down the cause, when the Outlook client cannot connect again, I recommand you firstly check the connectivity by using Test E-mail AutoConfiguration. For more information, you can refe to the following article:
http://social.technet.microsoft.com/Forums/en-US/54bc6b17-9b60-46a4-9dad-584836d15a02/troubleshooting-and-introduction-for-exchange-20072010-autodiscover-details-about-test-email?forum=exchangesvrgeneral
Thanks,
Angela Shi
TechNet Community Support

There is a problem with the proxy server's security certificate. The name on the security certificate is invalid or does not match the name of the target site "Mailserver"

Good day Guys
First of all I am not an Exchange Expert, and I might be asking a very stupid question, but please bare with me. :)
While I was on leave our Mail server fell over and The company got a Specialist to help out for the time being.
We where\are on Microsoft Exchange 2007 , which Fell over, and the specialist was able to recover as much data as he could.
They then installed Exchange 2013 and tried to migrate everything from 2007 to 2013 and not everything migrated over.
But the problem is, Outlook Anywhere was enable on 2007 and worked a 100% (before the disaster)
With Exchange 2013 I get the following error message when trying to connect With Outlook 2013, using an external connection:
"There is a problem with the proxy server's security certificate. The name on the security certificate is invalid or does not match the name of the target site "Mailserver"
Outlook is unable to connect to the Proxy server. (Error Code 0)"
Has anyone had the Similar when migrating over from 2007 to 2013 or is this an Issue on IIS and nothing to do with Exchange migration?
Your assistance will be greatly appreciated.

Hi,
Firstly, I would suggest we use Exchange 2013 FE as the Outlook Anywhere proxy server.
For the certificate issue, it mostly occurs because the host name that Outlook are trying to access does not match the certificate SAN. Please check with this point. If they do not match, you
can change the host name by referring to the following article:
https://support.microsoft.com/kb/940726/en-us?wa=wsignin1.0
Thanks,
Simon Wu
TechNet Community Support

Logon problem with oracle management server

I have problem with Oracle Management Server when I connect to the OMS message comes
The exception (java.lang.NullPointerException) occurred.
if any body have any idea pls tell us

Hi,
Oracle has changed the Enterprise Manager from version 1.5 to 2.0 .
With the new Oracle8i dataase server another service has been added.
If you want to user the OEM you have to install The Managment Server.
The Managment server has its own user and privileges and is recommended when using OEM.

Update to Muse CC 2014.3 still have problem upload to FTP: Server not responding in time, FTP may not be supported on this server [Connection timed out after 15001 millseconds.] I have no problem with CC 2014. Can you suggest what do I have to do?

Update to Muse CC 2014.3 still have problem upload to FTP: Server not responding in time, FTP may not be supported on this server [Connection timed out after 15001 millseconds.] I have no problem with CC 2014. Can you suggest what do I have to do?

Hello.
Today I got the opportunity to work with a Muse user with the same issue after performing the troubleshooting steps in the post above we decided to contact the host.
Later i came to know that host took Muse user's IP and they were able to unblock it and muse started connecting to FTP host.
I another scenario Host suggested Muse user to add :21 to the FTP address and then Muse was able to connect.
Eg ftp.domain.com:21
Please try the 2 suggestion above and let me know if it works.
Regards
Vivek

I'm having problems with my mobile internet connection

I'm having problems with my mobile internet connection. Wifi works fine. It seems like my connection get lost every tuesday and friday between 11 and 12 am local time (guess it would be between 2 and 3 am Los angeles time for example). The connection won't comeback by itself. I have to turn the phone, iPhone 4s iOS 5.0.1, off and back on again. The connection immediatly works fine after the restart and stays fine for days. I really don't know what to do. My provider doesn't seem to know either. Tried a lot of things, new settings, resets, I even got a new iPhone. Still the same problem however. Richt now I changes the time setting to see it the problem occurs at another time. Btw: the phone doesn't say "no service" and I can send sms messages and make phonecalls. The 3G symbol or the circular symbol is shown next to the name of the provider.
Does somebody has an idea what this might be? Thanks a lot.

Update. My carrier says the antenna of my iPhone 4s is not so good as the one in the iPhone 3G. They can't solve the problem. Their signal is too weak for the 4s at places I spend most of my time. Not the answer I expected, but I'm free to choose an other carrier. Hope this will help.
This was not the correct answer, I accidentially clicked the button..
Message was edited by: vasch

I have problem with Adobe ColdFusion Server Manager.

I have a problem with Adobe ColdFusion Server Manager when you log on and connect to the server. An advantage of the settings do not load.

When I see others screen cuts of CF Server Manager here:
http://www.coldfusionjedi.com/index.cfm/2009/10/21/Quick-example-of-Diff-within-the-ColdFu sion-Server-Manager
http://forta.com/blog/index.cfm/2009/7/6/Simplified-ColdFusion-Server-Management
the Errors View button display’s the yellow ! sign. Without a better guide I just thought that is a normal button icon until I noticed Charlie comment earlier in the thread and I thought hold up that is not normal.
As it is when I press Errors View I get “no error” which might be because there is none or just simply not giving meaningful details as per some other CF Server Manager limitations previously noticed in other threads on forum here.
I just hope some of that helps the original post to do with the display of the settings on left side. Maybe a better look at the error might help? Does anything get logged in CFadmin UI > Debugging & Logging > Log Files that relates to issue?
Regards, Carl.

Can the problems with the Cirrus server cause this

Hello,
We are have been developing an application using the Cirrus server for two months now and today we are having difficulties with the Netconnection.call method which we use to call the OnRelay method on the other peer. When a peer invokes the call method on his netconnection the OnRelay on the peer is called some of the time (so it is really unreliable).
We are curious whether this could be related to the recent problems with the Cirrus server? If not, what could be a reason the calls are working only some of the time?
regards,
Kevin

while the problems with our hosting provider are not yet resolved, the cluster should be operating nominally. that should include the proper and relatively reliable functioning of the relay/onRelay function.
note that relay/onRelay is rate limited to about 1 relay every 2 seconds (approximated with a sliding window and about 10 relays every 20 seconds). this rate limit is in place because the relay/onRelay function is expensive to provide and a developer was abusing it. the limit is implemented by dropping relay requests for a time if the rate exceeds the limit point. the limit is per sender NetConnection.

OWB 11.2.0.1 SAP LOCATION: Problem with separate FTP Server connection

Similar Messages

Maybe you are looking for