OWB and MS SQL Server source (10.2)

Hi all,
After installing the Gateways for MS SQL Server, configuring and testing the Database Link sucessfully, I met some issues when trying to use this Database Link for location source.
Suppose I have a Database Link named mssql. From OWB Design Center, creates a new project. Exploring this project and select to create a new Location Module. On the Location Module Wizard, select the mssql Database Link; dbo for the SCHEMA. Finally press the Test button. Unfortunately the result test informed that "tables or views are not existed ..."
Does anyone have the same issues with me? Can you give me any solutions?
Thanks much,
Truong

Have you seen this product?
http://www.reqwireless.com/products-db.html

Similar Messages

Connect SQL server source from OWB

Hi,
I have to connect to SQL Server source from OWB.
I am using OWB 10.2 version and Owb is installed on UNIX platform.
I have created system DSN, made respective entries in hs/admin and edited listener.ora file.
In OWB Non-Oracle sorces trying to connect with ODBC connection to SQL server source.
It is throwing erorr 'ORA-28545:error diagonised by Net8 agent when connecting to an agent Unable to retrieve text of NETWORK/NCR message 65535
ORA-02063: preceding 2 lines from OWB-2339'
How to check System DSN is setup properly on UNIX or not.
Could anyone help out on this.

Hi David,
I have created db link and queried with select statement.
It has thrown following error.
" ORA-12537: TNS:connection closed".
And, I don't know how to use "trace level gateway service configuration property in the service .ora file".
I want to start from the first.
Could you please give me the guidelines on, how to connect to a Sql server source(Which is on Remote Server) from OWB.
What are the prerequisites and steps.
Thanks for your help,
Shaik.

Update/Insert mode couldn't apply to SQL Server source via Transparent Gateway.

Hi all,
OWB version is 9.0.2.56,database version is 9i Release 2.
When set load type to "Insert",mapping works fine from SQL Server to Oracle table,via Transparent Gateway 901.
But "Update/Insert" always runs error with "Fatal error or maximum number of errors exceeded".while I define both source and destination table to oracle tables in mapping,"Update/Insert" works file.
Any suggestion?

Hi Ignor,
Thanks for your reply!
The SQL Server version is SQL Server 2000.
I just want to ETL data from a SQL Server table via Transparent gateway into oracle table,the source table has a increment seq field,so I want to define mapping using update/insert loading method in OWB,according to this seq field,if there is the same seq in the target table,do update,if not,insert the row.I just find out that if I use a middle table in oracle to do truncate/insert mode from SQL Server source table,then do update/insert mode from the middle one to target table,it works.But can't do directly from source to target using update/insert mode.Does this means update/insert mode only apply to mapping from local table to local table?
Regards,
Robbin

A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (p

A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that
the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)(Microsoft SQL Server, Error: 2)
The system cannot find the file specified
Cannot connect to COWBOYS.
Here are the technical details===================================
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&EvtSrc=MSSQLServer&EvtID=2&LinkId=20476
Error Number: 2
Severity: 20
State: 0
Program Location:
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean ignoreSniOpenTimeout, TimeoutTimer timeout, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString connectionOptions, SqlCredential credential, TimeoutTimer
timeout)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(TimeoutTimer timeout, SqlConnectionString connectionOptions, SqlCredential credential, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, SqlCredential credential, Object providerInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance,
SqlConnectionString userConnectionOptions, SessionData reconnectSessionData)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection)
at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.SqlServer.Management.SqlStudio.Explorer.ObjectExplorerService.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
===================================
The system cannot find the file specified
I have tried from so many forms. This is so frustrating. Thank for everyone/anyone who wants to help. So this is what happened: I had to uninstall my previous sqlserver 2012(which worked great) for some reason, and I uninstalled everything from that download.
Then I installed the trial edition of sql server 2012 (64 Bit) and It wouldn't connect to the database. (Error mentioned above.) My local DB is COWBOYS. (COWBOYS is also my computer name.) After this, I have tried downloading sqlexpress and sqlserver 64bit
many times and cannot connect to my local DB.
How do I connect to my Local DB?
Also, I think this might help: (When I run sqlserve.exe, which I was able to find in C:\Program Files\Microsoft SQL Server\110\LocalDB\Binn, I get an error: Your SQL server installation is either corrupt or has been tampered with(Error getting
instance ID from name). Please uninstall then re-run setup to correct this problem.
I would happily re install it, if it wasn't my 20th time.
I don't have any remote connections, I don't use username/password, only window authentication. I work mostly on visual studio, but without able to store /retrieve data, I don't know how to survive.
May be the solution is very simple, but I am too frustrated.
Some of the things I have tried:
From a command prompt, enter one of the following commands:
net start "SQL Server Agent (MSSQLSERVER)" OR
net start "SQL Server Agent(instancename)"(for instance)
on my sql configuration, I cannot start anything because there is nothing there to start. I can post more details, if that would help. Also, some more details about the error:
Details
Product:
SQL Server
ID:
2
Source:
MSSQLServer
Version:
10.0
Component:
SQLEngine
Message:
An error has occurred while establishing a connection to the server. When connecting to SQL Server, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error:
40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
Explanation
SQL Server did not respond to the client request because the server is probably not started.
User Action
Make sure that the server is started.
Version:
9.0
Component:
SQLEngine
Message:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error:
40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
Explanation
SQL Server did not respond to the client request because the server is probably not started.
User Action
Make sure that the server is started.
Any one that can help me, I will be greatful. Thank you so much. p.s. please ask me anything if you have any questions.

