OWB mapping issue

Hi,
I we have an issue with 10gR database and OWB mapping.
When I run the generated SQL of the OWB mapping it hardly takes any time to complete.
But when I run the mapping through OWB client or Run
the process flow which calls the mapping it takes huge amount of time and does'nt complete sometimes.
Please can someone suggest something ?
Regards,
S

Hi ,
Check if that mapping is taking time for auditing purpose only .
If yes then you can consider to pure old audit information from OWB repository .
You can use the script provided by Oracle to purge audit information .
Else read Metalink Note 430755.1 "How To Purge OWB Execution Audit Tables Using The Truncate Command"
Thanks,
Sutirtha

Similar Messages

OWB Performance issue (mapping execution always takes min 60 sec)

Hi All,
any owb mapping we execute in one of our environment , it seems the execution hangs for some time before it build the Attempting to create native operator 'class.RuntimePlatform.0.NativeExecution.PLSQL' statement. The log file shows a constant difference of 30 sec. before executing the <map>.main() function. the data extraction is very low some thing like 10-1000 records
Action taken : increase the SGA pool size to allow more resource. at the DB level
changed the -Xms64M -Xmx256M to -Xms335M -Xmx440M.
But no help
Extraction from the owb log is as follows.
2006/03/15-09:29:09-WST [1E0BF3BF] Initializing execution for auditId= 28339 parentAuditId= null topLevelAuditId=28339 taskName=XXIF_OUT_CSV_TRANS
2006/03/15-09:29:09-WST [1E0BF3BF] Attempting to create adapter 'class.RuntimePlatform.0.NativeExecution'
2006/03/15-09:29:09-WST [1E0BF3BF] Attempting to create native operator 'class.RuntimePlatform.0.NativeExecution.PLSQL'
2006/03/15-09:29:39-WST [1E0D73BF] PLSQL callspec: declare l_env wb_rt_mapaudit.wb_rt_name_values; l_IN_BATCH_ID null........
Kindly note the difference of 30 sec between create native operator to actual execution of PLSQL code.
The same set of mapping is working fine(5-15secs) in our Dev env. but is taking additional time (kind of 1-3 mins ) in Test env. and the execution of mapping does not go in parallel mode(Is this an expected behaviour ?) and if we have 10 seperate excution of the mapping , it takes 30mins to complete in TEST env. compare to 3mins in DEV env.
The noticible difference between these two env. is
These mapping been created using 10.1.0.2.0 client and deployed on 10.1.0.1.0 repository. in DEV env.
but the TEST Env. uses 10.1.0.4.0 repository.
When check the audit browser .. Can see the total elapse time is 61sec but the actual mapping exec time is only 1 sec.
Is there any configuration settings which cause this delay.
Any pointers on this will be of great help.
Regards,
njain

I am having exactly the same issue as you have described here. i.e. my mappings are taking some time to initialize before they run. Did you or anyone find a solution to this problem?

Row movement Disabled at DB- creating problems in OWB mapping

Hi All,
We have a OWB mapping 'XXXXX' with Default operating mode set to 'setbased-failover to rowbased' mode.The generation mode is set to 'Row Based'.This is called in a processFlow 'YYY'
This was running fine until sometime ago.
Recently at the database row movement on tables was disabled.
After this the 'YYYY' fails with a 'Warning:ORA-01403: no data found' when it calls 'XXXXX'.
Any idea on what this means.Is it something to do with the row movement disablin done recently?
Is the default operating mode and generation mode combination selected by us valid.
Please provide any inputs /queries by which we can trace the exact problem.
Many Thanks!!
BRgds
Sridha

I don't think that issue will be with OWB.
take generated code and run in directly in database and check are you getting the same error.
Cheers
Nawneet

Problem in running OWB maps

Hi ,
We use DBMS to kick our OWB maps.Previously it worked very fine ..But from near about 2 weeks we are facing problems.
Problem is though our JOB_QUEUE_PROCESS is set to 8 and even I can see 8 jobs with this_data populated in dba_jobs (means jobs are running as we cannot query DBA_JOBS_RUNNING view to see the no of jobs running as it is taking too much time ) we can see only entry of two of there maps in WB_RT_AUDIT.other maps start only if these two get complete .
and there is huge time difference between actual job start time and the entry into WB_RT_AUDIT table .
can any one help us with solution.
Bcos of this issues load which used to take max 4 hours is now taking 24 hours..
Thanks & Regards

I've successfully installed OWF as described in Installation guide (all components are on the sam server).
But when I deploy a workflow in OWB I get some errors. In the job details
I find ORA-00942 and RPE-02053. It seems that the workflow repository is missing.
Are there additional steps for creating a workflow repository?
Or what is wrong? All installation logs (wf.log and workflow.log) are without errors and with success messages.
Any idea?

