OWB11g error installing workflow on Solaris

Has anyone installed the workflow in the owb directory with 11g. The schema gets created, but if fails in a later stage saying it cannot connect to the server and check the ORMI port. Anyone run into this before?

You need to ensure that OS package SUNWuiu8 is installed on your Solaris. You may get this error if this package is not installed.
If you do not know how to do this, contact your System or Unix Administrator.
Note that this package may not be listed in your documentation. See Note 290034.1 on Metalink if you can

Similar Messages

  • Error installing KDE in Solaris 9!

    Hello All:
    I got anerror trying to install KDE in solaris 9 using this command:
    pkg-get -i kde_gcc
    It stars to install via internet, everything is ok, when it reach the koffice_addons packet, it says:
    Analysing special files...
    1109 blocks
    pkgadd: ERROR: attempt to process datastream failed
    -bad format in datastream table-of-contents
    pkgadd: ERROR: could not process datastream from </var/pkg-get/downloads/koffice_addons-1.3-SunOS5.8-all-CSW.pkg.gz>
    ERROR: could not add CSWkofficeaddons.
    ERROR: install of CSWkofficeaddons failed
    ERROR: could not install required dependancies for CSWkdegcc
    Could it be a packet error? I tried downloading the packet in different urls and it says always the same, error, I also tried to install the packet by myself with pkgadd but it gives me the same error, can you help me with this???
    Thank you all!

    Can you try with jreLoc parameter -
    ./runInstaller -jreLoc <path of JRE 1.6>
    You may refer -
    SOA Suite Installation
    Regards,
    Anuj

  • Error installing agent on solaris

    Can anyone help me resolve the follwoing error?
    ERROR: Unable to convert from "UTF-8" to "" for NLS!

    You need to ensure that OS package SUNWuiu8 is installed on your Solaris. You may get this error if this package is not installed.
    If you do not know how to do this, contact your System or Unix Administrator.
    Note that this package may not be listed in your documentation. See Note 290034.1 on Metalink if you can

  • Error installing SOA in Solaris 10 x86 VM

    I am trying to install SOA 11.1.1.2.0 on Solaris 10 x86 VM machine. When the runInstaller is invoked from Disk1, i get the following error and the installer quits. Any clues?
    -bash-3.00$ ./runInstaller
    ./runInstaller: /export/home/oracle/ofm_soa_generic_11/Disk1/install/solaris/runInstaller: cannot execute
    ./runInstaller: syntax error at line 299: `count1=$' unexpected

    Can you try with jreLoc parameter -
    ./runInstaller -jreLoc <path of JRE 1.6>
    You may refer -
    SOA Suite Installation
    Regards,
    Anuj

  • Getting Error while Installing Workflow Manager 1.0 on Sharepoint 2013 On-Prem server

    I am trying to install Workflow Manager 1.0 on our SharePoint Server 2013 which is On-Prem installation. The SharePoint Server 2013 is functioning correctly. During the installation of Workflow Manager 1.0 on the same SharePoint 2013 server, I receive the
    following message: "Port number 9355 specified for HTTPS Port is blocked" I have checked our firewall Inbound rules and this port is not blocked.
    Any reason why this could be happening or did I miss anything?
    Thanks Snehal H.Rana SharePoint Consultant

    I am happy to inform you that I was able to resolve this error. I configured this on different ports other than 9355. We need to modify 2 files called "ClusterManifest.1.0.xml" and "ClusterManifest.current.xml" in c:\Program
    Files\Windows Fabric\Bin. They were pointing to older FQDN under following node:
     <NodeList>
            <Node NodeName="yourserverfqdn" IPAddressOrFQDN="yourserverfqdn" IsSeedNode="true" NodeTypeRef="DefaultNodeType" />
          </NodeList>
    These files won't let you edit directly in notepad so you will need to make a copy of these files (just in case). Open up the notepad as "Run As Administrator". Drag these files to the notepad. After you are done editing, save these as original
    names but make sure that the extension is .xml
    You will also need to do IISReset
    That did the trick for me.
    Thanks Snehal H.Rana SharePoint Consultant

