Owl Orphanage Photoshop exe msvcp 110 error message
I just returned from holidays and fired up my computer only to find that for some reason, photoshop cs 5.1 could not be accessed. The error message read "Owl orphanage Photoshop exe. Msvcp 110:dll System error. I used the program the night before leaving and am at a loss as to what happened. I am new to the technical stuff so any help would be appreciated.
Yes, you have plugins installed.
That error only comes from some third party plugins.
And the MSVCDP100.dll error comes specifically from Nik/Google plugins that did an auto update recently (and botched it).
Similar Messages
-
Has anyone had a problem installing PhotoKit 2.06 in CS4? I keep getting 'Owl Orphanage: Photoshop.exe Bad Image. I have tried installation files from 2 different sources without success. Pixel Genius suggested dropping the unzipped files directly into Plug-ins - that didn't work. Any suggestions would be appreciated.
Hi Peter
I am in touch with Pixel Genius, the plug-in developer, and so far ( this has been going on for 5 days) a solution has not been forthcoming, hence my post. The required files are shown in Windows Explorer but will not load when I fire up CS4. Previously, I ran version 1.2.4 of PhotoKIt without a problem but that was uninstalled to make way for the latest software. Pixel Genius have asked me to open up CS4 Help, System info, and send it to them which I have done. I wait in hope!
John -
Owl Orphanage: Photoshop.exe - Entry Point Not Found
Using Photoshop CS5 64 bit on Windows 7. New problem recently started. Whenever I try and open PSCS5 I get the following error. I then click OK and PS opens without further problem.
OWL Orphange: Photoshop.exe - Entry Point Nont Found. The procedure entry point ONPreviewLayerRelease could not be located in the dynamic link library ONImaging.dll. Any suggestions?
Thanks,
Matthew KrausDid you use their installer to install your copy of the plug-in?
This is the list of files put in place by OnOne Software's Perfect Resize on a Windows 7 x64 system for 64 bit Photoshop:
C:\Program Files\Adobe\Adobe Photoshop CS5 (64 Bit)
05/17/2011 09:40 AM 112,640 ONPSEmulator2.dll
05/17/2011 09:40 AM 869,888 onOneCoreFoundation.dll
05/17/2011 09:40 AM 505,856 ONImaging.dll
05/17/2011 09:40 AM 101,888 ONDocument2.dll
05/17/2011 09:40 AM 411,648 onOneWelcomeDialog.dll
05/17/2011 09:40 AM 250,368 OnOneWidgets.dll
05/17/2011 09:40 AM 345,088 onOneToolbox2.dll
05/17/2011 09:40 AM 1,198,080 icuuc42.dll
05/17/2011 09:40 AM 1,409,536 icuin42.dll
05/17/2011 09:40 AM 3,072 icudt42.dll
05/17/2011 09:40 AM 237,568 glut32.dll
05/17/2011 09:40 AM 147,968 ONCore2.dll
05/17/2011 09:40 AM 272,896 glut64.dll
05/17/2011 09:40 AM 350,720 onOnePR7ProEdCheck.dll
C:\Program Files\Adobe\Adobe Photoshop CS5 (64 Bit)\Plug-ins\Panels\onOne
05/17/2011 09:40 AM 233 onOne Palette Config.txt
05/17/2011 09:40 AM 4,681 onOne.jsx
05/17/2011 09:40 AM 610,989 onOne.swf
C:\Program Files\Adobe\Adobe Photoshop CS5 (64 Bit)\Plug-ins\Perfect Resize 7.0 Professional Edition.plugin
05/17/2011 09:40 AM 1,145,344 GFAutomation.8li
05/17/2011 09:40 AM 3,138,560 GFFilter.8li
05/17/2011 09:40 AM 1,470,464 GFFormat.8li
05/17/2011 09:40 AM 317,440 onOneActivationToolbox.dll
05/17/2011 09:40 AM 411,648 onOneWelcomeDialog.dll
-Noel -
Error message Owl Orphanage : Photoshop:exe-Bad Image
I am having this error with Adobe Photoshop CS5.
