OWB11g on WIndows 64-bit server

I've installed OWB11g on Windows Server 2003 64-bit and found it will not work (db version 11.1.0.6.0) with 10g 64-bit sources and targets.
Problems include:
- OWBs inability to connect these source and target locations to move data in any way
- the table 'object editor' does not work
- one of the location tabs for the target module is unusable.
- The location information for the target module property cannot be chosen.
Has anyone experienced this too or found solution(s)?
Thanks
Lee

Hi,
well it sounds like you´ve migrate your Project from one Platform to another, correct?
I think you didn´t do this on the correct Way.
I´ve tried two or three Times to migrate a Project to another Server, there where many Problems.
So, i even go the harder Way and create Repository ans Target Schematas new and after that i deploy the whole Metadatas again, when i migrate.
I think that might be your Problem, `cause i dont´t think that there´re Problems if you use the highest Versions of Oracle DB and OWB together :-)
Regards
Lone

Similar Messages

  • Oracle gateway for Oracle 10g DB on Windows 64 bit server

    Is there any place that I can find Oracle dateway for Oracle 10g DB on Windows 64 bit server? I can only find Gateway for Oracle 11g on Windows 32 bit server. Please help me to identify this. Thanks.

    yingkuan:
    Thanks a lot. The link tells the details. It seems that Oracle has not release Gateway for Oracle database 10.2.0.x on Windows 64 bit server. Probably they don't do it.
    So under this circumstance, if I want to install Gateway (32 bit) on Oracle 10.2.0.3 DB on Windows 64 bit server for Teradata, I probably have to install Gateway software in another Oracle Home, then configure it right. Please give more advice on this. 32 bit Gateway will work for 64 bit database?

  • SAP BPC Partitioning on a Windows 64 bit Server

    Hello, we are considering SQL Server 2005 partitioning the SAP BPC (V5 SP3) time dimension by month on a Windows 64 bit Server since we curently have more than 70 million records in the application FACT table.  Has any body got any experience of partitioning with Windows 64 bit servers and if so can you provide ay recommendations and did you come across any issues that we should be aware of?

    Hi Wayne,
    It is no difference between 64 bits and 32 bits regarding the partioning of SQL 2005.
    I think you would like to partition the cubes not the table.
    Partioning of table doesn't help for performances but partionning of cube for OLAP it is provide at least 40% improvements for retrieve data (mdx queries).
    So if you know to do the partitioning for 32 bits then you have to follow the same steps for 64 bits.
    If you need information about how to do partitions in general then you can find into wiki information about how you can do partitions for BPC 5.X.
    Regards
    Sorin Radulescu

  • Crystal reports connectiong to Salesforce Driver on Windows 64 bit server

    Hi,
    We are in the process of  migrating our Crystal reports reports from BOXIR2 to R3. The R3 server is built on Wondows 2003 64bit server.
    The reports work fine in 32bit windows2003 server on XIR2 environment.
    Refreshing  the crytsal reports in BOXIR3 nfoview  on 64 bit server in  connceting to SFDC databse fails with a error inavalid database argument.
    Refreshing the same report using CR 2008 client fails with an error message below.
    Invalid Argument provided. Details: Java Server startup failure. Please verify the PATH (JDK), CLASSPATH and IORFileLocation properties in the CRConfig.xml file. In addition, please verify you are using JDK 1.5.
    Any help is appreciated.
    Thanks,
    Chinna

    This error usually means there is an issue with the Sales Force driver. Take a look at SAP Note 1197347 (same issue on an older version of Crystal Reports/BOE software).
    Also take a look at SAP Note 1400317 if you installed SP2 on Crystal Reports 2008, another possible cause
    Edited by: Andrew Kuhn on Apr 21, 2010 2:27 PM

  • Grid 10g agent for windows 64 bit database.

    Hi,
    I was searching for grid agent for our 10g database residing on windows 64 bit server, but couldn't find. please update if available on any site.
    Thanks & Regards.

