OWB table import problem

I am a new user in OWB working with OWB 10.1.0.3.
I´m importing a table from our target schema but i only get the table name and not the columns into OWB.
There is no problem when importing from the source schema.
Anyone having a solution ?
Regards
Preben

Laura, did you get this problem solved? I had the same exact situation yesterday and it still is there. How did you get it fixed?
Thanks, Ray
[email protected]

Similar Messages

Error while importing text file to Power Pivot via Table Import Wizard

Hello there,
I'm a rookie at handling Excel to be honest. I've been trying to import a .txt file to Excel (it contains around 14 million rows of information) but Excel won't let me since it can only handle around 1 million rows per sheet (too troublesome to do such thing
14 times in 14 different sheets). Then I googled that Power Pivot let me handle around 100 million rows in a Pivot.
I'm trying to import this .txt file to Power Pivot by doing the following:
Home tab > From Text > File Path (insert .txt location here) > Finish
After that it shows the Table Import Wizard retrieving the rows from the .txt file. Problem is... at the end of the import (once it hits row 14,000,000 or so) it shows an error. It states the following:
"Memory error: Allocation failure : Not enough storage is available to process this command. .
The current operation was cancelled because another operation in the transaction failed."
Please note that the size of the .txt file is 900 MB.
Another thing is that, when I select the .txt file from its location at the File Path section, the "preview" field only shows 50 rows, not all of them. Is that okay to happen?
Is it because the size of the .txt file is too big?
Please let me know if you need more info in regards to this.
Thanks in advance.

Hi AdiUser,
Only showing 50 rows for the preview is normal behaviour. Based on what you've described, it sounds like Power Pivot is running out of memory when you are loading this .txt file. Are you running the 32 bit or 64 bit version of Excel. Also, if you are running
the 64 bit version how much RAM is available?
If you're running the 32 bit version then the available RAM for Power Pivot is less than 1 GB even if the system has more than this installed. You can address this by installing the 64 bit version. If you're running the 64 bit version then it may be
that you don't have enough RAM to accommodate this amount of data and you may consider upgrading the RAM. Alternatively, you could try and reduce the size of the table in memory by using the preview screen to remove any columns that are not of use. This
is especially important if there are any column with a high number of unique values that aren't actually needed in the model. In addition to removing columns altogether, you could try filtering the data so that only a subset of the rows are imported.
This can also be done from the preview screen.
Regards,
Michael Amadi
Please use the 'Mark as answer' link to mark a post that answers your question. If you find a reply helpful, please remember to vote it as helpful :)
Website: http://www.nimblelearn.com
Blog: http://www.nimblelearn.com/blog
Twitter: @nimblelearn

Error while table Import from Oracle (OBIEE server 64bit & Client 32bit)

Hi All,
Problem : ODBC/OCI Connectivity Issue between OBIEE 11.1.1.6.2 BP1 (64-bit) server and OBIEE 11.1.1.6.2 BP1 Client (32-bit) local machine.
We have an OBIEE 11.1.1.6.2 BP1(64-bit) setup on a 64-bit ‘Windows Server 2008 R2 Enterprise’ machine.
OBIEE dev team members have 32-bit local machines.
OBIEE “Admin team member” (who will work on RPD) has OBIEE 11g client (BP1) installed on their *32-bit local machine*(which is common client software for 32/64 bit.)
Now, two ODBC connections were created on this 32-bit local Client machine, with OBIEE 11g client installed on it.
One with “BI server driver” for connection to OBIEE server machine(64-bit) to open RPD and other with “Oracle database driver” to connect to the Oracle database on 64-bit machine, to import tables.
With this setup done, I am able to open the RPD in online mode and view the existing sampleapp related objects present in it.
But when I try to import metadata from OBIEE client admin tool using OCI or ODBC, it gives an error that “Connection fails! “
I have the required tns entry in my tnsnames.ora file and I am able to connect to this database from the local client machine, using sqlplus.
Kindly let me know if there are any restrictions in using this type of a setup combination of 32-bit and 64-bit machines for OBIEE 11.1.1.6.2 BP1 setup.
If not then, what steps are to be followed to do the setup btw 64-bit OBIEE server and 32-bit OBIEE client to make table import working.