OWB map with DBMS_JOBS.SUBMIT

We use DBMS_JOB package to kick our OWB maps.Previously it worked very fine ..But from near about 2 weeks we are facing problems.
Problem is though our JOB_QUEUE_PROCESS is set to 8 and even I can see 8 jobs with this_data populated in dba_jobs (means jobs are running as we cannot query DBA_JOBS_RUNNING view to see the no of jobs running as it is taking too much time ) we can see only entry of two of there maps in WB_RT_AUDIT.other maps start only if these two get complete .
and there is huge time difference between actual job start time and the entry into WB_RT_AUDIT table .
can any one help us with solution.
Bcos of this issues load which used to take max 4 hours is now taking 24 hours..
Thanks & Regards

Please any to help this situation..

XSLT mapping issue in parent child relation

Hi Guys,
i have one XSLT mapping issue. Mapping scenario is from IDoc to file.
IDoc structure is as below
<ZLOIPRO1>
<E1AFKOL>
 <A></A>
 
 <E1RESBL>
 <MATNR>1</MATNR>
 <CHARG>1</CHARG>
 <ZSBL>
 <MTART>ABC</MTART>
 </ZSB>
 </E1RESBL>
 <E1RESBL>
 <MATNR>2</MATNR>
 <CHARG>2</CHARG>
 <ZSBL>
 <MTART>ZHA1</MTART>
 </ZSB>
 </E1RESBL>
 <E1RESBL>
 <MATNR>3</MATNR>
 <CHARG>3</CHARG>
 <ZSBL>
 <MTART>ZHA1</MTART>
 </ZSB>
 </E1RESBL>
</E1AFKOL>
</ZLOIPRO1>
As you can see 'E1RESBL' is repeatative. Now my issue is i need to select 'MATNR' and 'CHARG' from 'E1RESBL' segment when first occurance of 'ZSBL/MTART' with value 'ZHA1' appears. i.e. my output would be MATNR = 2 and CHARG = 2.
I hope i am clear. Please let me know if any solution for this.

Hi,
Try this
<xsl:if test="./ZSBL/MTART == 'ZHA1'">
<xsl:for-each select="./E1RESBL">
<MATNR>
 <xsl:value-of select="./MATNR"/>
</MATNR>
<BATCH>
 <xsl:value-of select="./CHARG"/>
</BATCH>
</xsl:for-each>
</xsl:if>
You might need to do some changes in the above.
Thanks,
Prakash