It sounds like there are a couple things going on here. First check if you have a successful install of SQL Server, then we'll figure out the connection issues.
Can you launch SQL Server Configuration Manager and check for SQL Server (MSSQLSERVER) if default instance or SQL Server (other name) if you've configured your instance as a named instance. Once you find this, make sure the service is started.
If not started, try to start it and see if it throws an error. If you get an error, post the error message your hitting. If the service starts, you can then launch SSMS and try to connect. If you have a default instance, you can use the machine
name in the connection dialog. Ex: "COWBOYS" where Cowboys is the machine name. However, if you named the SQL Server instance during install, you'll need to connect using the machine\instance format. Ex: COWBOYS\Romo (where Romo
is the instance name you set during install).
You can also look at the summary.txt file in the SQL Server setup error logs to see what happened on the most recent install. Past install history is archived in the log folder if you need to dig those up to help troubleshoot, but the most
recent one may help get to the bottom of it if there is an issue with setup detecting a prior instance that needs to be repaired.
Thanks,
Sam Lester (MSFT)
http://blogs.msdn.com/b/samlester
This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
"Mark as Answer" and
"Vote as Helpful" on posts that help you. This can be beneficial to other community members reading the thread.

VFPOLEDB and MS SQL Server Express 2014

I can install VFPOLEDBSetup.msi on machine with Windows 7 - 64bit and MS SQL Server Express 2012, but I cannot install VFPOLEDB on machine with Windows 7 - 64bit and MS SQL Server Express 2014. Is there a problem with MSSQL 2014?

I don't think this is related to what Man-wai Chang points to, because the dropping of OLEDB just means continued development of data access drivers for SQL Server are ODBC only now, not that the OLEDB branch of any database is broken intentional.
That said, it's quite cumbersome to find out what your detail problem is. Do you expect installation of Win7, MSSQL2014 and VFPOLEDB to eventually reproduce and see your problem? You could bet on your luck someone else had the same combination, but there
are not a lot of VFP developers left over and they may already be using Win8 or 8.1
Is there any error in setup? Are you just looking at the wrong place (eg OLEDB providers are not lilsted in ODBCAdmin)? VFP OLEDB is and always will be a 32bit driver and can only be seen and used from 32bit processes.
Bye, Olaf.
PS: You can use 32bit drivers from a 64bit MSSQL Server as it manages pools of 32bit and 64bit processes. For example see how to do via linked server http://fox.wikis.com/wc.dll?Wiki~VisualFoxProDataFromSQLServer. The detail is in allowing inprocess
usage of the driver.
Also see this:
Create a new SQL Server Integration Services(SSIS) package.
Add a Data Flow Task(DFT) to the package.
Select the DFT, and go to Data Flow designer page.
Add a OLE DB Source to the package.
Double-click the OLE DB Source, click “New” > “New” to create a connection to Visual FoxPro.
In the Connection Manager, please select “Microsoft OLE DB Provider for Visual FoxPro”
Type the file path of a Visual FoxPro database(e.g. C:Address.dbc).
Test the connection by clicking button “Test Connection”
Click “OK” > “OK” to apply.
Now, we can select a table from the Visual FoxPro database in the OLE DB Source editor.
(quoted from http://blogs.lessthandot.com/index.php/datamgmt/datadesign/think-carefully-which-sql-server-you-wan/)
Olaf Doschke - TMN Systemberatung GmbH
http://www.tmn-systemberatung.de

