Ownership change, how to clear out for new owner?

I need to know how to properly clear out everything on my kids Hp touchpads before they sell them? What's the best way?

Hi,
The best way is bring it back to factory settings that means the machine will be set back to the day you opening the box. Please try:
Open the launcher,
Go to the Settings tab,
To Device Info,
Touch Reset Options,
Tehn select Full Erase or Secure Full Erase (takes longer but more powerful erasing).
Regards.
click the launcher up arrow
Click on the Settings tab
Click Device Info
Click Reset Options
Click Full Erase or Secure Full Erase (takes longer but more powerful erasing)- See more at: http://datadele.com/question/how-do-you-factory-reset-hp-touchpad#sthash.uZqO1qNm.dpuf
click the launcher up arrow
Click on the Settings tab
Click Device Info
Click Reset Options
Click Full Erase or Secure Full Erase (takes longer but more powerful erasing)- See more at: http://datadele.com/question/how-do-you-factory-reset-hp-touchpad#sthash.uZqO1qNm.dpuf
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

How to prepare MacBook for new owner?

I'm selling my Intel MacBook Pro and I would like to restore it to factory-new condition for the new owner.
I know how to install OS X from the included discs, but after the installation it launches right into the first-time setup (name, registration, network configuration, etc.).
I don't want to do this setup — that's information for the new owner to key in. But I see no way to exit out of it gracefully, so should I just power down the machine at this point? I assume the next time it's started (by the new owner) it will simply try the first-time setup again.
Is there a more graceful way to exit the installation and shut down the machine without doing the first-time setup?
Thanks.

Wow, this is really great. Exactly what I was looking for, except that I'm not sure I have another volume (e.g., FireWire drive) I can boot from to delete the administrator account.
If the timing works out such that my new laptop arrives before I have to ship the old one, then I'll be all set.
Thanks.

How to add support for new file type.

Using the ESDK, I would like to add support for new file type ( a new extension). this new extension will function like any other non visual code editor but will have specific syntax highlighting, code folding and explorer.
I am trying ot figure out if I need to create a new editor or use existing JDeveloper code editor and add support for new file type. Does anyone have a high level outline on how to do this using the ESDK that is specifically targeted at adding new file type support for a text based code editor?
I have looked at the Samples and keep going in multipe directions. It would be cool if there was an example that was how add syntax higlighting for new file type.
Thank you

