OWB with oracle express?

hello,
is it possible to install OWB with the underlying Oracle Database 10g Express Edition?
is this supported?
thanks in advance
-sven.

Hi,
with 10g XE you have no support from oracle:
Requirements OWB 10gR2:
The database can be any of the following versions:
- Oracle9i Release 2 (9.2.x) Enterprise Edition
- Oracle Database 10g Enterprise Edition R1 (10.1.x)
- Oracle Database 10g Standard Edition R2 (10.2.x)
- Oracle Database 10g Enterprise Edition R2 (10.2.x)
But I think it would work with the owb. But not good, because of some missing functions like parallel DML, bitmapped index, ....
See all of the restrictions in this document:
http://www.oracle.com/technology/products/database/oracle10g/pdf/twp_general_10gdb_product_family.pdf
Regards,
Detlef

Similar Messages

Creating a new database with oracle express

how to create a database with oracle express. the web based interface for managing oracle sucks and it is too slow, they'd bet better of developing a rich client application for managing XE. Oracle XE comapraed to SQL Express is very poor.

Try to post it Oracle Database Express Edition (XE)<br>
<br>
Nicolas.

Apex 3.2 with oracle express

Hi
Can i use Apex 3.2 with Oracle Express edition Oracle XE without paying any money and without violating liscence agreement ?
regards
Hrishy

Yes, there's no licensing issue with this. Oracle encourages this upgrade in order that applications can take advantage of 3.x enhancements.
Information on differences between XE with APEX 2.2 and 3.2, and upgrade instructions.

Connect Toad freeware with Oracle express Edition, How?

Hello,
Although I know that people will raise the question this is Oracle and use SQL developer... Ok I do that and that is working fine. But on my work they work with TOAD so I like to work with TOAD as well and I want get some knowledge about Toad, TNSNAMES etc.
I've put the issue on TOAD forum as well, but till now I don't have received an answer.
I want to teach/learn myself Oracle by working with the Oracle express edition. I have downloaded the SQL Developer and I can work with it, which means I can create a connection.
Errors when I try to work with TOAD are:
If i try to make a connection:
- "No valid clients found. You need at least one 64-bit client properly configured"
If I click on TNSNames editor:
- Access violation in address xxxxxxx at module TOAD.exe"
I have installed oracle at D:\ORACLE_HOME. In this directory is also a TNSNAMES.ORA file.
I have installed the express edition with the installer. I have first installed the Oracle express edition and later TOAD.
I'm working on my local machine with:
- windows 7 Home
- Oracle 32 bit client:
- Oracle Database 11g Express Edition Release 11.2.0.2.0 - Production
- PL/SQL Release 11.2.0.2.0 - Production
- "CORE 11.2.0.2.0 Production"
- TNS for 32-bit Windows: Version 11.2.0.2.0 - Production
- NLSRTL Version 11.2.0.2.0 - Production
- TOAD 64-bit freeware.
*Questions:*
*- Are there certain environment variables necessary? Does TOAD expect Oracle at a certain directory?*
*- Is it necessary to add something to the PATH environment variable?*
*- 32-bit Oracle client will working with the 64-bit TOAD freeware?*
Nico

Nico van de Kamp wrote:
I've put the issue on TOAD forum as well, but till now I don't have received an answer.Yes, correct, visit toadworld.com. This is not the proper forum.
>
Errors when I try to work with TOAD are:What version toad? Is it 11.6 x64?
If i try to make a connection:
- "No valid clients found. You need at least one 64-bit client properly configured"Listen to that message. A 64-bit program requires 64-bit libraries.
I have installed the express edition with the installer. I have first installed the Oracle express edition and later TOAD.
I'm working on my local machine with:
- windows 7 HomeHome editions are not supported, sorry.
- Oracle 32 bit client:What is it - Client or Server?
- Oracle Database 11g Express Edition Release 11.2.0.2.0 - Production>
- TOAD 64-bit freeware.Perhaps easiest way out is to remove 64-bit Toad and install the 32-bit one instead.
>
Questions:
- Are there certain environment variables necessary? Does TOAD expect Oracle at a certain directory?
- Is it necessary to add something to the PATH environment variable?
- 32-bit Oracle client will working with the 64-bit TOAD freeware?
All these should be directed elsewhere, e.g. at some Toad forum, maybe at toadworld.com.

OFA Connectivity with Oracle Express Server

Hi All,
I have installed and Configure Oracle Express Server 6.3.4, it is running fine, I am able to view the dimensions and members, but I am not able to connect it with Oracle Financial Analyzer. Please inform me how to establish connection between Oracle Express Server and Oracle Financial Analyzer.

but I am not able to connect it with Oracle Financial Analyzer. What is the error?
Please inform me how to establish connection between Oracle Express Server and Oracle Financial Analyzer.Please see these docs.
Oracle Financial Analyzer Top Issues (v6.x) [ID 227199.1]
Oracle Financial Analyzer 6.x Frequently Asked Questions (FAQ's) [ID 203229.1]
Oracle Financial Analyzer Technical Notes Index [ID 132065.1]
There are No Financial Analyzer User Names Associated With the Given User ID [ID 237317.1]
Thanks,
Hussein

How to install Oracle Spacial with Oracle Express Edition 10g?

