OWB 11g

OS:Windows2003 server
DBMS:Oracle 11gr1
I have installed oracle 11g on my server.Now I am trying to execute demo scripts provided by oracle for sample.when I execute loadall.tcl, project is created successfully (createprj.tcl) but when it start executing "createlocs.tcl" it is giving below error
OMB+> source loadall.tcl
Project OWB_DEMO created
OMB00001: Encountered OMBINSTALL OWB_TARGET_USER at line: 1, column: 1. Was expecting one of: "OMBDISCONNECT" ...
"OMBCOMMIT" ...
"OMBROLLBACK" ...
"OMBSAVE" ...
"OMBREVERT" ...
"OMBDISC" ...
"OMBCC" ...
"OMBDCC" ...
"OMBCAC" ...
"OMBDAC" ...
"OMBENV" ...
"OMBSTATS" ...
"OMBLOCK" ...
"OMBUNLOCK" ...
"OMBHELP" ...
"OMBCONNECT" ...
"OMBCONN" ...
"OMBSEED" ...
"OMBINSTALL" "OWB_REPOSITORY" ...
"OMBINSTALL" "WORKSPACE" ...
"OMBDEINSTALL" ...
"OMBMLSUPDATE" ...
"OMBINSTALL" "OWB_RAC" ...
OMB+> OMBDISCONNECT
what should I do?

Yes I update the owbdemoinit.tcl, repository name was missing in createprj.tcl I added it in OMBCONNECTION then execute ,Project is created by doing this.But failed in execution of Createlocs.tcl as discribed above.
In Demo (owbdemoinit.tcl) repository name is not mentioned to connect?

Similar Messages

Error VLD-1108 while validating the mapping in owb 11g

Hi All,
I am using owb 11.1.0.7.0. I am new to owb 11g. I am getting the following error while validating the mapping
error: VLD-1108 . Operator requires more input or output connections in order to generate mapping code.
I am using a function as operator and mapping it with the table.
Please tell me the solution for this. Its urgent
Thanks in advance,
Siva

Hi,
u must be using a procedure or table function that is called in the mapping for execution. When writing the function u would have specified 3 inputs but in the mapping u would have given only 2. check the number of inputs and make sure they match.
Regards
Bharadwaj Hari

Error while importing .MDL file to OWB 11g

Hi
I have a mdl file which is generated by OWB 10g, when i am importing it to OWB 11g it is giving message that please check if the disk is not full of write protected. i have given the access privilage to oralce folder.
i am using windows vista
Please help

Do yo
u have the software installed from a different user executing the software? If a different user, does the user have access to the sub-directories under owb\bin for write?
Also the directory where the MDL file is being imported from is where by default the log file will be, you can change this directory to somewhere you can write.
Cheers
David

HOW TO INSTALL ODI 11g / OWB 11g IN WINDOWS SERVER 2008 R2 (64 BITS)

Hi everybody,
I have a serious problem.
Last week we buy a new server with Windows Server 2008 Std. R2 x64, for a new project. I tried to install the RDBMS Oracle 11g R2 (x64) without problems, but when i try execute the "Design Center" contents in OWB, show me the error: 0xc0000018
Then, I´m thinking in install Oracle Data Integrator to solution it, but i`ve read that neither can install on 64 bits system... This is true?
Somebdoy knows how can I install OWB 11g / ODI 11g in a Windows 2008 Server 64 bits?
Thanks & Regards!

