OWSM won't connect to ldap for authentication in policy

System: 10.1.3 on Windows with SOA Suite
I've got a web service deployed, got OWSM running, have registered the web service with a gateway component and have built a basic policy (just to log) in the Pipeline "request" and Pipeline "Response" parts of the governing policy; this basic policy works correctly. However, when I try to add an "Ldap Authenticate" step to the Pipeline "Request" part of the policy, OWSM doesn't seem to really try to connect to the LDAP. I have tried two LDAPs (Lotus Notes and OID) that are operational - I can access both of them via command line using the same credentials with which I configured the "Ldap Authenticate" step. Yet, when I invoke the web service with the "Ldap Authenticate" step configured in the policy I get the following exception:
A fault was thrown in the step Client.AuthenticationFault:Invalid username or password
I'm pretty dang sure I have entered the correct credentials in the "Ldap Authenticate" configuration (I checked it 45,000 times) - it seems that OWSM really isn't trying to connect to the LDAPs - and there's no logging that I've found that will tell me what it's really trying to do.
Anyone have any hints or know what's going on?

I have the same problem.
With the help of Vikas's instuctions for changing log level I could log the gateway's activities:
security.WSBasicCredsExtractor - Element Value:farbod
security.WSBasicCredsExtractor - Element Value:mypassword
security.WSBasicCredsExtractor - Successfully retrieved username and password
security.WSBasicCredsExtractor - Removing the UsernameToken Header
ldap.DirContextHolder - Creating new directory context
ldap.LDAPAuthenticatorStep - Failed to connect to ldap server.
I am unsure whether my LDAP settings in OWSM are correct:
my server name is nfsserver.com(OID Server) and I have this user in OID:
cn=farbod,cn=Users,dc=nfsserver,dc=com
so I think these settings should work:
LDAP host (*)      nfsserver
LDAP port (*)      389
User objectclass (*)      inetOrgPerson
LDAP baseDN (*)      cn=Users,dc=nfsserver,dc=com
LDAP adminDN (*)      cn=orcladmin,cn=Users,dc=nfsserver,dc=com
LDAP admin password      ******
LDAP admin login enabled (*)      true
Uid Attribute (*)      string      uid
User Attributes to be retrieved      uid
Is the bold part correct?
Regards
Farbod