With reading other posts I found an answer to this same question posted - except with CS4.
It mentioned the Plug-in folder and 32 bit and 64 bit. Here is where I get confused.
I pulled plug-ins over from CS3 and put them into my CS5 plug in folder, Is that where the problem came from. How do I now clean up my mess?
I have no idea how to tell what goes with 32 bit and what goes with 64bit....You could say, I don't know my bits and you would be right. LOL
Please help. I have benn ignoring it for almost a year now.
c.sewickHere's a reference list of the original files under the plug-ins folder that came with Photoshop CS5 32 bit. Note that if you've applied the updates some of the dates/sizes may be different. But you really only need the names to know whether a file has been copied by you.
http://Noel.ProDigitalSoftware.com/temp/PhotoshopCS532BitPlugIns.zip
Let me know if you need a listing of the 64 bit files (i.e., if you're running a 64 bit Windows system).
-Noel -
"Photoshop Elements10.0.exe - Bad Image" Error message
My Photoshop Elements 10 will no longer start.
I have been running Windows on my PC since initial installation and have not changed my set-up in any way, but now receive a "Photoshop Elements10.0.exe - Bad Image" Error message when trying to start my program. The error further reads c:Program Files 9x86)\Adobe\Elements 10 Organizer\amtlib.dll is either not designed to run on Windows or it contains an error etc. I have deactivated, removed and then reinstalled Photoshop Elements using my original discs and serial number, but continue to get the same message.
Any suggestions?Hello,
Try doing a clean uninstall of the BlackBerry Desktop Software. Then reinstall it in an admin account on the PC. http://bit.ly/aMZYJL
Thank you
-DrP
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)! -
"Photoshop.exe - Bad Image" error [CS3]
Hi everyone,
I use Photoshop CS3, and every time I go to open a new document or open a saved document/picture/etc. I get a "Photoshop.exe - Bad Image" error that reads:
The application or DLL C:\WINDOWS\System32\spool\DRIVERS\W32X86\3\HPZRPP04.DLL is not a valid Windows image. Please check this against your installation diskette.
I have to "OK" this message 4 times until I am able to use the program. Any help would be greatly appreciated.
Thank you,
PeterHPZRPP04.DLL
Have you tried updating or reinstalling your HP printer? If it's a network printer, try setting up a local printer as the default printer and see if that error goes away. -
every time i tried to download an update for Photoshop, I received an error message U44M1I210. What do I have to do?
Creative Cloud Help / Error U44M1I210 | Install updates :
http://helpx.adobe.com/creative-suite/kb/error-u44m1i210-installing-updates-ccm.html -
after migration to a new macbook i cannot open photoshop. I get error message "you can't open this application "adobe photoshop cs" because powerpc applications are no longer supported"
You cannot run Photoshop CS on a new Intel-based Mac running OS X Mavericks. CS is far too old.
You'll have to buy Photoshop CS6 or Photoshop Elements 12. Or subscribe to CC. -
Cannot open Photoshop Elements. Receive error message 400 (Photoshop services are currently unavailable. Please try again later (I have) or check your network connections (they are OK). Error 400.
Photoshop.com is no longer available. The service transferred to Revel.
Ignore the sign-in altogether.
You may need to turn off Sync in Organizer prefs if you have it activated. -
My photoshop will not load, error message 148.3
my photoshop will not load, error message is 148.3
This is a licensing error. The usual fix is to reinstall the program after running the Creative Suite Cleaner Tool. also read this:
Error "Licensing has stopped working" | Windows
Error "Licensing has stopped working" | Mac OS
If you can't fix it, you will have to provide more info like system specs and what version of PS you actually use...
Mylenium -
Was able to download and install Premier but can't install Photoshop Elements - getting multiple error messages (pirated software, etc). Any ideas?
download from adobe.com or prodesigntools.com.
