OWB Error: Connection lost when assign a schedule to a process flow

I have:
- OWB 11Gr2
- Oracle DB 10Gr2 Source/Target
I have created a schedule module and set the location to be one of the target DB locations.
Create a one of schedule and scheduled for daily execution.
Open configuration of a process flow and assign with the schedule.
After this, i tried to save the repository, and occurred the error message:
"Repository Connection Error: The connection to the repository was lost, because of the following database error: Closed Connection
Exit OWB without committing."
The connection with the repository was lost and i can´t do more anything.
I tried to create a separate location for the schedule, but it don´t make difference
What´s happening?
Thanks,
Afonso

Wea re running 11.2.0.2 and
When looking at the trace log
Dump continued from file: /data02/oramisc/diag/rdbms/dpmdbp/dpmdbp/trace/dpmdbp_ora_13503.trc
ORA-00600: intern felkod, argument: [15570], [], [], [], [], [], [], [], [], [], [], []
With this query "========= Dump for incident 16022 (ORA 600 [15570]) ========
*** 2011-10-18 09:52:25.445
dbkedDefDump(): Starting incident default dumps (flags=0x2, level=3, mask=0x0)
----- Current SQL Statement for this session (sql_id=7a76281h0tr2p) -----
SELECT usage.locuoid, usage.locid, cal_property.elementid, cal_property.classname, schedulable.name || '_JOB' name, schedulable.name || '_JOB' logicalname, cal_property.uoid, cal_property.classname
, cal_property.notm, cal_property.editable editable, cal_property.customerrenamable, cal_property.customerdeletable, cal_property.seeded, cal_property.UpdateTimestamp, cal_property.strongTypeName,
cal_property.metadatasignature signature, 0 iconobject FROM Schedulable_v schedulable, CMPStringPropertyValue_v cal_property, CMPCalendarInstalledModule_v cal_mod, CMPPhysicalObject_v sched_phys, CM
PCalendar_v cal, ( select prop.firstclassobject moduleid, prop.value locuoid, 0 locid from CMPPhysicalObject_v phys, CMPStringPropertyValue_v prop where prop.logicalname = 'SCHEDULE_MODULE_CONFIG.DE
PLOYMENT.LOCATION' and prop.propertyOwner = phys.elementid and phys.namedconfiguration = 42636 union select installedmodule, '' locuoid, location locid from CMPLocationUsage_v locUse where deployme
ntdefault = 1 and not exists ( select null from CMPPhysicalObject_v phys, CMPStringPropertyValue_v prop where prop.logicalname = 'SCHEDULE_MODULE_CONFIG.DEPLOYMENT.LOCATION' and prop.firstclassobjec
t = locUse.installedmodule and prop.propertyOwner = phys.elementid and phys.namedconfiguration = 42636) ) usage WHERE cal_mod.elementid = usage.moduleid and cal_mod.elementid = cal.calendarmodule a
nd substr(cal_property.value,0,32) = cal.uoid and cal_property.logicalname='SCHEDULABLE.PROPERTY' and (cal_property.firstclassobject = schedulable.elementid or cal_property.firstclassobject = sched
_phys.elementid and sched_phys.logicalobject = schedulable.elementid) and cal_mod.owningproject = 42631 and cal_property.propertyowner = sched_phys.elementid and sched_phys.namedconfiguration=42636
ORDER BY schedulable.name || '_JOB'"
Coulöd be possible this bug
Bug 12368039 ORA-600 [15570] with UNION ALL views with Parallel steps
This note gives a brief overview of bug 12368039.
The content was last updated on: 18-MAY-2011
Click here for details of each of the sections below.
Fixed:
This issue is fixed in
* 11.2.0.3

Similar Messages

Why does FaceTime keep saying "connection lost" when we both have full bars on our wifi?