OWB 11G Will have been installed with the database, it now ships with 11G.
Check you are on a supported platform for design centre using the certification matrix.
Quick google search for you regards 0xc0000018 :
Problem in Lunching OWB Design Center

Setting END_DATE in OWB 11g R1/R2 SCD type 2

Hi
I have this issue which needs an immediate solution. The SCD2 design in OWB 11g R1/R2 works well except that it does not allow a programmer to populate the value of END_DATE with a field from source.
I observed that one can set the value of end_date in the dimension properties (via inspector) for initial records/open records.
a. default effective time of initial record and
b. default effective time of open record
My question is for the above two properties being set on the SCD History logging properties on target level in mappings, can we set them to a particular date field coming in from the source?
The only work around I found was to have a function which returns me a particular value from the source which can be called within the properties of these two fields, but other than that, we cannot directly populate the END_DATE field as it is a derived field within the SCD2 logic generated in the background.
Please if you could answer this it would be great
Birdy

Hi Oleg
I want the STA_FROM to drive my DIM_TO as well
So I may have sets of records say
Business/Natural key : Account number
Triggering column: Name
Suppose I load all of this today
Account_number STA_FROM Name
1001 01-aug-2010 Dummy1
1001 03-aug-2010 Dummy2
1001 05-aug-2010 Dummy3
1001 07-aug-2010 Dummy4
1002 01-sept-2010 Dummy_1
Hence Dimension data will be
Account_key Account_number EFFECTIVE_DATE END_DATE Name
1 1001 01-aug-2010 03-aug-2010 Dummy1
2 1001 03-aug-2010 05-aug-2010 Dummy2
3 1001 05-aug-2010 07-aug-2010 Dummy3
4 1001 07-aug-2010 31-dec-9999 Dummy4
5 1002 01-aug-2010 31-dec-9999 Dummy_1
If you notice, I am driving both Effective and end date by the STA_FROM
I have already achieved this in the hard coded SCD logic by using Lead function to derive my end dates for "force-closing" records.
But the SCD wizard does not allow us to drive the value of end date based on a field coming from the source. Now in my case, the STA_FROM can also be value of an input load date parameter in some cases.
It would have been nice to allow population of END_DATE on target dimension operator instead of giving only the option of setting it in the operator properties.
Hope its much clearer now
Birdy

Missing objects when created a OWB 11g owner/user

h4. i created a new owb owner and user using repository, but apparently no objects (tables,views,synonyms,function and etc) has been "imported" or copy from OWBSYS to the owner.
h4. - Creation of OWNER is successful using repository
h4. - Adding a USERS is successful
h4. how can i copy or create a new OWB owner that has a objects that is same with OWBSYS? help please im new with 11g
h4. version: 11.2.0.1.0

Hi,
Starting from OWB 11g all the metadata and audit information will be owned by OWBSYS user unlike OWB10g where in the metadata and audit information
used to be created under respective repository owner.
There will be only one OWB repository schema (i.e OWBSYS)per database
Initially there won't be any objects under OWBSYS. Once you create a new workspace then all the objects will be created under OWBSYS.
And the new owner will not have any objects, all the objects will be owned by OWBSYS.
The workspace owner user is used to adminster the workspace and users.
This is correct behaviour. No need bother about this. So no need to import any objects under this database user.
The objects i referred previously are OWB design objects like mappings,transformations,modules,projects.
If you want to import/create the OWB design objects you have to connect to the OWB design center and import the objects using MDL utility or create new objects.
The metadata about these design objects will be stored in the tables owned by OWBSYS.
Regards,
Pnreddy

OWB 11g Problem in running Process flow

I’ve build a process flow as described in “Getting Started with Oracle Warehouse Builder 11g”. But if I run the process flow I get a warning message “You have to deploy this object before running” followed by the error RTC-5170: The selected objects do not require deployment as they are all up to date in the Control Center.
Therefore I’m not able to run the process flow. What’s wrong? It looks so easy in Getting Started but it doesn’t work.
I’ve found two threads regarding this error from last year in this forum. But there is no solution for OWB 11g.
Has anyone an advice for me?

I've successfully installed OWF as described in Installation guide (all components are on the sam server).
But when I deploy a workflow in OWB I get some errors. In the job details
I find ORA-00942 and RPE-02053. It seems that the workflow repository is missing.
Are there additional steps for creating a workflow repository?
Or what is wrong? All installation logs (wf.log and workflow.log) are without errors and with success messages.
Any idea?

