Owb 11.2.0.3 changing the name of a mapping is not reflected in the process

We're just in the phase of migrating from OWB 10.1 to 11.2.0.3.
So far so good but of course there are some bugs in the latest version.
One of the more annoying problems is the following.
We could see a process flow with several mappings after the migration but the mapping names shown (business and physical) in the process flow could not be found in the list of mappings .
To be sure this is an error (bug)
- I created a flow from scratch with one mapping,
- saved the flow and
- went to the mappings and
- there I changed the name of the mapping used in the flow.
- I opened the flow again and there was still the old name, so it is very easy to forget/delete the link between real mapping names and the names used in the flow.
Is this a known problem and if yes is there already a patch or do we have to wait for 11.2.0.4?

Yes OWB 11gR2 is certified on database 10gR2.
The OWB standalone client can be found here;
http://blogs.oracle.com/warehousebuilder/entry/owb_11gr2_windows_64_bit
or on OTN here;
http://blogs.oracle.com/warehousebuilder/entry/owb_11gr2_windows_and_linux
Cheers
David

Similar Messages

The logo for the application has been changed in Azure portal, but it's not reflected during the login

Hi Azure support,
my name is Linda, Office365 technical support. I want to ask one Azure question on behalf on my customer. she has AAD_basic subscription.
she tried to change logo of one application, but failed. she followed the steps as below:
1. add the "Logo" in the application;
2. logo not reflect in the login page.
I cannot attach the screenshot, if you want, you could email me v-linsha
hope you could give some suggestion and resolution. thank you.

Sometimes I know I haven't changed anything in the external file. In this case, the supposed conflict seems to be a bug and I overwrite with Lightroom metadata without exception (but with fingers crossed) - that bug has been reported.
Other times however, I have edited the file in an external editor, and its possible that the external editor wants to add some information that may be worth having, or it may be that its lost the original information - this is when its a dilemma:
If I overwrite disk file with Lightroom metadata, I may be losing what the external editor added.
If I overwrite Lightroom metadata with disk data, I may be losing what Lightroom had and the external editor dropped.
This scenario has not been reported as a bug, since I don't know if it is one. If I could see the difference between the two, then I'd know.
Rob

Wage type is not reflected in the infotype

Hi experts,
I have created 3 wage types i.e Basic pay, HRA, and TA and i configured in 'Base Wage Type Valuation'
transaction too. But while creating the infotype 'basic pay', HRA is not reflected in the Amount field.
I have given 50% of Basic pay in the hra field as shown below in the transaction 'Base Wage Type Valuation'.
TARIF 0001 Basic Pay - BHEL 1 2009/01/01 9999/12/31 100.00
PRZNT 0002 HRA - BHEL 2 2009/01/01 9999/12/31 0001 Basic Pay - BHEL 50.00
I request all to guide to solve this issue.
Regards,
Praveen Amirthan.

Hi,
What is maintained in the Indirect Eval. Module and Module Variant for HRA WT in its characteristic.
Change it to INVAL B for the calculation to happen based on percentage of Basic pay as defined by you.
VK

HT2513 How do you change the name of a reminder in the reminder list. I right click and then choose "get information" I can change the colour of the reminder but when I type in the name that I want and then press enter the name stays as "untitled".

How do you change the name of a reminder in the reminder list. I right click and then choose "get information" I can change the colour of the reminder but when I type in the name that I want and then press enter the name stays as "untitled"

Jerry,
Thanks for replying again. I've got a little bit further thanks to you. I tried the US keyboard layout as you seemed pretty definte that it should work. This time I applied the setting and also started the language toolbar and selected it from there.
Hey presto, I've got the @ where it should be. Excellent.
However the single quote ' works in a weird way. When I press it, it doesn't show up on the screen. But when I press another key, I get the single quote plus the next key I press. When I press the single quote twice, I get 2 of them. This is also the same with the SHIFT ' key. i.e. for the double quotes.
Very strange. I'll look at other keyboards and see where that gets me.
Thanks, Maz

HT204074 Our new iphone5 id name is the same as an existing still in use iphone4 in the family; if I remove the devise; change its name can I then immediately associate it with the correct name.

I have read the HT4627 but I think my original question is more specific Our new iphone5 id name is the same as an existing still in use iphone4 in the family; if I remove the devise; change its name can I then immediately associate it with the correct name.

You can change the name of a device on it via Settings > General > About > Name - you shouldn't need to remove the association and then reassociate it.