Why does FaceTime keep saying "connection lost" when we both have full bars on our wifi? My friend in Texas has tried to call my via FaceTime but for some reason, every time she does, it keeps saying "connection lost" when we both have full bars on our wifi. Keep in mind, I am from Nebraska so we have the same time zone and I have an iPod 4 while she has a iPhone of some sort but that shouldn't matter because I am still able to FaceTime my friend in California, which is two hours behind me. So, I guess I just want to know why I cannot reach my friend in Texas. Please, someone help me!
-Mukestina

Apple has released a document which is reported to address the recent FaceTime issue.
http://support.apple.com/kb/TS5419

RV082 V03 Randomly connection lost when firewall enabled.

Hardware: RV082 V03
Firmware: RV0XX-v4.2.1.02
Lan: 192.168.1.0/255
Static routing: 192.168.1.239 to 172.25.152.64/224
The unit is configured as internet gateway. 4 NAT ports are active.
When firewall disabled all works fine.
When firewall enabled I do get connection lost at random interval.
In firewall only 4 rules added to the default 3 rules. The added rules are:
1/ permit 192.168.1.22 port 25 to any
2/ permit 192.168.1.27 port 25 to any
3/ permit 192.168.1.10 port 25 to any
4/ deny any port 25 to any
I do get at random times connection lost when navigating with windows explorer on a PC with IP 192.168.1.x to a share on a PC with IP 172.25.152.74. The same happens when copying files. Sometimes it works, later it fails or reties are needed. When the firewall is switched off all runs fine.
Ping from 192.168.1.x to 172.25.152.74 allways give a <1ms response
Is there a RV082 perfomance problem or do I have a configuration problem?
Any help appreciated,
Maxim

Hi Maxim De Waele
In an access list, there is always an implicit rule at the end, this rule is:
deny any any,
For this reason your firewall does not work well, if you want to fix it, at the end you add the next statement:
permit ip any any,
It permits the traffic flow through the network, except that was previously denied,or manually you can allow only certain IP addresses.
This is an example of the configuration:
permit 192.168.1.22 port 25 to any
permit 192.168.1.27 port 25 to any
permit 192.168.1.10 port 25 to any
deny any port 25 to any
permit any to any
If this answer was satisfactory for you, please mark the question as Answered.
Thank you
Greetings, Johnnatan Rodriguez Miranda

Scheduling Mappings and Process Flows

Can you please tell me how to schedule mappings and process flows in a little detail, if any one has done that. I think OEM can be used for this but dont have any clear cut idea of doing it. Can the mappings/process flows be scheduled without using OEM console ?
Waiting for you suggestions.
rgds
-AP

Hi
You can schedule your mapping and process flows with OEM or database job.
You will find script templates in the OWB HOME/owb/rtp/sql directory
and you can scheldule them.
If you want to do it in OEM use the oem_exec_template.sql file createing an OEM job. Read the OWB documentation about it. If you have any question about it ask it, I have done this procedure many times.
Ott Karesz
http://www.trendo-kft.hu

How to schedule mappings to process flows?

Hi,
I have shceduled a calendar (Job) which is referring to a process flow. But how can I make sure that the mappings are referring to the same process flow?
E.g. I have scheduled job at 10 AM , I have created the process flow for 10 AM referring to the same scheduled job.
My understanding here is there is a hierarchy : Scheduled jobs > Process Flows > Mappings
I have configured the process flow to run it at a scheduled job, now I want the mappings to understand to run at the same time as that of the schedule.
And also when I start the process flow all the mappings should get executed.
Is there any parameter to tell the process flow that all these mappings falls under you.
Hope I have made myself clear.
Can anyone please look into this query?
Thnks in adv..