Similar Messages

WLC connect LDAP for Authentication, but could not connect to server

Hi Everyone, I got a problem when I use WLC 5508 connect to LDAP for authentication, but no luck there, it's a simple config, but not easy to work on my job, I got the following messgae:
Service Port - Not connected
Distrubution port include:
     Management Interface - in AP Management VLAN - 30
     Student AP interface - in Student VLAN - 20
     Staff AP interface - in Staff VLAN - 10
AD is in Staff VLAN - 10
WLC LDAP Server setting
Base DN:OU=wws_ou,DC=ww,DC=yc,DC=com,DC=hk
User Attribute: sAMAccountName
User Object Type: Person
Debug aaa all enable message
*LDAP DB Task 1: Jul 09 01:40:58.969: ldapInitAndBind [1] called lcapi_init (rc = 0 - Success)
*LDAP DB Task 1: Jul 09 01:41:00.969: ldapInitAndBind [1] configured Method Anonymous lcapi_bind (rc = 1005 - LDAP bind failed)
*LDAP DB Task 1: Jul 09 01:41:00.969: ldapClose [1] called lcapi_close (rc = 0 - Success)
*LDAP DB Task 1: Jul 09 01:41:00.969: LDAP server 1 changed state to IDLE
*LDAP DB Task 1: Jul 09 01:41:00.969: LDAP server 1 changed state to RETRY
*LDAP DB Task 1: Jul 09 01:41:00.969: LDAP_OPT_REFERRALS = -1
WLC GUI Log:
*LDAP DB Task 1: Jul 09 02:56:13.045: %AAA-3-LDAP_CONNECT_SERVER_FAILED: ldap_db.c:1038 Could not connect to LDAP server 1, reason: 1005 (LDAP bind failed).
*LDAP DB Task 1: Jul 09 02:56:11.045: %AAA-3-LDAP_CONNECT_SERVER_FAILED: ldap_db.c:1038 Could not connect to LDAP server 1, reason: 1005 (LDAP bind failed).
*LDAP DB Task 1: Jul 09 02:56:09.045: %AAA-3-LDAP_CONNECT_SERVER_FAILED: ldap_db.c:1038 Could not connect to LDAP server 1, reason: 1005 (LDAP bind failed).
LDP Message of LDAP BaseDN:
Expanding base 'CN=Frankie F. Yeung,OU=wws_ou,DC=ww,DC=yc,DC=com,DC=hk'...
Result <0>: (null)
Matched DNs:
Getting 1 entries:
>> Dn: CN=Frankie F. Yeung,OU=wws_ou,DC=ww,DC=yc,DC=com,DC=hk
4> objectClass: top; person; organizationalPerson; user;
1> cn: Frankie F. Yeung;
1> sn: Yeung;
1> givenName: Frankie;
1> initials: F;
1> distinguishedName: CN=Frankie F. Yeung,OU=OU=wws_ou,DC=ww,DC=yc,DC=com,DC=hk;
1> instanceType: 0x4 = ( IT_WRITE );
1> whenCreated: 8/10/2011 10:28:14 China Standard Time China Standard Time;
1> whenChanged: 8/10/2011 10:31:26 China Standard Time China Standard Time;
1> displayName: Frankie F. Yeung;
1> uSNCreated: 3850555;
1> uSNChanged: 3850571;
1> name: Frankie F. Yeung;
1> objectGUID: 6ebfc7e9-6989-4f11-bae7-62c23af67edc;
1> userAccountControl: 0x10200 = ( UF_NORMAL_ACCOUNT | UF_DONT_EXPIRE_PASSWD );
1> badPwdCount: 0;
1> codePage: 0;
1> countryCode: 0;
1> badPasswordTime: 0;
1> lastLogoff: 0;
1> lastLogon: 0;
1> pwdLastSet: <ldp error <0x0>: cannot format time field;
1> primaryGroupID: 513;
1> objectSid: S-1-5-21-3867848445-1581729766-1247451615-2172;
1> accountExpires: <ldp error <0x0>: cannot format time field;
1> logonCount: 0;
1> sAMAccountName: fckyeung;
1> sAMAccountType: 805306368;
1> userPrincipalName: [email protected];
1> objectCategory: CN=Person,CN=Schema,CN=Configuration,OU=wws_ou,DC=ww,DC=yc,DC=com,DC=hk;
Hope I can resolve this problem ASAP, thanks!

Your AD is in the Staff Vlan so maybe the WLC uses the Staff interface instead of management to contact the AD. I don't know how you sniffed exactly.
The comment about eap methods you saw is when you use LDAP with dot1x security. It is the same as saying "You cannot do peap-mschapv2 or eap-fast-mschpv2 with LDAP".
But you can do LDAP for web authentication, that has no eap methods.
Your original problem was a binding problem from the WLC, so we can expect that the WLC really is sending traffic towards AD.

External LDAP for authentication

Hi All,
I want to use external ldap for authentication purpose with Access Manager.
I tried adding this external ldap as a secondary ldap but couldn�t succeed.
If I add this ldap in the primary ldap along with the AM�s own ldap, this also fails to authenticate users from the external ldap.
How can I achieve this?
I read many topics in this forum regarding this but none of them explain how it can be achieved.
Please suggest.
Thanks in advance.

