Own voice app does not work when using Maps-N8

I've recorded my own voice and uploaded it in Nokia Maps. Own Voice is found in the list of available languages but still after choosing it, all I get is a female chinese voice. I want to hear my own beautiful voice but how??

Have you tried deleting the voice catalogue file from the Maps folder?
Go to the File manager and browse your memory card to cities\diskcache\voices -folder, and delete voice_catalog file.
After that turn Maps application "Online" and check the voice catalogue again from Settings > Navigation.
Happy to have helped forum with a Support Ratio = 42.5

Similar Messages

  • How do I set up a mail group on mac mail?  All the advise on line seems to refer to 'address book' and I only have 'contacts'.  The guidance does not work when using 'contacts' - can anyone help me?

    How do I set up a mail group on mac mail?  All the advise on line seems to refer to 'address book' and I only have 'contacts'.  The guidance does not work when using 'contacts' - can anyone help me?

    Create a group and send mail
    http://www.dummies.com/how-to/content/how-to-create-a-basic-contact-group-in-mac -os-x-li.html
    http://www.macworld.com/article/1165582/how_to_email_groups_with_mail.html
    Best.

  • Siri does not work when used for calling a contact function

    Siri does not work when used for calling a contact function

    Very strange, try to turn off/on your iPhone. Or make a reset (home+power button)...
    If it continues try to restore it.

  • Lenovo S8-50LC Wlan(WiFi) Does not work when use Sim Cart(3G)

    Hi
    Tablet Lenovo S8-50LC
    Wlan(WiFi) Does not work when use Sim Cart(3G).
    What is the solution for this problem?
    Build Number : TABS8-50LC_S000200_150121_ROW
    SoftWarw Version : TABS8-50LC_150121

    Right, but if you have the SIM in the tablet and you put the tablet in airplane mode, does wifi work then? If so, it may be a bad SIM. Do you have another SIM you can try?

  • Tomcat does not work when using only netcfg to start network

    hello!
    for myself i wrote a script to connect automatically to a wireless network using netcfg. i do not start my network via the daemon (/etc/rc.d/network).
    i have a project and so i want to use tomcat. but it does not work correct, i can start it, but i can't connect via "localhost:8080". when i start my network using the network daemon it works! apache runs fine, but i need tomcat!
    can someone help me please?
    thx, marv

    where is "lo" enabled in the network script? i did not found it and/or i have no idea which function enables it.
    can you help me please? can i just copy the lines of code to my own script and it will enable lo?
    mfg iggy

  • WMI InvokeMethod for StartService does not work when used with ManagementOperationObserver on IIS

    Hi,
    I am using .net 4.5 and C# to remotely restart the services. I am using WMI to do this task.  This code works when called from windows application on the machine, but same code when used inside web application it gives exception of invalid parameter.
    We saw it log error in System Event log 
    The machine-default permission settings do not grant Local Activation permission for the COM Server application with CLSID
    {49BD2028-1523-11D1-AD79-00C04FD8FDFF}
     and APPID
    {49BD2028-1523-11D1-AD79-00C04FD8FDFF}
     to the user IIS APPPOOL\<app pool user> SID (S-1-5-82-634865507-143429395-1373251082-3464226226-3883016302) from address LocalHost (Using LRPC). This security
    permission can be modified using the Component Services administrative tool.
    I am pasting below code for reference.
    m.InvokeMethod(observer, "Startservice", null, null);
    //wait until invoke method is complete or 30 sec timeout
    int intCount = 0;
    while
    (!completionHandlerObj.IsComplete)
    if (intCount > 60)
    MessageBox.Show("Inside 30 seconds");
    break;
    //wait 1 sec.
    System.Threading.Thread.Sleep(1000);
    //increment counter
    intCount++;
    //see if call was successful.
    if (HandlerObj.ReturnObject.
    Properties["returnValue"].Value.ToString() == "0")
    isStarted = true;
    Dhanaji

    For web apps the context will be the context of the app pool.  Unless you set the app pool to run as a user account that has admin privileges on the remote machine then you won't be able to control the services on a remote machine.  If you have
    enabled Win auth such that the app runs in the context of the remote user then you might need to turn on delegation otherwise the hop won't work.
    Note that if you are using Win auth then consider using ServiceController instead which provides the same functionality as WMI but with a cleaner syntax.  This wouldn't work if you need to impersonate a user though.
    Michael Taylor
    http://blogs.msmvps.com/p3net

  • Interactive Report - search does not work when using custom authentication

    Apex 3.2.x
    I can authenticate fine with my custom authentication and all of my pages work okay except for one page that uses the Interactive Report feature. When I click 'Filter' then enter the column name, operation (contains, =, like, etc.) and the expression, then click the 'Apply' button, the page just re-displays and my filter information is missing?
    If I first login to Apex, select and run my application, the Interactive Report features work just fine. What's missing?