When I double click and open my process flow I am not able to see any mapping. We have stored procedures written:
ln_exists NUMBER;
LS_ERROR VARCHAR2(200);
LD_START_PERIOD_DT DATE;
LD_END_PERIOD_DT DATE;
EX_PF_NOT_VALID EXCEPTION ;
EX_SUB_PF_NOT_VALID EXCEPTION ;
EX_LAYER_NOT_VALID EXCEPTION ;
EX_MODULE_NOT_VALID EXCEPTION ;
EX_DATE_FORMAT_ERR EXCEPTION ;
BEGIN
--1: Check the Process Flow parameter value
IF IP_PF IS NOT NULL THEN
select count(*)
into ln_exists
from adm_process_flow_par
where process_flow = IP_PF;
IF ln_exists =0 THEN
RAISE EX_PF_NOT_VALID;
END IF;
END IF;
--2: Check Sub Process Flow Parameters value
IF IP_SUB_PF IS NOT NULL THEN
select count(*)
into ln_exists
from adm_sub_pf_par
where sub_pf_code = IP_SUB_PF;
IF ln_exists = 0 then
RAISE EX_SUB_PF_NOT_VALID;
END IF;
END IF;
--3:Check Layer Code Parameter Value
IF IP_LAYER IS NOT NULL THEN
select count(*)
into ln_exists
from adm_lookup_code
where lookup_type='LAYER_CODE'
and lookup_code= IP_LAYER;
IF LN_EXISTS =0 THEN
RAISE EX_LAYER_NOT_VALID;
END IF;
END IF;
--4: Check Module Code Parmeter Value
IF IP_MODULE IS NOT NULL THEN
select count(*)
into ln_exists
from adm_lookup_code
where lookup_type IN ('SOURCE_SYSTEM','SUBJECT_CODE')
and lookup_code= IP_MODULE;
IF LN_EXISTS =0 THEN
RAISE EX_MODULE_NOT_VALID;
END IF;
END IF;
--5: Check start Period date & End Period Date Format
BEGIN
IF IP_START_PERIOD_DT IS NOT NULL THEN
LD_START_PERIOD_DT := TO_DATE(IP_START_PERIOD_DT,'YYYY-MM-DD');
END IF;
IF IP_END_PERIOD_DT IS NOT NULL THEN
LD_END_PERIOD_DT := TO_DATE(IP_END_PERIOD_DT,'YYYY-MM-DD');
END IF;
EXCEPTION
WHEN OTHERS THEN
RAISE EX_DATE_FORMAT_ERR;
END;
EXCEPTION
WHEN EX_DATE_FORMAT_ERR THEN
LS_ERROR := 'Date Format is not valid ,please check (FORMAT: YYYY-MM-DD HH24 /YYYYMMDDHH24)';
SP_ERROR_REC(NULL,IP_PF,IP_SUB_PF,IP_MODULE,IP_LAYER,NULL,NULL,LS_ERROR,'SP_CHECK_PARAMETER_VALID',NULL);
RAISE_APPLICATION_ERROR(-20002,LS_ERROR);
WHEN EX_PF_NOT_VALID THEN
LS_ERROR := 'The Process Flow Value is not valid ,please check table adm_process_flow_par';
SP_ERROR_REC(NULL,IP_PF,IP_SUB_PF,IP_MODULE,IP_LAYER,NULL,NULL,LS_ERROR,'SP_CHECK_PARAMETER_VALID',NULL);
RAISE_APPLICATION_ERROR(-20002,LS_ERROR);
WHEN EX_SUB_PF_NOT_VALID THEN
LS_ERROR := 'The Sub Process Flow Value is not valid ,please check table adm_sub_pf_par';
SP_ERROR_REC(NULL,IP_PF,IP_SUB_PF,IP_MODULE,IP_LAYER,NULL,NULL,LS_ERROR,'SP_CHECK_PARAMETER_VALID',NULL);
RAISE_APPLICATION_ERROR(-20003,LS_ERROR);
WHEN EX_LAYER_NOT_VALID THEN
LS_ERROR := 'The Layer Code Value is not valid ,please check adm_lookup_code(lookup_type="LAYER_CODE")';
SP_ERROR_REC(NULL,IP_PF,IP_SUB_PF,IP_MODULE,IP_LAYER,NULL,NULL,LS_ERROR,'SP_CHECK_PARAMETER_VALID',NULL);
RAISE_APPLICATION_ERROR(-20004,LS_ERROR);
WHEN EX_MODULE_NOT_VALID THEN
LS_ERROR := 'The Layer Code Value is not valid ,please check adm_lookup_code(lookup_type IN ("SOURCE_SYSTEM","SUBJECT_CODE")';
SP_ERROR_REC(NULL,IP_PF,IP_SUB_PF,IP_MODULE,IP_LAYER,NULL,NULL,LS_ERROR,'SP_CHECK_PARAMETER_VALID',NULL);
RAISE_APPLICATION_ERROR(-20005,LS_ERROR);
END;
Can anyone throw some light on this issue?
Edited by: user11001347 on May 11, 2010 11:46 PM