Hi Veeravalli.. Thanks for your response.
I have my tns file residing in both the location you mentioned on the server machine. (64-bit)
•     {Oracle_BI1}\network\admin directory
•     {oracle_common}\network\admin directory
And also in the below Oracle_home path of oracle_client in the local machine. (32-bit, Oracle 11g R2 database client)
•     {oracle_Home}\product\11.2.0\client_1\network\admin
Also, I have used the full expanded tnsnames as you mentioned. Still issue persists.
When I use , “DataDirect 6.0 ODBC Oracle Wire Protocol” driver, for creating the system DSN and try to import tables from OBIEE client admin tool on local client machine, the connection happens and table list comes up, but it’s an SAP product and hence it throws a msg to purchase the tool to go further with table import.
I am wondering if I any other configuration steps need to be carried out, with the ODBC/OCI set up between 64-bit OBIEE server and 32-bit OBIEE client.
Also, the source database that I am trying to connect to is yet again on a 64-bit machine(Oracle 11g R2).
Please suggest.

Table Import Data - "Insert script" - National characters

Hi all,
it looks like that there is a problem with support of national characters in imported data file when method "Insert script" is chosen.
Table -> Import Data -> Open datafile "csv".
As far as in the preview window I'm seeing properly displayed national characters from csv data file and when I'm choosing "Insert" or "SQL Loader" method - data is properly imported to the table.
But when I'm using "Insert script" method, in generated script national characters are changed into "bushes":
http://imm.io/V0J9
SQL Developer: Version 3.2.20.09
OS: Windows XP SP3
Client code page: WIN-1250
Tested databases: 10g, 11g

<p>This has been fixed in the latest build. The patch is now available for <a href = "http://www.oracle.com/technology/software/products/sql/index.html">download</a>.
</p>
Regards
</p>Sue

Import problem with DMP file

Hi all
I am using oracle 9i and I have problem in import problem.........
when i try to import the DMP file it gives me the error,
IMP-000200: long column Too larege for column buffer size <22>
can any body please tell me how to get out of this error....
actually I have a table in export file that has round about 2 lac rows....
The problem occurs on that table.
Any help will be highly appreciated
Thanks in advance
Regards
Shayan
[email protected]

The correct error code is IMP-00020 not 200
What's your current buffer set to when imp?
IMP-00020: long column too large for column buffer size (number)
Cause: The column buffer is too small. This usually occurs when importing LONG data.
Action: Increase the insert buffer size 10,000 bytes at a time (for example). Use this step-by-step approach because a buffer size that is too large may cause a similar problem.
As adviced, increase 10000 and try again.