  • Install Errors for 9i on Solaris 9

    I am installing Oracle 9i Solaris 9 and the install went well until the Oracle Database Configuration Assistant. It failed with the following errors:
    Oracle Database Configuration Assistant Errors for install
    ORA-27303
    ORA-27146
    ORA-27300
    ORA-27301
    ORA-27302
    Can someone enlighten me as to what these mean?
    Message was edited by:
    d072330

    For all of those newbies like me I forgot to set some system settings. Here are the system settings I needed to put into /etc/system:
    set semsys:seminfo_semmni=100
    set semsys:seminfo_semmns=3000
    set semsys:seminfo_semmsl= 256
    set shmsys:shminfo_shmmax=4294967295
    set shmsys:shminfo_shmmin=1
    set shmsys:shminfo_shmmni=200
    set shmsys:shminfo_shmseg=20

  • Install oracle10g at solaris 10 x86 platform ORA-07445 error occured

    I meet a problem when install oracle10g at solaris 10.when create database, the dbca display infomation:
    ora-03113 "end-of-file on communication channel"
    ora-03114 ORACLE not available
    Perhaps someone can give me some advices ?
    Its very urgent
    Thanks and Best Regards
    Dillon.xu
    OS: solaris10g
    # showrev
    Hostname: v40-1
    Hostid: 24ea10ed
    Release: 5.10
    Kernel architecture: i86pc
    Application architecture: i386
    Hardware provider:
    Domain: test.com
    Kernel version: SunOS 5.10 s10_74
    v40-1# prtconf |grep Mem
    Memory size: 2048 Megabytes
    database: oracle10g 10.1.0.3
    Oracle trace file info:
    export/home/oracle/product/10.0/rdbms/log/ora10g_ora_1759.trc
    Oracle Database 10g Enterprise Edition Release 10.1.0.3.0 - Production
    With the Partitioning, OLAP and Data Mining options
    ORACLE_HOME = /export/home/oracle/product/10.0
    System name: SunOS
    Node name: v40-1
    Release: 5.10
    Version: s10_74
    Machine: i86pc
    Instance name: ora10g
    Redo thread mounted by this instance: 0 <none>
    Oracle process number: 0
    1759
    kstwlb: SGA is no longer mapped
    Exception signal: 11 (SIGSEGV), code: 1 (Address not mapped to object), addr: 0x
    59fffff4
    *** 2005-02-22 14:20:07.861
    ksedmp: internal or fatal error
    ORA-07445: exception encountered: core dump [SIGSEGV] [Address not mapped to obj
    ect] [1509949428] [] [] []
    Current SQL information unavailable - no session.
    ----- Call Stack Trace -----
    calling call entry argument values in hex
    location type point (? means dubious value)

    10g on Solaris 10 isn't yet supported. It is announced for March 2005.

  • Errors when installing Workflow Manager

    I am trying to install WF Manager, but with no success.
    On the same machine, I have installed SQL Server 2014, SharePoint 2013 with SP1 and WF Manager.
    I installed WF manager (account that runs WF manager is sp farm admin) and registered with command
    Register-SPWorkflowService -SPSite "http://dev/" -WorkflowHostUri "http://localhost:12291" -AllowOAuthHttp
    In Central Admin, when I click on "Workflow Service Application Proxy ", I get message that WF is connected. Backend service is running. In SP Designer, I can create 2013 Workflow and publish it, but that WF does not work, it break instantly.
    In SP logs, I get this error when I try to activate feature that contains workflow (solution that contains WF created in Visual Studio):
    http://radioaddictsanonymous.com/view/635399286724222582163282/error-while-deploying-sp2013-workflow-from-vs2012-nullreferenceexception
    So, I deleted WF manager and service bus and reinstalled it, but with no luck. Now backedn service is not working, and I can't start it, getting this error:
    "The Workflow Manager Backend service could not be started  A system error has occurred  System error 1067 has occurred"
    In Event Viewer I have this error:
    https://social.technet.microsoft.com/Forums/office/en-US/de554aed-c9ae-4725-82fa-251446bacc20/workflow-manager-10-sharepoint-2013-the-process-was-terminated-due-to-an-unhandled-exception?forum=sharepointgeneral
    I have tried to reinstall everything couple of times, but it doesn't work. I think that I am not deleting everything related to workflow before reinstallation. How can I unregister already registered WF service and reinstall everything correctly??