Error in ECA when assigning the value to structures

Hi,
There are errors in ECA when we execute our function modules.
Say a script has 3 interfaces (just an example)
1) In the first command interface, there is a reference to a structure which has 3 nested structures within, in which the inner most 3rd structure is filled.
2) In 2nd interface, the inner most structure in null.
3) In third interface, it is trying to initialize only those elements
that were already initialized and we get a empty node error for the 3rd
nested structure, when it tries to assign the value .
Here is the error message that we encounter
"The Node IT_TABLE_INPUT_DATA[1]-DATA[2]-COMPARE_OPERATOR of Object VS_EDIT_LIST Does Not Exist"*
Please help us in resolving this issue.
Thanks,
Asha
Edited by: Asha Nagaraj on Jan 19, 2009 11:57 AM

Hi,
We tried to parameterize in the node level rather than Struture level, still the same problem persists, becoz
1. In the first command interface the value has been assigned to internal node
2. In the second command interface there is no value to assign, so null value is assigned to that node
3. in the third command interface, when it tries to assign the value to the node which was assigned "null" in the previous interface, we are encountering that issue. it is not able to find that node
Let me know if u need further info.
Thanks,
Asha

My macbook pro says connection lost when I try to connect to my wifi.

I cannot connect to my wifi at home via wireless. It only works if I'm connected via ethernet cable. When I would attempt to connect to my wifi, it says connection lost. Does anybody have a solution? (not sure if this is helpful or not, but is says no network selected)

I cannot connect to my wifi at home via wireless. It only works if I'm connected via ethernet cable. When I would attempt to connect to my wifi, it says connection lost. Does anybody have a solution? (not sure if this is helpful or not, but is says no network selected)

How to avoid Error in SM13 when assign message type ?

Dear experts,
I have a request that when the user assign the a output type in VL02N, program check something if does not reached the requirement cancel output.I realized it but in SM13 I can see there are update termanited.
Do you know how to aviod it ?
Thanks in advance!

Try not setting output type as "4 Send Immdialtely" instead setting as "1 send with periodically schedule job" and processing these output by backgroud job.

PS3 and PSP don't optain IP Adres. Connection lost when downloading.

Hi. I have a WRT54G V.5.1 router with FW: v1.02.0. There was no problem at first. Wireless connection with my PS3 worked great. But since a week or so my PS3 and PSP doesn't optain an IP Adres anymore.
I wired my PS3 to the router and everything works ok.
PSP online does not work. I manually entered an IP Adres in my PSP connection settings. Connection tested and ok. But trying to internet with PSP gives me a DNS-error.
Then the problem with connection. When I download something with my pc or PS3 after a few minutes theres no connection anymore. I have to re-connect within the setup. Bittorrent will crash the router within seconds. I cant't download demo's or movies with PS3 without many disconnects.
From reading all over the net I understand that the V5 or higher seems to have these problems (connection). Is there nothing to solve this problem?
Please help.