PO changes not reflecting in the SAP R/3 system in Extended classsic

Hi Guys,
I have a querry regards to deletion of a PO line item in Extended classic scenario Version 5.0. User has deleted the line item in the shopping cart and now the status of the shopping cart is with Zero value and line item deleted, but in the PO there is a line item with some Value and we are trying to delete it and save it, it gets deleted and PO status it shows as awaiting approval. but at the Item level of the PO the check box of Item deletion is updated. which means PO line item is deleted.
Now my querry is the status of the PO in the SRM shows a awaiting approval and this is not in approval tab but at the header level when I try to search the PO with PO display/change option. Also its not reflecting with the deleted item in R/3 system.
Please help me.
Regards
Srujank

Hi
Check configuration of your Message server. check if your message server is configured properly. Just go to your SAP logon. Select the system say "DEV" and click on groups.Then Click on System id and enter the id as "ID1" in your case.
and then enter the machine name in the message server box and then click on generate list. If your message server is configured correctly you would get some groups in the list below. only if that comes then go to SLD and check in the ABap technical system if you have configured technical system using the proper logon groups.
Then you should not face this problem. Let me know if you require more information.
regards
ravi

SQL Server Service is not reflecting to the new name.

Hi,
I just rename the computer and use the command below to rename the SQL Server but the SQL Server Service is not reflecting to the new name.
Is there a way to change the SQL Server Service and agent to reflect the new name or do I have to re-install sql server.
I am using SQL 2008 R2.
Thank you in advance.

If running "SELECT
@@servername" yields the old server name, it means the instance has not been renamed.
you must run statement to drop the old name of the instance and recreate it with the new name as the default (local) one..
EXEC master.dbo.sp_dropserver 'MACHINENAME\OLDINSTANCENAME'
go
EXEC master.dbo.sp_addserver 'MACHINENAME\newINSTANCENAME', 'local'
go
I took the code here:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/c07ab906-dabf-4303-9737-d430d82c4f42/how-to-rename-instance-of-sql-server-2008-r2?forum=sqltools
Once you did this, look at your maintenance plans. I sometime end up having one or two still following the old name. Especially if you create this new server from a copy of another virtualized one.

IAM-3056160:Modify User Profile request cannot set or change attribute Job Code, since it is not defined in the corresponding data set.

I am trying to modify the value of the field "Job Code" through API I am getting the following error.(OIM11gr2). I do not get this error when updating the other fields. There is a field by the name USR_JOB_CODE in the database. When I poked around I found that there is no Job Code field in the User Form. Any ideas?
IAM-3056160:Modify User Profile request cannot set or change attribute Job Code, since it is not defined in the corresponding data set.:Modify User Profile:Job Code
oracle.iam.identity.exception.ValidationFailedException: IAM-3056160:Modify User Profile request cannot set or change attribute Job Code, since it is not defined in the corresponding data set.:Modify User Profile:Job Code
       at weblogic.rjvm.ResponseImpl.unmarshalReturn(ResponseImpl.java:237)
       at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:348)
       at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:259)
       at oracle.iam.identity.usermgmt.api.UserManager_nimav7_UserManagerRemoteImpl_1036_WLStub.modifyx(Unknown Source)
       at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
       at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
       at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
       at java.lang.reflect.Method.invoke(Unknown Source)
       at weblogic.ejb.container.internal.RemoteBusinessIntfProxy.invoke(RemoteBusinessIntfProxy.java:85)
       at $Proxy2.modifyx(Unknown Source)
       at oracle.iam.identity.usermgmt.api.UserManagerDelegate.modify(Unknown Source)
       at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
       at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
       at sun.reflect.DelegatingMethodAccessorImpl.invoke

THanks for your reply. Here is the snippet from User.xml that contains info about job code.
<entity-attribute>Job Code</entity-attribute>
<target-field>usr_job_code</target-field>
<field name="usr_job_code">
<type>string</type>
<required>false</required>
</field>
<attribute name="Job Code">
<type>string</type>
<required>false</required>
<searchable>true</searchable>
<multi-valued>false</multi-valued>
<MLS>false</MLS>
<multi-represented>false</multi-represented>
<attribute-group>Basic</attribute-group>
<metadata-attachment>
<metadata>
<name>multi-valued</name>
<value>false</value>
<category>properties</category>
</metadata>
<metadata>
<name>user-searchable</name>
<value>true</value>
<category>properties</category>
</metadata>
<metadata>
<name>category</name>
<value>Preferences</value>
<category>properties</category>
</metadata>
<metadata>
<name>bulk-updatable</name>
<value>true</value>
<category>properties</category>
</metadata>
<metadata>
<name>read-only</name>
<value>false</value>
<category>properties</category>
</metadata>
<metadata>
<name>visible</name>
<value>true</value>
<category>properties</category>
</metadata>
<metadata>
<name>encryption</name>
<value>CLEAR</value>
<category>properties</category>
</metadata>
<metadata>
<name>display-type</name>
<value>TEXT</value>
<category>properties</category>
</metadata>
<metadata>
<name>system-controlled</name>
<value>false</value>
<category>properties</category>
</metadata>
<metadata>
<name>max-size</name>
<value>512</value>
<category>properties</category>
</metadata>
<metadata>
<name>custom</name>
<value>false</value>
<category>properties</category>
</metadata>
</metadata-attachment>
</attribute>
I am able to retrieve the value of the Job Code attribute without any problem with the following code.
System.out.println("JOB Code: "+user.getAttribute("Job Code"));