    Hi,I had already done disableloopbackcheck and it did not matter.No problem with creating scopes (using powershell) but pairing fails anyway.Here is the config from a local explorer connection to the HTTPS port:(And following it, you may see the result of
    a scope enumerator script)
    <?xml version="1.0"?>
    <ScopeInfo xmlns="http://schemas.microsoft.com/workflow/2012/xaml/activities" xmlns:i="http://www.w3.org/2001/XMLSchema-instance">
    <ChildScopeCount>3</ChildScopeCount>
    <DefaultWorkflowConfiguration/>
    <Description>For / sample only</Description>
    <LastModified>2013-11-08T21:22:00.967</LastModified>
    <LastRevised>2013-11-08T00:04:31.88</LastRevised>
    <Path>/</Path>
    <SecurityConfigurations>
    <ScopedSecurityConfiguration i:type="WindowsSecurityConfiguration">
    <Name>Microsoft.Workflow.Management.Security.WindowsSecurityConfiguration</Name>
    <WorkflowAdminGroupName>altemis\WorkflowAdmins</WorkflowAdminGroupName>
    </ScopedSecurityConfiguration>
    </SecurityConfigurations><
    Status>Active</Status>
    </ScopeInfo>
    PS C:\Shared> C:\Shared\WF Script-Enumaret Scopes.ps1
    Name:
    Path: /
    Status: Active
    User Comments: For / sample only
    Parent: None
    Children: 3
    Exception calling "GetChildScopes" with "0" argument(s): "Scope '/$ChildScopes' was not found.  HTTP headers received from 
    the server - ActivityId: 616224db-0321-450a-92ef-f03384c008a2. NodeId: ALTEMIS-SVR02. Scope: /$ChildScopes. Client 
    ActivityId : 649dba85-dc89-0002-d9bf-9d6489dcce01."
    At C:\Shared\WF Script-Enumaret Scopes.ps1:21 char:9
    +         $manager.GetChildScopes() | % { WriteScopeInfo $scopeUri $_.Path $scope. ...
    +         ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : NotSpecified: (:) [], MethodInvocationException
        + FullyQualifiedErrorId : ScopeNotFoundException
    Muharrem

  • Error in installing workflow

    i installed complete 9ias, and then trying to install workflow, by specifing infrastructure_home(as oracle home), while installing workflow, i am getting the following exception,
    "unable to find product oracle.swd.jre(1.1.6, 1.1.7.27) in oracle inventary"
    Please suggest me.
    Thanks and Regards
    Ram

    Hi,
    Make sure your default Oracle Home is 10g one. You can check that by running sqlplus in command promot and should show you the 10g version.
    HTH,
    catalin ciontu.