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 |12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.7.1| 5 | 4 | 3 | 2.7(win),2.7(mac)
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
window using the Lightroom 3 link to see those 'Important Instructions'. -
AcroMissingCompWClass Acrobat.exe Bad Image error message
Hi, I have a Windows 7 PC and InDesign, IIustrator CS4. When I try to print I get AcroMissingCompWClass Acrobat.exe Bad Image error message. Has anyone come across this?
My Acrobat 9 Pro freezes constantly. Seeing a pdf inside mutiple browser is not possible. Most of the time Acrobat 9 Pro and Acrobat Reader X starts within 5 min! As soon as I do anything, the top bar that shows "File", "Edit" etc. dissapears and averything freezes! Security software with possible firewalls I've uninstalled. Un- and re-installing Acrobat doesn't change anything. I'm using MS Windows XP, running Adobe CS4. Making any pdf's is no problem. I just can't see them. I can open a pdf inside Illustrator but that goes page by page. Any help?
-
How to stop receiving "AdobePremiereElements.exe - No Disk" error message at start-up
I upgraded from Premiere Elements 9 to 13 at Adobe. Install went without error, but each time I call up the program a window pops up entitled "AdobePremiereElements.exe - No Disk" with the following text within the window: "There is no disk in the device. Please insert a disk into drive \Drive\Harddisk1\DR1." I can eventually get this window to remove after repeated attempts, and the program seems to be running fine. Would appreciate knowing how to stop such nonsense and remove the annoyance. Thanks.
jimp
Thanks for the good news that the OldFilm.AEX file is gone and no more No Disc error message.
To update 13 to 13.1, you need to use an opened project's Help Menu/Updates.
Have you done that, and the message was that you were up to date already?
To check what version you have
Premiere Elements Editor. Help Menu/About Adobe Premiere Elements. The screen that then displays should show 13.1 if updated from 13 to 13.1.
That Help Menu/Updates location should let you take are of the Elements Organizer updating from 13 to 13.1.
Nonetheless, you can check on Elements Organizer Help Menu/Adobe Elements Organizer to assure that the screen that displays shows 13.1 instead of 13.
Any questions, please let me know.
Best wishes
ATR -
PhotoShop Elements 5.0 error messages
I have read all the problems that everyone has been having with Adobe Photoshop Elements 5.0, I also until ONE day ago have received the error message (Adobe Photoshop: Attempt to access invalid address). Yes, Adobe Support has reply that they no longer support this. SO I GUESS WHAT THEY ARE TELLING ME IS THAT I HAVE TO PURCHASE NOW Adobe Photoshop Elements 7............................
22 July 2009Can you post the exact content of the error message, including the title of the error message box? A screenshot would be best.
Ken -
Photoshop Elements 5.0 error message prevents opening entire program
Have Photoshop Elements 5.0 running for years on laptop with Windows Vista. Now won't open program and gives error message: attempt to access invalid address. Same after removing program completely and reloading from original disk. How to fix and use program once again?
Can you post the exact content of the error message, including the title of the error message box? A screenshot would be best.
Ken
Maybe you are looking for
-
Why can't i install iTunes on my win7 64 pc
Hello I want to install iTunes on my win7 64 bits pc but i always get this msg. What's wrong and why can i install it on my laptop with win vista? Frans
-
To display Last Date of the Month in Financial Reporting studio 9
Hi I want to display last date of the month in header in Financial Reporting studio 9 . Is there any function which displays the last date of the month as per user selection . for example If user select month of Jan it should display Jan 31st, 2009 I
-
Hi - I'm using ConnectSession.archiveManager to record from the web camera. While utilzing the application the quality is great. However, the playback is very choppy, the audio is not understandable, and the overall quality has degraded sharply. Is
-
Hi all, I am Using ALV grid using Object Oriented methods.I am doing some changes in my Internal table in HANDLED_DATA_CHANGED event method.But while coming out from this Screen flowlogic,the updated records were disapper in Internal table...What is
-
Do you know in java how to check if table is already create?