Ows the meaning of failure code 4 showed while I tried to link to airport express?

What is the meaning of failurecode 4 showed after Itried to conect to my airport express?

Knowing that error code 4 is a connection failure will likely not tell you much...if anything...more than you already know.
Can you provide some more details on how you are trying to configure the AirPort Express?
What service will it perform on your network?
What type of computer are you using?
What operating system is the computer using?

Similar Messages

  • I'm trying to add my airport express to my network. The airport utility shows a message that its gathering info about my network then suddenly an unexpected error message appears. Why is that?

    i'm trying to add my airport express to my network. The airport utility shows a message that its gathering info about my network then suddenly an unexpected error message appears. Why is that?

    Until Bob Timmons gets back to you, first decide what you would like the Express to do. I understand you want it for AirPlay remote speakers, which you can certainly do.
    I am assuming that you are not using an Apple AirPort router; if that's not the case stop here and let me know.
    If your existing router is not an Apple AirPort Base Station, the Express:
    can "join" an existing wireless network as a client, for the sole purpose of streaming music. If that's what you want to do, do not connect it to your router with an Ethernet cable.
    can "extend" an existing wired network to serve as an additional wireless access point, which can also stream music. If that's what you want to do, connect its WAN port to an available LAN port on your router using an Ethernet cable.
    Then, "hard reset" the Express according to the instructions below, and configure it. The prompts should be self-explanatory. If you run into trouble, describe which of the above two configurations you decided upon, and the point at which you're getting the "unexpected problem".
    To "hard reset" an AirPort Base Station: make sure it's powered up, then gently press and hold its tiny reset button. Don't apply any more force than required to feel a tactile click.  Keep it depressed for five to ten seconds, long enough for its LED to flash amber rapidly. Release the reset button. Then, the LED will glow amber steadily for about a minute. Then, it will flash amber, slowly, about once every second or two, waiting for you to configure it with AirPort Utility.

  • HT4259 Trying to set up airport express to extend my wireless network. Primary base station is a time capsule. Even when I plug in the airport express to mac it cannot find it.

    Trying to set up airport express to extend my Wi-Fi network. Primary base station is a time capsule. Tried searching for airport express using Wi-Fi status, no luck. Even tried plugging airport express into iMac, still no luck. Airport express showing solid amber light. Thanks for any help.

    Airport express showing solid amber light
    Unfortunately, this can mean one of two things:
    1) The Express is locked up and will need a Factory Default Reset procedure to try to return the device back to its original default settings so that it can be reconfigured again.
    2) The Express is defective. If you cannot get the Express back to a slow, blinking amber light after a Factory Default Reset, the Express will need to be replaced.
    Try the Factory Default Reset a few times and report back on your progress.
    Resetting an AirPort Base Station or Time Capsule FAQ

  • ITunes shows time out error when trying to play on Airport Express.

    Time out error when trying to play on Airport Express. This started with an iTunes update, problems has to be with iTunes, Airport Express appears to be communicating fine, even shows when speakers are not connected.

    Same here, though on XP. Have tried cleaning registry, reinstalling, deleting preferences. Created a new user with no library and I have the problem there, too, so it's not the library.
    Is there no one to call about this??

  • What is the proper way to extend 2nd generation time capsule network to 2nd generation Airport Express?

    I have a Simultaneous Dual Band Time Capsule. Up until now, I have been extending the network with the Airport Express (2nd Gen, the 802.11n model). Since it was not simultaneous dual band, it was extending over the 2.4 GHz band so as it could extend b, g, and n and support my iPhone at 2.4 n as well as my iPad and MacBook Pro at 5 GHz.
    I just bought the new simultaneous dual band unit, which theoreticalkly should be able to extend both bands.
    Now, it is not that simple. I also run a guest network, which I assume also gets extended when WDS is on. I also still have the old Express which I have relegated to another part of the house.
    When I set up the new Express, it asked me which one of the networks I want to join, either <SSID> or <SSID 5GHz>, the automatically generated name for the the 5 GHz band on the Time Capsule. Which one do I join? How do I know that both are extended? When I connect to the <SSID 5GHz> now my iPhone can see that one and connect to it, so I am assuming it is NOT going at 5 GHz.
    And I have no idea at all what the guest network is doing....
    Does anyone have any insight into tthe proper way to configure all the units, and what I can expect? My network is as follows:
                                                                                             Airport Express (Simultaneous Dual Band)
    Cable Modem > Time Capsule (Simultaneous Dual Band) >
                                                                                             Airport Express (802.11n, last gen)
    I want to run guest network (hopefully simultaneous dual band) and personal network. I want the new express to run both bands just like the Time Capsule, and for the old express I want to know which of the two bands I am extending.
    Thank You!