EA4500 – Smart Wi-Fi interface and Windows Network Map issues

I purchased this Router about 2 weeks ago as a phased upgrade of our Home Network, primarily to enhance media streaming. It has the latest firmware preinstalled from the factory. Prior to the purchase and installation of the EA4500 Router I replaced my old Motorola SurfBoard SB6120 DOCSIS 3.0 Cable Modem with a Motorola SurfBoard SB6141 DOCSIS 3.0 Cable Modem. My old Linksys E2000 Router worked perfectly with the SB6141, with the exception that the E2000 wasn’t IPv6 enabled, but does have 10/100/1000Base-T Ethernet (RJ-45) and Internet ports.
The EA4500 has been installed for about 10 days and seems to have improved local network speeds and I don’t seem to be having any Internet connectivity issues. However, there are some disturbing issues with the EA4500 and the AE3000 I purchased. There are 11 devices connected through the Router; a Dell Desktop (wireless with the AE3000), a Dell Desktop (Ethernet), a Dell Laptop (wireless), 2 Canon Printers (1 Ethernet and 1 Wireless), 2 Western Digital 1TB MyBookLive Network Drives (both Ethernet), a WD TV Live Streaming Media Player (wireless), an Apple TV media player (wireless), an iPad (wireless), and an Android Smartphone (wireless).
Issue 1 – The Linksys Smart Wi-Fi interface appears to be unreliable at times!!! I’ve read about this problem here on the Community involving the EA6500, so I don’t know if this is a Linksys Server issue, as suggested in a few responses, or a bug in the Router firmware, or defective hardware. However, when the interface locks up, it can’t be accessed from a wireless or wired connection. Usually, powering down the Router and then powering it back up and restart will allow it to function again. However, at times before the interface completely locks up it shows either just a white screen or the security screen will show no firewall features enabled. This is a little scary, so I’ll do a complete reset and setup; this is becoming a pain in the rear!!!!! Is there any hope for this being fixed, in this Router, not the next generation??????????
Issue 2 - All of my network devices show up in the Router’s Device List. Except for the Apple devices they also show up, when they are online, in Windows 7 Explorer under Network and when you click on Network they are correctly displayed as Computers, Media Devices, Network Infrastructure, or Storage. However, when you click on “Open Network and Sharing Center” and then click on “See Full Map”; it fails with the response “Windows cannot create the network map. Responses from other devices on the network are delayed or there is an incompatible router on the network”; no device map is shown. When I follow the link for more information, the only thing that stands out is “A device on the network, such as a hub or switch, is not working properly or is not compatible with the Link Layer Topology Discovery (LLTD) protocol, which Windows uses to create the map. To fix this problem, disable the device, turn it off, or remove it from your network”. All of my network devices showed up on the Network Map with the old E2000. This issue is the same on all of my computers, either wired or wireless. Any known solutions for this, or is it as Windows suggests; an incompatible Router????
Thanks in advance for any insight or solutions. With the issues I’m having with the EA4500 and the AE3000; they are both probably going back to Amazon.

thebluemamba_24; Thank you for your suggestion; I finally found time yesterday to perform an extensive evaluation before I return the Router. However, rather than trying to add devices manually, my rationale was if the EA4500 can’t process them correctly, automatically, it needs to be returned anyway, so I added devices normally letting the device an Router handle the process.
In thinking through this issue, all devices on our network are detected and identified by Windows Explorer on Windows 7 computers; except of course the Apple and Android devices (Apple TV, iPad, and Smartphone). So, I wondered if one of those three devices being added to the Router’s device list was somehow causing issues or interfering with Windows 7’s ability to generate a Network Map. Therefore, my approach was to turn off or disable all devices on our network, reset the Router to factory defaults, reestablish the Router to my custom Home Network configuration using a Windows 7 PC that has LAN and Wireless access to the Router, then add one device at a time and check with each addition to see if Windows 7 could still generate a Network Map.
With the Router reset and reestablishment complete; I began the process of adding one device at a time and checking to see if a Network Map was being generated. What I discovered was when a recent addition to the network, a Western Digital WD TV Live Streaming Media Player, was connected (wirelessly), Windows 7 could no longer generate the Network Map and the failure was consistent. The only way to get the Network Map to work again was to remove power from the WD TV Live, although it remained in the EA4500’s Device List; simply turning it off didn’t help. Since I’d originally witnessed the Windows 7 Network Map working with the Linksys E2000 Router that the EA4500 replaced, I decided to test the WD TV Live with that Router. It worked initially, but it failed consistently after the first success. Interestingly, the failure indication was a little different, but nevertheless generation of the Network Map failed.
I’ve tried changing a few settings on the EA4500 as well as the WD TV Live, but nothing helped. There was a recent firmware update to the WD TV Live, so I might try rolling back the firmware to see if it makes a difference.
The Network Map issue might very well be an issue with the WD TV Live, not the Router, but after reading many threads on this Community I have reservations that the problems I’m experiencing with the Smart interface lockup will be fixed. I suspect new emerging replacement products will be the focus and these older products will be abandoned and no more firmware fixes will be forthcoming and I don’t want to spend more money for a new product just to fix old problems and get something that works properly. The Network Map issue is troublesome, but the lockup of the Router’s “Linksys Smart Wi-Fi” interface is a serious matter to me. It appears that once it locks up, the only way to correct it is a power off restart; not practical if you’re traveling and trying to access settings remotely; the selling point for this feature.
Given the problems I’m experiencing with the EA4500 and AE3000, I guess I’ll return them. Too bad, because otherwise the EA4500 seems like it’s a good Router. I’ve been brand loyal since the Linksys WRT54G came out, but after reading this Community and with my personal experience with the EA4500 and AE3000, now I’ll probably give the NETGEAR N900 equivalents a try.

