OWB10gR2 : One Repository and Multiple Enviroments(Dev , QA and Prod)

Hi All,
In 10gR1 , Runtime repository and Design repository used to be 2 different schemas. Because of this , we can simply have one repository in development and deploy the mappings into QA and Prod.
In R2 , runtime and design objects are present in a single repository. Do we need to install separate repository for each of the environments(Dev, QA and Prod) or is there a way to manage multiple envs without multiple repositories?
Thanks in Advance
Mallee

Hello Malle,
We are in a similar situation so our setub looks something like this.
We have a database which serves the purpose of design repository. Let's call it owbdev.
We have three target databases (data warehouse). Let's call them whdev, whqa, whprd.
In the db owbdev we configured an owb user (as owner of the repository) and various other users (as developers).
In whdev, whqa and whprd we did the same configuration except this time, we called the repository owner in each of these target databases, owbrun. This will be what we call in R2 our control center.
Then we deploy from owbdev to any of the three targets after having setup the appropriate locations and control center configurations in owbdev.
If there is a better way to do things I'm open to any and all suggestions.
Mike

Similar Messages

  • Multiple Client Systems and Multiple Repositories

    Hello,
    The client I am working on is insisting that we create two repositories and connect one repository to an R/3 system, and one to an ECC system.
    Can this be done?! I keep insisting that this is against the basic principle of MDM to have 'one single version of the truth' and that having different data in different repositories is not true MDM.
    Can this even be done? Or can it be done if each repositories hold the same data?

    Hi Nichole,
    I agree with Shiv that this totally depends on your business requirement. You can have two repositories if there is business requirement, only need to be taken care of Sizing. As you are keeping the same data in two repositories rather than one so as per performance you should take care of required memory, hard disk size etc.
    e.g. There are scenarios where sometimes as per business requirement you have to create different repositories as per region. Like one for Europe, other for US etc.
    Regards,
    Mandeep Saini

  • How do I apply color correction from one clip to multiple clips?

    Hey Everyone,
    I coming to find out that I'd like to apply the color correction from one clip to multiple without clicking, dragging, and punching in every setting clip by clip. Does anyone know how? This would be a total time saver! Thanks in advance.
    Mike Diaz

    Grizzly,
    You are too awesome! Thank you so much my friend.
    Mike Diaz

  • One Oracle Application Server and multiple OC4J Instances

    While we are getting new server (for development) we have to set-up a Development and Production enviroment for our project (dont have previous OAS installation) but on the same machine.
    So, is a good option to have One OAS INstallation (Ora Home) and then create multiple OC4J instances, one for each environment (Development, QA and Production)?, is it possible? How to manage deployments between OC4J instances, simulating different contexts if they are in the same server and under the same HTTP Server? Will be there conflicts?

    Hi,
    you can do this and OracleAs will manage the different instances. The deployment can be done with Enterprise Manager in which case you select the OC4J instance first before deploying. If deploying from JDeveloper, you can specify the OC4J instance when creating the named connection
    Frank

  • Can I create and use more than one repository on OVM 2.1.5

    The version of Oracle VM I am using is 2.1.5 .
    I wonder can I create and use more than one repository on OVM 2.1.5. Because I want to install different GOS on different disks.
    I know in Oracle VM 2.2 we can use following commands to realize that.
    a. #/opt/ovs-agent-2.3/utils/repos.py –n /dev/mapper/mpathxp1
    b. #/opt/ovs-agent-2.3/utils/repos.py –r UUID
    c. #/opt/ovs-agent-2.3/utils/repos.py –i
    And other repositories can also be mounted and found under /var/ovs/mount/UUID.
    But in Oracle VM 2.1.5, seems just one repository can be created and mounted. For example:
    At first, I create a repository using mpath1p1:
    a. # mkfs.ocfs2 /dev/mapper/mpath1p1
    b. #/usr/lib/ovs/ovs-makerepo /dev/mapper/mpath1p1 C "cluster root"
    c. I can find the repository has been mounted under /OVS.
    But if I want to use "/usr/lib/ovs/ovs-makerepo /dev/mapper/mpath2p1 C "cluster root" to create another repository, and check the mount status using command "mount", these two disks are all have been mounted under /OVS.
    "# cat /etc/ovs/repositories", only mpath1p1 with UUID was recorded there.
    After reboot, only repository with mpath1p1 was mounted under OVS.
    Can anyone tell me how to use more than one repositories on OVM 2.1.5. Do I have to install all the GOSs on the same disk and repository.
    Thank you very much.