Brian, thank you. I looked at this extension and it answered a lot of questions for me. I was going in the right direction but needed a little help and bost of confidence, this is just what I needed. I created the LanguageSupport, LanguageModel, Addin, Node and TextDocument that are specific to the new file type. I was getting hung up on how to hook this into the JDevelpoer editor. I keep thinking I have to create a custom editor but it looks like I don't have to and it looks like I can associate this file support with the editor framwork, for version 10.1.3.2, with the following in the Addin Initilize() method.
Recognizer.mapExtensionToClass(MY_EXTENSION, MyNode.class);
CodeEditor.registerNodeType(MyNode.class, MY_EXTENSION);
LanguageModule.registerModuleForFileType(new MyLanguageModule(), MY_EXTENSION);
I have done this but still not able to recognize the new file type.
At this point, I just want to be able to recognize the new file and display it's associated icon or display a messare to the message log. I put a System.out.println("test") in the Initilize() method of my addin. then I registered MyAddin in the extension.xml. JDeveloper sees this new extension and it is loaded but I have not been able to show the test message or display the new icon when I open the new file type.
extension.xml
<?xml version="1.0" encoding="windows-1252" ?>
<extension xmlns="http://jcp.org/jsr/198/extension-manifest"
           id="teisaacs.jdev.myext.MyAddin" version="1.0.0" esdk-version="1.0"
           rsbundle-class="teisaacs.jdev.myext.resources.MyResBundle">
    <name rskey="EXTENSION_NAME">My Code Editor</name>
    <owner rskey="EXTENSION_OWNER">Me</owner>
    <dependencies>
        <import version="10.1.3">oracle.jdeveloper</import>
    </dependencies>
    <hooks>
        <jdeveloper-hook>
            <addins>
                <addin>teisaacs.jdev.myext.MyEditorAddin</addin>
            </addins>
        </jdeveloper-hook>
        <feature-hook>
            <description>My Code Editor</description>
            <optional>true</optional>
        </feature-hook>
        <document-hook>
            <documents>
                <by-suffix document-class="teisaacs.jdev.myext.model.MySourceDocument">
                    <suffix>my</suffix>
                    <suffix>MY</suffix>
                </by-suffix>
            </documents>
        </document-hook>
        <editor-hook>
            <editors>
                <editor editor-class="teisaacs.jdev.myext.editor.MyEditor">
                    <name rskey="EXTENSION_NAME">My Editor</name>
                </editor>
                <mappings>
                    <mapping document-class='teisaacs.jdev.myext.model.MySourceDocument">
                        <open-with editor-class="teisaacs.jdev.myrext.editor.MyEditor"
                                   preferred="true"/>
                        <open-with editor-class="javax.ide.editor.CodeEditor"/>
                    </mapping>
                </mappings>
            </editors>
        </editor-hook>
    </hooks>
</extension>
public class MyAddin implements Addin {
    public static final String MY_EXTENSION = "my";
    public void initialize() {
        System.out.println("MyEditor Constructor");
        new MyLanguageModule();
        Recognizer.mapExtensionToClass(MY_EXTENSION, MyNode.class);
        CodeEditor.registerNodeType(MyNode.class, MY_EXTENSION);
        LanguageModule.registerModuleForFileType(new MyLanguageModule(), MY_EXTENSION);
}I have added and removed the editor hook along with many other modificaitons to the extension.xml but still not recognizing the new file extension.
Todd

I already bought 微博会员包 but it doesnt change how can i do for that?

i already bought 微博会员包 but it doesnt change how can i do for that?

hstarkeyy wrote:
I don't want it to delete everything from my phone or old computer.
You don't need to delete anything from your phone or you old computer.
Copy the entire /Music/iTunes/ folder from old computer or backup to /Music/ on new computer.
If you cannot use the old computer or don't have a backup...
-> Recovering your iTunes library from your iPod or iOS device
Then immediately make a backup of your new computer.
Get an external drive and plug it in and use -> Time Machine

How to clear out Launchpad in Mavericks?

Does anyone know how to clear out and remove all the app icons from Launchpad in Mavericks?
Used to be able to use this code in terminal to clear it out:
sqlite3 ~/Library/Application\ Support/Dock/*.db "DELETE from apps; DELETE from groups WHERE title<>''; DELETE from items WHERE rowid>2;"; killall Dock
But it doesn't work anymore in Mavericks. Any ideas?
I don't want to actually delete anything, just remove all the icons from Launchpad because I never use Launchpad and it's annoying.
Thanks

hipdeejay wrote:
I've done that. But you press the Launchpad key and all the icons pop up.
So you simply want a blank sceen to pop up?
Don't press the Launchpad key.
Or turn the Launchpad key off.
System prefs > Keyboard - Shortcuts.
Select Launchpad & Dock and uncheck Launchpad.

Zero Balance Clearing Account for New GL

Hi SAP Gurus,
We have one unique situation for zero balance clearing account for New GL.
We have one global chart of account to which all company codes are assigned. We implemented document splitting with zero balance clearing for 1 splitting characteristics. We defined clearing account for zero balance for the same as well.
We need to post to different account only for one company code for zero balancing while other company codes will be posting to same clearing account. But as per me, we can only define one GL Account per Chart of Account for zero balancing.
Pls. suggest if you have any solution to this situation.
Regards,
Chirag

Hi,
Do you have a business rationale for this requirement? Apparently you are using the same Chart of Accounts and hence cannot assign a different GL Account.
This account will always have zero balance at GL Account level and will not be relevant to your legal reporting. A better solution would be to use the one account that all company codes can agree upon and use.