Help with Understanding Workspaces in OWB 11G

Hi
We are planning to upgrade a 10.1.0.3 repository to 10.1.0.4 via the upgrade scripts and then migrate the entire environment to a new server with an 11g database. Also we need to migrate a separate 10gr2 repository and target schemas to the same 11g database.
I have been reading the documentation and can see that the repository (OWBSYS) can be split into separate workspace owners that you can assign users to.
I have looked at the Oracle tutorial for OWB 11g and can see it asks for a Workspace Owner User Name and also a Workspace Name. What is the difference between these? If you have multiple Workspaces do these appear as separate schemas on the database and, if so, do these have the Workspace Owner User Name or the Workspace Name?
In our 10.1.0.3 database we have a design repository A, and a separate runtime repository with a runtime owner and runtime user schema.
In the 10GR2 database we have a design repository B (containing design and runtime metadata).
I am thinking of creating one 11G Workspace for the 10.1.0.3 repository data and another workspace for the 10GR2 data. However, would the workspace owner user names need to be the same i.e.'A' and 'B'?
Any advice would be appreciated.
Thanks
GB

This is what I've learned so far:
You're repository will always be on the OWBSYS schema. So if you have 2 repositories and plan do put them both on the same database then you'll end up with 1 repository with 2 workspaces.
All the metadata is stored on the OWBSYS schema.
The workspace owner will be the user with most privileges on that workspace and can have a different name of the workspace.
You can add more users (besides the workspace owner) to any of the workspaces.
hope it helps... and please someone correct me if I'm wrong.

Dynamic flat file loading in OWB 11g

Hi,
I'm working on owb 11g, i need to load multiple files into tables having the same file name where only the date and file sequence number changes. The files are of format:
FileA_2009_1
FileA_2009_2
FileA_2009_3,etc....
How can i dynamically change the files and load to one table. Can this be achieved through external tables or sql* loader? Is there any such new feature in OWB 11g?
Rgds
Rex

Hi
SQLLoader mappings have the data filename as an optional input parameter (a fully qualified name can be passed). So you could have a loop to get the names and call the mapping. If it was External table you'd have to do an alter table to set the data file. If the filenames are static you can configure the ext table and mapping with the names.
Cheers
David

OWB 11g Repository Assistant - Error occured in 'processSPAWN'

Hello,
I tried to create OWB 11g workspace on Oracle 11.1.0.6, but repository Assistant fails every time on the same step.
If I run the last command manually ('wholeLine') it works fine.
... I am in processSPAWN ...
wholeLine =../unix/jvm.sh -classpath ../../lib/ext/transx.zip:../../../lib/xschema.jar:../../../lib/xsu12.jar:../../../rdbms/jlib/xdb.jar:../../lib/int/rtpplatform.jar:../../lib/int/rtpcommon.jar:../../../jdbc/lib/ojdbc5.jar:../../../lib/xmlparserv2.jar:../../../sqlj/lib/runtime12.jar:../../../jdk/jre/lib/rt.jar oracle.xml.transx.loader (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=%host)(PORT=%port))(CONNECT_DATA=(SERVICE_NAME=%serviceName))) %user %password ../../browserasst/views/owb_uprop_nls.xml
after executing the output
(Spawn Token) Error loading Java into DB:
Error occured in 'processSPAWN': java.io.BufferedInputStream@1b94ea2
[processSPAWN]: A spawned program error. Exception = java.lang.Exception: Error occured in 'processSPAWN': java.io.BufferedInputStream@1b94ea2
Get the error, stop processing other tokens...
Exception = Exception occured in 'processSPAWN'. java.lang.Exception: Error occured in 'processSPAWN': java.io.BufferedInputStream@1b94ea2
java.lang.Exception: Exception occured in 'processSPAWN'. java.lang.Exception: Error occured in 'processSPAWN': java.io.BufferedInputStream@1b94ea2
at oracle.wh.service.impl.assistant.ProcessEngine.processSPAWN(ProcessEngine.java:1019)
at oracle.wh.service.impl.assistant.ProcessEngine.processFileTokens(ProcessEngine.java:736)
at oracle.wh.service.impl.assistant.ProcessEngine.createOWBRepository(ProcessEngine.java:294)
at oracle.wh.ui.install.assistant.wizards.AssistantWizardDefinition$1.runTask(AssistantWizardDefinition.java:564)
at oracle.ewt.thread.TaskScheduler.runTask(Unknown Source)
at oracle.ewt.thread.TaskScheduler.processTask(Unknown Source)
at oracle.ewt.thread.TaskScheduler$TaskQueue.run(Unknown Source)
at oracle.ewt.timer.Timer.doRun(Unknown Source)
at oracle.ewt.timer.Timer.run(Unknown Source)
at java.lang.Thread.run(Thread.java:595)
[executeOwbReposOrRuntime]: Error occurred during Seed OWBSYS. Exception =java.lang.Exception: Exception occured in 'processSPAWN'. java.lang.Exception: Error occured in 'processSPAWN': java.io.BufferedInputStream@1b94ea2
java.lang.Exception: Exception occured in 'processSPAWN'. java.lang.Exception: Error occured in 'processSPAWN': java.io.BufferedInputStream@1b94ea2
Please help.