This is what the amconsole log says:
ERROR: ConsoleServletBase.onUncaughtException
java.lang.NullPointerException
     at com.sun.identity.idm.plugins.ldapv3.LDAPv3Repo.constructFilter(LDAPv3Repo.java:3126)
     at com.sun.identity.idm.plugins.ldapv3.LDAPv3Repo.search(LDAPv3Repo.java:1996)
     at com.iplanet.am.sdk.AMDirectoryManager.search(AMDirectoryManager.java:1938)
     at com.sun.identity.idm.AMIdentityRepository.searchIdentities(AMIdentityRepository.java:221)
     at com.sun.identity.console.idm.model.EntitiesModelImpl.getEntityNames(EntitiesModelImpl.java:139)
     at com.sun.identity.console.idm.EntitiesViewBean.getEntityNames(EntitiesViewBean.java:222)
     at com.sun.identity.console.idm.EntitiesViewBean.beginDisplay(EntitiesViewBean.java:177)
     at com.iplanet.jato.taglib.UseViewBeanTag.doStartTag(UseViewBeanTag.java:149)
     at jsps.console._idm._Entities_jsp._jspService(_Entities_jsp.java:86)
     at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:107)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:908)
     at com.iplanet.ias.web.jsp.JspServlet$JspServletWrapper.service(JspServlet.java:687)
     at com.iplanet.ias.web.jsp.JspServlet.serviceJspFile(JspServlet.java:459)
     at com.iplanet.ias.web.jsp.JspServlet.service(JspServlet.java:375)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:908)
     at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:772)
     at org.apache.catalina.core.ApplicationDispatcher.doForward(ApplicationDispatcher.java:471)
     at org.apache.catalina.core.ApplicationDispatcher.forward(ApplicationDispatcher.java:382)
     at com.iplanet.jato.view.ViewBeanBase.forward(ViewBeanBase.java:340)
     at com.iplanet.jato.view.ViewBeanBase.forwardTo(ViewBeanBase.java:261)
     at com.sun.identity.console.base.AMViewBeanBase.forwardTo(AMViewBeanBase.java:133)
     at com.sun.identity.console.base.AMPrimaryMastHeadViewBean.forwardTo(AMPrimaryMastHeadViewBean.java:149)
     at com.sun.identity.console.idm.HomeViewBean.forwardTo(HomeViewBean.java:109)
     at com.sun.identity.console.realm.RealmPropertiesBase.nodeClicked(RealmPropertiesBase.java:90)
     at com.sun.web.ui.view.tabs.CCTabs.handleTabHrefRequest(CCTabs.java:129)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at com.iplanet.jato.view.command.DefaultRequestHandlingCommand.execute(DefaultRequestHandlingCommand.java:183)
     at com.iplanet.jato.view.RequestHandlingViewBase.handleRequest(RequestHandlingViewBase.java:308)
     at com.iplanet.jato.view.ViewBeanBase.dispatchInvocation(ViewBeanBase.java:802)
     at com.iplanet.jato.view.ViewBeanBase.invokeRequestHandlerInternal(ViewBeanBase.java:740)
     at com.iplanet.jato.view.ViewBeanBase.invokeRequestHandlerInternal(ViewBeanBase.java:760)
     at com.iplanet.jato.view.ViewBeanBase.invokeRequestHandler(ViewBeanBase.java:571)
     at com.iplanet.jato.ApplicationServletBase.dispatchRequest(ApplicationServletBase.java:957)
     at com.iplanet.jato.ApplicationServletBase.processRequest(ApplicationServletBase.java:615)
     at com.iplanet.jato.ApplicationServletBase.doGet(ApplicationServletBase.java:459)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:787)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:908)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:247)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:193)
     at com.sun.mobile.filter.AMLController.doFilter(AMLController.java:163)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:213)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:193)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:280)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:212)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:209)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
     at com.iplanet.ias.web.connector.nsapi.NSAPIProcessor.process(NSAPIProcessor.java:161)
     at com.iplanet.ias.web.WebContainer.service(WebContainer.java:580)

Dreamweaver ftp won't connect to host for one one site

HI,
have spent over 3 hours on this, and double checked
everything, even with ISP to make sure my host address is correct.
I can connect to the host address via other programs and ftp
I have the same settings in dreamweaver, but it won't
connect.
I can connect to other sites with this same dreamweaver, and
can create NEW connections too, but not to this one site that I can
connect to with everything else, but dreamweaver.
The is dreamweaver MX,
Can anyone help?