How to maintain cluisterview for new business roles in SAP CRM2007

How to maintain cluisterview for new business roles in SAP CRM2007.
Table - CRMV_UI_NB
Regards,
Biplab

I also look forward to a 'solved' answer to your question.
In the meantime, I'm curious to know if there are any organizations today running SAP B1 HANA for their production system. Would you know of any?

Change the default country code for new contacts in Outlook 2013 for countries not listed in Control Panel Region Format

Dear all,
I would like to change the default country code for new Outlook 2013 contacts. My country is Mozambique (+258) and is not listed under Control Panel> Region> Formats> Format:
Is there any place (registry maybe, anywhere) where I can manipulate the existing formats or manually add a new format to the List ??? - for example Portuguese (Mozambique).
I am using Windows 8.1
I have tried changing the country on the phone and modem options and nothing changes. Also changing the Home Location on Region> Location to Mozambique didn't change a thing. The only place where I change something and produces results is the
Format List.
Any ideias???? If not, is there a place where I can ask Microsoft to include Portuguese (Mozambique) on future windows updates???
Kind regards,
Osvaldo

Hi,
Windows uses the information set under
'Phone and Modem' in the Control Panel to determine the default area code.
You can change the country/region to
Mozambique
and set your area code here:
Regards,
Steve Fan
TechNet Community Support

Making change in original application file for new version

Hi
I am new to DMS.
I have a basic query about versioning of DIR.
I have created a DIR with status in Released.
I have attached a original application to the DIR. Now when I am creating a new version of DIR, original application file is also getting copied to the new version which is desired.
My problem is I want to make changes into original application file in new version of DIR and want to save. But I am unable to do so. It is not allowing me to change the original application file for new version which is desired for storing some ISO documents.
Is there any settings which I am missing?
Waiting for reply ASAP.
Thanks and Regards,
Niraj Sikligar

Hi
If you want to make changes in the "Release" Status, go to dc10, select Doc type and define status screen. Do not put "S" (Lock mode) for Status - Release
Also please check in new version , you are clicking on Edit symbol in Orginals tab, if u double click the file, it would open always in display mode , and it wont allow you to make any changes
Regards
Aby

How to look out for oss notes

how to look out for oss notes

OSS Note
http://www.sappoint.com/basis/.pdf
http://www.sap-img.com/basis/oss-notes.htm
http://www.sap-img.com/basis/manually-applying-the-oss-note.htm
REgards,
Santosh

Trying to figure out how to clear out the spool area for my HP printer on my 2009 IMac?

HP advised that I should clear out the spool area for my printer. How do I do this?

Hi patricia m.
I'm sorry to hear that you are encountering difficulties in clearing the spool area for your printer. It is rather "windows-centric" language as Mike indicated. I believe that HP Support would have been referring to resetting your printing system and I have included a document on how to do that.
If you find after resetting your printing system that issue hasn't been corrected, please post some additional information and I would enjoy helping you resolve things. I would need to know what model/product number of HP Printer you have, the version of Mac you are running, how the printer is connected (wireless, USB) and the issue you have encountered.
Macintosh: Resetting the Printing System in Mac OS X
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c01371980
Happytohelp01
I work on behalf of HP

How to clear out failed Execution Plans?

Hi everyone,
This should be an easy thing but I can't seem to figure out how to do it.
I created a custom execution plan and added every Financial Subject Area into the plan. Then I generated the parameters, clicked build and then ran it. The run failed.
I noticed that there was a pre-configured execution plan with "Financials_Oracle R12" and decided that what I really wanted to run was Financials_Oracle R12 and not my custom plan. So I clicked build for Financials_Oracle R12 execution plan and once that finished, I clicked "Run Now". Upon clicking run now it told me that my custom execution plan had finished with a failed status and until it completed successfully, no other plans could be ran. I really don't want my custom plan to complete successfully. I want to run the other plan instead.
How do I delete/clear out my failed run data so I can start a new execution plan?
Thanks for the help!
-Joe