The names of my contacts are not showing up when I receive text messages

The names of my contacts are not showing up when I receive text messages, only the number is showing up. How can I fix this?

This is a HUGE iOS bug.. Following a tip from another poster, I was able to fix the issue (temporarily).
This worked for me on Verizon.
I dialed *228 on my Verizon phone. I pressed "1" to activate it over the air. I then went into task manager and killed all the running apps.. Waited a few minutes.
The next text I got displayed the number correctly!.. Until I rebooted, that is.
PLEASE, call Apple and speak with a senior engineer on this. They can't fix it if they don't know it's a problem! (800) MY-IPHONE

Just transferred data to iMac from working Mac Pro that is using Parallels and Windows 7 and the Biblesoft 5 and it will not open on the iMac the only change is the my new iPhone number is OS. Any ideas?

Just transferred data to iMac from working Mac Pro that is using Parallels and Windows 7 and the Biblesoft 5 and it will not open on the iMac the only change is the new Maverick OS from the macpro Lion OS. Any ideas?
<Personal Information Edited by Host>

Setup Assistant and Migration Assistant do not restore MS Windows, it only does the OS X partition. All of your Windows stuff must be backed up and restore using a MS Windows application. If no one on this forum is able to answer your question then I'd repost it on a Parallels forum to see how other Windows users approach this.

How to find the name of message mapping

Hi folks
i want to check the name of message mapping which is used at run time. i can find the name of Interface mapping name in trace of message in SXMB_MONI.
but i am not able to find the MM name.
can some one help me .....
Regards
Gagan

> but i am not able to find the MM name.
You will find your message mapping name as class name in the pipeline step Request Message Mapping. Please search for interface mapping and below which you will find the mapping name as this format...
<Trace level ='"3" type="T"> Mapping steps 1 JAVA_JDK
com/sap/xi/tf/_<your mapping name> </Trace>
Example as similar below...

Producers this is a call that I make in the name of all users apple, you could add the LED flash to the camera of the new fifth-generation ipad please?

producers this is a call that I make in the name of all users apple, you could add the LED flash to the camera of the new fifth-generation ipad please?

This is a user to user forum. you are not addressing Apple. You can give Apple feedback here: http://www.apple.com/feedback/
BTW: You do not speak for "all users apple". I for one have a LONG list of feature I would rather see than a flash for the iPad.

Changes are not reflecting in the Quality

Hi,
These are standard SAP Components. I have imported the ESS and MSS Packages.
Actually 3 Development Components are using in my application (Tra,TraTri and TraTre).Tra is the root DC.
I have made changes to those objects and sucecessfully build without errors.
After check-in all activities those activities are working fine in Development system.
But those changes not refclecting in Quality system. So i was founded build log error in Consolidation.
I was fixed the error in the Development system and build the components without build error.
still now changes are not reflecting in the quality system.
But out of 3 DCs(Tra,TraTri,TraTre) Tra and TraTre are working fine in Quality(changes are reflecting) only problem in TraTri DC (changes are not reflecting in the Quality)..
Please help me as soon as possible....Its very help full for me
Regards
Sudhakar Reddy A