Adobe provides a test FTP server for these purposes. You can read about it here -
http://helpx.adobe.com/dreamweaver/kb/troubleshoot-ftp-issues-dreamweaver-cs5.html#main_Ve rify_FTP_access
Try setting up a connection to that server and see if you can connect.

AD LDAP for Authentication but ABAP or IDM for Role Assignments

Hi Portal Gurus,
Is it possible to configure the UME in such as way so that it connects to the AD for authentication purposes but uses the CUA or SAP Identity Manager for role assignments?
Thanks,
Vibhu

Hi,
Thanks for the suggestion. But ours was a different problem.
The issue was with a faulty reconciliation job that had been fixed. But it had done its damage before the fix and this caused the inconsistent behavior.
During the reconciliation job (to update changed and add new backend roles in IDM) various task trigger attributes get disabled and then re-enabled after the import. These disabled triggers did not get re-enabled for the privileges on some systems. And the reconciliation job was also delta enabled, so only new privileges, after the initial load, should have been impacted. But impact to many privileges -- all privileges of some target systems -- misled our investigation. The timing of the reconciliation job executions kind of added to the confusion and inconsistencies during the initial setup. But we finally tracked this down and wrote a custom job to fix the triggers for only the affected privileges. Assignments to all systems started to function successfully as expected.
Best regards,
Ashok

Phone won't connect to wifi saying authentication problem

My phone after being connected to sky wifi from sept 2013, has all of a sudden started hardly connecting, and always says 'authentication problem'. I have my iPad connected to the wifi too, but this has also been connecting fine since sept 2013.The connection to my phone drops a lot, and then when it is connected it is very, very slow. It doesn't drop at all on my iPad. Please can someone help me. And put it in layman terms please, thank you. EM

Two things to try. Change the wifi channel on the Sky router/Hub itself, instruction on a post at the top of this forum. And try forgetting the network on the iPhone; Settings->WiFi, and select the network ticked. Select Forget This Network and confirm it. Then reconnect to the Sky router/Hub by selecting the wifi network and entering the password again on the iPhone. Try the latter first, then change the wifi channel on the Sky Hub/router after this step. If you don't have an iPhone, then use the steps appropriate for that phone to basically do the same as above, for forgetting and reconnecting the phone to the wifi network.

AirPort Utility won't connect to AirPort for configuration

I was playing around earlier today with port mapping/static IP assignments, configuring my BitTorent client, when my AirPort network started to keep dis/reconnecting at regular intervals. I stopped what I was doing, and decided to reset the APX and start from scratch, and leave things as they were.
*The problem is, AirPort Utility often doesn't recognize the APX at all, and if it does it won't connect within the utility in order to configure the APX.*
This is strange, because after a hard reset, the AirPort icon in the menu bar shows will often connect to the now-generic, out-of-the box name Apple Network f790b07 but STILL AirPort Utility will NOT 'join network' in order to configure the APX.
HELP!

bump

Setting up LDAP for authentication to portal:default property set named "ldap

Hi
I am trying to implement the LDAP authentication to WebLogic Portal .Iam went
thru the docmentation ( http://edocs.bea.com/wlp/docs40/p13ndev/users.htm#1131824).It
mentions using the default property set named "ldap" and deploying ldapprofile.jar.My
quenstion is:
-Is there a way to look into the property using EBCC
- Apart from deploying,configuring the ldapprofile.jar,do I have to do any additional
steps in order to make my portal(say,stockportal) authenticate users from LDAP?
-If a create my own portal,should I create a similar "ldap" property set?If so,how.
Any suggestions/help is appreciated.Thanks
- Mike