In DAC under the EXECUTE window do the following:
- Navigate to the 'Current Run' tab.
- Highlight the failed execution plan.
- Right click and seleted 'Mark as completed.'
- Enter the numbers/text in the box.
Then:
- In the top toolbar select Tools --> ETL Management --> Reset Data Sources
- Enter the numbers/text in the boox.
Now you're ready to start the new execution plan.
Hope this helps.
- Austin

Roll out for new plant need some informations

Hi,
We are going to roll out for our 2nd plant. So I need your help.
I am explaining the scenario,
Current scenario is: we have two manufacturing plants (ex:-one in noida and another in gurgaon) and in both plants we have six product line (in A plant=3, in B plant=3).
For both plants we are using one Company code (1000). and we are not using the business area.
But now the problem is this, that management wants separate reporting (P&l statement and Balance sheet) Plant wise and Product wise.
We decide to create a separate co- code for 2nd plant and six business area for product lines.
(In this regards I need your suggestions that how can we define the enterprise structure)
Please tell me
1. what new configurations we need to be done for new co-code?
2. In which areas business area will be affected and how and where we will assign the business area?
3. As we are doing transaction in sap since last year and we are doing this roll out in mid of 2008 so what will be the impact on the business.
4. How we will transfer the transactional data from one co-code to another, because data of both plants lies in previous co-code(1000).
Data like:- A. Transfer of General ledger balances
          B. Transfer of open line items of General ledgers
          C. Transfer of asset and accumulated depreciation from one co code to another.
          D. Controlling transfer postings.
          E. Customer / Vendor open items and balances transfer posting. Etc
If someone knew about something more to be taken care of, please guide so that we can successfully complete the roll out.
Please advice me, its urgent. if any one can give me his mobile to make me understood i can call to him .
Thanks and regards
Kuldeep singh

if they want to a seperate P&L and B/S the why dont you make them as profit centers where you can take a P&L n B/S. at this level

How to clear out foreign divested entities at Parent Currency when have CFCTA?

We have stopped loading some entities which we divested in the prior fiscal year (2013). Now, in the current fiscal year (2014), the Retained Earning rollforward logic is carrying forward the prior year P12 ending balance. We can manually adjust out the figures in Enitity Currency in P1 of current year (July 2014) and clear out the ending RE balance, but we still have RE remaining at Parent Currency due to roll forward logic. Our journals in HFM always reverse in the next period, so it seems that we will need to forever more book an adjustment in Parent Curr Adjs to clear out the RE and the Cumulative Foreign Currency Translation amount. Has anyone had a similar issue? How did you remove all Retained Earnings at the Parent Currency levels when you got rid of a company? Thank you.

Just about every application I've seen has always had some form of rule allowing for historical translation overrides for the equity section. Some do it by allowing you to adjust the rate the equity is translated at, others do it by allowing you to enter the PC amount you want in EC in a seperate account (Dollar Overrides seems to be a common term) but either way, you'll need that functionality to accomplish this.
Basically your rules are causing the problem(prior year USD copying across to current year USD), so your rules will need to be the solution.

How to clear out old WWV_FLOW_FILES

I'm updating an application that does a file upload into wwv_flow_files and then puts the data into a collection which is maintained thru a series of forms.
The application has DELETE_ALL_COLLECTIONS to handle the clearing out of the collection and our Purge Sessions is set at a day.
The problem I see is the application doesn't have a delete for the on the WWV_Flow_Files table for the data loaded.
How can I delete the old data, or do I have to now delete the data from WWV_FLOW_FILE_OBJECTS$ for the ID's I know should be deleted?
Does the Admintrator tool have a purge on WWV_Flow_Files like the Purge Sessions?
Thanks
Edited by: spuchc on Jan 18, 2012 4:25 PM

How do I securely delete data from the machine?

Ownership change, how to clear out for new owner?

Similar Messages

Maybe you are looking for