    See under Oracle Enterprise Manager Downloads, Mass Agent Deployment
    http://www.oracle.com/technetwork/oem/grid-control/downloads/agentsoft-090381.html
    Agent Software for 64-bit Platforms
    Eric

  • BO XI 3.1 SP2 error while installing in Windows 2008 ENT Server 32 Bit

    Hi
    We have  windows 2008 enterprise edition 32 Bit SP2 , While installing  BO 3.1 SP2 we are getting the following error.
    "Some files could not be created.
    Please close all applications, reboot Windows and restart this installation."
    1.we do have enough space as well as we are installing it through administrator account.
    2.I increase the virtual memory size from 2 GB to 4 GB, still same error.
    3.we downloaded the software in two diffrent machines. We tried extracting the "exe" file in two machine but still getting the same error.
    4.We dont have any firewall connected and windows firewall is off.
    Is there BO 3.1 Sp2 is available for windows 2008 ent server 32-Bit?
    Because In the download site there is Windows Server on IA32 32-bit.
    is it the correct version?
    Please help us to solve this problem
    Thanks

    We have opened a ticket for this. After subsequent discussion with the forum support person we have installed BO Enterprise 3.1 SP2 fixed pack 2.5 on the server (Windows Server 2008 SP2). On the client side, we have also installed BO Enterprise 3.1 SP2 fixed pack 2.5 and Live Office SP2 fixed pack 2.5.
    Once we tried to use the Web Intelligence document based on OLAP Universe in excel through Live Office it gives the following error.
    "Failed to get the document information. (LO 26315)  A database error occured. The database error text is: Failed to set properties (The component Microsoft® OLE DB Provider for Analysis Services returned server error (Database 'Sales' does not exist.)). (WIS 10901)(6315)".

  • HTTP Server for Windows 64 bit not on the companion CD

    Hi,
    I cannot find the HTTP Server for Windows 64 bit on the companion CD. Any idea where I can get it from? For the 32bit version the HTTP Server is on the Companion CD.
    Thanks in advance,
    Florin

    If i am correct reason should be : Oracle Application Server 10g will run as a 32-bit application
    Following platforms have the same media in either case:
    Microsoft Windows 32-bit and EM64T/AMD64
    (Not Itanium-64, which is separate and referred to as "Windows 64-bit")
    Linux x86 and Linux x86-64
    Solaris Sparc 32-bit and Solaris Sparc 64-bit
    As the Oracle Application Server 10g will be run as a 32-bit application. See the Installation Guide or readme files for any specific steps on these 64-bit platforms.
    Refer the Note.433061.1 - How to Obtain Application Server 10g Media, Patchsets, and Patches

  • SAPSprint installation on Windows 2008 R2 Server 64-bit

    Dear Gurus,
    as we change our print server to Windows 2008 R2 Server 64-bit I need to install SAPSprint for SAP printing with connection type 'S' out of a NW7.0 based system on HP-UX.
    Till now we used SAPlpd on a 32-bit Windows Server......
    1) Do I simply need to install the xSPrint.exe or can this happen only in combination with the whole SAPGui?
    2) According to note 66971 for Windows 2008 R2 Server 64-bit only SAPGui 7.20 is supported.
    Does this mean that I also have to use SAPSprint release 7.20 or can I use any other release as well.
    On our Windows clients we run SAPGui 7.10.
    Is there any correlation between the SAPGui running on the clients and the SAPGui / SAPSprint release running on the print server or can I simply install the highest SAPSprint release 7.20 on the print server to be sure that it will work with WK8 R2 64-bit?
    I hope I could explain my problem and I am looking forward to your reply.
    Thanks a lot in advance!
    Günter

    Dear Günter.
    Your question is spread over some different areas. Let me point out some tracks to follow:
    There is only a 32-bit version of SAPSprint but that one works also under 64-bit; please refer to SAP note 894444.
    Regarding SAPgui, in general it is recommended to have the last version as it is downwards-compatible with older versions.
    But specially, let me highlight that Windows 2008 R2 is not yet listed in the PAM - and hence not yet supported. The technical prerequisites are met (with a special kernel patch) but not all software is released.
    In fact, and just to provide you further details it is not possible to expect the 710 products released for Windows Server 2008 R2 before around four weeks; 700 products will be released even after 710.
    See SAP note 1383873 ("Windows Server 2008 R2 Support").
    You can be always up to date with the latest Windows news at:
    --> Support of Microsoft Windows Server 2008 R2
    Cheers!