Credit memo and MAP issue

Hello Guru's
I have 2 issues, and i am unable to understand the system logic for the same
Issue 1:-
We have an Intercomapny scenario
sequence of transaction is as follows
1. Create Return purchase order (document type NB) - Intercompany purchase
2. Post return goods receipts - movement type 161
3. Post credit memo with respect to return purchase order
4. Cancel the movement type 161 - using 161 movement type
System allows me to cancel the document created using 161 movement type
Step 4 should not be allowed but system is allowing me to do so, please advise how to stop this
Issue 2:-
I have a strange MAP issues which is flactuating very drastically
the scenario is as follows
Store stock is 10 ea, stock value is 1000, MAP is 100
DC map is 25
When we make return STO from store to DC, ths stocks are issued at DC MAP (condition type P101)
Assume we issue 9 quantity from Store then
Store stock is 9 ea, stock value is (1000-(25*9)) = 775, MAP is 775/1 = 775
This transaction is causing major flactuation in store MAP (100 changed to 775)
Please advise if there is any way we can control this behaviour
I understand that there is a setting which will in case of major MAP changes will put the amount into PRD account.
Appreciate if you can guide me to help
Regards
Amit

Hi,
For your first scenario,
for a retun po of IC NB type, after creating the PO you need to deliver the same at VL10G. For the delivery system will allow to create the PGR . Prior to these steps you need to return the goods using 161 at MIGO.Please check this 161 stock posted to stock in transit.After PGR system will clear the stock in transit.
Now after claring the stock from transit try cancelling the MIGO 161 document.
For the second query,
Please review your question' When we make return STO from store to DC, ths stocks are issued at DC MAP (condition type P101)
Assume we issue 9 quantity from Store then
Store stock is 9 ea, stock value is (1000-(25*9)) = 775, MAP is 775/1 = 775
This transaction is causing major flactuation in store MAP (100 changed to 775),
Please review the third line.
Regards,

Mapping issue in idoc to JDBC scenario

mapping issue in idoc to JDBC scenario
source structure
E1KNB1M
BUKRS = 1000
E1KNB1M
BUKRS= 9000
E1KNB1M
BUKRS= 2000
THE NODE E1KNB1M is repeated many times and the field BUKRS is also repeated with E1KNB1M as above
TARGET field : ISFRANCHISE
if any where value of BUKRS =9000 we have to pass Y to the target filed, else N
if BUKRS = 9000   THEN ISFRANCHISE= Y
               ELSE
            ISFRANCHISE=N
I've done the mapping as below
BUKRS = 9000--> IF THEN Y ELSE N--
> ISFRANCHISE
BUT everry time the target value is N only
pl suggest
rgds
mojib

mapped like this
BUKRS--->SORT---->
                                             EQUALS --------IF---THEN    Y
9000------------------------>                                               ----------------->ISFRANCHISE
                                                              ELSE   N
context of BUKRS set to parent node
its worked
thanks to all for valuable suggestions
rgds
mojib

Problem in OWB map for source change capture

The problem is as follows:-
Our OWB map between two different databases, captures change in data at source and populates them in target. It is a one to one map. The map is failing to process some rows from source database though it gives no:of errors as 0 in the audit view thus we infer that the map is running successfully.
In our case, we have a composite key ( Instance_id, Version_number) at source as well as target. One instance_id can has more than one version number. We have observed that the view is picking up all the version_number for a particular instance_id but the map is unable to populate the last version_number to the target table.
But when this map was executed in another environment and it is successfully populating all the data in the target.
The brief description of the map is as follows:-
The map has a view which captures all the changes in data (insert and update) .From this view we filter the rows which were already processed in previous map run (with help of watermark). Then we sort the rows based on DML type and watermark . These rows are then mapped to a target table. The loading type of the map is INSERT/UPDATE.