  • Error installing OBIEE 11g on Linux 64 bits - Configuration Assistant fails

    Hello,
    I am trying to install OBISE1 on Oracle Linux 5 - 64 bits.
    I've followed these steps:
    1) Install Oracle DB
    2) Install jdk Linux 64 bits (jdk1.7.0)
    3) Install WebLogic
    4) Install RCU
    5) Install OBI 11g (Software only installation)
    Until here, all is correct.
    6) Configuration assistant failed:
    [2011-09-12T12:04:58.844+02:00] [as] [ERROR] [] [oracle.as.provisioning]
    [tid: 14] [ecid: 0000J9Soq_rFGBWFLz6UOA1ERSJh000005,0]
    [2011-09-12T12:04:58.845+02:00] [as] [ERROR] [] [oracle.as.provisioning]
    [tid: 14] [ecid: 0000J9Soq_rFGBWFLz6UOA1ERSJh000005,0] [[
    oracle.as.provisioning.util.ConfigException:
    Error while starting the domain.
    Cause:
    Starting the Admin_Server timed out.
    Action:
    See logs for more details.
    at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
    at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3149)
    at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3039)
    at oracle.as.provisioning.engine.WorkFlowExecutor._startAdminServer(WorkFlowExecutor.java:1645)
    at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:635)
    at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
    at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
    at oracle.as.install.bi.biconfig.standard.StandardWorkFlowExecutor.executeHelper(StandardWorkFlowExecutor.java:31)
    at oracle.as.install.bi.biconfig.standard.DomainProvisioningTask.doExecute(DomainProvisioningTask.java:48)
    at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
    at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
    at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:112)
    at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
    at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
    at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
    at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
    at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
    at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
    at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
    at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
    at java.lang.Thread.run(Thread.java:662)
    [2011-09-12T12:04:58.846+02:00] [as] [ERROR] [] [oracle.as.provisioning]
    [tid: 14] [ecid: 0000J9Soq_rFGBWFLz6UOA1ERSJh000005,0] [[
    oracle.as.provisioning.exception.ASProvWorkflowException: Error Executing workflow.
    at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:686)
    at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
    at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
    at oracle.as.install.bi.biconfig.standard.StandardWorkFlowExecutor.executeHelper(StandardWorkFlowExecutor.java:31)
    at oracle.as.install.bi.biconfig.standard.DomainProvisioningTask.doExecute(DomainProvisioningTask.java:48)
    at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
    at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
    at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:112)
    at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
    at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
    at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
    at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
    at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
    at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
    at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
    at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
    at java.lang.Thread.run(Thread.java:662)
    I have fount posts with a similar problem, but is over Windows.
    I appreciate any ide/suggestion.
    Thank you in advance.
    Regards,

    I have seen that WebLogic is shut down, so I am trying to start up, but I can't:
    starting weblogic with Java version:
    Unrecognized option: -jrockit
    Error: Could not create the Java Virtual Machine.
    Error: A fatal exception has occurred. Program will exit.
    Starting WLS with line:
    /usr/java/jdk1.7.0/bin/java -jrockit -Xms512m -Xmx512m
    -Dweblogic.Name=AdminServer
    -Djava.security.policy=/root/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.policy
    -Dweblogic.ProductionModeEnabled=true -da
    -Dplatform.home=/root/Oracle/Middleware/wlserver_10.3
    -Dwls.home=/root/Oracle/Middleware/wlserver_10.3/server
    -Dweblogic.home=/root/Oracle/Middleware/wlserver_10.3/server
    -Dweblogic.management.discover=true -Dwlw.iterativeDev=false -Dwlw.testConsole=false -Dwlw.logErrorsToConsole=false -Dweblogic.ext.dirs=/root/Oracle/Middleware/patch_wls1035/profiles/default/sysext_manifest_classpath:/root/Oracle/Middleware/patch_ocp360/profiles/default/sysext_manifest_classpath
    weblogic.Server
    Unrecognized option: -jrockit
    Error: Could not create the Java Virtual Machine.
    Error: A fatal exception has occurred. Program will exit.
    I have modified /etc/profile, including JAVA_HOME and PATH with the java PATH. And it is ok, because if I executed java -version I can see the new jdk:
    java version "1.7.0"
    Java(TM) SE Runtime Environment (build 1.7.0-b147)
    Java HotSpot(TM) 64-Bit Server VM (build 21.0-b17, mixed mode)
    Any idea¿?