Fixed by changing parallel_max_servers init parameter.
old value was 135
new value is 50

New Features in OWB 11g vs. OWB 9.2

Hi
Can you share what are the new features/functionalites present in OWB 11g as compared to OWB 9.2?
Thanks

... 11g R1 has the same functionality like 10gR2 >= 10.2.0.4.
In 11g R2 BETA you can use all databases (like Data Integrator) to run the mappings, not only oracle. And you can deploy the mappings as web services.
Regards,
Detlef

How to implement SCD type 2 in OWB 11g

Hi all,
I would like to know that how to implement SCD type 2 in OWB 11g.
Actually I have tried to implement it but the target table which contains the effective_date and expiration_date are null after running the mapping.
I have set the effective date and expiration date settings in the SCD tab of dimension object.
Kindly help me the same if anyone knows.
Kind regards,
shikha

You were able to get OWB11g to move data?
Are you running on a 64-bit windows server? I could not get it to do a basic data move on this type of server install.

Installing Oracle Workflow for using OWB 11g

Hi,
I am using OWB 11g, how to install oracle work flow in that?
WIll it be inbuilt with OWB 11g?
Edited by: user9145626 on 23 Mar, 2010 2:42 PM

Hey i found wfinstall.bat file in this location "C:\product\11.1.0\db_1\owb\wf\install"
but while trying to install this i gave the following credentials:
WORKFLOW ACCOUNT:owf_mgr (by default this came)
WORKFLOW PASSWORD:owf_mgr (i dont know what to give here?)
TNS CONNECT DESCRIPTOR:orowb (i dont know what to give here too.)
i got the following pop up stating;
This is the log i got:
Workflow Configuration Assistant 2.6.4.0.0 - Windows XP
WFCA Version: : WorkflowCA.java 26.106 2005/06/29 04:33
WorkflowCA:
WorkflowCA: Workflow Configuration in progress...
WorkflowCA: Tue Mar 23 20:28:00 IST 2010
WorkflowCA:
WorkflowCA: Screen width -1024-, screen height -768-
WorkflowCA: Provide Workflow Account, Password, SYS Password & TNS Connect Descriptor parameters
WorkflowCA: Workflow Configuration has completed with error.

Is owb 11g r2,supported by 64 bit windows 2008 server

is owb 11g ,r2 supported on 64 bit windows 2008 server.
is it true that : OWB 11g,r2 is supported only for 32 bit windows 2008.