  • Oracle 10g HTTP Web Server on Windows 2008 R2 (64-bit) server.

    I downloaded the Oracle 10g HTTP server for Windows 2008 R2 (64-bit) from the link below
    http://www.oracle.com/technetwork/database/10204-winx64-vista-win2k8-082253.html
    10204_vista_w2k8_x64_production_companion.zip (344,455,851 bytes)
    Did anyone have luck installing the 10g HTTP server on a Windows 2008 R2 (64-bit) server ?
    I could see the installation went fine, but I don't see any "Oracle_HTTP" windows service getting created.

    I have not installed on this OS but I'm betting the service is a different name.
    Check "log on as" under services to narrow your search

  • EPMA(Hyperion 11.1.1.3) installation Errors - on Windows 2003 64 Bit Server

    Hi,
    We trying to install Hyperion 11.1.1.3 components with Hyperion Strategic Finance and EPMA on 64 Bit Windows 2003 R2 Server. We are installing all components on a single server. In the installation process while checking the components, we are getting this below error message.
    "component strategic finance web services cannot be installed
    hfm and epma 64-bit componentscannot co-exist with 32-bit component for hsf/fdm
    component performence architect dimension server services cannot be installed
    hfm and epma 64-bit components cannot co-exist with 32-bit component for hsf/fdm"
    Please share your valuable suggestions to go ahead with this installation,
    Thanks in advance for your earliest replies
    ***Chinna***
    Edited by: Hyperion Chinna on Jul 22, 2010 5:10 AM

    Srikanth,
    The New Atlanta ServletExec portion of the xMII 11.5 installation is not fully compatible with 64 bit windows.  Here is a good reference for you:  http://www.newatlanta.com/c/support/servletexec/self_help/faq/detail?faqId=296
    Regards,
    Jeremy

  • Issues in running flash player activeX on 64 bit windows 2008 R2 server

    When the activeX acts up, users can not type anything into search boxes or use the keyboards in online game sites. From time to time, we have to re-install flash player again.
    We noticed that the FlashUtil64 activeX dll is somehow saved in c:\windows\system32\Macromed\Flash folder while the FlashUtil32 activeX dll is in c:\windows\syswow64\Macromed\Flash folder, is this normal? And when running 32 IE, the flashutil64 shown in the windows running process.
    We installed flash player with 32 bit IE 10 on a 64 bit windows 2008 R2 server.
    Thanks.

    It seems you have used 32bit installers on 64bit machine. Please refer -
    http://anuj-dwivedi.blogspot.com/2010/10/installing-oracle-soa-and-bpm-111130.html
    Regards,
    Anuj

  • Issue with SAP Authentication in a Windows 2003 64 Bits Server

    Hi Experts
        I have an issue in a Windows 2003 64 Bits Server in CMC when i'm in the authentication section i choose SAP the Role Import works fine and I can see the Users Group from SAP BW but the users don't appear.
        I try the same thing in a Windows 2003 32 Bits with the same parameters and works fine i can see de User Groups and The Users from the same BW Server.
    I Think i could be a problem with the 64 bits server the issue is the users from SAP BW are not imported.
    Regards Marvin Soto.

    Hi Ingo,
                  we have some thing similar issue. can you please help us out.
    We Imported users and in options we selected concurrent and every thing worked fine up to 1 month and then automatically our license key say you have only 2 named users. we have a license key for 100 named users now. do we need to delete all the concurrent users from sap now and we need to re-import them by selecting named in options tab of sap. what is the work around for this. i tested by changing the one of the sap user profile to named instead of concurrent, then i am able to login to infoview using sap credentials but when i open a report its says you don't have enough license to perform this operation. can i know why is this happening.
                Environment:
                                       BOBJ XI 3.1, SUN SOLARIS, SAP INTEGRATION KIT.
    Thanks,
    SK.
    Edited by: Siva Vallabhaneni on May 27, 2009 3:28 PM

  • DAC 10.1.3.4.1 Server on Windows (64 bit) and Linux x86 (64 bit)?