    I also run a guest network, which I assume also gets extended when WDS is on
    Unfortunately, the Guest Network cannot be extended.
    When I set up the new Express, it asked me which one of the networks I want to join, either <SSID> or <SSID 5GHz>, the automatically generated name for the the 5 GHz band on the Time Capsule.
    This likely indicates that the Time Capsule has been setup to use separate names for the 5 GHz and 2.4 GHz bands, instead of the default, which uses the same wireless network name for both bands.
    In order for the AirPort Express to be able to extend both bands, the Time Capsule will need to be configured so that both bands use the same wireless network name.
    Then, configure the AirPort Express to extend the wireless network name of the Time Capsule, and it will extend both bands.  At least, that is the way an AirPort Extreme works, and I assume that the Express is the same. I don't have an Express here to test, but will in another day or two.
    The location of the Express is important, since the 5 GHz signals are not as strong as 2.4 GHz signals. You may need to experiment by placing the Express closer to the Time Capsule than normal.  With an AirPort Extreme, I find that the Extreme must be located no more than about half the distance from the main router to the area that needs more wireless coverage.
    If you continue to use the previous model Express to extend as well, it too must be configured to extend the wireless network name of the Time Capsule. Configured this way, the Express will extend the stronger of the 2.4 GHz or 5 GHz signals, so it will likely extend the 2.4 GHz band unless it is located close to the Time Capsule.
    To find out which band the previous model Express is extending, locate a Mac laptop close to the Express and hold down the option key on your Mac while you click on the AirPort icon at the top of the screen. The info displayed will indicate whether you (and the Express) are connecting using 2.4 GHz or 5 GHz.

  • Hi i would like to know how to extend the range of my time capsule wifi network(500G 802.11n) using an airport express. i have a double storey home and would like to extend range to my upstairs bedrooms.i have a time capsules network setup via a netgear a

    hi i would like to know how to extend the range of my time capsule wifi network(500G 802.11n) using an airport express. i have a double storey home and would like to extend range to my upstairs bedrooms.i have a time capsules network setup via a netgear adsl.i have a second imac upstairs which connects to time capsule wifi network (it is within range as it is directly abobe on 1st floor)
    could you tell me how best to set airport express up to extend my wifi range?

    Greetings,
    This is called an "Extended wireless network".
    Read this article for details and steps on how to extend your TimeCapsule's network:
    http://support.apple.com/kb/HT4259
    Cheers.

  • HT1515 My internet 3rd party access point in in the basement and the speakers I want to stream music to wirelessly are upstairs. Does Airport Express need to be connected to my 3rd party router via ethernet cable or will it stream music wirelessly?

    My internet 3rd party access point in in the basement and the speakers I want to stream music to wirelessly are upstairs. Does Airport Express need to be connected to my 3rd party router via ethernet cable or will it stream music wirelessly?

    Wirelessly
    Just select the option to make your AirPort Express join an existing network in the setup process

  • HT1595 I have just bought apple tv which allows me to play music through airport express but when  chose to watch a movie the audio comes from the tv and does not give option listen through other speakers served through airport express. Can you help me ?

    I have just bought apple tv which allows me to play music through airport express but when  chose to watch a movie the audio comes from the tv and does not give option listen through other speakers served through airport express. Can you help me ?

    No, you cannot seperate the audio and video stream.
    You can use optical audio to a sound system (I use sony sound bar) and play the audio via that.
    jules

  • I have tryed to connect an AirPort Express to my wireless network. But I alwais get the errocode -4. Can anybody help. I have reset the AirPort Express and updated the software.