Hi Nagesh,
When we are doing I18N for that Application. Go to Navigator Tab
Here Select Particular Projects--à src-àPackages-àsap-àvijay
To internationalize the Web Dynpro application, copy the automatically generated *.xlf files and save them under a new name in the same directory.
The new name must meet the following convention:
u2022 .xlf
For example, if you are creating *.xlf files for German,
Use the language key de.
Here Click on OK
After that we can edit and translate these new *.xlf files in the S2X Editor.
ApplyTemFirstView.wdview_de.xlf-àClick on Resource Text Tab
Select Particular Text and Change the language to German-àClick on EDIT Button
Here Enter German Lang-àClick on OK
Now Go to Web Dynpro Explorer Tab
Select Project-àRC Click on Rebuild Project
Select Project-àRC Click on Reload
Then Deploye the Application
How to Check in Explorer. It is converting to German Language or not
Open Internet Explorer
Tool-àInternet Options -àClick on Languages Button-àClick on ADD Button
Select German Language--àClick on OK
Now We will Check in Portal
Created Web Dynpro iView in Portal. That iView assign to the particular WorkSet-àAssign to Role
Select that user Can Change Language
Regards
Vijay Kalluri

Case statement in OWB mapping

I am trying to use a case statement in an OWB mapping. I am attempting to use it in expression builder within a filter object. Each time I try to validate the expression in the expression builder I get an error:
Line 4, Col 6:
PL/SQL: ORA-00920: invalid relational operator
Below is the code used in the expression builder window:
CASE A.ATTRIBUTE_NAME
WHEN 'CA COMPLETION DATE' THEN RTRIM(A.C_CODE_VALUE)
ELSE NULL
END
Any help with what is happening would be appreciated.
Thank you.
Matt

Thank you both for you help. I initially tried to use the expression operator but was confused since the expression builder in the expression operator has the drop down list with the available SQL clauses greyed out. In the OWB documentation it states that the drop down will contain SQL clauses that are appropriate for that expression type so when I saw it was greyed out I assumed that those clauses where not valid for this operator. Sure enough though when I pasted in my Case statement it verified correctly.
Thanks again,
Matt

OWB - OEM issue?

OWB - OEM issue?
We are using OWB repository 10.2.0.1.0 and OWB client 10.2.0.1.31 (Win XP). The Oracle version is 10 G (10.2.0.3.0). OWB is installed on Linux.
I find OEM (10.2.0.0.0 with oracle database ver 10.2.0.0.0) part of OWB program folder. As I start OEM, I creted the database connection in OEM explorer. I tried to loggin to created database connection.
I got “ORA-12541: TNS:no listener” error.
It was working all day in OWB/Sqlplus before starting OEM. I noticed OEM changed my tnsnames.ora file in OWbhome\network\admin directory using timestamp.
I came out of OEM session. All my logins via OWB/SQLpus/SQL developer results in “ORA-12541: TNS:no listener” error.
I checked via tnsping on command window, which results in “ORA-12541: TNS:no listener” error.
I restored my tnsnames.ora from backup, all are working except OEM.
Did anyone use OEM with OWB?
Any idea, what is going on ?
Thanks in advance.
RI

Hi,
over the connection goes not only the sql statements for connecting, also much auditing and logging informations goes from one machine to the other. So development and database should be as near as possible for better speed.
Perhaps working direct on the server will increase the speed?
Regards,
Detlef

Mapping issue - if value matches on of several conditions

Hi champs,
I have a mapping in PI 7.1 of an invoice-xml to a INVOIC02-idoc.
I am mapping the invoice sums to E1EDS01-segments and just want to map five of several qualifiers. So I have set up a mapping for the qualifier field SUMID that just maps those five qualifiers, and map the SUMME-field from inbound message as it is.
Now it shows that our vendors send more than those five qualifiers I have in my mapping. Since I don´t have any control of the SUMME-field all seven values get mapped into the Idoc (generating seven E1EDS01-segments), but only the five segments with my mapped SUMID get the SUMID-field. So I get in total seven E1EDS01 segments in which I get only the SUMME in two of them.
So my question is: Are there any pretty ways to handle this kind of mapping issues besides using a lot of equalS, if and or?
I would like to be able to say (in as simple a function as possible) that if qualifier in field A is X, Y or Z then map the value in field B to SUMME. How do I do that? BTW I am not a java-programmer so advanced java-codes are not a good way for me to handle it.
regards,
Glenn

Write an UDF with this code:
public void <UDFNAME>(String <FieldName>,Container container){
If (<FieldName> == "X" || <FieldName> == "Y" || <FieldName> == "Z"){
return <FieldName>;
Edited by: spantaleoni on Mar 16, 2011 4:04 PM