Siebel 8.1 and MS SQL Server 2000

I am upgrading our Siebel 7.8 instance running on MS SQL Server 2000 to Siebel 8.1 and MS SQL Server 2008. My original intent was to upgrade the database first (so that we would be runing Siebel 7.8 on MS SQL Server 2008), and then upgrade the application to 8.1.
I have been running into resource issues with regard to the SQL Server upgrade. My question is:
Can Siebel 8.1.1 run on MS SQL Server 2000?
Thanks.
-- Ken

Hi
You can migrate your 7.8 to MSSQL 2008 as this is a supported platform.
Usually in an upgrade you will upgrade your development db platform as a source of your 8.1 upgrade process.
For information, a reference document is the Siebel System Requirements and Supported Platforms aka SRSP
[SRSP 7.8|http://download.oracle.com/docs/cd/E11886_01/V7/CORE/SRSP_78/SRSP78.pdf]
[SRSP 8.1| http://download.oracle.com/docs/cd/E11886_01/V8/CORE/SRSP_81/SRSP_81.pdf]
Please refer to the online version as this document is frequently updated.
Enjoy
Evtloglvl

ODI - Delete Level0 through Microsoft SQL Server Source?

Is it possible to use ODI to delete members through a Microsoft SQL Server Source and a Planning target? I can load the members with a MS SQL source but can't seem to get the process to work when i add an operator (no matter which one i choose Delete IDescendants or Delete level0). I am able to get it to work with a file but would rather use the table to run the delete as well.

Using a relational table should be no different than using a flat file source.
I take it no errors are being generated, have you checked the SQL that is being generated in the operator, you should be able to lift it out of the step in the operator and run against sql server to see if the correct records are being returned.
Cheers
John
http://john-goodwin.blogspot.com/

Problem with provisioning and external SQL server connection

I am configuring IPAM 2012 R2 on a our management server. Completed the first step by enabling the feature. No issues.
Now I am on the Provisioning IPAM step. I get to the Configure Database step...
I choose Microsoft SQL server,
What should those values be in the Server name and Database name fields. Instructions show fqdn or ip address but that doesnt seem to be working for me.
I get the following error at the end of the Provisioning IPAM wizard,
IPAM Deployment failed with the following error.
Failed to connect to database server. Check the database name, connectivity and remote access.
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections.
(provider: TCP Provider, error: 0 - No connection could be made because the target machine actively refused it.)
You can restart this provisioning wizard from the IPAM overview page.
From the management server I have tested the SQL Connection with a udl file. I used myServer\myInstance and it works. It reports that I have made the Connection to the server and database with the sql credentials i have provided.
Thanks

Ran
into a problem with connecting to the DB on the SQL server from the IPAM server. The Dba and I checked the target SQL instance was enabled TCP and listening on a valid TCP port. SQL server was set to use port 1443 for incoming connections.
IPAM was set by default to use 1433.
Also used
netstat-n to identify issue and verified 1443 on SQL server was
being used. Made the correction under the IPAM provisioning wizard and connected to the database. Fixed.
Important note I was able to connect to the database with a .udlfile
without any issues
Also note that 2012 R2 IPAM only supports 2012 SQL Enterprise. Why?