Hello,
I'm new in Oracle Technology, I just wanted to try Oracle Spatial.
I don't know how to get it so I've installed Oracle Express and followed this tutorial :
http://oracledbas.blogspot.com/2009/06/manual-installation-of-spatial-10g.html
They say Jserver, Oracle interMedia and Oracle XML Database have to be installed, but only one of them seems to be set up (XML DB), I can't install the others.
If someone can help me to install Oracle Spatial, it would be nice. Bye.

If you want to use Oracle Express Edition, note that the 11.2 version is available on beta now:
http://www.oracle.com/technetwork/database/express-edition/overview/index.html
Its a while since I've used XE but from what I recall you get the Locator functionality, but not Spatial. That makes sense as XE is free, which Spatial needs to be licensed.
However, you can do an awful lot with Locator. To see if it is setup, just check if you have the MDSYS schema. Then describe the SDO_GEOMETRY type:
describe mdsys.sdo_geometry
If they are both there, then you're in business.

Is it possible to use Oracle Memebership Providers with Oracle Express

I am using Oracle Express as development database and I was able to create the ORA_ASPNET_ tables and procedures but when I try to use Microsofts "ASP .NET Configuration" tool to create users and roles I get this error message: OracleConnection.ConnectionString is invalid
When I use the connection string in code to connect to the database I am successful, I am able to open and close a connection to the Oracle Express database.
This is the connection string I am using: <add name="OraAspNetConString2" connectionString="DATA SOURCE=localhost:1521/XE;ENLIST=false;METADATA POOLING=False;PASSWORD=CREDENTIALSMGR;PERSIST SECURITY INFO=True;STATEMENT CACHE PURGE=True;USER ID=CREDENTIALSMGR;" providerName="Oracle.DataAccess.Client"/>
So I am wondering why when I run the application and the membership class tries to verify the user I get the error message: OracleConnection.ConnectionString is invalid
I have been looking at this a couple of days now so not sure what the problem is, any help?

I suggest that update your machine.config file under your
C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\CONFIG.
There is one following entry. You may try to update the
connectionString with a valid string value.
<add name="OraAspNetConString" connectionString=" " />

Installing ODAC Entity Framework with oracle express

Hi, I need to develop a .net web app with oracle back end. To setup development env. for oracle I downloaded oracle database express edition 11g 2. and installed it succesfully. after I tried to install this ODAC it throws me a error
"Remove all the spaces from the chosen ORACLE_HOME" help me out to resolve this,
Can I use SQL Developer to connect to Oracle Express. Kindly help me out asap.

Hello,
This is by designed in Entity Framework, the view is not designed to be editable by default. If you persist in editing a view, you need to create an editable view, for details, please check this blog:
How to create an updateable view with ADO Entity Framework and with LINQ to SQL
This blog is based on the SQL Server database, however, I notice that you are working with the Oracle database, I am not sure if the Oracle database provider for Entity Framework supports the editable view, I
suggest you could confirm this on the Oracle database forum:
https://community.oracle.com/welcome
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Where to locate HTTP Server for use with Oracle Express 10g and Apex?

Hello,
Im a newbie and I downloaded oracle express 10g and Apex 3.2.1. The Apex install is referencing "choosing a HTTP Server" specifically "Oracle HTTP Server and mod_plsql and the embedded PL/SQL Gateway". My question is do the HTTP server or PL SQL embedded Gateway come with the 10g install or do I need to download them seperately? If so where can I locate them?
Thank you!

user12027813 wrote:
If using Oracle XE, then which APEX install scenario would I used if I downloaded both the XE and apex from the OTN?Oracle XE includes APEX 2.1 and uses the PL/SQL Gateway for HTTP service work. No separate HTTP Server is required.
If, after you install XE, you want to upgrade to APEX 3.x, you would select the PL/SQL Gateway for the upgrade.
If the PL/SQL Gateway (EPG) does not provide the full set of services you need, you could put a regular Apache in front and redirect to APEX for those specific issues.
If that is to complicated, then you could license Oracle Application Server Standard Edition 1 (for a fee) to get an Oracle HTTP Server and it's mod_plsql to replace the internal EPG.

Is DBAT Connector compatible with Oracle Express Edition

Hi All,
This is the first time that I would be working with DBAT connector.
I would need to start POC on DBAT Connector 11.1.1.5.0 with oracle DB.
As part of POC, I would like to know, whether I would need to install Oracle EE (10g or 11g or 12g) or Oracle Express edition of the same version would suffice.
This is just to reduce Oracle EE license issues for POC.
Would you kindly suggest.
Thanks in Advance.