LR3.2 import problem on computer with Windows OS

LR3.2 import problem on Windows OS
This is a continuation of a question that I posed on August 22, 2010 in the discussion string "Cannot import CR2". I have not been able to resolve the issue of importing an image into an existing folder location. I had not been able to work on this issue for a number of weeks due to other circumstances, until today.   Note that the following people had attempted to provide answers and suggestions already: ssprengel, JayS In CT.
I use a laptop with a Windows operating system and a Macintosh desktop with Snow Leopard. I run Lightroom on both of them. The Windows laptop has Windows Vista Home service pack 2, version 6.0 [6002]. Around August 12th I upgraded from Lightroom 2 [481478], to Lightroom 3 on the laptop. I left the LR2 on the laptop as well as LR3. On September 12th I upgraded the laptop to LR3.2. No other changes have been to the laptop or its software applications that I know of.
My current attempts at resolving the issue reveal that when I created a new catalog "Test Catalog" in LR3 and saved that catalog to my desktop new folder labeled "Test Catalog" that I can import an image into LR3.2 to a new folder on the laptop's desktop. I then deleted the images via LR3.2 Folders Remove function and tried to import the images into an existing folder as presented in the LR3.2 Import dialog, but get the error message "The following files were not imported because they could not be read.".   When I import images into a new folder placed on the desktop, I can use all functions in LR3 e.g. Develop module. I cannot import images into existing folders on the laptop's hard drive - I have tried importing into the entire existing folders in the following hierarchy: c:\users\Michael\My Documents\My Pictures\2010 but always get the same error message.
LR3.2 does correctly backups upon exiting each time I quit the program, so I know that there isn't any issue of writing to that backup folder which is contained in an upper folder that contains the lightroom catalogs. I have even created a new Word file, saved it into the folder with Lightroom catalogs, opened it up, modified it, saved it, and saw that it works OK, so that tells me there is no problem with a Read-Only folder attribute.
I cannot recall if upon the upgrade from LR2.6 to LR3 that I chose to upgrade the catalog to LR3 version. Would that matter, if yes, what do I verify, how do I manual upgrade the catalog.
History of actions between August 10th that I have taken follows between the [[[[ and ]]]]:
[[[[Preference settings for Default Catalog are set to start with a specific catalog that I call "Lightroom master catalog", it is not set to the "Load most recent catalog".
All of the following were using my laptop: Previously I had no problem with LR2 for any functions. I just purchased an Epson 7000 media storage device, and in early August and practiced importing images into LR2, and those images were pulled in OK. Next, I upgraded to LR3. I discovered that the Epson's images had been placed into a wrong folder when I opened LR3. I used the remapping function in LR3 to move the images into the correct folder. Next, I used a SanDisk card reader to import images into LR3 into an existing folder of images, but the following error message appeared "the following files were not imported because they could not be read" (Import Results said 'some import operations were not performed'). I tried importing a single image, and multiple images, but had the same error. I tried switching the card reader to each of 4 different USB port on the laptop, with the same error occurring on each USB port used.
In order to try to isolate the problem. I took the SanDisk card reader with the memory card and successfully imported the images into LR3 on my Macintosh desktop computer; so to me the problem is not the card reader or the memory card. I also used the SanDisk recovery disk while using my laptop to look at the files on the memory card and I could see all the images correctly while in the recovery program, but I have not copied the images to the laptop's hard disk, and have not tried an import into the laptop's LR3. I did not import images directly from my camera to the laptop LR3 since I did not think it would help with the troubleshooting.
I then ran the Repair from the Adobe LR3 CD upgrade disk, on my laptop. Then I tried doing the import using the SanDisk reader and memory card, but the same problem occurred and same error message, that the files could not be imported (I was trying to import into a folder of existing images). I then used the Laptop's Control Panel function to remove LR3 application. Then I did a fresh upgrade of LR3 on my laptop, but the same error message and I am unable to do any import of the memory card from the card reader. I then tried to do an image import from the Epson 7000 into the laptop, and the same error message and I am unable to do any import into a folder with existing images.   I then tried doing an image import into LR2 on the laptop, and got the same problem to occur when trying to import into an existing folder of images. I have a couple of Canon EOS SLR digital cameras, and the issue occurs for any of the file types of the cameras.
Went into LR3 Preferences, General Tab, I now checked the previously unchecked box for Import Options - "Show import dialog when a memory card is detected".
Connected the Canon XTi directly with a cable to the laptop computer. Note that Canon's information said that Picture Transfer Protocol is automatically used when the XTi is directly connected to a computer, so I did not need to change anything in the camera's menu for communications choices (there is no communication menu in fact). I selected one image and copied it to the laptop desktop. Tried to import it into LR3 into a folder of existing images but got the error message "Could not copy a file to the requested location." While in LR3, I changed the location of where the file would be copied into - any of my existing folders of images; tried 5 different folders, but kept getting the same error message.
With the card reader connected via USB port on the laptop, I copied one image file to the desktop, and then tried importing into LR3 into a folder of existing images. Got the error message "Could not copy a file to the requested location."]]]]