  • "No Disk Found" error during installation of Solaris 10[11/06] on HP 6710b

    Hallo Guys,
    I am trying to install Solaris 10 on my HP 6710b lap top but it fails with "No Disk Found" error.
    I used "Solaris 10 support tool" to check my system and it reports that my system is supported.
    You can find the report bellow. I am sure that my disk is OK and I am also using "CD-ROM" option in BIOS for installing solaris from my Solaris DVD.
    I have also updated the drivers using "CPQary3-1.71-solaris10-i386".
    Please help me.
    Thanks,
    Qumar
    Report of Sun Device Detection Tool
    The table below displays the devices detected in your system along with the corresponding driver status in Solaris 10 8/07 on x86/x64 platforms.
    All detected devices are supported by Solaris OS.
    Solaris Driver 32-bit
    Solaris Driver 64-bit
    Device Type
    Vendor Name
    Device Name
    Solaris Bundled Driver: pcic
    Solaris Bundled Driver: pcic
    Bridge
    Ricoh Co Ltd
    RL5c476 II
    Solaris Bundled Driver: hci1394
    Solaris Bundled Driver: hci1394
    Firewire
    Ricoh Co Ltd
    R5C832 IEEE 1394 Controller
    Third-Party Driver: bcme (Note-1)
    Third-Party Driver: bcme (Note-1)
    Network
    Broadcom Corporation
    NetLink BCM5787M Gigabit Ethernet PCI Express
    Solaris Bundled Driver: ahci
    Solaris Bundled Driver: ahci
    Storage
    Intel Corporation
    82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller
    Solaris Bundled Driver: uhci
    Solaris Bundled Driver: uhci
    USB
    Intel Corporation
    82801H (ICH8 Family) USB UHCI Controller #1
    Solaris Bundled Driver: uhci
    Solaris Bundled Driver: uhci
    USB
    Intel Corporation
    82801H (ICH8 Family) USB UHCI Controller #2
    Solaris Bundled Driver: uhci
    Solaris Bundled Driver: uhci
    USB
    Intel Corporation
    82801H (ICH8 Family) USB UHCI Controller #3
    Solaris Bundled Driver: uhci
    Solaris Bundled Driver: uhci
    USB
    Intel Corporation
    82801H (ICH8 Family) USB UHCI Contoller #4
    Solaris Bundled Driver: uhci
    Solaris Bundled Driver: uhci
    USB
    Intel Corporation
    82801H (ICH8 Family) USB UHCI Controller #5
    Solaris Bundled Driver: ehci
    Solaris Bundled Driver: ehci
    USB
    Intel Corporation
    82801H (ICH8 Family) USB2 EHCI Controller #1
    Solaris Bundled Driver: ehci
    Solaris Bundled Driver: ehci
    USB
    Intel Corporation
    82801H (ICH8 Family) USB2 EHCI Controller #2
    [W] Solaris Bundled Driver: audiohd
    [W] Solaris Bundled Driver: audiohd
    Multimedia
    Intel Corporation
    82801H (ICH8 Family) HD Audio Controller
    Solaris Bundled Driver: pci-ide
    Solaris Bundled Driver: pci-ide
    Storage
    Intel Corporation
    82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller
    [W] Solaris Bundled Driver: vgatext
    [W] Solaris Bundled Driver: vgatext
    Video
    Intel Corporation
    Mobile GM965/GL960 Integrated Graphics Controller
    Open Solaris Driver: wpi (Note-2)
    Open Solaris Driver: wpi (Note-2)
    Network
    Intel Corporation
    PRO/Wireless 3945ABG Network Connection
    [W]: (1) No Dedicated Xorg Driver supporting Graphic Interface
    (2) Driver support for indicated device not guaranteed
    Note-1: http://www.broadcom.com/support/ethernet_nic/.
    Note-2: http://opensolaris.org/os/community/laptop/wireless/wpi.