    More information:
    After login into my Apex workspace (development environment), when I display the Interactive Report and click debug I see this debug message:
    "using existing session report settings"
    When I login using my application's custom authentication and click debug I see this debug message:
    "creating session report settings as copy of public saved report"
    Based on this, it appears that my session info in not set correctly when using custom authentication... but I'm not sure what needs to be set.
    Edited by: user9108091 on Oct 22, 2010 6:44 AM

  • HT1430 For some unknown reason my Apple ID password does not work when trying to down load books from the IBook or Nook Apps.  It also has stop work when trying to down load new Apps.  Any suggestions out their???

    For some unknown reason, my Apple ID Password does not work when trying to down load IBooks, Nook books, or new Apps.  Everything else seems to work.  Any suggestions out their???

    I appreciate the info and realize that the Nook App is not related to my Apple account but this too has stopped working.  My situation first started with the Nook App not down loading and then has now spread to my IBook and new app downloads.  I have checked into my ITunes account and the ID and password are correct  and at times when I am asked to submit my Apple password such as setting up this Apple Support Community the ID and password work.  My problem seems to be just with trying to use my ID and password when wanting to download new books or apps.  I can go into the IBook, Nook, and App stores and seemingly download an item but when clicking on the new book or app nothing happens and I get a message that states it can not get into the ITunes store and it wants me to either try again or cancel.  This message appears usually ten minutes after I have tried to make a purchase.  At other times when I attempt to download a book or app I lose the screen and the IPad goes into the opening screen.  Short of redoing my Apple account or deleting an app and attempting to reload the app (but this won't work because the App store won't load new apps) I don't have a clue what to do.

  • Reply to all using ItemReply does not work when specifying messageid

    Hello everyone,
    I am trying to use the ItemReply token to perform a "Reply to All"
    action on a mail item with a known message identifier and include the
    original message text in the response. According to the documentation,
    the call should be:
    ItemReply(7;1;"message-id")
    Still, when I execute this token, apparently only a normal reply action
    is performed because only the original sender is listed as recipient.
    (The message text is properly included)
    However, when I manually select the message in the GroupWise client
    first and then execute the same call without specifying the message id,
    all recipients of the original mail are listed in "To:" as expected:
    ItemReply(7;1)
    Could it be that the "ReplyTo" parameter is ignored or does not work
    when a message id is specified as parameter? (Setting "IncludeText" to 0
    does not change anything)
    Thanks in advance and best regards,
    Peter Hofer

    Worth bumping this message. I find the exact same behaviour as mentioned 5 years ago. Using both GW8 and GW2012.
    According documentation, when MessageId is not specified it defaults to the command ItemReplyOpenItem(). I assume that the reason "Reply To all" works without a MessageID is because of that. Someone needs to give a look to ItemReply().

  • My App Store does not work when trying to update applications

    My Apo store does not work when I try to update applications that need to be updated

    There are a number of other threads from people reporting a problem with a blank Updates tab in the App Store app - it looks like there is a problem at Apple's end which they need to fix.
    Some posts are suggesting that you if you go into the Purchased tab in the App Store app you might be able to update the apps from there, though you will need to scroll through the list to find those with updates and individually update them.

  • Using Firefox (and having ZoneAlarm), when logging into my work email (Lotus Notes) through a secure Citrix program, a quesitonmark types as and accented "E". This does not happen when using IE (which I prefer not to use). I have turned off the anti-key

    Using Firefox (and having ZoneAlarm), when logging into my work email (Lotus Notes) through a secure Citrix program, a question mark types as and accented "E". This does not happen when using IE (which I prefer not to use). I have turned off the anti-keylogger in ZA (an old, and no longer successful fix). Can anyone help? I need my question marks at work.
    Thanks!
    PS. my keyboard language is not set to French.
    == This happened ==
    Every time Firefox opened
    == I tried to type a "?" in a work email using remote access.

    Perform the suggestions mentioned in the following articles:
    * [https://support.mozilla.com/en-US/kb/Template:clearCookiesCache/ Clear Cookies & Cache]
    * [[Troubleshooting extensions and themes]]
    Check and tell if its working.
    May not be related to your problem but some of your Firefox Plugins are out-dated
    * Update All your Firefox Plugins -> https://www.mozilla.org/en-US/plugincheck/
    * '''When Downloading Plugins Update setup files, Remove Checkmark from Downloading other Optional Softwares with your Plugins (e.g. Toolbars, McAfee, Google Chrome, etc.)'''

  • Youtube does not work when i am using wifi on iphone 4

    the youtube does not work when i use wifi. it works perfectly when i use 3 g network ..

    At home when i use my Wi-Fi it work normal, but as soon as i go out, for example on the bus or at work it keeps saying "Cannot connect to Youtube".

  • IPhone 5 - Voice Recognition Does Not Work

    The voice recognition does not work in any application.  When you speak you see the waveform change following your speech.  In Siri, it even recognizes when you stop speaking. In apps like Messages, the progress circle just goes around and around without stopping until you kill the app.  In Siri, the progress circle goes around and around but after a while, Siri comes on and says she can not fulfill the request and to try later.  I think I searched every possible setting.

