Ower right services file in driver\etc folder using gpo

Dear All,
we require to over write services file in all pc using gpo
pls help
SUNIL PATEL SYSTEM ADMINISTRATOR

Hello,
please see about using GPP
https://technet.microsoft.com/en-us/library/cc772536.aspx or check with GPO
https://social.technet.microsoft.com/Forums/windowsserver/en-US/7419b060-7d7a-44af-9d06-d8ca838e1eea/group-policy-preferences-files-replace?forum=winserverGP
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://blogs.msmvps.com/MWeber
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Twitter:

Similar Messages

Upload file in to km folder using ETL tools

Hi Experts,
I have requirement, to upload html file in to km repository using some ETL tool. Is it possible? If not...
How i can bring a file from a different server in to portal km repository?
Regards
Baby

Hi all,
I am closing this question... since i got a better way to proceed...
In our portal we have a file system mountpoint (etc). We are able to FTP html files in to this folder through ETL scheduling...
I think this is better way, also have discussion with some of my friends... any comments..
Regards
Baby
Edited by: Baby on May 25, 2009 4:11 PM

Reading Files from client directory folder using servlets or struts.

HI All,
Could you please help me out int the below query.
I want read all files from paricular directory folder from the client machine in web application. I am able to do it from my local machine. but when I am try to do it from some other machine I am not able to get the file list.
It is very urgent ..please hep me ASAP.

It should be problem with the file permissions in your client machine ???Hardly.
@OP: a servlet executes at the server. It doesn't haved any access whatsoever to the client machine.

Find files by drive or folder?

Hi,
I have used PSE7 on XP for a while and now I have a new Windows 7 box which I am trying out PSE8 on.
My setup is that all my catalogs and media is on a separate hard drive (D:) so I have just moved the disk and am using that catalog. However since then I have realised that a few hundred (out of ~12000) pictures never got moved to the media disk and are left dotted round in various places on the old C: drive. So I want to go through on the XP box and find any files that are not on the media drive and move them to it before transferring it back to the new computer.
So, essentially my problem boils down this. How can I find files by folder or path name? I have found several different ways of searching by filename but this seems to be confined to the actual name of the file and not include the path. I have several candidate directories I want to check, and essentially anything in the catalog that is on drive C: (or in one of several candidate folders) needs to be moved but I cannot for the life of me find any way of doing this. There are many essentially useless things you can search for but I cannot believe that one of the most useful methods is really missing. I have tried on PSE8 and PSE7 with the same result.
I would be very grateful if someone could point me at how to crack this, it has already taken up several hours of searching.
Regards
Philip Coombes

In PEv.8, at top right, Display>folder location.
I just installed PEv.8 a few days ago, and now want to populate the organizer with the picture files which are in folders on the C drive. When I go to the folder view, point to C drive, the folders don't show up for me. I am using WINDOWS 7.

Creating a file in the /etc/folder?

To install MySQL I'm following the instructions on http://stringfoo.com/2007/11/05/serversetup_onleopard/
Step 8 is to write a four-line file and save it in the directory /etc/. BBEdit has a menu item for "Open Hidden" that can open files in that directory, but I'm stumped how to save a new file there. I'm logged in as a administrator. Dreamweaver can open files from that directory, but not save a new file there. The terminal can open files in that directory and I see "mkdir" for creating a directory there but I don't see a command for making a file. I searched help files but couldn't find anything.

Another easy way to save files into the "hidden" Unix folders that should work in most GUI applications...
When you're in the standard save dialog press <Command><Shift>G (just like Finder's "Go -> Go to folder..." menu item). You'll get the same "Go to folder" dialog and can just type in "/etc" to get into that folder, then save your file.
Steve

Finder - Create new files directly from a folder using finder ?

In Finder, is there a way to do a right-click in a folder and create a new file like: New Text File or New Document from that location?
I used to do this oftenly in Windows (right click, New Word document) but I have not found it in Mac OS X, any work around ?
Thanks

Try the [Apple feedback page|http://www.apple.com/feedback>. However, note that this is unlikely to be added. It would be a very cumbersome feature.
On Windows, you're almost guaranteed to be tied to a particular set of document creation tools. If you're using an office suite other than MS Office, you're so weird you might as well be using a Mac! This means that commands like "New Document" make sense there.
On a Mac, a "document" could be created with MS Word, Pages, TextEdit, NeoOffice, OpenOffice, Mellel, Nisus Writer Marinter Write, or any of a host of other programs. (Mac users tend to put less emphasis on the popular tool and prefer to use the tool that "fits the hand" best.) Further complicating things is the fact that "document" is a very generic term, since every spreadsheet is a document, every Photoshop file is a document, etc. The contextual menu would rapidly become unmanageable if it had to fill up with "New Whatever Document" commands for every app on your hard drive!
It is possible for you to add your own custom services to the contextual menu using AppleScript or Automator, and you should be able to create services to create new documents for the apps you use frequently. Check on the [AppleScript forum|http://discussions.apple.com/forum.jspa?forumID=724] for guidance on how to do this.

