Owncloud install from Apple Configurator using VPP codes?

Hi
I am trying to install the Owncloud app onto a suite of iPads using Apple Configurator. I go through the normal process of downloading the app on my macbook and then uploading the codes into Apple Configurator.
The first iPad will install the app but subsequent attempts to install on other iPads results in an error 38 "unable to redeem code with itunes store" followed by an error 0 "Click ok to confirm that you are over 17". Presumably the first app installs because I clicked ok in itunes when downloading the app so it thinks the first code I redeem is ok.
There is nowhere on the iPad or iTunes to click "ok" with the failing installs.
I have set configurator to allow all apps in preferences (I tried choosing 17+ as well with the same result).
Is there any way to force Configurator to ignore age restrictions for app installs?
Thanks

hope this helps...per Apple support doc
"If you do not already have a copy of the app on your computer, use the first redemption code in your spreadsheet to purchase it in iTunes. After using this code, re-download the spreadsheet and import it into Apple Configurator again. This allows Apple Configurator to automatically reassign this code to one of your devices."
http://support.apple.com/kb/ht5188
I have not yet tried this but I have been told by Apple engineers that it works...

Similar Messages

HT5487 Apple configurator using VPP

Hi,
Sorry if this is in the wrong section, there was no section to do with Apple Configurator or VPP at all.
I know that Apple Configurator was bought by Apple so I'm pretty sure it is ok to ask for support through this.
I have 1 dilema at the moment,
I have purchased 4 licenses for 3 different apps (4 of each to go to 4 devices).
And to import that list of codes that is on a spread sheet, in to Configurator, you must click on the 0 number, on the app in the app list, import the file, there ya go.
However... in order to get that app on your app list, you'd need to actually have downloaded the app on to the macbook.
So here is the question,
Doesn't that mean you'd need to download an extra of every single app, to put it on your macbook, which you'll never use, for the simple purpose of being able to deploy it to other devices?
I hope this has been clear, ill reply to any reponse this topic may get, as soon as possible, as long as it sends me an email to tell me someone replied.
Thank you in advance for any and all help.
Conor

hope this helps...per Apple support doc
"If you do not already have a copy of the app on your computer, use the first redemption code in your spreadsheet to purchase it in iTunes. After using this code, re-download the spreadsheet and import it into Apple Configurator again. This allows Apple Configurator to automatically reassign this code to one of your devices."
http://support.apple.com/kb/ht5188
I have not yet tried this but I have been told by Apple engineers that it works...

Apple ID code and Pwd request - Apple Configurator and VPP codes

Hallo,
I have managed 20 iPad 2 (iOS 7.1.1), supervised, with Apple configurator.
Apple give me 4 spreadsheets with redemption code (free) for keynote, number imovie, pages.
I have downloaded these apps and pushed spreadsheets with redemption codes in Apple configurator. I have prepared and supervised devices, no error and no Apple ID or Password request. All seem ok .... but, when I try to run one of these apps, a windows with blanck Appla ID and password appears. If I try to put good Apple ID and password, window disapperas and app close, without error message.
What is wrong ?
I read in web tha App Configurator must call Apple and Password if there are present app with redemption codes, but it call me nothing.
Bothing seems wrong, no error message !
Thanks
Marco

I think that you may have the answer already, contact iTunes Store Support. I see more users posting about purchasing problems with that game than I have ever seen with any other game or App since I have been participating here over two and a half years ago.
Email iTunes Store Support and seek their help.
https://expresslane.apple.com/Issues.action
If you really want to try something other than contacting support, try signing out of your ID, restart the iPad and sign into your ID again. Then try to update the information again. I do believe that you will have to contact iTunes Store Support in order to resolve this.