    It is covered under warranty.  Make a Genius bar appointment.

  • I have checked the box "display date and time on the Menu Bar" and it does not work.  Using OS X Yosemite 10.10.2  Anybody have a fix?

    I have checked the box "display date and time on the Menu Bar" and it does not work.  Using OS X Yosemite 10.10.2  Anybody have a fix?

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Please take this step regardless of the results of Step 1.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

  • Dbx does not work when debugging g++ exes.

    Hi,
    We are just getting started building our application on redhat el5 with sunstudio 12.
    We are compiling and linking our app with gcc 4.1 as we need to be able to link against some 3rd party libraries build on rhel4 that we do not have source for.
    We now can compile and link fine but dbx does not work when it is fed the executable.
    We get the error
    dbx: warning: Bad transition in runtime linker interface. CONSISTENT->CONSISTENT[
    and dbx freezes.
    Note : This is built with -m32 on a 64bit kernel. Also we have not yet rebuilt all the opensource libs used on gcc 4.1 as we have a large number of them.
    Any ideas ?
    The complete output of running dbx :
    Output from dbx :
    debug /ps_rels/Dev/linux_rhel5/exe/sx
    Reading sx
    Reading ld-linux.so.2
    Reading libz.so.1
    Reading libxerces-c.so.27
    Reading libxalan-c.so.110
    Reading libxalanMsg.so.110
    Reading libsde.so
    Reading libsg.so
    Reading libpe.so
    Reading libsqlite.so.0
    Reading libsqlite3.so.0
    Reading libgeos.so.2
    Reading libpng12.so.0
    Reading libX11.so.6
    Reading libXm.so.4
    Reading libXt.so.6
    Reading libXi.so.6
    Reading libXext.so.6
    Reading libXrender.so.1
    Reading libfreetype.so.6
    Reading libexpat.so.0
    Reading libfontconfig.so.1
    Reading libcairo.so.2
    Reading libglib-2.0.so.0
    Reading libgmodule-2.0.so.0
    Reading libgobject-2.0.so.0
    Reading libgthread-2.0.so.0
    Reading libpango-1.0.so.0
    Reading libpangocairo-1.0.so.0
    Reading libpangoft2-1.0.so.0
    Reading libatk-1.0.so.0
    Reading libgtk-x11-2.0.so.0
    Reading libgdk-x11-2.0.so.0
    Reading libgdk_pixbuf-2.0.so.0
    Reading libtiff.so.3
    Reading librt.so.1
    Reading libwx_gtk2_xrc-2.8.so.0
    Reading libwx_gtk2_qa-2.8.so.0
    Reading libwx_gtk2_html-2.8.so.0
    Reading libwx_gtk2_adv-2.8.so.0
    Reading libwx_gtk2_core-2.8.so.0
    Reading libwx_base_xml-2.8.so.0
    Reading libwx_base_net-2.8.so.0
    Reading libwx_base-2.8.so.0
    Reading libboost_thread-gcc-mt-1_33_1.so.1.33.1
    Reading libboost_filesystem-gcc-mt-1_33_1.so.1.33.1
    Reading libncurses.so.5
    Reading libnsl.so.1
    Reading libdl.so.2
    Reading libACE.so.5.5.1
    Reading libpthread.so.0
    Reading libpam.so.0
    Reading libm.so.6
    Reading libc.so.6
    Reading libstdc++.so.6
    Reading libgcc_s.so.1
    Reading libicuuc.so.34
    Reading libicui18n.so.34
    Reading libstdc++.so.5
    Reading libXau.so.6
    Reading libXdmcp.so.6
    Reading libXmu.so.6
    Reading libXp.so.6
    Reading libXft.so.2
    Reading libjpeg.so.62
    Reading libSM.so.6
    Reading libICE.so.6
    Reading libexpat.so.1
    Reading libXfixes.so.3
    Reading libXrandr.so.2
    Reading libXinerama.so.1
    Reading libXcursor.so.1
    Reading libXxf86vm.so.1
    Reading libaudit.so.0
    Reading libicudata.so.34
    Reading libnss_files.so.2
    Reading libnss_dns.so.2
    Reading libresolv.so.2
    dbx: warning: Bad transition in runtime linker interface. CONSISTENT->CONSISTENT
    Reading libnss_ldap.so.2
    Reading libcom_err.so.2

    Well, this message is just a warning and should not prevent dbx from working. What exactly happens to dbx? Does it hang? Does it crash? Or it doesn't allow to run the app?
    A side note: this message says that runtime linker debugging interface reported "consistent" event w/o any "add" or "delete" events, which is at least redundant and may indicate a bug. It is possible though that the bug is in dbx as well as in ld-linux.so, but its impossible to tell without live test case.

Maybe you are looking for