I am not clear if by 'import' you are trying to copy or move the files from a location to another or if you are adding the files to a catalog. My comments may not, therefore, be too helpful.
Firstly, with both LR2 and LR3 installed you will have both catalogs present, but if you try to open the LR2 catalog with LR3 you will be prompted to update the catalog. You will thus know which catalog you are working on.
Secondly, if you are reading direct from the camera, you should connect using the 'PC connection' mode.
Thirdly, there is an issue with reading .CR2 files directly from the early Canon DSLRs (in Europe named 300D, 350D, 400D). While they are visible with the Canon software, they can not be seen with Windows explorer nor can they be accessed with Lightroom.
I suggest that you take the CF card out of the camera and copy the files using Windows Explorer in to the destination folder. You are then sure that the files are on the PC.
If you have the right Codec installed, you can view them with Windows photo gallery; if you don't, you can use one of the Canon software packages to view the files. You are then sure that the files are not corrupted.
Then import the files to your LR catalog using the normal import routine selecting 'add without moving'. I have tried this routine successfully using my 350D using both LR1.x and LR3.x. If that doesn't work - I'm lost.
Frank

On windows 8 and itunes I have importing problems the DVD is only reading the music cd from 1.5x to 4.0x for 95% of the time, it does hit speeds of 30x for the other 5% of the time. Is it a driver issue with the DVD or is it a windows 8 issue?

on windows 8 and itunes I have importing problems the DVD is only reading the music cd from 1.5x to 4.0x for 95% of the time, it does hit speeds of 30x for the other 5% of the time. Is it a driver issue with the DVD or is it a windows 8 issue?

No. You have no alternative but to plug it into a computer running iTunes and restore it.

Aperture Video Import Problem - from Lumix GH4: Imported clips have their dates changed to the import date. The files show up on the hard drive but many are not showing up in Aperture.

Aperture Video Import Problem - from Lumix GH4: Imported clips have their dates changed to the import date. The files show up on the hard drive with import date not created date, but many of these same files are not showing up in Aperture. Sometimes the clips actually show up with the current import but take on the video information from a previously imported file.

It was suggested I move this question to IPhoto or IMovie which I did.
Well moving to a different discussion group did not provide an answer to this question either. But what I finally did was import one batch of photos and videos into IPhoto for a given day at a time. Working with these I could change the date and times in order to get them in the original sequench taken. Then I would create an album with that batch. These would all be on the same day (IMove was closed for this phase). Then I would open IMovie, generate the thumbnails for that album, and select the album I had created. This was necessary because the importing process in IPhoto was using incorrect dates for my video so it was a real struggle finding them in IMove until I developed this approach.
I believe that this whole process was so screwy because I was importing from an external hard drive not a camera. I had these photos on a PC and did not have the original cameras to use to import directly which I am fairly sure would have made this easier!

Final Cut Pro/GY-HD111E import problems?

Final Cut Pro/GY-HD111E import problems?
With a brand new Mac Pro and very latest Final Cut Studio complete with updates I'm having a little problem trying to import footage directly from a JVC GY-HD111E (yes I'm in PAL land, UK) via FireWire into FCP.
Footage is 720p/25p and timeline is set up in FCP that way.
I'm doing a 'capture now'. The first clip I'm trying to import is about 45 minutes long with no cuts/breaks whatsoever.
What happens is after about 60 seconds or so, it FCP automatically breaks the clip for no reason and starts a new one, trouble is, when it does this I lose about 4 seconds of footage at that point.
It continues to break clips randomly, sometimes after 40 seconds or so, sometimes after 95 seconds, but usually between 30 seconds and 2 minutes and each time it starts a new clip I lose between 1 and 6 seconds.
As I say, there are zero breaks or cuts in this clip, I have a 45 minute clip that was shot in one take, not even a pause anywhere.
Is this a JVC issue or a Final Cut issue?
It's a pain as it simply means I can't import my 9 hours of footage hence I can't get on with this project.
Any ideas why this phenomenon is happening?
Thanks guys.