    Hallo Guys,
    I am trying to install Solaris 10 on my HP 6710b lap top but it fails with "No Disk Found" error.
    I used "Solaris 10 support tool" to check my system and it reports that my system is supported.
    You can find the report bellow. I am sure that my disk is OK and I am also using "CD-ROM" option in BIOS for installing solaris from my Solaris DVD.
    I have also updated the drivers using "CPQary3-1.71-solaris10-i386".
    Please help me.
    Thanks,
    Qumar
    Report of Sun Device Detection Tool
    The table below displays the devices detected in your system along with the corresponding driver status in Solaris 10 8/07 on x86/x64 platforms.
    All detected devices are supported by Solaris OS.
    Solaris Driver 32-bit
    Solaris Driver 64-bit
    Device Type
    Vendor Name
    Device Name
    Solaris Bundled Driver: pcic
    Solaris Bundled Driver: pcic
    Bridge
    Ricoh Co Ltd
    RL5c476 II
    Solaris Bundled Driver: hci1394
    Solaris Bundled Driver: hci1394
    Firewire
    Ricoh Co Ltd
    R5C832 IEEE 1394 Controller
    Third-Party Driver: bcme (Note-1)
    Third-Party Driver: bcme (Note-1)
    Network
    Broadcom Corporation
    NetLink BCM5787M Gigabit Ethernet PCI Express
    Solaris Bundled Driver: ahci
    Solaris Bundled Driver: ahci
    Storage
    Intel Corporation
    82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller
    Solaris Bundled Driver: uhci
    Solaris Bundled Driver: uhci
    USB
    Intel Corporation
    82801H (ICH8 Family) USB UHCI Controller #1
    Solaris Bundled Driver: uhci
    Solaris Bundled Driver: uhci
    USB
    Intel Corporation
    82801H (ICH8 Family) USB UHCI Controller #2
    Solaris Bundled Driver: uhci
    Solaris Bundled Driver: uhci
    USB
    Intel Corporation
    82801H (ICH8 Family) USB UHCI Controller #3
    Solaris Bundled Driver: uhci
    Solaris Bundled Driver: uhci
    USB
    Intel Corporation
    82801H (ICH8 Family) USB UHCI Contoller #4
    Solaris Bundled Driver: uhci
    Solaris Bundled Driver: uhci
    USB
    Intel Corporation
    82801H (ICH8 Family) USB UHCI Controller #5
    Solaris Bundled Driver: ehci
    Solaris Bundled Driver: ehci
    USB
    Intel Corporation
    82801H (ICH8 Family) USB2 EHCI Controller #1
    Solaris Bundled Driver: ehci
    Solaris Bundled Driver: ehci
    USB
    Intel Corporation
    82801H (ICH8 Family) USB2 EHCI Controller #2
    [W] Solaris Bundled Driver: audiohd
    [W] Solaris Bundled Driver: audiohd
    Multimedia
    Intel Corporation
    82801H (ICH8 Family) HD Audio Controller
    Solaris Bundled Driver: pci-ide
    Solaris Bundled Driver: pci-ide
    Storage
    Intel Corporation
    82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller
    [W] Solaris Bundled Driver: vgatext
    [W] Solaris Bundled Driver: vgatext
    Video
    Intel Corporation
    Mobile GM965/GL960 Integrated Graphics Controller
    Open Solaris Driver: wpi (Note-2)
    Open Solaris Driver: wpi (Note-2)
    Network
    Intel Corporation
    PRO/Wireless 3945ABG Network Connection
    [W]: (1) No Dedicated Xorg Driver supporting Graphic Interface
    (2) Driver support for indicated device not guaranteed
    Note-1: http://www.broadcom.com/support/ethernet_nic/.
    Note-2: http://opensolaris.org/os/community/laptop/wireless/wpi.

