Owsstat doesn't work (all else does, i think)

Hello.
I've got OAS 4.0.81 running on Mandrake 7.1 fine, the following occurs though:
[oasman@thor oasman]$ owsstat
owsstat: error in loading shared libraries: /oracle/oas/oas4081/lib/liboasclntsh.so: undefined symbol: slpmprodstab
any ideas? otherwise OAS works fine apart from difficulties using apache listener....

Will the Application Image Capture in your Applications Folder find the scanner?
...and have you got the latest drivers from the Apple support site: HP Printer Drivers v.2.8 OS X

Similar Messages

HT4259 I have been trying for hours to extend my Extreme Gen 5 network with an Express Gen 2. But no matter what I do or try, it doesn't work. What does happen is my internet gets block somehow when the Express looks like it's set up and 'green' - no in

I have been trying for hours to extend my Extreme Gen 5 network with an Express Gen 2. But no matter what I do or try, it doesn't work. What does happen is my internet gets blocked somehow when the Express is online and looks like it's set up perfect and 'green' - but no internet connection for anything even though the Extreme is green and the modem is good. Once I disconnect the Express, everything is good again.
I've tried LAN, WAN, though a switch, direct connect, Extreme set to Extend the network, the Express set to be an extension. Most of the time I get an error trying to update the Express. But when it seems to be set up perfect, the entire house can't get to the internet. Just when it looks right, it is so wrong.
If anyone can give me exact steps (e.g., "...from the Base Station menu, select the Restore Default Setting option" vice "...just restore the defaults..."), I would greatly appreciate it. I'm left to the conclusion that the Express is faulty. I've been using Airport Utility 6.2 from Mountain Lion on one computer and Airport Utility 5.6.1 from Snow Leopard on another computer (the latter give more control while the former just want you to 'forget' the Express).

I finally got it working. I was trying to set it up ethernet. My biggest mistake was when the new Express came on, I did not select 'Continue' - I went straight to manual thinking that I would get the most setup options in manual mode. So everything I initially tried always resulted in 'wireless'. Even when I would update or restore default settings, the Express would not completely restart. Or sometimes I would get an error. So most of the time I had to unplug it. So when it came back up, none of my changes were retained. But there were a lot of times when everything was green and appeared to be fine. But anytime the ethernet cable was plugged in, no more internet.
So here's the weird part. When I finally tried 'continue' (vice manual), I would get 4 options. One would be 'ethernet' extended. So I would select it, it gave me green lights, all looked good, and still the same problem. This is when I got frustrated. I thought I had exhausted all possible combinations.
But somehow when trying continue again after another restore, I only got 3 options. One was the same ethernet extended option (can't remember what the missing 4th one was). And this time it worked - it gave me the big green circle with the checkmark saying it was successful. I don't know what I did different, but I know now that it won't work if 4 options come up to choose from. It will work if only 3 options come up. And success if only verified by the big checkmark. Had anyone anywhere said the checkmark declaring success is validation, then maybe I wouldn't have gone down so many rabbit holes thinking it should have been successful.
As for which Airport Utility I prefer, 6.2 looks nice, but it would just ignore the Express and would want me to 'forget' it and would not let me edit it. Airport Utility 5.6.1 was the one that I ended up using the most and finally had success with. It still strikes me as odd that there is no manually way to pick ethernet, it can only be choosen following a 'restore defaults', and only from the 3-option list (the 4-option list had the same ethernet choice, but it no worky).
Thanks for the response. I really do appreciate it.
Aiport Extreme Gen5 - internet access and router
Airport Express Gen2 - connected via ethernet, extending my wireless
- configured while connect directly to the Extreme, but now on a switch (16-port hub)
Using Airport 5.6.1
1) Restore Defaults from Base Station menu
2) Following restart, Select Continue
3) Of the 3 option presented, select 'ethernet.... extend network...'
- if 4 options are present, may not work
4) Wait for the green circle with the big white checkmark.
5) Connected Express to the switch where a cable went to other end of house - works.
Dead-zone went from 2mbps to 24mbps.
I probably spent 4 hours chasing my tail in anger. The correct way took about 5 minutes total.
Thanks again.

I have installed the new iOS 5 on my Iphone 3GS and my bluetooth connection doesn't work anymore. Does anybody have a solution?

I have installed the new iOS 5 on my Iphone 3GS and my bluetooth connection for my Philips bluetooth headset doesn't work anymore. Does anybody have a solution?
I have checked the headset on another Iphone with iOS 4 and it works well.
Thanks for your help!
Pierre (from Paris - France)

Bonjour Pierre,
there seems to be a bug in iOS5 with regards to Bluetooth. THere are a lot of threads in here on this. We're all waiting for Apple to fix this...

Safari show all tabs doesn't work all the time

It is annoying: safari show all tabs doesn't work all the time. The little icon to the right of the "New Tab" area sometimes works, and sometimes doesn't. The Shift Command Back-slash, sometimes works, and sometimes doesn't. I find no rhyme nor reason for this. I have a MacBook Pro, Mountain Lion, the latest updates. It doesn't matter if I am in Full Screen or not.
I am quite confused regarding this.