I mean I get the same errors.
Let me explain again.
There are NO start/stop/pauses in this clip.
I'm trying to import just ONE clip with no breaks, again, there are NO start/stop/pause, it is one continuous clip of 15 minutes duration.
The JVC creates some sort of errors at the Firewire output stage, it drops frames or other errors, FCP gets confused and creates a new clip, even though it is the same clip, but due to the GoP structure, it looses a few seconds too hence I can't import the footage as I keep loosing bits here and there mid clip. It is randam, every 30 to 100 seconds or so it will do this.

Annoyed with JVC/Final Cut Pro import problem; will they ever fix this?

Annoyed with Final Cut Pro JVC import problem; will they ever fix this?
I've shot footage on JVC GY-HD111E in the UK in 720p/25p PAL mode.
I'm trying to import lots of short clips (average 10 seconds) into Final Cut Pro (latest version with 720p/25p support) with a new Mac Pro maxed out with ram and 3 extra internal HDs.
Problem is, on a scene-break i.e. pause/stop, Final Cut detects this and creates a new clip, but it takes about 5 seconds to 'searching for media" before it starts the new clip. Because some clips are only very short, this 5 second delay sometimes means I only get the final few frames of a clip, rather than the entire 5 seconds or so of it.
JVC UK are blaming Apple and are saying it is up to them to fix it as Premiere and Edius does not have this problem.
However, Symbiosis in the UK (who do HD-Connect box) say that the JVC ProHD cameras do not wrap the shots up properly at the end, they are kind of left open and this creates problems on scene-breaks.
I've tried turning off the "create new clip on timecode break" etc, but it does not make any difference, when I do this it simply quits capturing on a scene break. Besides I have about 300 cutaways like this and I don't want to spend the rest of the year breaking them up on the timeline as this would be a futile and long workflow.
I'm importing and working on a native HDV 720p/25p timeline and this is the way I want to work. I've already imported and edited 4 hours of footage, but these 4 hours were easy as all 4 tapes had no start/stop points, they were recorded continuously from beginning to end of tape for 64 minutes each time so importing was no problem; 1 clip per tape.
But now I've come to my 5 tapes containing hundreds of cutaways I'm kind of screwed and need some advise on how I can import them natively in HDV without losing this 5 seconds off the beginning of each clip whilst FCP searches for the media each time.
I've been told this issue is definately with FCP, any ideas how I can get around this?

I haven't heard of this JVC/FCP problem, so I can't comment on it. However, whoever shot the cutaways didn't do you, the editor, any favors.
I've been doing video since 1984, and I've got to say, anyone who shoots a scene that is only 5 or 6 seconds long on tape is making a huge mistake, and it's been that way since the beginning of computerized editing in the late 70s.
Shoot at least 5 seconds of pre-roll before the shot begins, then roll tape for at least 5 seconds after you've got the shot. That's the protocol I've followed for 22 years now. Tape is cheap, edit suite time isn't.
But laying down only 5 to 6 seconds for a scene is wrong, IMO.