Mapping issue with context again

I again need help with a mapping issue. I dont know how to handle the contexts to get this working in the xi graphical mapping tool. I have previously logged a question regarding this structure but the requirements have now changed.
I have a source document that has multiple delivery line items and for each delivery line item, there are multiple handling units. Each handling unit contains the line number of the delivery line item it belongs to. This structure has been simplified below.
Source Sample
<DOCUMENT>
<DELIVERY_LINEITEM>
<LINENUMBER>10</LINENUMBER>
<MATERIAL>mat 1</MATERIAL>
</DELIVERY_LINEITEM >
<DELIVERY_LINEITEM >
<LINENUMBER>20</LINENUMBER>
<MATERIAL>mat 2</MATERIAL>
</DELIVERY_LINEITEM >
<HANDLING_UNITS>
<HU_LABEL>123</HU_LABEL>
<HU_ITEM>
<LINENUMBER>10</LINENUMBER>
</HU_ITEM>
</HANDLING_UNITS>
<HANDLING_UNITS>
<HU_LABEL>456</HU_LABEL>
<HU_ITEM>
<LINENUMBER>10</LINENUMBER>
</HU_ITEM>
</HANDLING_UNITS>
<HANDLING_UNITS>
<HU_LABEL>789</HU_LABEL>
<HU_ITEM>
<LINENUMBER>20</LINENUMBER>
</HU_ITEM>
</HANDLING_UNITS>
</DOCUMENT>
Source Structure
DOCUMENT 1..1
DELIVERY_LINEITEM 1..unbounded
LINENUMBER 1..1
MATERIAL 1..1
HANDLING_UNITS 1..unbounded
HU_LABEL 1..1
HU_ITEM 1..1
LINENUMBER 1..1
In the target structure, I need to output each handling unit along with the corresponding DELIVERY_LINEITEM material. Target structure has been simplified below:
Target Sample
<DOCUMENT>
<ROW>
<PACKAGING>
<HU_LABEL>123</HU_LABEL>
</PACKAGING>
<PACKAGING_ITEM>
<LINENUMBER>10</LINENUMBER>
<MATERIAL>mat 1</MATERIAL>
</PACKAGING_ITEM>
</ROW>
<ROW>
<PACKAGING>
<HU_LABEL>456</HU_LABEL>
</PACKAGING>
<PACKAGING_ITEM>
<LINENUMBER>10</LINENUMBER>
<MATERIAL>mat 1</MATERIAL>
</PACKAGING_ITEM>
</ROW>
<ROW>
<PACKAGING>
<HU_LABEL>789</HU_LABEL>
</PACKAGING>
<PACKAGING_ITEM>
<LINENUMBER>20</LINENUMBER>
<MATERIAL>mat 2</MATERIAL>
</PACKAGING_ITEM>
</ROW>
</DOCUMENT>
Target Structure
DOCUMENT 1..1
ROW 1..unbounded
PACKAGING 1...1
HU_LABEL 1..1
PACKAGING_ITEM 1..1
LINENUMBER 1..1
MATERIAL 1..1
Note, 1 ROW in the target structure = 1 HANDLING_UNITS from the source structure.
Can anyone help me to achieve this? I do not know how to map the relevant DELIVERY_LINEITEM\MATERIAL from the source structure to the target structure.

JM,
Please find the solution. Reply back if it helps or not
http://www.flickr.com/photo_zoom.gne?id=1045178998&size=o
http://www.flickr.com/photo_zoom.gne?id=1045179010&size=o
http://www.flickr.com/photo_zoom.gne?id=1045179022&size=o
Results :http://www.flickr.com/photo_zoom.gne?id=1045179134&size=o
Code used:
for(int j=0;j<Handling_Linenum.length;j++)
for(int k=0;k<Delivery_Linenum.length;k++)
if(Handling_Linenum[j].equals(Delivery_Linenum[k]))
result.addValue(""Material[k]"");
result.addContextChange();
Best regards,
raj.

Array of Parameters in OWB mapping

How do i pass an array of parameters to an OWB mapping.

Try this and similarly you can get all operator.
OMBRETRIEVE MAPPING 'MAP_NAME' GET TABLE OPERATORS
OMBRETRIEVE MAPPING 'MAP_NAME' GET VIEW OPERATORS
OMBRETRIEVE MAPPING 'MAP_NAME' GET TRANSFORMATION OPERATORS
OMBRETRIEVE MAPPING 'MAP_NAME' GET TABLE_FUNCTION OPERATORS
Cheers
Nawneet
Edited by: Nawneet_Aswal on Aug 30, 2010 8:43 AM

OWB mapping issue

Similar Messages

Maybe you are looking for