  • Cant install agent11g on Solaris 9

    Hi
    I do have problem installing agent on solaris 9 64 bit.
    I tried tree ways - pushing agent from OMS, downloading agent using agentDownload and cloning agent from almost identical machine.
    Installation script start failing on the linking step giving errors about not being able to link. All prerequisites for agent are met.
    The third solution works until starting agent.
    Agent doesn't start throwing an error:
    emctl start agent
    ld.so.1: /export/home/oracle/agent11g/perl/bin/perl: fatal: attempt to open file with null name
    Killed
    If I execute this being in AGENT_HOME directory but using emctl.pl:
    bash-2.05$ perl ./bin/emctl.pl start agent
    Can't locate lib.pm in @INC (@INC contains: ../lib/5.10.0/sun4-solaris-thread-multi-64 ../lib/5.10.0 ../lib/site_perl/5.10.0/sun4-solaris-thread-multi-64 ../lib/site_perl/5.10.0 ../lib/5.10.0 ../lib/5.10.0/sun4-solaris-thread-multi-64 ../lib/site_perl .) at ./bin/emctl.pl line 201.
    BEGIN failed--compilation aborted at ./bin/emctl.pl line 201.
    If I go to perl/bin directory and execute the same, adjusting paths:
    bash-2.05$ cd perl/bin
    bash-2.05$ perl ../../bin/emctl.pl start agent
    Exception in thread "main" java.lang.UnsupportedClassVersionError: oracle/sysman/emSDK/conf/TargetInstaller (Unsupported major.minor version 50.0)
    at java.lang.ClassLoader.defineClass0(Native Method)
    at java.lang.ClassLoader.defineClass(ClassLoader.java:509)
    at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:123)
    at java.net.URLClassLoader.defineClass(URLClassLoader.java:246)
    at java.net.URLClassLoader.access$100(URLClassLoader.java:54)
    at java.net.URLClassLoader$1.run(URLClassLoader.java:193)
    at java.security.AccessController.doPrivileged(Native Method)
    at java.net.URLClassLoader.findClass(URLClassLoader.java:186)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
    at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:265)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:262)
    at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:322)
    EM Configuration issue. not found.
    Can someone help me with this?
    Thanks
    EDIT: during linking I get this error:
    INFO: ld: fatal: library -lclntsh: not found
    Edited by: Jarek Jozwik on 10-Feb-2011 08:50
    I do also get those errors:
    INFO: /export/home/oracle/agent11g/bin/genoccish
    INFO: ld: fatal: relocation error: file /export/home/oracle/agent11g/lib/libocci11.a(occiSQLExceptionImpl.o): section .rela.text: invalid
    relocation type: 0x52
    INFO: ld: fatal: relocation error: file /export/home/oracle/agent11g/lib32/libocci11.a(occiSQLExceptionImpl.o): section .rela.text: inval
    id relocation type: 0x52
    INFO: /export/home/oracle/agent11g/bin/genagtsh /export/home/oracle/agent11g/lib/libagtsh.so 1.0
    INFO: ld: fatal: relocation error: file /export/home/oracle/agent11g/lib/shoc.o: section .rela.text: invalid relocation type: 0x52
    INFO: ld: fatal: relocation error: file /export/home/oracle/agent11g/lib32/shoc.o: section .rela.text%shocodat_os_date_to_julian: invalid
    relocation type: 0x52
    Edited by: Jarek Jozwik on 10-Feb-2011 08:59

    Hi Jarek,
    I do not know to much about Solaris but this note (the truss command) cold give you a clue what is going on: 11g Grid Agent: Executing emctl Fails with 'Segmentation Fault' on Solaris 5.9 (Update 2) [ID 1140615.1]
    Also: 11gR1 on Solaris failing at relink phase with errors like "ld: fatal: relocation error" and then "ld: fatal: library -lclntsh: not found" [ID 848700.1] could be of help regarding the link (lclntsh) error.
    Eric

  • Oracle 9i install failing on Solaris 10

    Oracle 9i install on Solaris 10 fails at the Database creation stage with Ora error "Out of Memory"
    I have a Ultra 10 with 1GB RAM, 2GB swap and lot of space in the filesystem where I am installing Oracle
    The oracle release notes asks for increased value for shmmax, shmmni etc by editing /etc/system and according to Solaris 10, it is not required as kernel dynamically allocates those values. It looks like it is NOT. How can I verify?
    rcladm talks about shmmax values only with projects. How can I verify that all my applications running on a this box has a higher SHMMAX values and not on per project basis.
    In older versions, sysdef could tell us the current SHMMAX values. Is there any comparable commands in Solaris 10.
    I am not that comfortable with the rcladm features. Can some one show some examples.
    Is anyone successful in installing Oracle9i on Solaris 10. I heard Oracle patch set 9.2.0.5 and 9.2.0.6 is certified with Solaris 10. Does it mean the original version of 9.2 does not install on Solaris 10?

    'Net Configuration Assistant is failing" from installation. I tried twice and got the same problem. I tried to run 'netca' from the command line and got the same problem - Java runtime problem. I tried to install patch and could not find Oracle patches for Solaris 10 and the patches are for Solaris 9.
    Does anyone have suggestion?
    $ ./netca
    ld.so.1: /usr/ora/920/oracle.swd.jre/bin/sparc/native_threads/jre: fatal: relocation error: file /usr/ora/920/oracle.swd.jre/bin/../lib/sparc/native_threads/libawt.so: symbol XShmQueryExtension: referenced symbol not found (/usr/ora/920/oracle.swd.jre/bin/../lib/sparc/native_threads/libawt.so)
    ld.so.1: /usr/ora/920/oracle.swd.jre/bin/sparc/native_threads/jre: fatal: relocation error: file /usr/ora/920/oracle.swd.jre/bin/../lib/sparc/native_threads/libawt.so: symbol XShmQueryExtension: referenced symbol not found (/usr/ora/920/oracle.swd.jre/bin/../lib/sparc/native_threads/libawt.so)
    java.lang.NullPointerException
    at oracle.ewt.lwAWT.BufferedApplet.<init>(Compiled Code)
    at oracle.net.ca.NetCA.<init>(Compiled Code)
    at oracle.net.ca.NetCA.main(Compiled Code)