Base Table for problem code in Cs_incidents_all_b

hi
in cs_incidents_all_b we have problem_code. the does not contain any data ... we have any tl table for problem code i have cssr_prob_code_mapping_detail but if i query this
SELECT dra.repair_number,
items.description item_desc,
prob.problem_code,
fndl.meaning flow_status_name,
inc.summary,
nvl(cp.instance_number,'Not availble') ib_instance_number
FROM csd_repairs dra,
csd_repair_types_tl drtt,
cs_incidents_all_b sr,
csi_item_instances cp,
fnd_lookups fndl,
csd_flow_statuses_b fsb,
mtl_system_items_kfv items,
mtl_units_of_measure_tl uom,
jtf_rs_resource_extns_tl rstl,
jtf_rs_groups_tl rgtl,
fnd_lookups plkup,
cs_incidents_all_tl inc,
cs_sr_prob_code_mapping_detail prob,
cs_incident_types_b ty
WHERE dra.repair_type_id       = drtt.repair_type_id
AND drtt.language              = userenv('LANG')
AND dra.repair_mode            = 'WIP'
AND dra.incident_id            = sr.incident_id
AND dra.CUSTOMER_PRODUCT_ID    = cp.INSTANCE_ID (+)
AND dra.flow_status_id         = fsb.flow_status_id
AND fsb.flow_status_code       = fndl.lookup_code
AND fndl.lookup_type           = 'CSD_REPAIR_FLOW_STATUS'
AND dra.inventory_item_id      = items.inventory_item_id
AND dra.unit_of_measure        = uom.uom_code
AND uom.language               = userenv('LANG')
AND dra.resource_id            = rstl.resource_id (+)
AND rstl.category (+)          = 'EMPLOYEE'
AND rstl.language (+)          = userenv('LANG')
AND dra.owning_organization_id = rgtl.group_id (+)
AND rgtl.language (+)          = userenv('LANG')
AND dra.ro_priority_code       = plkup.lookup_code(+)
AND plkup.lookup_type(+)       = 'CSD_RO_PRIORITY'
AND items.organization_id      = cs_std.get_item_valdn_orgzn_id
AND inc.incident_id            =dra.incident_id
and ty.incident_type_id=sr.incident_type_id
and prob.incident_type_id=ty.incident_type_id
AND fndl.meaning in('Open')
order by dra.repair_numbereach diffrent problem codes for same repair number here i am want records relevant to Depot Repair

In 11.5.9, the problem and resolution codes are stored in FND_LOOKUP_VALUES table with lookup type as 'REQUEST_PROBLEM_CODE' and 'REQUEST_RESOLUTION_CODE'. I'm hoping you could still use these tables to find problem codes, even if you were on 11.5.10 or R12.
Join would be something like:
WHERE fnd_lookup_values.lookup_type = 'REQUEST_PROBLEM_CODE'
AND fnd_lookup_values.problem_code = cs_incidents_all_b.problem_code
Regarding restricting the query for Depot Repair service requests, you need to restrict by the the incident_type_id for this type of SRs (like id for Depot incident type is 10003 for us).
HTH
Alka

Table update problem in tabstrip control

Hi experts.
i have one tabstrip control having 4 tabs.
in those tabs i am updating one table say ztable(database table).
my problem is this is happening in pai of every tab.
but what ever i am updateing table those changes will reflect in other tabs.
where i have to write code like pbo or what i should do.
what ever i am updateing in tab1 i have to see in tab2.what ever i have update i should see in tab3.
but it is not showing the updates when we will go for other tabs.
Thanks

Hi,
Please check the following things :
1 . The Fucntion code type for each tab is blank
2 . Same subscreen area is assigned to each tab
3 . Corresponding subscreen is dynamically incorporated into the subscreen area CALL SUBSCREEN in the flow logic
If you are not doing this, then you are scolling in SAP GUI, not in your program. In this case the values entered in TAB1 won't get reflected in TAB2.
If this is the case in your program, fix the above three points. then it will work.

Imovie Mac importing problem or Camcorder problem?

I run a small business for kids parties. I video the kids dancing along to a track they have recorded (played on a cd player). Then i import the video, turn off the camcorder sound and import the finished mixed track of their singing and sync the picture and audio together. This has been working perfectly for over a year. But unfortunately in the last month when i try to sync up the audio track with the video, it starts off synced up perfectly, but gradually as the video goes on the video and audio become out of sync and by the end the video is either too fast or too slow. this is a huge problem! I thought it may the tapes in the video camera so i changed them and it's still doing it. Is this a video camera problem or computer importing problem. Can anyone help as it's ruining the kids DVDs!