Thanks Dave.
"David Anderson" <[email protected]> wrote:
You should be able to view the property set for LDAP through the EBCC
if you
have the propertysetws.jar installed in your Portal domain. This provides
the ability for the EBCC to retrieve property set information from your
server.
Dave
"mike" <[email protected]> wrote in message
news:[email protected]...
Hi Adrian
Thank you for the pointers.Much appreciate it.However,one questionstill
persists.
What is the significance of the property set "ldap" mentioned in the
document(http://edocs.bea.com/wlp/docs40/p13ndev/users.htm#1131824).Where
does this property set feature vis-a-vis setting up LDAP securityrealm;does it
mater prior to/after the setting up as mentioned in the document pointeryou just
gave .
Is it sufficinet that i follow the procedure to set up the LDAP oris
there more
to post setting,like creating a property set (similar to "ldap" orcloning
it)
apaprt frpom deploying ldapprofile.jar.
Thanks.
- Mike
"Adrian Fletcher" <[email protected]> wrote:
Mike,
The documentation that covers LDAP authentication is listed under
Weblogic
Server rather than Weblogic Portal.
See Configuring the LDAP Security Realm in Managing Security
(http://e-docs.bea.com/wls/docs61////adminguide/cnfgsec.html#1071872)
Also take a look at the FAQ - Why can't I boot WebLogic Server whenusing
the LDAP Security Realm?
(http://e-docs.bea.com/wls/docs61//faq/security.html#25833)
Hope this helps,
Sincerely,
Adrian.
Adrian Fletcher.
Senior Software Engineer,
BEA Systems, Inc.
Boulder, CO.
email: [email protected]
"mike" <[email protected]> wrote in message
news:[email protected]...
Hi
I am trying to implement the LDAP authentication to WebLogic Portal.Iam
went
thru the docmentation
http://edocs.bea.com/wlp/docs40/p13ndev/users.htm#1131824).It
mentions using the default property set named "ldap" and deployingldapprofile.jar.My
quenstion is:
-Is there a way to look into the property using EBCC
- Apart from deploying,configuring the ldapprofile.jar,do I have
to
do any
additional
steps in order to make my portal(say,stockportal) authenticate usersfrom
LDAP?
-If a create my own portal,should I create a similar "ldap" propertyset?If so,how.
Any suggestions/help is appreciated.Thanks
- Mike

Regarding SAP CUA vs Corporate LDAP for authentication purposes

Hello All:
Could anyone please give more information about SAP CUA and the corporate LDAP? Please suggest which is more advantageous and what is the cost involved in each of these. These are the options for the authentication of SAP Enterprise Portal in our system here. We want to figure out which has more advantages over the other one.
Thanks,
LBuegg

Hello all,
Appreciate your response for this query. We need to figure out the options soon. Its kind of urgent.
Thanks again..
L Buegg.

LDAP for authentication

Hey Guys,
I noticed that when a group memebership change sin LDAP, it takes some time for the changes showup on the portal. I think that the portal caches the LDAP membership and refreshes it from time to time. Does anybody what the default value is? And is there a way to chnage this frequency of refresh?
Thank You
Madhavi

Madhavi,
Default timeout is 2.5 mins(150000 ms). You can set the PageTimeout property in Page Editor.. For more information, pls take a look at the following link.
http://help.sap.com/saphelp_nw04/helpdata/en/b4/12083e7623445ae10000000a11405a/frameset.htm
In your case, you can check the par file and change the setting..
Hope, this helps
Jojo

Ios 4.2.1 won't connect to 'made for iPod' car stereo

I wish I'd NOT updated from ios 3.1.3. Then I could listen to music on my iPod (touch, 2nd gen, 8gb) in my car via the car stereo (Kenwood KDC-W6541U) USB port with not problems.
Ever since I updated to ios 4.0 (and 4.1 which didn't solve the problem either) whenever I plug my iPod the car stereo display flashes 'reading'. I've checked the Kenwood website, but there are no updates for the stereo.
I'd hoped the 4.2.1 update would've resolve the problem, but it didn't. The main reason I'd bought an iPod was to listen music in the car!
Recently I've not bought anything from iTunes, whats the point as I can't listen to it.
I'm getting disillusioned. I've tried plugging/unplugging, switching on/off, resetting, etc, etc with no success. Anyone got any ideas?
Apple, get this sorted, please! ios 3.1.3 worked fine.