    Now I've known how to create different repository. They will be mounted under /OVS/UUID. Thanks.

  • I have one apple ID and multiple family members share this with their devices.  How do we keep pics and messages separate?

    I have one apple ID and multiple family members share this with their individual devices.  How do we keep pics and messages separate for each device?

    For messages
    MacMost Now 653: Setting Up Multiple iOS Devices For Messages and FaceTime
    For other issue:
    How to use multiple iPods, iPads, or iPhones with one computer
    What is the best way to manage multiple...: Apple Support Communities

  • Can I use one itunes account for multiple users and multiple devices

    Can I use one itunes account for multiple users and multiple devices?

    The iTunes EULA, as I understand it (I'm not an attorney )for Apps is basically that one person can use an App multiple devices, or multiple people can use an App one device..so one to many or many to one, but not many to many....

  • How to bundle a .FLA and multiple .SWF files in one .EXE?

    Hi,
    I have a .FLA file which uses loadMovieNum() to load various
    .SWF files when each one is called by the user clicking on a
    button. Each .SWF file also uses loadMovieNum() to call a second
    .SWF file. When I publish the .FLA file as a .SWF file it all works
    beautifully.
    Now I need to package the entire project into a Windows
    projector .EXE file for offline use on a computer without the Flash
    Player. When I publish the main .FLA file as a .EXE file, the .SWF
    files still load, although they blink before fully loading and
    displaying steadily.
    What I would really like to do is to bundle all the .SWF
    files into the .EXE file so when I send the finished project to the
    end user, they only have to deal with one file, rather than a
    folder with the .EXE file and multiple .SWF files.
    Is there a way to do this?
    I am using Flash 8 Professional.
    Thanks,
    Cam

    Since this isn't going to be web-based, why not include all
    the external swf files into the same Flash file and then use
    attachMovie?
    This will allow you to create one .exe file that would
    contain EVERYTHING. Since you aren't worried about loading speeds,
    you don't have to load the movie clips, but can simply create one
    large Flash file.

  • I have 3 i phones.  Can I have multiple accounts on one computer where it keeps the contacta and calendar for each?

    I have 3 i phones.  Can I have multiple accounts on one computer where it keeps the contacta and calendar for each?

    My daughter and I both have iphones. I created an account (not separate itunes) for her on my computer so she could sync her phone/itunes but not have it interfere with mine since we have WAY different taste in music. Creating a different computer profile should work if you have separate itunes accounts, too.
    If you all use the same itunes account, you can turn on Home Sharing. That way you can all download the same content without having to pay for it again. Not sure how or if that works with separate itunes accounts.
    Hope that helps!

  • HT1495 Multiple logons for one computer and multiple devices trying to use one itunes account.

    I have one computer with a logon for Kids and one for Adults.  There is a touch and nano that was added to a single itunes account tied to my email on the adult logon and the shuffle that is on the kids account.  I can't seem to get the multiple devices access to all the songs with out erase and re-sync error message when not using the right device on the assigned logon to the computer - why and can we change this?

    It sounds like each Windows user has it's own iTunesLibrary.itl file.  If that is the case, then you are correct, the correct device must be connected when logged in with the correct login.
    If all Windows logins share an iTunesLibrary.itl file... then it does not matter which login is used or which device is connected.

  • One premium account and multiple Skype HD devices

    Will one Premium account and multiple non premium HD accounts work for video calling? Basically the idea is 10 HD skype devices, the set top boxes connected to tvs will dial into one Premium Mac or PC account for multiple video conferencing.

    Yes, one user needs to have a Group Video Calling subscription.
    Unfortunately, not all devices support Group Video calling (TV's for example, do not).
    Please see our website for more information: http://www.skype.com/en/features/group-video-chat/.