HT5487 So we just got a new Macbook and I also installed the apple configurator tool. I'm using it to prepare the iPads for deployment and it won't let me prepare them? It gets an error stating "retrieving iOS info from apple" then it stops and says "inte

So we just got a new Macbook and I also installed the apple configurator tool. I'm using it to prepare the iPads for deployment and it won't let me prepare them? It gets an error stating "retrieving iOS info from apple" then it stops and says "internet error". My Internet connection is fine with the Mac-book. It shows the iPad is listed under the Prepare logo up top as 1 but under supervise none are shown. Although it does show itself in iTunes. Also the profile I created is fresh and has no errors. We have tryed nearly everything I cna think of and online forums are not giving us to much info on this error.

A wag at this. A port issue?
"Apple Push Notification network setup
When MDM servers and iOS devices are behind a firewall, some network configuration may need to take place in order for the MDM service to function properly. To send notifications from an MDM server to Apple Push Notification service, TCP port 2195 needs to be open. To reach the feedback service, TCP port 2196 will need to be open as well. For devices connecting to the push service over Wi-Fi, TCP port 5223 should
be open."
http://www.google.com/url?sa=t&rct=j&q=ports%20ios%20configure%20ipad&source=web &cd=1&ved=0CC0QFjAA&url=http%3A%2F%2Fimages.apple.com%2Fipad%2Fbusiness%2Fdocs%2 FiOS_MDM.pdf&ei=5lXGUPCcJMXx0gH2wYG4BA&usg=AFQjCNFzINvs7ktT-6o6Q_l4Qk2HkpjtCA&ca d=rja
google: ports ios configure ipad
Try it on your home network where there isn't a lot of 'controls' -- network filtering , firewalls, etc.
Robert

My ibook g4 took a install from apple update . Why is it not going past the screen where is shows Mac OS X

My ibook g4 took a install from apple update . Why is it not going past the screen where is shows Mac OS X

Did you verify the hard drive before installing the update? You could have had hard drive corruption where the computer did not know where all the files are and something didn't get installed correctly.
Did you repair permissions? The installer may not have been able to overwrite a file if the permissions on files were not set correctly.
Frankly, the easiest thing will be to re-install the operating system from the installer disc. While booted to the disc make sure you run Disk Utility First Aid to repair the drive and permissions, then install. Many of us prefer to download updates from Apple rather than rely upon Software update. we use SU to tell us what we need but we download them separately.
For which operating system was this update? Apple hasn't brought out a new system update for G4s in quite a while.

I'm new to the LabView. How do I pass data from VI configured using Serial (CMTS using CLI commands to set Parameters ) to VI configured using GPIB(vector signal analyzer ) to measure such as RF frequency or power on the instrument? Thanks

I'm new to the LabView. How do I pass data from VI configured using Serial (CMTS using CLI commands to set Parameters ) to VI configured using GPIB(vector signal analyzer ) to measure such as RF frequency or power on the instrument?
I just want to set something on the front panel that will execute the Serial parameters first and then pass these settings to vector signal analyzer
Thanks
Phong

You transfer data with wires.
Frankly, I'm a little confused by your question. I can't think of any reason why you would want to pass serial parameters (i.e. baud rate, parity) to a GPIB instrument. Please explain with further detail and attach the code.

I bought iphone 5s device only from apple and used my o2 sim for sometime, now I want to use 3 sim, can I replace sim directly ?

I bought iphone 5s device only from apple and used my o2 sim for sometime, now I want to use 3 sim, can I replace the sim directly or anything Apple has to do on my device?

Yes, I bought iPhone 5s from Apple.com/uk and paid full price(no contracts, not pay as you go). From your reply I take it that it wont be locked on O2 even though my first sim used on the device was on O2. This is helpful to know, I will change it with a new sim from 3 and see (definitely will switch off while doing so). Thanks for your suggestion. After changing the sim probably in a few days time, I will confirm to you again.

HT4515 I want to buy an unlocked 4s from apple and use it permanently on a foreign CDMA cell service (IUSA Cell in Mexico). I am getting conflicting information. Thoughts?