How to read the name of .csv file from a particular folder using Oracle.

Gurus,
I have a folder called 'data_dir' in Oracle Server and it contains 10 different .csv files and the name of the each file is being suffixed by date and time(24 hrs format).
First i need to read all the file names then i have to process those files by UTL_FILE to load the data into a relational table.
Is there any mechanism is available in Oracle to read the file names?
(In this case all the 10 different csv file names)
If so, then please help me accomplish this.
Thanks in advance.
Regards,
Venugopal.K

Is there any mechanism is available in Oracle to read the file names?Sounds to me like you need to use External Tables (*not* utl_file).
http://download.oracle.com/docs/cd/B19306_01/server.102/b14215/et_concepts.htm

[Win VC++ 6.0 ]How to get the number of files count in a folder using VC++ 6.0?

Hi all,
Can any one tell how to get the number of files(.EPS) count inside a folder when the folder path is specified in VC++ 6.0?
Thanks in Advance.
Regards
myriaz

I'm a little confused by the question, but it sounds like you're asking how to count the number of files with a particular extension in a given directory? That's not really an AI SDK question, but it's a fairly easy one to find if you google it. If you're trying to use Illustrator to do it, AI doesn't have a general purpose file API. It has a few functions to do some things that Illustrator needs, but I don't think enumerating directories is one of them.

Can I delete a file in my web folder using JSP/servlet?

I want to delete some of the files in my website. How can I give file path. I have uploaded my website in US. Just by uploading a servlet /jsp I want to delete files in my directory.
Is it possible to delete files using Servlert/jsp. What path should I give for the file name in jsp/servelet?

It is possible. You can just specify the absolute file path in a File object and then invoke the delete() method. File file = new File("/path/file.ext");
file.delete();See the File API [1] for details. Further on I think that you also want to know how to get the absolute file path for the given relative path. If so, it's available by ServletContext#getRealPath() [2]. To get for example the absolute root path, just query the relative root path "/":
String rootPath = getServletContext().getRealPath("/");[1] http://java.sun.com/j2se/1.5.0/docs/api/java/io/File.html
[2] http://java.sun.com/javaee/5/docs/api/javax/servlet/ServletContext.html

Service file under template folder missing

Hai,
We have installed ITS 6.2 in a machine. The templates folder of AGATE does not have service files like BWSP, PZ transaction.
I think after installation standard service files should be in templates folder. Correct me if i am wrong. Is there any procedure for the Basis team to publish the all the service after installation. .
Please let me know what is the procedure(or configuration) which basis has to do to publish all service files provided by SAP.
Thanks & Regards,
H.K.Hayath Basha.

Hai,
We have another ITS 6.2 server also in which the templates for the service files are under templates folder for example:
D:\Program Files\SAP\ITS\Development\Template
Under this templates we have folders with name BWSP, PZ01, PZ02...
We have another new installation of ITS 6.2 patch 26 in another machine, the folder structure is
D:\Program Files\SAP\ITS\Development\Template
Under this template folder I am not able to see folders like BWSP, PZ01, PZ02.
I am development consultant, in the previous installation I don't know what Basis did to publish the templates for BWSP, PZ01 and PZ02 under the path,
D:\Program Files\SAP\ITS\Development\Template
In the new installation my Basis team member doesn't know what the earlier team member has done to publish the templates for service files.
Please let me know what is the procedure to publish the service file as templates in ITS server.
Thanks & Regards,
H.K.Hayath Basha.
Service files in the templates folder? For sure, you can make this, but
I would recommend to use the correct folder. The structure of the ITS folders
has not been changed, as far as I know.
Another good idea: Read the documentation or use your preferred search method
for finding files like webgui.srvc

Can't save files to Last Folder Used

I'm scanning items with a Kodak iQsmart3, running under Kodak's oXYgen 2.6.1 scan application. Late last week, the application suddenly stopped saving files to the last folder used. Now I have to re-select the destination folder for each scan.
I have rebooted the computer several times, and have also re-installed the scan application, but nothing helps the problem. It seems now that the problem may be with OS 10.4.11. I've searched and searched for a solution within the OS, but can't find anything that helps.
Does anyone have a suggestion on how to proceed? Is there a place where you can check to see if the saving options can be changed?