    Hi Friends,
    Please confirm wheteher Oracle Business Intelligence Data Warehouse Administration Console 10.1.3.4.1 Server is supported on
    Windows (64 bit) and Linux x86 (64 bit)
    Because from edelivery.oracle.com i could see the downloads only for windows and Linux and not specified as 32/64 - bit
    so will it mean that the same dump is used for both 32 and 64 bit
    1) Oracle Business Intelligence Data Warehouse Administration Console 10.1.3.4.1 for Microsoft Windows (V16377-01)
    can the above dump is used for both 32 and 64 bit windows?
    2) Oracle Business Intelligence Data Warehouse Administration Console 10.1.3.4.1 for Linux x86 (V16378-01)
    can the above dump is used for both 32 and 64 bit Linux?
    The reason is because for OBIA 7.9.6.3 configuration both the Informatica Power Centre and DAC Server should co-exist
    and i could see seperate installer for 32 and 64 bit for both Windows and Linux whereas i couldn't see it for DAC Server
    Please confirm .
    Regards,
    DB

    It is supported on both platforms. With Linux however, if you have any issues you can to install in a windows environment, then copy over the folder structure. Also, you can possibly run into issues running the setup.exe on 64bit windows. When you open the install directory, go to dac/disk1/install and run the executable for win32. win64bit can return an error where it says it cannot create certain temp directories. It is a known java bug you can find in the support website.
    Edited by: user12838563 on Jul 13, 2011 11:35 PM

  • PCO on Windows 2012  64-bit server

    Hi All,
    We have MII hosted on windows 2012 64-bit server. We are planning to install latest GA version of PCo which happens to be 2.3. From the product availability matrix it seems that PCo 2.3 is not listed in the OS for it.
    I know that PCo 15 which is in ramp is compatible with windows 2012 64-bit server.
    Has anyone installed PCo 2.3 on windows 2012 64-bit server or is anyone aware when PCo 2.3 will be available for windows 2012 64-bit server.
    Regards,
    Darshan Sheth

    Hi All,
    Got confirmation from SAP through OSS message that PCO 2.3 SP04 can be hosted on Windows Server 2012.
    Regards,
    Darshan Sheth

  • IDES 4.7 Installation under Windows 2003 Enterprise Server, Xeon 64 bit

    Dear all,
    we are just trying to install IDES 4.7:
    IDES 4.7 Installation under Windows 2003 Enterprise Server, Xeon 64 bit
    But the installation break with error Message:
    Error 5 (Access is denied.) in excution of a "NetServerGetInfo" function, line (233), with parameter (saptranshost, 101).
    MOS-01224 Failed to add privileges "NetcbPrivilege SeAssignPrimaryTokenPrivile SeIncreaseQuotaPrivilege to account ....." ....
    FJs-00012 Error when excuting script....
    Any experience or help from your side?
    Thanks in advance
    HanseAtik

    Hi. First login in your server with user "sid"adm after go to START --> RUN --> CMD
    adn execute "R3trans -d"  Tell what result .
    About documentation read -->
    service.sap.com/~form/sapnet?_SHORTKEY=00200797470000065912&
    in left corner chek your release like :
    "SAP R/3 Enterprise Core 4.70 / Ext. Set 2.00 (SR1)"
    After read the document for your release, for example if you use the Oracle on WIn and R/3 Enterprise 4.7 x 2.00 SR1 -->
    Inst. Guide - R/3 Enterprise 4.7 x 2.00 SR1 on Win: Oracle 
    Regards.
    Edited by: Sergo Beradze on Mar 21, 2008 10:55 AM

Maybe you are looking for