Set your PSP and PS3 back to obtaining IP and DNS Settings automatically. Don't manually type especially if you don't have a static IP address from your Internet Service Provider.
I believe your concern is just a matter of wireless connectivity. The most common reason why you are not being able to connect properly on the wireless network is that there may be a new wireless network within your vicinity that may be running of similar or if not, the same wireless settings to that of your Linksys wireless network.
My suggestion is for you to go into the console of your Linksys router and change the wireless channel, change the wireles network name. Make them as unique as possible. Best wireless channels to choose from are Channels 1, 6, 9 and 11. Channel 9 is good only for people in Canada.
Hope this helps.
tui vere,
andré

Wireless Keyboard and Mouse connection lost when computer wakes up

Every time my computer wakes up I get the message "Connection Lost" referring to the mouse (Mighty Mouse) and keyboard. I have to wait a couple of seconds for them to start working. I tried to remove them from the list of Bluetooth devices and then pair them again, but had no success. It's pretty annoying to have this happening everytime the computer wakes up.
Is anybody else experiencing this? Any suggestions?
Thanks.
richard

I have this issue as well, and havn't found a sufficient answer on the forums as of yet.
I can pair my mouse every day, and it will work fine, until I leave it at night when my computer shuts down. When I return in the morning I have no mouse, and have to go back to the bluetooth setup wizard and re-pair the mouse by turning it off then on again. I can't even just come in and turn the mouse off and on and have it work. I have to actually go through the setup wizard.
I CAN however, go to the bluetooth preferences, click on the mouse, and choose "connect" when it is turned off, then turn it on and it will connect without having to re-pair, but this is just as tedious and annoying as the whole setup process.
It's so annoying to have to have a wired mouse plugged in just so I can pair my wireless mouse every morning. Kind of defeats the purpose of a wireless mouse.
When I orginally bought the mouse and keyboard I had to return the original mouse because it wouldn't hold a connection even when I was using it. Obviously these wireless mice of Apple's need some more TLC in the engineering dept.

Connection lost when sending email from iSeries machine w/ JavaMail API?

Hello all,
I have a never-ending process (RPGLE) running on the iSeries machine that frequently needs to send an email. In an attempt to improve performance, I connect to the SMTP server as soon as this process starts. Then, each time an email must be sent, I construct the message and send it. This seems to work, but occasionally (no particular pattern) something goes wrong that causes a javax.mail.MessagingException to be thrown. When this occurs, the process continues to retry the send until it works again... it always ends up working again after 4 minutes or less. However, I'm concerned about the fact that it gets this exception. Any suggestions or ideas would be greatly appreciated. Thanks! Jesse
Here are some code snippits:
~~~The RPGLE process first calls a method to setup the SMTP server and connect:
String hostName = "email.hostname";
String hostType = "email.hosttype";
// Get system properties
Properties systemProperty = System.getProperties();
// Setup mail server
systemProperty.put(hostType, hostName);
systemProperty.put("mail.smtp.connectiontimeout", "30000");
systemProperty.put("mail.smtp.timeout", "30000");
// Get session
session = Session.getDefaultInstance(systemProperty, null);
// Connect to the smtp server.
transport = session.getTransport("smtp");
transport.connect();
~~~ Then, when needed, the RPGLE process continues to call a method to send email. It is in here that the MessagingException is thrown.
if (!transport.isConnected())
transport.connect();
message = new MimeMessage(session);
message.setFrom(new InternetAddress(from));
message.setRecipient(Message.RecipientType.TO, new InternetAddress(to));
message.setSubject(subject);
message.setContent(text,"text/html");
message.setHeader("X-Mailer", "HtmlMail");
message.saveChanges();
transport.sendMessage(message, message.getRecipients (Message.RecipientType.TO));