I want to buy an unlocked 4s from apple and use it permanently on a foreign CDMA cell service (IUSA Cell in Mexico). I am getting conflicting information on whether this is possible. Apple website says the phones are unlocked for GSM use only.
I called apple when i bought an Ipad to help decide on a GSM vs CDMA version and was told that if I went to Mexico with a CDMA version of the Ipad (2) that i would call the carrier give them some numbers and they would activate it. When i returned I was to call Verizon and reactivate it in the US. I ultimately got the GSM version so i never tested the theory.
I am now thinking of getting the 4S to use in Mexico permanently but want to use it on a CDMA carrier because it is half the cost per month. But will this work? Thoughts?

There is no such thing as an unlocked CDMA iPhone. All CDMA iPhones are carrier locked and the carriers do not allow unlocking. All legitimatly unlocked iPhones are GSM only The CDMA side is completely disabled in them.
You can only use a CDMA iPhone if the carrier you want to use offers one.

Just got new hard drive installed from apple and my old password doesn't work and it won't let me change it

just got new hard drive installed from apple and my old password doesn't work and it won't let me change it.cant install anything ,pls help,thx

Camera works. Now gotta find out about this mic thing

HT201380 My Mac is relatively new and I am wondering if there is anti virus & fire wall installed from apple?

My Mac is relatively new and I am wondering if there is anti virus & fire wall installed from apple?

Regarding anti-virus software, see my Mac Malware Guide. You'll find that, for most people, the built-in defenses are more than adequate.
As for a firewall, note that the average user does not need to have a firewall enabled on their computer. See The myth of the dirty Mac.

How do i obtain permission from Apple to use Classic Visualizer in a private Youtube video? SoundSpectrum says Apple has jurisdiction over Classic Visualizer.

How do i obtain permission from Apple to use Classic Visualizer in a private Youtube video? SoundSpectrum says Apple has jurisdiction over Classic Visualizer.
SoundSpectrum says Apple has jurisdiction over this product. This is strictly for non-commercial use.

I did end up using an apple thunderbolt to DVI.
Next a DVI to HDMI.
Component Video + Digital Coaxial and Digital Optical Audio to HDMI® Converter
http:/http://www.monoprice.com/Product?c_id=101&cp_id=10114&cs_id=1011406&p_id=5 971&seq=1&format=2
After that I used an HDMI to component.
Kanex Pro HDMI to Component Converter with Audio for PS4, Xbox One, Full HD 1080p (HDRGBRL)
https://www.google.com/shopping/product/13562420314864684603?q=Kanex+Pro+HDMI+to +Component+Converter+with+Audio+for+PS4,+Xbox+One,+Full+HD+1080p+(HDRGBRL)&espv = 2&biw=1461&bih=724&bav=on.2,or.r_cp.&bvm=bv.89947451,d.cGU&ion=1&tch=1&ech=1&ps i =lcMhVcDPEpC4ogTBl4LABg.1428276117592.5&prds=paur:ClkAsKraX2IpeY7X336NKCAZO5gXZ C fr9CYkefRrD0Ad_Xy607mRERaZVy-e31nis3rQppz_OgnNmy5ApOtsfxdiNa9ObBt6XIj0T_QHJnHgQ S RKEgr403gF3BIZAFPVH73q3thgw88E5DYtSJ2ucji5lQO4ow&sa=X&ei=nMMhVfSkCIftoATK24GYCA & ved=0COEDEPMCMAA
On my iMac:
I had to go into my device settings > Display
then I set the "Optimize for:" to "CAT-6066"
after that I selected the "Scaled" option right underneath
then i selected 1080i because the Kanex Pro is designed to convert 1080i into component
I was then able to get my NewTek Tricaster 40 to recognize that component signal from the Kanex Pro and add it to my production as 1080i or as 1080p/30. The frame rate looks great and the video quality is very smooth and in real time.

HT200046 How do I delete VPP codes from Apple Configurator 1.4?

I have updated Apple Configurator to 1.4, and have "null" VPP codes. I have imported new codes from VPP, but can't delete the "null" codes. I believe the null codes are interferring with the new codes.