Open the Finder. From the Finder menu bar click Go > Go to Folder
Type of copy paste the following:
~/Library/Caches/com.apple.Safari/Cache.db
Click Go then move the Cache.db file to the Trash.
Quit and relaunch Safari to test.
If that helped, empty the cache more often from your keyboard.
Command + Option + E

Airplay mirroring on Mac Mini (late 2012) doesn't work, extended display does...

Airplay mirroring on Mac Mini (late 2012) doesn't work, extended display does... What's going wrong here?
Details: OS X Yosemite 10.10
Apple TV 3rd generation, version 7.0
Switching Airplay on on Mac Mini works. It goes automatically on extended display mode. Switching to mirroring works for about 1 sec and then it switches back to extended display mode. On my tv screen i see my second desktop. Funny detail: it has the desktop background i used previously. Another funny detail: I had exactly the same problem when i used the previous versions of OS X and the Apple TV software...
Who can help, please!

I also have been having problems with Airplay on my 2014 Mac Mini see Mac Mini 2014 Airplay Display Disconnect Bug?
I"ve also noticed that my Apple TV (3rd Gen) does not appear in the iTunes Airplay list on my Mac Mini whereas it does on my MacBook.
I've booked a call with Apple Support for next Sunday to discuss the issue.
If I get any useful info I will pass it on.

HT4352 I have turned home share on my iPhone and my Apple TV and the remote app doesn't work all of the sudden. How can I fix this?

I have turned home share on my iPhone and my Apple TV and the remote app doesn't work all of the sudden. How can I fix this?

Welcome to the Apple Community.
Have you updated to the latest version of the Remote App.

I have Iphone 4 it was work fine in my country (bahrain) i went to UK and i change sim card to O2 and when i came back it doesn't work in my country i think because i update the carrier in Uk its my carrier now 10.0 and the others in my country is 9.0

I have Iphone 4 it was work fine in my country (bahrain) i went to UK and i change sim card to O2 and when i came back it doesn't work in my country i think because i update the carrier in Uk its my carrier now 10.0 and the others in my country is 9.0

We had the same problem, but figure out the solution.
You MUST have at least 1 song added to your ITUNE! After you add a free song, then everything else should work as normal!
Hope this helps!

FullScreen script doesn't work all the time

I am having a problem with this script. Its weird, sometimes I type in a number like 3333 and it will go to the google link like this:
http://www.google.com/maps?saddr=3333&daddr=40.000000,80.000000
Other times I type in the same number and it doesn't work.
Anyone see any problems with the code?
echo "<script language=\"Javascript\">

</script>";
echo '<form name="addr_form" id="addr_form">
<b>Get Directions</b>
<br>
<font size=2>Your address: (street, town, state)</font><br>
<input type="text" size=40 maxlength=40 name="saddr" id="saddr" value="" />
<input type="button" type="submit" onClick="call_full()" value="Go">
<input type="hidden" name="daddr" value="40.00000, -80.00000"/>
</form>';Message was edited by:
[email protected]

The main problem I see is that it's written in Javascript, and this is a forum about Java, not about Javascript.
I can tell you that in Java there's a method available to URL-encode URL parameter values. For all I know there's one in Javascript too. There should be, in my opinion, but not knowing the language very well I couldn't tell you if there really is one.

Why does search option in history doesn't work? It does not display any sites I've been to.

I enter history, type a name of a site I've been to in 'search' or 'find' field (I'm using polish version so I don't know the exact name of that field) and it does not find anything. I haven't cleared my history, it's all there when I open 'today', 'yesterday' etc. tabs. Only finding it using search option doesn't work.
It used to work fine now it doesn't. I haven't installed anything.

Make sure that you're not running Firefox in Private Browsing mode.
https://support.mozilla.com/kb/Private+Browsing
You enter Private Browsing mode if you select:
Tools > Options > Privacy > History: Firefox will: "Never Remember History"
To see all History and Cookie settings, choose:
Tools > Options > Privacy
choose the setting Firefox will: Use custom settings for history. Deselect:
[ ] "Permanent Private Browsing mode"

Junk mail filter doesn't work all the time

Why doesn't the Junk mail filter work all the time? I click on mail like from Best Buy or Omni Hotels to go into junk mail but hardly any of their mail goes into Junk. Other sites go directly to Junk. If I click on a Best Buy mail to indicate it's Junk, shouldn't that work 100% of the time forever and ever?

The Junk filter is based on an analysis of the content of the message. It ignores the sender. (Filtering based on the sender is an ineffective way of dealing with true spam, since spammers use constantly-changing spoofed addresses.)
If you don't want mail from a legitimate sender like Best Buy, unsubscribe from their ads. If that doesn't work, make a Rule to delete or move the messages.

Control center doesn't work all the time in iOS 8

I have the new iPhone 6+ and have noticed that sometimes I can't pull up control center.
I have to unlock it, then lock it again and then it will pull up. I use this method to access the torch at night.
Also to switch off the torch when the phone is locked, the camera icon could be tapped. However this feature doesn't work anymore.
Now I have to click the home button > swipe up the control center (hopefully it works) > tap the torch icon.
It used to be easier when you could just click the home button > tap the camera icon.
Please fix these issues soon.