Thanks for the link. It was helpful. I added code to print the details of the exception to an IFS text file. However, I'm still not able to determine the problem. Any suggestions you can provide will be greatly appreciated. Thanks!
These are the details of the exception:
com.sun.mail.smtp.SMTPSendFailedException: 451 4.3.2 Please try again later
java/lang/Throwable.<init>(Ljava/lang/String;)V+4 (Throwable.java:85)
java/lang/Exception.<init>(Ljava/lang/String;)V+1 (Exception.java:33)
javax/mail/MessagingException.<init>(Ljava/lang/String;Ljava/lang/Exception;)V+2 (MessagingException.java:57)
javax/mail/SendFailedException.<init>(Ljava/lang/String;Ljava/lang/Exception;[Ljavax/mail/Address;[Ljavax/mail/Address;[Ljavax/mail/Address;)V+3 (SendFailedException.java:77)
      com/sun/mail/smtp/SMTPSendFailedException.<init>(Ljava/lang/String;ILjava/lang/String;Ljava/lang/Exception;[Ljavax/mail/Address;[Ljavax/mail/Address;[Ljavax/mail/Address;)V+10 (SMTPSendFailedException.java:46)
      com/sun/mail/smtp/SMTPTransport.issueSendCommand(Ljava/lang/String;I)V+135 (SMTPTransport.java:1333)
      com/sun/mail/smtp/SMTPTransport.mailFrom()V+509 (SMTPTransport.java:906)
      com/sun/mail/smtp/SMTPTransport.sendMessage(Ljavax/mail/Message;[Ljavax/mail/Address;)V+244 (SMTPTransport.java:535)
      JavaMail.sendMail(Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;)S+139 (JavaMail.java:191)

TS3367 FaceTime keeps saying connection lost when attempting to use from iPad to ipad

How do I connect to another iPad user if I keep getting message connection lost

I have same problem with my iphone4. Don't know how to solve it

Internet connection lost when restarting the computer

Hello everyone.
I live in Denmark, and 6 days ago I bought a new TOSHIBA pc: a Sattelite L855D-100. From the very start there has been a problem with the wireless internet connection. When I restart the pc, the internet connection is gone afterwards, and I am not able to re-establish the connection in any possible way. I have to shut down the pc - wait a few seconds - and then start the pc in 'normal' way. Then the wireless internet connection is okay.
But the problem is the same every time I restart the pc.
Does anyone know how to solve this problem?
I thank You in advance for Your help and advice.
Best regards Svend in Copenhagen.

Satellite L855D-100 (PSKAYE-003004DU) <- Netherlands version
A brand new computer should work right off the shelf, Svend.
I would restore the hard disk to its original out-of-the-box contents using Toshiba recovery media just once. And then return it for a new one if things are still not working right.
See the section System Recovery, which begins on p. 4-16 of the User's Manual (attached).
-Jerry
Attachments:
L855UsersManual.pdf ‏5612 KB

OWB 10.1 -- How to make a JOB agains a process flow.

Dear All
I have created mapping and make a process flow. Deploy and generation done successfully.
If i execute my process flow it whole bring data from source table to detination warehouse schema table.
I want this process automate and run it daily at a given time. I do not get any control centre or other utility from OWB wheren I can make a job or schedule to achieve this goal. My OWB version is 10.1.
Regards
Sayeed

Follow the below step to schedule mapping
1.Define the Scheduler
2. Right Click on Schedule tab -> New and define the module say Sche_mod
3.Right Clicvk on Sche_mod ->New
Filll all the details like when to run ther schedule say every sunday
2.Right click the mapping or process flow which ever to schedule
under Configure > Refered Calendar select the schedular name.
3 Deloy the mapping .
4.Deploy the Sechdular then run the scheduler.
then every sunday the mapping/process flow will be executed.
(Mark the answer as helpful or correct if it is)
Cheers
Nawneet

Multiple Schedules of Objects (Process Flows)

Hello,
How can you assign a process flow to two different schedules (and jobs) f.i. a week and a weekend job. Do I need to make some copy of the object as you assign object to a schedule.
Regards,
Edwin

a process flow can only refer to one calendar at a time, for your requirement you will ahve to copy the process flow and refer the weekend calendar to one Pf and weekly calendar to another.
this is precisely the reason why lot of companies use schedulers like autosys or control M as there is a calendar facility which can run the same job at different schedules rather have 2 different process flow and calendars.
You might be better off using "sqlplus_exec_template" which can be found in /owb/rtp/sql folder and using a dbms scheduler to run this process flow in which case you can sue the same process flow but create 2 jobs to run at different times rather than creating 2 process flow and 2 different schedules.
Regards

OWB Error: Connection lost when assign a schedule to a process flow

Similar Messages

Maybe you are looking for