  • Install nagios on solaris 10

    hi
    can any one help me to install nagios on solaris 10.But i got a document from
    www.totkat.org/pages/nagios.shtml. but it is giving errors.
    i am expecting your valuable hints to do

    I've insaller SUNWlibm and the make is going further now but still ends in a fatal error:
    then mv -f ".deps/pst3-pst3.Tpo" ".deps/pst3-pst3.Po"; else rm -f ".deps/pst3-pst3.Tpo"; exit 1; fi
    pst3.c:1: sorry, unimplemented: 64-bit mode not compiled in
    *** Error code 1
    make: Fatal error: Command failed for target `pst3-pst3.o'
    Current working directory /usr/share/src/nagios-plugins-1.4.13/plugins-root
    *** Error code 1
    The following command caused the error:
    failcom='exit 1'; \
    for f in x $MAKEFLAGS; do \
    case $f in \
    *=* | --[!k]*);; \
    k) failcom='fail=yes';; \
    esac; \
    done; \
    dot_seen=no; \
    target=`echo all-recursive | sed s/-recursive//`; \
    list='gl lib plugins plugins-scripts plugins-root po'; for subdir in $list; do \
    echo "Making $target in $subdir"; \
    if test "$subdir" = "."; then \
    dot_seen=yes; \
    local_target="$target-am"; \
    else \
    local_target="$target"; \
    fi; \
    (cd $subdir && make $local_target) \
    || eval $failcom; \
    done; \
    if test "$dot_seen" = "no"; then \
    make "$target-am" || exit 1; \
    fi; test -z "$fail"
    make: Fatal error: Command failed for target `all-recursive'
    Current working directory /usr/share/src/nagios-plugins-1.4.13
    *** Error code 1
    make: Fatal error: Command failed for target `all'
    another suggestion? the SUNWlibm was necessary so thank you for that.

  • Install DBI on Solaris 10

    Hi,
    I am trying to install DBI on solaris 10 (SPARC - 64 bit).
    I got an error message after using command make
    sh: cc: not found
    Error code 1
    make: Fatal error: Command failed for target 'Perl.o'
    Does someone know how to solve the problem?
    Thanks

    Try this guy's list, he maintain an archive of Solaris package.
    http://www.ibiblio.org/pub/packages/solaris/sparc/html/creating.solaris.packages.html
    Of course, if you can get directly from Sun will be better.

Maybe you are looking for

  • How to tanslate Korean to English through PL/SQL

    The following blocks can translate English to Korean. But how can I translate Korean into English? utl_url.ESCAPE does not work when Korean or other double byte characters passed in. SET define OFF SET serveroutput ON BEGIN DECLARE txt VARCHAR2(100);

  • Starting Crystal Reports 2011

    I don't know if this is the right forum, but my question is very basic, hopefully with a simple answer.  I've updated from CR v11 to CR 2011, and the installation seemed to be without problem.  But HOW DO YOU START THE THING?!!  No new icon left on d

  • Non cumulative - some differences between MB5B and a clone of the 0IC_C03.

    hi experts, I have a matter with the stock values who are differents between the result of the MB5B transaction (R/3), and a result of a query for the major materials and for a set of plants. the data flow and delta was built in 2006 with all the sup

  • Running a db2 command from Java Application ??

    Hi All, I have to write an application in JDBC that can retrieve a list of databases on a db2 server, the only way I know is the db2 command "list database directory", but I can not use it in a JAVA program, is there a solution for this? Can anyone h

  • Problems installing debugger version of flash player

    I tried to install the debugger version of flash player on a Windows 7 64 bit machine using Firefox as my browser, but got the following installation error:"The version of Adove Flashplayer that you are trying to install is not the most current versi