Thanks for your suggestion. However, I did as you advised and still cannot save files to the last folder used, as I used to be able to do.
This is the first time in the 2 1/2 years I've been using this system that I've had any trouble with it. When I opened Disk Utility, it showed me the size and type of three different drives, all identical in manufacture. The first holds the Operating system, and the other two are set up in a Raid Striped set. I selected Macintosh HD under the name of the first drive, since that's the name of the disk on my desktop, and ran the Repair Permissions function, moving the recentitems.plist file to the desktop and rebooting, as per your instructions. Was that the proper area to use or should I have selected the disk description above that?
(Below is the disk information from the Disk Utility application)
Disk Description : Hitachi HDS725050KLA360 Media Total Capacity : 465.8 GB (500,107,862,016 Bytes)
Connection Bus : Serial ATA 2 Write Status : Read/Write
Connection Type : Internal S.M.A.R.T. Status : Verified
Connection ID : "Bay 1" Partition Scheme : GUID Partition Table
(Below is the information on the Macintosh HD folder of that drive.)
Mount Point : / Capacity : 465.4 GB (499,763,888,128 Bytes)
Format : Mac OS Extended (Journaled) Available : 226.2 GB (242,855,989,248 Bytes)
Owners Enabled : Yes Used : 239.3 GB (256,907,898,880 Bytes)
Number of Folders : 133,296 Number of Files : 684,567

File Adapter - how to get the file count from a folder

Hi All,
I have a requirement that have to poll a directory when the file count is reached to number N (ex:number of files avilable in folder is 5) otherwise it should wait and not pick any of the files. Is it possible to get the file count from a folder using file adapter ?? otherwise please suggest me an approach to achieve this requirement.
Thanks,
JJ

Hi Sarath,
Thank you for your reply.
Go with the list files operation of file adapter it will gives you the number of files in the specified folder as you given. . - this step is already done.
When the number of files reaches your count startup your webservice that which can polls the files. . . - how can i acheive this?? Have to poll the directory and process the number files - please let me know, what could be added to the webservice which is being invoked after cheking file count from parent process.
The reason for the above question is - we cannot use ReadFile operation in second webservice because it will be automatically triggered when the file is avilable. Also SyncRead operation supports reading one file in b/w bpel process. Kindly explain me the implementation steps.
Thanks,
JJ

I need the right download file for CS4 Design standard.

i can not install cs4 from the cd's i bought a few years ago and i can not find the right download file so i can go use again

yes i do think so the cs4 design standard
ADBESTPPCS4_LS1.dmg
STPPCS4_Cont_LS1-2
once i start the set up it lounges and asks for my serial number which i have on the back of the dvd box i got
and then i get this .... and it is the right serial number
Invalid Serial Number
The serial number you entered is not valid. Click OK to retry entering the serial number.

Unzipping files from a zipped folder

Hi,
I need unzip files stored in .zip folder using ABAP. Could you please tell me of a utility/Funtion Module or any other method which exists for the same?
Thanks a lot
Shujath

Hi Mohammed,
you just have to execute an external program from your ABAP.
For example, if the ZIP file is in the client computer you have to use the WS_EXECUTE.
Have fun
Frédéric

How do i change the access rights for every file in every sub-folder?

I have an external drive that was shared between my PC and my iMac (running Snow Leopard 10.6.5).
Some of the files created by my PC have the following access rights (privileges):
Me: Custom
staff: Custom
everyone: Custom
I want every file to have the following access rights (privileges):
Me: Read & Write
staff: Read & Write
everyone: Read & Write
I presume that I need to go into the terminal and run some command line program, but I have no idea what program or what options (or even where to look for such a program). Can someone tell me how to do this, so that every file in every sub-folder has the same access rights?

Well, that's different. Most people do not install anything on their PC to read an HFS+ disk, so I assumed it was formatted for the PC. [See my above post|http://discussions.apple.com/thread.jspa?messageID=12843313#12843313].
Note that it is the same as what you asked about, except with numbers instead of the letter equivalents.
Posix permissions are for User;Group;Other (ugo) and each one can have read/write/execute permissions. Read = 4, Write = 2, and Execute = 1. So, for rwx you set 421=7.
I try to make it safe by not typing in the file path. If you do what you posted, you will change the startup volume's permissions. The path to your external is /Volumes/ext hd mount point. If you start typing the path and accidentally hit return before finishing the full path, you could fubar something you didn't want to. So, I type the command, leave a space, and then drag the target to the Terminal window.
You might also consider the GUI based permission changing program, [BatChmod|http://www.macchampion.com/arbysoft/BatchMod/Welcome.html].
Message was edited by: Barney-15E

Ower right services file in driver\etc folder using gpo

Similar Messages

Maybe you are looking for