I am surprised it has ever worked. That can normally only be done with synched professional equipment. Maybe they changed the CD player at the performance and the old one happened to play at the same rate as your Mac when it imports? (There is a slight difference between the playback speed between different players)
Or perhaps your video camera has become slightly worn, so it pulls the tape slower?
There are endless possibilities for problems with your setup.
I think you should take a look at the "add scaled" tip at the bottom here:
http://danslagle.dvmix.com/mac/iMovie/audio/1001.shtml
(Instead of adding the extracted audio from iMovie, you should add the CD audio.)

Lightroom 5.4 Canon partial import problem (CR2s)

Hello,
I have Lightroom 5.4 on a Windows 8.1 system x64. My camera is a Canon 50D that's several years old.( i.e. not a brand new camera import problem)
When I plug my camera into my computer via the USB cable and try to import images into a Lightroom catalog, Lightroom will recognize and import jpgs, but it does not even see CR2 files. No errors, no thumbnails. It's like they are not there. If I capture a single image as both a jpg and CR2 simultaneously it will only see the jpg and not the CR2.
If I open the Canon EOS Utility it sees any and all images (CR2's included).
I've read a few posts so to help narrow it down:
1) I have write access to the folder (b/c I can import the jpgs.).
2) My Windows system does not recognize the CR2 files in an exporer window if they are still on the camera (to be specific, it sees that there are files, just not the type and no thumbnail. Not even a properties option with right click). I can't pull the files directly off the camera with my computer only with the Canon app. I have the latest camera codec pack put out by Microsoft KB2899190 from 12/9/2013.
3) Once the CR2's are on my computer via the Canon EOS app they are viewable in Expolorer (thumbnails) and can be imported into Lightroom.
4) I have cleared and reformatted the flash card (more than once). Rebooted and powered down the PC and Camera multiple times (removed camera batt. and Unplugged PC).
5) As of time of this post Lightroom is up to date.
I believe there is some communication issue with my camera and this particular PC setup. My wife's computer does not have this issue (she has Vista). When she plugs in the camera the thumbnails pop up in an explorer window for her right away.
Thoughts?
Thank you very much for your help.

Yes, for many people. Recent versions of Lightroom in particular seem to be quite fickle when trying to import directly from camera, and the "fix" in virtually all cases is to use a card reader.