  • HT4137 iCloud setup with one Apple ID and multiple devices

    iCloud setup with one Apple ID and multiple devices

    What, exactly, are you trying to do? You can use the same iCloud account on as many devices as you want, as long as you don't turn on iTunes Match. Once you turn on Match, you're limited to 10 devices total.
    Is this what you want to do...same iCloud account, but different iTunes/App store accounts on each device? If so, you can do that also.

  • TS3367 We have one Apple I'd and multiple devices, and are not getting FaceTime to work between the devices on the same id

    We have one apple I'd with multiple devices and FaceTime will not work between them?

    Put separate email addresses (free gmail) on each device.
    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    iOS: FaceTime is 'Unable to verify email because it is in use'
    http://support.apple.com/kb/TS3510
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
    http://support.apple.com/kb/HT5538
    How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
    http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Troubleshooting iMessage Issues: Some Useful Tips You Should Try
    http://www.igeeksblog.com/troubleshooting-imessage-issues/
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
    FaceTime, Game Center, Messages: Troubleshooting sign in issues
    http://support.apple.com/kb/TS3970
    How to Block Someone on FaceTime
    http://www.ehow.com/how_10033185_block-someone-facetime.html
    My Facetime Doesn't Ring
    https://discussions.apple.com/message/19087457
    To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
    How to Send SMS from iPad
    http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
    You can check the status of the FaceTime/iMessage servers at this link.
    http://www.apple.com/support/systemstatus/
     Cheers, Tom

  • Using DATA_CELL and multiple queries into one table

    Hi WAD experts,
    I have been trying to work out how to combine multiple hidden query result sets in their own tables in the template, into one table displayed as if the data originated from one query.
    I have been looking at using the DATA_CELL method of "modify table" class.
    Has anyone had to do this before - and if so do you have any clues as to how best to do this ?
    Thanks
    Chris

    Here is what I want:
    Say I have a query that tells me about how many items were sold at a hardware store for each week. Then the output would look something like this:
    Week,Item,Num_Sold
    13,Hammer,15
    13,Nail,594
    13,Screw,398
    14,Hammer,16
    14,Nail,382
    14,Screw,331
    But I want my output to look like this:
    <space>,13,14 <-- these would be the week numbers
    Hammer,15,16
    Nail,594,382
    Screw,398,331
    I asked this same question in a SQL-only forum and one person responded that they did not know how to do that. But I figure that this is done often enough that there must be some Open Source program that can transform the output data into a table. As you can see, it's not a pure transform. It's more like I take one column, make that the x-axis, another column, make that the y-axis, and "plot" the data based on the two columns. It's kinda like taking 1D data and making it 2D. There's no existing open source program which does this? I figure that I could just give the program my SQL queries, specify some rule such as "Make the first column of the resultset the row, make the second column the column and create a table with the 3rd row, using the first two rows to map the 3rd row into the table". Note that I think this only works with 3 columns.
    Anyway, if there is no simple program that already does this, I can make a program to do what I just described. I just asked the question here because I figure that there are a lot of people knowledgeable about SQL and Java on this forum and that someone would know of a tool which already does what I want if one exists.

  • Multiples galleries linked to and from one page

    This is pretty basic need for photographers trying to show shoots to clients.
    I have multiple shoots associated with one job for one client. Can anyone ( ahem Apple guys) put a feature into the Aperture Web Gallery workflow that will put an index page for all the different parts of one job?
    G5 dual 2   Mac OS X (10.4.7)   Apertue 1.1.2

    Hello, Larry
    Quote: "I have multiple shoots associated with one job for one client. Can anyone ( ahem Apple guys) put a feature into the Aperture Web Gallery workflow that will put an index page for all the different parts of one job?"
    If I understand you correctly, you want different Index.htmls for the different shoots you did for the client? So, one index.html for one shoot which multiple photos? Another, index.html for a different shoot but the same client? But all in location in one site?
    If so, Aperture rocks doing this now since version 1.
    I do this using the Web Journal (and not the Web Gallery) feature in Aperture which will make different index.htmls for different days, shoots, whatever.
    Here is an example:
    Multiple shoots and multiple indexes but only one site.
    As you can see there are 3 different index.htmls, and each with it's own set of photographs with watermarks which can be clicked on to enlarge.
    You can rename each index according to your shoots, watermark them and upload them for the client to see at his or her leisure.
    love & peace,
    victor

Maybe you are looking for