I HAVE THE SAME PROBLEM. i have a kenwood kvt-514 head unit. once i updated my ipod touch to v4.2.1 some songs didn't play, no album artwork was displayed, ect. i tried doing all of the above and nothing. hopefully apple is working this out.

Xbox Controller (Wired) won't connect to PC for gaming. Please Help!

So, I bought Dark Souls and I would like to use my Xbox controller. I acquired the drives necessary and had it automatically download the other drives once plugged into my computer, but the Microsoft Xbox 360 Accessories Status does not recognize that the
controller is plugged in there for it does not let me play using the controller. It, also, does not pop up saying that a joy stick controller is plugged in when I go to joy.cpl through Run.
Can someone please tell me what is wrong or what I could do to fix this? I have uninstalled the drivers multiple times and reinstalled and that has not worked either. I really want to start playing Dark Souls!

Hi,
Have you tried reinstalling Windows software for Xbox 360 controller?
http://support.xbox.com/en-US/xbox-on-other-devices/windows/xbox-controller-for-windows-setup#88e4f84c93ca4c8c9e0e22da6d5a37a6
Andy Altmann
TechNet Community Support

Retrieve parameters from LDAP using authentication module

I have existing LDAP that contains organization people and their attributes. I have several web applications that use existing LDAP for authentication and authorization. My goal is to deploy single sign-on with openSSO so that users are authenticated against existing LDAP. Changing of the existing LDAP is forbidden.
I deployed newest stable OpenSSO and Apache2 + newest policy agents to web service servers.
OpenSSO server uses LDAP authentication module to authenticate users against existing LDAP. It uses flat file data repository and realm attributes -> user profile is ignored.
This basic setup works fine. The next step is to integrate existing web applications to single sign-on system. The authentication part works fine. I just disabled old mechanism from web applications that did the LDAP authentication. OpenSSO and Apache Policy agent are handling that part.
The existing web applications are still querying existing LDAP other attributes there than uid and userpassword. Is it possible to configure OpenSSO to forward LDAP attributes to web application as cookie or header value? Or is the forwarding feature only for attributes in Data Store?
If the forwarding is not possible what is the next best alternative ?

OpenSSO forum is quite silent so I'm back with you guys.
I managed to solve the agent error log problem I mentioned before. The problem was about nonexisting attributes in AMAgent.properties com.sun.am.policy.agents.config.profile.attribute.map. I removed extra attributes and the authentication against LDAP started to work again.
The problem is that no attributes are forwarded from LDAP to web application. I have tried HTTP_COOKIE and HTTP_HEADER settings in AMAgent.properties and com.sun.am.policy.agents.config.profile.attribute.map is set to cn|common-name,mail|email.
My LDAP looks like this:
# testuser, pollo.fi
dn: cn=testuser,dc=pollo,dc=fi
cn: testuser
objectClass: organizationalPerson
objectClass: inetOrgPerson
givenName: Test
sn: User
ou: People
uid: testuser
mail: [email protected]
And my datastore configuration:
LDAP server->localhost:389
LDAP bind DN->cn=admin,dc=pollo,dc=fi
LDAP organization DN->dc=pollo,dc=fi
Attribute name mapping->empty
LDAP3 Plugin supported types and operations->agent,group,realm,user all read,create,edit,delete
LDAP3 Plugin search scope->scope_sub
LDAP Users Search Attribute->uid
LDAP Users Search Filter->(objectclass=inetorgperson)
LDAP User Object Class->organizationalPerson
LDAP User Attributes->uid, userpassword
Create User Attribute Mapping->empty
Attribute Name of User Status->inetuserstatus
User Status Active Value->Active
User Status Inactive Value->inactive
LDAP Groups Search Attribute->cn
LDAP Groups Search Filter->(objectclass=groupOfUniqueNames)
LDAP Groups container Naming Attribute->ou
LDAP Groups Container Value->groups
LDAP Groups Object Class->top
LDAP Groups Attributes->cn,description,dn,objectclass
Attribute Name for Group Membership->empty
Attribute Name of Unqiue Member->uniqueMember
Attribute Name of Group Member URL->memberUrl
LDAP People Container Naming Attribute->ou
LDAP People Container Value->people
LDAP Agents Search Attribute->uid
LDAP Agents Container Naming Attribute->ou
LDAP Agents Container Value->agents
LDAP Agents Search Filter->(objectClass=sunIdentityServerDevice)
LDAP Agents Object Class->sunIdentityServerDevice,top
LDAP Agents Attributes->empty
Identity Types That Can Be Authenticated->Agent,User
Authentication Naming Attribute->uid
Persistent Search Base DN->dc=pollo,dc=fi
Persistent Search Filter->(objectclass=*)
Persistent Search Maximum Idle Time Before Restart->0
Should I enable some setting still to get the forwarding going on? Any ideas for debugging?