After restoring SharePoint farm backup ( The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connection)

Hi,
I have taken farm back and restore it in new UAT environment, while access to the main site getting the below error:
Error
An unexpected error has occurred.
Troubleshoot issues with Microsoft SharePoint Foundation.
Correlation ID: 866476f3-23dd-4e1e-97af-bffc62cc2d57
Date and Time: 7/15/2014 11:26:35 AM
When i checked in log i got below error
System.Data.SqlClient.SqlException: A network-related or instance-specific
error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40
- Could not open a connection to SQL Server) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject
stateObj) at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecu...
Thanks in advance
Said Al Balushi

Hi Wendy,
i have checked all below points, every thing is fine but still i am getting the same error.
Check SQL services are runing
Check remote conenctions are enabled
Check SQL Browser service is runing
Check TCP/IP protocal enabled at SQL server
Check out windows firewall setting
Thanks,
Said

Connecting to the LOB system has failed. A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is

hi ,
when generate the schema , i got the below error, please any one put your inputs:
Connecting to the LOB system has failed. A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server
is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server).

thaks shanky,
but facing another , after generate schema from WCF_SQL, im unable get elements in my schema.
this is schema generate from storeprocduer , but thru WCF-sql im unable get the elements like
id, name
<xsd:schema targetNamespace="urn:schemas-microsoft-com:sql:SqlRowSet2" xmlns:schema="urn:schemas-microsoft-com:sql:SqlRowSet2" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:sqltypes="http://schemas.microsoft.com/sqlserver/2004/sqltypes" elementFormDefault="qualified">
<xsd:import namespace="http://schemas.microsoft.com/sqlserver/2004/sqltypes" schemaLocation="http://schemas.microsoft.com/sqlserver/2004/sqltypes/sqltypes.xsd" />
<xsd:element name="Test.dbo.sample">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="id" type="sqltypes:int" minOccurs="0" />
<xsd:element name="name" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="1000" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:schema>
<Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
<id>18</id>
<name>BIRADAR</name>
</Test.dbo.sample>
<Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
<id>18</id>
<name>BIRADAR</name>
</Test.dbo.sample>
<Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
<id>19</id>
<name>sw</name>
</Test.dbo.sample>
<Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
<id>18</id>
<name>BIRADAR</name>
</Test.dbo.sample>
<Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
<id>14</id>
<name>swe</name>
</Test.dbo.sample>
<Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
<id>13</id>
<name>se</name>
</Test.dbo.sample>

A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections.

A network-related or instance-specific error occurred while establishing a connection to SQL Server. The
server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26- Error:Locating Server\instance Specified)
How Can i solve this?

1. Make sure SQL Server Service is running
2. If a named instance, make sure SQL Server browser service is running
3. Make sure SQL Server is configured to allow remote connections
4. Examine the SQL Server error log for messages confirming that SQL is listening on the expected network interfaces and ports
5. Test server connectivity with PING from the client machine
6. Test port connectivity using TELNET or PowerShell to the server and port (from step 4) from the client machine. For example
a. TELNET <server-name> 1433
b. PowerShell: 1433 | % { echo ((new-object Net.Sockets.TcpClient).Connect("YourServerName",$_)) "server listening on TCP port $_" }
7. Check firewall settings if step 5 or 6 connectivity test fails
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

Java and MS SQL Server 2000 problem, please help

please help me. I am using java and MS SQL Server 2000, and I'm trying to access and verify the login. I'm getting the following error message: [Microsoft][ODBC SQL Server Driver]Invalid Descriptor Index
Can any please help in this regard.
String userNumber = (String)userNumField.getValue();
char[] userPasswordArray = userPasswordField.getPassword();
String userPassword = new String(userPasswordArray);
     try {
            Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
            java.sql.Connection connection = java.sql.DriverManager.getConnection("jdbc:odbc:Dikolobe_Data");
            java.sql.PreparedStatement statement = connection.prepareStatement(
                    "SELECT USER_NUMBER, USER_PASSWORD, USER_CLASS, USER_STATUS " +
                    "FROM SYS_USER " +
                    "WHERE (USER_NUMBER = ? AND USER_PASSWORD = ?);");
            statement.setString(1, userNumber);
            statement.setString(2, userPassword);
            java.sql.ResultSet result = statement.executeQuery();
            if(result.next()) {
                String userStatus = result.getString(4);
                if(userStatus.equals("logged on")) {
                    String loginErrorMessage = "User with number: " + userNumber + " is already logged on.";
                    javax.swing.JOptionPane loginErrorPane = getNarrowOptionPane(72);
                    loginErrorPane.setMessage(loginErrorMessage);
                    loginErrorPane.setMessageType(javax.swing.JOptionPane.ERROR_MESSAGE);
                    javax.swing.JDialog loginErrorDialog = loginErrorPane.createDialog(null, "Login Error");
                    loginErrorDialog.setVisible(true);
                else {
                    String userClassification = result.getString(3);
                    if(userClassification.equals("Administrator")) {
                        AdminHomePage newAdminHomePage = new AdminHomePage();
                        newAdminHomePage.setVisible(true);
                    else if(userClassification.equals("Educator")) {
                        EduHomePage newEduHomePage = new EduHomePage();
                        newEduHomePage.setVisible(true);
                    statement = connection.prepareStatement(
                            "UPDATE SYS_USER SET USER_STATUS = ? " +
                            "WHERE USER_NUMBER = ?");
                    statement.setString(1, "logged on");
                    statement.setString(2, userNumber);
                    statement.executeUpdate();
                    dispose();
            }