SQL+-MULTI TABLE QUERY PROBLEM

HAI ALL,
ANY SUGGESTION PLEASE?
SUB: SQL+-MULTI TABLE QUERY PROBLEM
SQL+ QUERY GIVEN:
SELECT PATIENT_NUM, PATIENT_NAME, HMTLY_TEST_NAME, HMTLY_RBC_VALUE,
HMTLY_RBC_NORMAL_VALUE, DLC_TEST_NAME, DLC_POLYMORPHS_VALUE,
DLC_POLYMORPHS_NORMAL_VALUE FROM PATIENTS_MASTER1, HAEMATOLOGY1,
DIFFERENTIAL_LEUCOCYTE_COUNT1
WHERE PATIENT_NUM = HMTLY_PATIENT_NUM AND PATIENT_NUM = DLC_PATIENT_NUM AND PATIENT_NUM
= &PATIENT_NUM;
RESULT GOT:
&PATIENT_NUM =1
no rows selected
&PATIENT_NUM=2
no rows selected
&PATIENT_NUM=3
PATIENT_NUM 3
PATIENT_NAME KKKK
HMTLY_TEST_NAME HAEMATOLOGY
HMTLY_RBC_VALUE 4
HMTLY_RBC_NORMAL 4.6-6.0
DLC_TEST_NAME DIFFERENTIAL LEUCOCYTE COUNT
DLC_POLYMORPHS_VALUE     60
DLC_POLYMORPHS_NORMAL_VALUE     40-65
ACTUAL WILL BE:
&PATIENT_NUM=1
PATIENT_NUM 1
PATIENT_NAME BBBB
HMTLY_TEST_NAME HAEMATOLOGY
HMTLY_RBC_VALUE 5
HMTLY_RBC_NORMAL 4.6-6.0
&PATIENT_NUM=2
PATIENT_NUM 2
PATIENT_NAME GGGG
DLC_TEST_NAME DIFFERENTIAL LEUCOCYTE COUNT
DLC_POLYMORPHS_VALUE     42
DLC_POLYMORPHS_NORMAL_VALUE     40-65
&PATIENT_NUM=3
PATIENT_NUM 3
PATIENT_NAME KKKK
HMTLY_TEST_NAME HAEMATOLOGY
HMTLY_RBC_VALUE 4
HMTLY_RBC_NORMAL 4.6-6.0
DLC_TEST_NAME DIFFERENTIAL LEUCOCYTE COUNT
DLC_POLYMORPHS_VALUE     60
DLC_POLYMORPHS_NORMAL_VALUE     40-65
4 TABLES FOR CLINICAL LAB FOR INPUT DATA AND GET REPORT ONLY FOR TESTS MADE FOR PARTICULAR
PATIENT.
TABLE1:PATIENTS_MASTER1
COLUMNS:PATIENT_NUM, PATIENT_NAME,
VALUES:
PATIENT_NUM
1
2
3
4
PATIENT_NAME
BBBB
GGGG
KKKK
PPPP
TABLE2:TESTS_MASTER1
COLUMNS:TEST_NUM, TEST_NAME
VALUES:
TEST_NUM
1
2
TEST_NAME
HAEMATOLOGY
DIFFERENTIAL LEUCOCYTE COUNT
TABLE3:HAEMATOLOGY1
COLUMNS:
HMTLY_NUM,HMTLY_PATIENT_NUM,HMTLY_TEST_NAME,HMTLY_RBC_VALUE,HMTLY_RBC_NORMAL_VALUE
VALUES:
HMTLY_NUM
1
2
HMTLY_PATIENT_NUM
1
3
MTLY_TEST_NAME
HAEMATOLOGY
HAEMATOLOGY
HMTLY_RBC_VALUE
5
4
HMTLY_RBC_NORMAL_VALUE
4.6-6.0
4.6-6.0
TABLE4:DIFFERENTIAL_LEUCOCYTE_COUNT1
COLUMNS:DLC_NUM,DLC_PATIENT_NUM,DLC_TEST_NAME,DLC_POLYMORPHS_VALUE,DLC_POLYMORPHS_
NORMAL_VALUE,
VALUES:
DLC_NUM
1
2
DLC_PATIENT_NUM
2
3
DLC_TEST_NAME
DIFFERENTIAL LEUCOCYTE COUNT
DIFFERENTIAL LEUCOCYTE COUNT
DLC_POLYMORPHS_VALUE
42
60
DLC_POLYMORPHS_NORMAL_VALUE
40-65
40-65
THANKS
RCS
E-MAIL:[email protected]
--------

I think you want an OUTER JOIN
SELECT PATIENT_NUM, PATIENT_NAME, HMTLY_TEST_NAME, HMTLY_RBC_VALUE,
HMTLY_RBC_NORMAL_VALUE, DLC_TEST_NAME, DLC_POLYMORPHS_VALUE,
DLC_POLYMORPHS_NORMAL_VALUE
FROM PATIENTS_MASTER1, HAEMATOLOGY1, DIFFERENTIAL_LEUCOCYTE_COUNT1
WHERE PATIENT_NUM = HMTLY_PATIENT_NUM (+)
AND PATIENT_NUM = DLC_PATIENT_NUM (+)
AND PATIENT_NUM = &PATIENT_NUM;Edited by: shoblock on Nov 5, 2008 12:17 PM
outer join marks became stupid emoticons or something. attempting to fix

OWB table import problem

Similar Messages

Maybe you are looking for