Won't connect???

i am a web student. i didn't have any problems with the player connecting until my Actionscript 3.0. class. the issue starting when i try to debug in flash builder 4.5. i am not sure what happened but now i always have an issue trying to connect. it doesn't matter where i'm trying to connect from. one of three things will happen:
if i'm lucky, i'll connect without any issues
if i don't connect, either i get this pop-up
or i get this one
(sometimes the error is different, but it is mostly this one)
the first pop-up i showed is the one i get most often. it doesn't matter which option i choose, localhost or other machine, it won't connect. if for some reason it's not the first pop-up, then it's the second. different pop-up, same result, i'm still unable to connect. i have to restart the browser and hope it works the next time. sometimes i have to restart it more than once, but normally one time will get it going. even when i finally get it to connect, i'm still unable to debug my flex builder aps. the ideal situation for me is to have the normal flash player for firefox and the debug version for chrome (which is where i normally run my flex builder aps). but at this particular moment i just need something to work consistently. i need to be able to debug so i can complete my assignments for school. i am already weeks behind b/c of it and i don't know how much more understanding my instructor will be. i started out on the flash builder forums, but no one was able to assist me. i have the latest version of firefox, chrome, opera, safari and ie installed. (i don't care which one i have to use to make it work, if it comes down to that) i am running windows 7 64bit. can someone.............anyone, please help?

i've already tried the flash builder forum without any luck. i'll give actionscript a try. do you have any other suggestions if they can't help?

My airport express and utility won't connect....

I'm receiving errors when trying to connect either Airfoil or Aiport Utility.
Airfoil keeps telling me that I need to turn it on.
Aiport Utility recognizes that the express it there but yet won't connect in order for me to configure. It gives me the error message "Make Sure your Apple Wi-Fi base station is plugged in and in range of your computer or connected via Ethernet and try again. (-6753)"
I've restarted the Express, I've hard reset it. I've reinstalled the Airport Utility and still no luck. I've even tried connecting through itunes and it won't connect. Itunes recognizes that my express is there it just won't connect.
I've upgraded the aiport utility to 5.5.3 and the Airport Express to 7.6.
Is anyone experiencing this problem and if so, have you resolved it? After doing extensive searches online it doesn't seem that anyone has figured this out and possibly a problem with the firmware!
Let me know please!
Andrew

That page won't load for me. Any suggestions?
You can find it here:
http://discussions.apple.com/thread.jspa?messageID=1113575
There was a change in the forum software which means that the previous link is now dead, but the message is still available.
iFelix

OWSM won't connect to ldap for authentication in policy

Similar Messages

Maybe you are looking for