Doesn't the following link give you enough information?
http://www.google.com/search?q=invalid+descriptor+index
Anyway .. This error means that the given ResultSet column index which you're trying to retrieve the value from is out of the range.

How to install and use sql server express 2014 with tools

I am a student and have an assignment that requires I use either mysql or sql server, so I chose to download and install sql server express 2014 with tools, but after installation was complete all I can see is sql server 2014 import and export data (64-bit)
and I have no clue what to do wiith it...I had used sql server 2008 a couple of years ago and it was easy, but this is very complicated, I have been trying to get this done for 2 days now, so someone please help me and tell me what I am doing wrong.

Hi,
It seems you did not installed complete software. Make sure you have downloaded below from
SQL Server Express Download link
Express with Advanced Services (SQLEXPRADV) when you click on Get started button on page displayed by clicking on above link. This download includes Sql Server Management Studio as well.
Before moving I would Like you to first read
Hardware and Software requirements
Please refer
how to install SQL server 2014 express
Above Link is for Enterprise edition but you can use it for express as well. When you reach page feature selection please select all features to install.
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles

Replication between Oracle Server and MS SQL Server

Hello,
Does anybody know of a well known or reliable software that can do data replication between Oracle Server and Microsoft SQL server.
I suppose I can write my own version using Heterogenous Services in Oracle but I would like to know if such an automated replication between Oracle and SQL is available commercially.
Thank you.

Viacheslav Ostapenko wrote:
Sorry, Aman,
I couldn't find any info about replication to MS SQL. Is it possible at all? Could you provide link where we can read about this? It could be very interesting.Sorry Viacheslav, even I couldn't find anything for the same. I am not sure that it can be done or not, I haven't heard anyone in my contact doing so. The only place where I have seen Streams being used around me is within Oracle db only. May be someone else can help if he/she has done it.
Aman....

How to create ODBC connection between Oracle 10g and MS SQL Server

Hi,
Can someone help us with the steps to create an ODBC connection between Oracle APPS using Oracle 10g database and MS SQL Server.
Requirement is to extract the transactional data from MS SQL Server on a daily basis and dump it into Oracle tables for an interface to be run. Currently it is being done through Dataloader tool which we feel is causing the data issue with Arabic characters. We want to create the ODBC directly between Oracle and MS SQL Server and check if the data is being pulled correctly.
The data is in sql server 2000 which has data in Arabic_CI_AS character set which is moved to Oracle 10.2.0.3 database with characterset AL32UTF8. The table data is moved to oracle using the dataloader 3.6 standard edition licensed version. We cannot change the character set of Sql Server 2000.
Please help
Thanks
Shanil

Hi,
If you're trying to PULL data from SQLServer into an Oracle database, you wouldnt use Oracle ODBC driver for that, so you may want to post in the Heterogeneous Services forum instead:
Heterogeneous Connectivity
If you're trying to PUSH data from SQLServer into an Oracle database, you could use ODBC but most folks use OLEDB for that, and the following note on MOS should help:
How to Create a Sql Server Linked Server With The Oracle Provider for OLE DB (Doc ID 191368.1)
As with any NLS related issue, the first thing to do is dump the codepoints of the data in the Oracle database to see if it is stored validly, rather than relying on what the data "looks like" from some tool or other. It's best to check a single row, with only a few characters in it if you can, and you can do that via
SELECT DUMP(<columname>,1016) FROM <tablename> WHERE ...
Hope it helps,
Greg

OWB and MS SQL Server source (10.2)

Similar Messages

Maybe you are looking for