Hi Slava,
very very thanks to you for the fast reply. but one thing in my side.
When i release the activities after successful build, i export those changes and place them in the import queue of the consolidation system in the CMS.
The export in the SAP NetWeaver Developer Studio packs all selected activities into a change request, and then places them in the import queue of the consolidation system.
When the my system administrator imports this request into the consolidation system, the released changes are integrated into the DTR workspace of the consolidation system; the build server compiles the modified components.
my system administrator findout build error in consolidation system:
[wdgen] [Error]   .PersonnelNumberCheck: The mapping definition is inconsistent, the mapped context element does not exist.
     [wdgen] [Error]   com.sap.xss.tra.tri.vc.changepersno.VcTriChangePersNo --> ContextModelNode PersonnelNumberCheck [modelClass]: The context model node has not been bound to a model class (Hint: A Context model node has to be bound to a model class or mapped to a model node of another controller.)
     [wdgen] [Error]   .PersonnelNumberCheck.I_Employeenumber: The mapping definition is inconsistent, the mapped context element does not exist.
     [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output: The mapping definition is inconsistent, the mapped context element does not exist.
     [wdgen] [Error]   com.sap.xss.tra.tri.vc.changepersno.VcTriChangePersNo --> ContextModelNode PersonnelNumberCheck_Output [modelClass]: The context model node has not been bound to a model class (Hint: A Context model node has to be bound to a model class or mapped to a model node of another controller.)
     [wdgen] [Info]    com.sap.xss.tra.tri.vc.changepersno.VcTriChangePersNo --> ContextModelNode PersonnelNumberCheck_Output [supplyingRelationRole]: Supply function or supplying relation role missing (Hint: A child node which is not mapped must have either a supplying relation role or a supply function or one of its parent nodes must have a supply function.)
     [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.E_Name: The mapping definition is inconsistent, the mapped context element does not exist.
     [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return: The mapping definition is inconsistent, the mapped context element does not exist.
     [wdgen] [Error]   com.sap.xss.tra.tri.vc.changepersno.VcTriChangePersNo --> ContextModelNode PersonnelNumberCheck_Et_Return [modelClass]: The context model node has not been bound to a model class (Hint: A Context model node has to be bound to a model class or mapped to a model node of another controller.)
     [wdgen] [Info]    com.sap.xss.tra.tri.vc.changepersno.VcTriChangePersNo --> ContextModelNode PersonnelNumberCheck_Et_Return [supplyingRelationRole]: Supply function or supplying relation role missing (Hint: A child node which is not mapped must have either a supplying relation role or a supply function or one of its parent nodes must have a supply function.)
     [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Type: The mapping definition is inconsistent, the mapped context element does not exist.
     [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Message: The mapping definition is inconsistent, the mapped context element does not exist.
     [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Log_No: The mapping definition is inconsistent, the mapped context element does not exist.
     [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Field: The mapping definition is inconsistent, the mapped context element does not exist.
     [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.System: The mapping definition is inconsistent, the mapped context element does not exist.
     [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Message_V1: The mapping definition is inconsistent, the mapped context element does not exist.
     [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Message_V3: The mapping definition is inconsistent, the mapped context element does not exist.
     [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Message_V2: The mapping definition is inconsistent, the mapped context element does not exist.
     [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Log_Msg_No: The mapping definition is inconsistent, the mapped context element does not exist.
     [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Number: The mapping definition is inconsistent, the mapped context element does not exist.
     [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Message_V4: The mapping definition is inconsistent, the mapped context element does not exist.
     [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Parameter: The mapping definition is inconsistent, the mapped context element does not exist.
     [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Id: The mapping definition is inconsistent, the mapped context element does not exist.
     [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Row: The mapping definition is inconsistent, the mapped context element does not exist.
     [wdgen] [Error]   com.sap.xss.tra.tri.vc.changepersno.VcTriChangePersNo --> ContextValueAttribute EmployeeName [readOnly]: The context attribute has to be read-only. (Hint: As the mapped context attribute is read-only this attribute has to be read-only, too.)
I was fix error in my development system with out any build errors. still now not working ...pls give me any suggestion.i dont have access to consolidation system.
Regards,
Sudhakar

Changes to subtasks are not reflected in the summary task

I use Project Professional 2013.
Changes to subtasks are not reflected in the summary tasks. This includes both work and actual work as well as % complete. The tasks are all auto scheduled. Is there a setting that I need to change?

The only way I know to make that happen is if calculate project after every edit is disabled (See Options, Schedule tab).
Does this happen in all project files, for other PCs near you and do you have SP1 installed for Project 2013?
Rod Gill
Author of the one and only Project VBA Book
www.project-systems.co.nz

Query changes are not reflecting in the Workbook.

Hi All,
I have modified the query by adding attributes. But the changes are not reflecting in the workbook.
Do i need to insert the query again in the workbook or is there any option that will reflect the changes in the workbook
Thanks in Advance,
Suneel.

Hello Suneel,
if you insert the query again, it will work, but it is not the best way to delegate the query changes to the workbook.
Just open your query from within your workbook (BEx menu 'change global definition') and use the green button at the top left in order to transfer the new query structure to the workbook. The query will be executed and you should see the changes.
Don't forget to save the workbook afterwards.
Regards,
Kirill

Owb 11.2.0.3 changing the name of a mapping is not reflected in the process

Similar Messages

Maybe you are looking for