There is no 64b client for windows at this time. You can check on Oracle for available downloads.
http://www.oracle.com/technetwork/developer-tools/warehouse/downloads/software/index.html

Error java.sql.exception when setting up repository for OWB 11g

Hey all,
I am encountering the following error on the last step of Repository Assistant, that is, while trying to set up the design repository in OWB 11g:
"The Warehouse Builder workspace installation failed
java.sql.SQLException : ORA-00942 table or view does not exist"
Below is an excerpt from the the log file:
main.TaskScheduler timer[5]20080620@14:51:54.054: 00> oracle.wh.service.impl.assistant.ProcessEngine.processSQLUserToken(ProcessEngine.java:1106)+> at java.lang.Thread.run(Thread.java:595)
main.TaskScheduler timer[5]20080620@14:51:54.054: 00> oracle.wh.service.impl.assistant.ProcessEngine.display(ProcessEngine.java:1572): Exception = java.sql.SQLException: ORA-00942: table or view does not exist
main.TaskScheduler timer[5]20080620@14:51:54.054: 00> oracle.wh.ui.install.assistant.wizards.AssistantWizardDefinition.display(AssistantWizardDefinition.java:788): [executeOwbReposOrRuntime]: Error occurred during Workspace Installation. Exception =java.lang.Exception: java.sql.SQLException: ORA-00942: table or view does not exist
main.AWT-EventQueue-0[6]20080620@14:51:54.054: 00> oracle.wh.ui.jcommon.WhButton@a22671: WhButton setLabel rtsString = OK
main.AWT-EventQueue-0[6]20080620@14:58:17.017: 00> oracle.wh.ui.install.assistant.wizards.AssistantWizardDefinition.display(AssistantWizardDefinition.java:788): before open 'UnSuccessDialog'
main.AWT-EventQueue-0[6]20080620@14:58:17.017: 00> oracle.wh.ui.install.assistant.wizards.AssistantWizardDefinition.display(AssistantWizardDefinition.java:788): Open UnSuccessDialog ...
main.AWT-EventQueue-0[6]20080620@14:58:17.017: 00> oracle.wh.ui.jcommon.WhButton@a22671: WhButton setLabel rtsString = OK
I am new to OWB so please let me know if I've left out any information that would help in figuring out why the installation is not completing.
Thanks.

The only thing I can think of in OWB 11g is that the main schema that is used, which is OWBSYS, wasn't fully installed or it doesn't have all the tables or views it needs or they weren't created properly with the cat_owb.sal script.
Something must not have been created right. I would try to stop all OWB services with the appropriate scripts in:
<your_owb_home>owb\rtp\sql
try the stop_service.sql script.
Then try to drop the users owbsys and whatever you might have created (if it exists) for a workspace owner user. Then clean up with:
<your_owb_home>\owb\UnifiedRepos\clean_owbsys.sql
After that it is back to the drawing board from the beginning. DO these steps again that you likely did in the first place:
1. create owbsys with:
<your_owb_home>\owb\UnifiedRepos\cat_owb.sql <tablespace_name>
2. Set the control center home with:
<your_owb_home>\owb\UnifiedRepos\reset_owbcc_home.sql <your_owb_home>
*pay attention to the case of the the OWB HOME you give as a variable to the above script. It needs to match the case of your real path.
3. Finally unlock owbsys.
4. look at <your_owb_home>\owb\bin\admin\ if the rtrepos.properties file size is at '0'. If it is for some reason, rename it to something else right now.
5. Then try to run the repository assistant again.
-Greg

Accessing OWB 10g Respository through OWB 11g Client

We have an Oracle Database 10.2, we installed OWB 10.2 and created a repository.
I want to install OWB 11g Client and use the existing repository. Is this Compatable.
Thanks in advance for your suggessions.

No, there were substantial repository changes in OWB 11g, you cannot connect an OWB 11g client with an OWB 10g repository - but you can host an OWB 11g repository in a 10g database though.
Cheers
David

OWB 11g

Similar Messages

Maybe you are looking for