Please refer the certification table of DBAT connector:
https://docs.oracle.com/cd/E22999_01/doc.111/e20277.pdf
Note: The Express edition of any of the above version will work.
~J

Problem with Oracle Express Administrator

Hi everybody,
I want to ask about Oracle Express Administrator,
Please tell me why variable I define in Relational Access always be function in my express? the data always 0.00 too ? I use table Oracle in this
And why always make three database ? after the batch manager ?
Please I'm new with Express Administrator.
Best Regards,
Djohan Wahyudi

This is the way every Express object that is modelled gets implemented at the physical level. Each object has a physical storage object, which is a variable that is usually dimensioned by a composite to manage storage sparsity. This physical object is difficult for users to understand as the dimensionality is not based on the presentation format the user will want. Hence, a logical object (a formula) is used to breakout the variable into the base dimensions making it easier for users to interact with from the perspective of creating queries. There is more information in the user guides on this subject.
I would recommend upgrading to 10g Release 2 rather than using Express. The latest release of the database contained an OLAP multi-dimensional engine within the core database. There is no separate engine like there is with Express and the administration and management tools are much easier. Please refer to the OLAP wbsite on OTN for more information:
http://www.oracle.com/technology/products/bi/olap/index.html
Hope this helps

How to use unixODBC with Oracle Express on Ubuntu 8.10?

I downloaded Oracle Express a couple of days ago, so I am totally new to Oracle.
I tried connecting via unixODBC, using dsn=oracledsn, user=dba, password=abcd and received error info:
1: st=01000, nerr=0, msg=
[unixODBC][Driver Manager]Can't open lib '/usr/lib/oracle/xe/app/oracle/product/10.2.0/server/lib/libsqora.so.10.1' : file not found
but the shared 'so' library actually does exist at the path above. I also set
ODBCINI=/etc/odbc.ini;export ODBCINI and immediately checked it was in the environment.
The .ini files are:
/etc/odbcinst.ini
[OracleExpressdrv]
Driver = /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/lib/libsqora.so.10.1
Description = Oracle 10g express driver
/etc/odbc.ini
[ODBC Data Sources]
oracledsn = Oracle Express DSN
[oracledsn]
Driver = OracleExpressdrv
Note: The dsn and the driver names are enclosed within square brackets but came out as web links above in the preview.
After many hours of googling I have not been able to find how to connect via ODBC to a local (on my PC) Oracle Express.
Advice would be most welcome.

hello
I have the same problem. My system is Fedora 11
I set the odbcinst.ini and odbc.ini files as you mentioned. I also set the LD_LIBRARY_PATH :
$ echo $LD_LIBRARY_PATH
/usr/lib/oracle/xe/app/oracle/product/10.2.0/server/lib/
when I try to connect using isql, I get that error:
[01000][unixODBC][Driver Manager]Can't open lib '/usr/lib/oracle/xe/app/oracle/product/10.2.0/server/lib/libsqora.so.10.1' : file not found
[ISQL]ERROR: Could not SQLConnect
I couldn't figure out what I am missing.
May someone help please?

Using OBIEE with Oracle Express Edition Database? SOLVED

I have a client that wants a quick demo of OBIEE. They sent us some csv files as the data source. I migrated them to Excel files for easier use, but the Excel files seem to have limitations on how I can combine the columns, such as concatenating and formatting.
I then loaded them into an Oracle Express Edition database, assuming more "database" functionality would be available to me. I was able to load them into the Administration Tool, but Answers gives me the following error when I try to view any results from the Express database:
Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 17001] Oracle Error code: 12154, message: ORA-12154: TNS:could not resolve the connect identifier specified at OCI call OCIServerAttach. [nQSError: 17014] Could not connect to Oracle database. (HY000)
SQL Issued: SELECT COURSE_ENROLLMENT.CAMPUS saw_0 FROM BI_DEMO ORDER BY saw_0
Thanks for any help. This is my first non-guided attempt using OBIEE.
Edited by: markstuartnelson on Sep 29, 2008 5:22 PM

Thanks. I got some assistance from a co-worker that is also using Express Edition. (This is also my first use of Express Edition.)
Here is the tnsnames entry that I created, in case it helps someone else:
DEMO_XE =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = xe)
)

Graph & Table on Web With Oracle Express

Hi,
I generated table & Graph both on same page using
oracle Express Analyzer.I am unable to export both table & Graph
to web. I want to know how to see the table & Graph both on the
same page in web.
I wouid appreciate any help.
Regards
Gopi

I guess another way of doing this is to create an html file
which can be accessed by the web server.containing the following
code....
-Create an express view (Table) using Web agent code
-Then store the datacube of this view in a variable
-Create another express view (Graph)
-Assign this variable to the new express view
hope this helps....Lemme know if require more information...

Inconsistence with oracle express and toad

I created two accounts(A and B) under system account under oracle express, then under system, A and B account, I created one table for each account (USER_TABLE) . I can see all three tables from oracle express. But I can't see the tables from toad. Even I can't see A andB schema from toad. Anyone knows what's the problem.
Thanks,
-- Allen --

I think I access to the correct db since there is only one db instance. Only system has the DBA privilege, A and B just regular account. The accounts I created from oracle express should reflect to toad, I can't see them, but I can see HR schema from toad.
Thanks,
-- Yu Hu --

OWB with oracle express?

Similar Messages

Maybe you are looking for