    I have tryed to connect an AirPort Express to my wireless network. But I alwais get the errocode -4. Can anybody help. I have reset the AirPort Express and updated the software.

    The ZyXEL P-2601HN-F1, as you know, is a combination DSL modem & 802.11n wireless router (or gateway device).
    For your goal you will want to take a look at this Apple Support article for details on how to configure an AX for iTunes.
    If you are still having difficulties with the AX joining the ZyXEL's wireless network, you can try the following:
    Temporarily disable wireless encryption.
    If you are hidding the SSID, disable that feature.
    Change the Mode Select setting to: 802.11g Only
    Change the Channel Selection from "Auto" to a set channel, like 1, 6, or 11

  • HT4259 When a Netgear N 300 wireless router is the base station for my network, what steps do I take to add AirPort Express 802.11n as an network extender?

    When a Netgear N 300 wireless router is the base station for my network, what steps do I take to add AirPort Express 802.11n as an network extender?

    You don't have to do anything to the netgear.. the Express cannot wirelessly extend non-apple networks. You must plug the Express in by ethernet and create a new wireless network.. this can be the same name (SSID) and security as the netgear so it can become a roaming network.

  • Please give the meaning of this code

    Hi anyone please give the meaning of the below mentioned modify command code
      READ TABLE XKOMV INTO L_XKOMV
                  WITH KEY
                  KSCHL = 'ZGBC'.
      IF sy-subrc = 0.
        XKOMV-KINAK = 'X'.
        <b>MODIFY XKOMV TRANSPORTING KINAK WHERE KSCHL = 'ZFIK'.</b>
      ENDIF.
    Point will be sure.
    vijai

    Hello Vijaya,
    Its reading the Conditiuon table and checking for the condition type ZGBC in the document condition table. If it exists then its makeing the Condition ZFIK as in active. So   During pricing, the system ignores conditions that are valid but not active in this case ZFIK.
    Regards,
    <b>Reward Points if Useful</b>
    Sake Sharma

  • HT4060 My Ipad air  the battery is dead will not show any signs  tried all cables and correct 12w charger  any ideas?

    My Ipad air the batterry is dead and will not show any signs, tried all cables and correct 12w charger, any ideas ?

    Does you used lighning official cable ?
    If yes  :
    -Try to to wash the connector with a brush and little bit of alcohol by paying attention !
    OR
    - Restore youre iPad

  • I'm trying to stack an airport express to my extreme it shows that its part of the network but the express still flashes amber what to do please help

    I'm trying to stack a new airport express to my airport exteme to extend the range to the other side of my house on the utility it recognizes it as part of the network but the express still flashes amber. what to do please help

    Open AirPort Utility and click on the amber dot next next to the AirPort Express.
    If you see an Update button click it.
    Otherwise look at the information next to Status and click again on the smaller amber dot there. A window will open to explain why the AirPort Express is not happy along with some suggestions to remedy the "issue".

  • I keep getting an error code 6753 trying to set up airport express

    I've been trying to install the airport express with no success. I restarted, pressed the reset button and it's back to factory settings. When i try to do anything it generates an error code 6753. Any thoughts?

    Well it probably means exactly what it says... How much free space is there on your hard drive where the iTunes Media folder resides? I believe there is also an obscure bug that can occur when software doesn't read the true value of the free space properly, and the workaround is, perversely, to duplicate some content so that with less actual free space the software in question perceives it as more. I've no idea if iTunes is affected by such a bug.
    tt2

  • I'm trying to access an Airport Express via the internet using ipv6, it it possible? I get the icon under APU 5.6 but it times out getting details

    I've managed to have only an ipv6 address for an Airport Express in Spain and I cannot access it from the UK, Local pc (Windows) does not show it under Airport Utility for Windows, Airport Utility 5.6 show it here (via VPN) but will not download details.

    I have asked a moderator to provide assistance, they will post an invite on this thread.
    Once you get a reply, if you click on their name, you will see a screen like this. Click on the link as shown below.
    Please do not send them a personal message, as they may not be on duty for a long time, and your message will not be tracked properly.
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Maybe you are looking for