Hi adrienne_d,
This is a known issue (the "null" VPP codes). There's another thread addressing this:
https://discussions.apple.com/thread/5498949?start=15&tstart=30
Hope this helps point you in the right direction.
~Joe

Remove "bad" codes from Apple Configurator

Recently I was attempting to install an app onto several Supervised devices using Configurator. I ran out of codes and purchased more through the VPP system, uploaded my spreadsheet into Configurator and continued trying to install the app. Instead of redeeming the new codes however, it just hung, I left the computer running overnight in hopes that it would eventually communicate and be able to install the app. The next morning, I found things were at the same spot with Configurator attempting to redeem the code. I eventually Quit configurator to get the "multiple validation errors" message. After trying this a few dozen more times (this was during the ios7 rollover so I attributed some of the issues to that), still with no success, I re-downloaded the spreadsheet to find that codes were being redeemed, and they were appearing greyed out in Configurator, but none were installing on the iPad.
I contacted [email protected] and they refunded my additional code purchase and made all the codes I had uploaded invalid. Now I have re-purchased the additional codes I require and I have uploaded them into Configurator. Alas, the old codes are still displaying, some greyed out, and when I try to install the app, it is still hanging. When I look at the available codes in Configurator, the bad codes that are not already grey state "unable to redeem code in app store" but my iPad does not seem to be able to move on to the new "good" codes.
I want to delete the app out of configurator and try adding it back. I am not sure if doing this would wipe out the links I already have between the codes that have previously been redeemed with the iPads they are currently on. I have the original spreadsheet and the new spreadsheet with the additional "good" codes, but would hate to lose the 285 codes that are already working fine and associated with other iPads.

No. The only way is to explain your situation to Apple and request new codes.
A side note... with MDM there is no way to reuse app codes. With Apple Configurator you can unsupervise a device and get your code back on that station. But with MDM it doesn't store the code in a database like Apple Configurator does. So once the code is handed out via MDM is belongs to whatever Apple ID downloaded it.

Using apple configurator and VPP purchases,

Can you purchase 20+ apps on computer using apple configurator, but use only 10 with this group and use the rest on another computer running the configurator? I assume you would have to download again, but unclear if you can after using with config app.

Yes, there are two ways to do this.
1) just download the same spreadsheet into Configurator on two different Macs. They can have the same Apple ID or different Apple IDs. As each one installs apps, it tries the redemption codes in the list and skips over ones that have already been used.
2) Make a copy of the spreadsheet, open both in Numbers or Excel, and delete the first ten codes in one and the second ten codes in the other. Then import each into each copy of Configurator.
Remember that you'll need to use one redemption code to buy the app in iTunes for each AppleID you use, on top of the codes you need for installing the apps on devices.

Getting logs from Apple Configurator / Can't install in house app

Does anybody know how to get logs out of the Apple Configurator? I'm evaluating it for deployment of an in house app to 100 ipods. My tests are returning a simple message stating "Can't Install App" which doesn't help me at all. It would be nice to see a log of WHY it didn't install.
Thanks.

I'm guessing nobody has this working?
To get the error message look in the Console app and filter for configurator on all messages, when i try to install i get the error...
20/03/2012 21:47:12.253 [0x0-0x115115].com.apple.configurator: ERROR - 3622339ms Apply policy of UDID:84133cdf60d4f34626f13f1c7b6d5e3b4168347a failed: Error Domain=com.apple.configurator.ErrorDomain Code=5021 "Unable to install app. The application bundle does not contain a valid identifier." UserInfo=0x7fe4c4c35a60 {NSUnderlyingError=0x7fe4c4c71e40 "The application bundle does not contain a valid identifier."} (/SourceCache/AppleConfigurationUtility/AppleConfigurationUtility-90.1/Applicat ion/Controllers/CDDeviceController.m:456)
My application builds and has been signed with my Enterprise distribution cert, like others I can install this app OTA and with iTunes. I'm guessing its a bug with the Configurator app?
Nic

Owncloud install from Apple Configurator using VPP codes?

Similar Messages

Maybe you are looking for