You are not addressing Apple here, we are users like you, so we cannot fix these issues. If you would like to tell Apple what your problem is, then you can leave them feedback HERE. Click on the appropriate link.
However, if you want to try and troubleshoot your Control Center issue, then I would go into Settings>Control Center>Access on Lock Screen and if that is on, turn it off and back on again. Also, when accessing Control Center from the lock screen, make sure you are starting off of the screen when you begin to swipe upwards. That tends to work better. Sometimes starting on the screen, the finger does not get low enough for it to register.
As far as the flashlight button, I never attempted to turn it off with the camera, I just tapped in Control Center.

Newest version Flash Player doesn't work online, but does work when using Dreamweaver files locally?

Newest version Flash Player v 11.2.202.235 doesn't work when trying to view Flash video online, but does work when using the same Dreamweaver files locally?
Win7/64, Firefox 12, 16 gb ram, core i3 @3.07GHz

Define "doesn't work" - what do you see instead of the expected Flash content?
Does that happen for any Flash object on the Internet, or only your Dreamweaver files?

Job doesn't work - but procedure does

Hi all,
I found some curious - for me.
I added a job for a procedure. The procedure contains 3 execute immediate with create table statements. The tables will be created on the current database, where the procedure runs. But the third statement select the datas from my table from another database (normal: select * from mytable ; 3.: select * from mytable@SERVER3). The 2 servers have a connection.
And now the curious:
If I start then procedure everything runs without errors or warnings. All tables will be created.
If I start the job manually (I use TOAD for Oracel: Execute this job immediately) it also runs fine.
But if the job starts automatically, the two select runs normaly, but the third doesn't. It must be in connection with the other database. Until now no admin here could help me or could say me how to solve the problem.
Now I hope that someone in these forum knows the problem and could help me.
Regards
Juergen

Hi,
I can't create a dblink - insufficient privileges. But our Admin created on. But it didn't worked. I mean, we had the same problems as before.
But I have a problem with the scheduler - which should solve the problem also. The folowing doesn't work:
declare
begin
dbms_scheduler.create_job (
job_name => 'tj_new_job',
job_type => 'PLSQL-BLOCK',
job_action => 'name_of_procedure',
start_date => sysdate,
repeat_interval => 'freq=dailiy;byhour=4');
end;
The problem is, nothing will happen. Is there anybody who knows, what I did wrong?
Thank you.

The shipped HDD doesn't work anywhere else!

Hi everyone,
I have HP ProBook 4520s, it's shipped with hdd of model: ST9500420AS (Seagate Momentus 500GB 7200.4 RPM).
Now, I replaced it with another hdd (doesn't matter what it is), and I wanted to mount the old one (mentioned above) in an enlosure... but, it doesn't work properly (actually, doesn't work !) only the "installing new hardware" icon appears and takes a while to complete and then no partitions are loaded into the computer.
Checking the computer management shows that the hdd is connected but appears as RAW disk with no partitions in it, and asks me to "Initialize" the hdd, when order to initialize as MBR, an I/O error returns:
"The request could not be performed because of an I/O device error."
re-mount it in the laptop directly, it works with no problems.
By the way, The enlosure works with the other hdd with no problem.
I mounted the momentus ST9500420AS hdd in a desktop pc, the same problem appear (like when mounted in the enclosure).
I googled for some solutions, at last, I may say that this hdd is locked for the laptop and can't work in other devices without doing something to it!
Please, anyone knows what to do tell me the way I should take to solve this problem, it's 500 gb hdd and I don't want to loss it
Thank you in advance.

Thanks Mike, have already tried that weeks ago, even got a whole new router, nothing seems to do the trick. Besides, every other computer works just fine with both old or new router... I just erased the entire macbook and reloaded the OS from scratch, perhaps something had been corrupted. It still won't pick up signal unless standing a few feet from router, but it will maintain the signal a bit better once it's picking it up. It's still not right, however...used to work just fine.

When using irssi in Terminal, backspace doesn't work, forward delete does

When using irssi (the command line IRC client) in 'screen' over SSH on Terminal.app, backspace (delete) doesn't work. I have to use forward delete (in my case, fn+delete). Is there any way to enable backspace delete?

I should also add that I saw instructions on how to fix this for OS X Tiger, but Terminal.app in Leopard seems to have changed.
http://jeremy.zawodny.com/blog/archives/000299.html
{quote}
"If you're on a Macbook Pro laptop, and using irssi with screen on a remote machine via ssh...
If your backspace key is acting as a 'delete'-key in irssi in screen, Hit command+I, in terminal to bring up your window preferences, under the Keyboard settings, tick 'Delete key sends backspace' - that should fix that."
{quote}
The problem is that Leopard's Terminal doesn't have a "Delete key sends backspace" option to toggle. Does anyone know where I can find this?

Owsstat doesn't work (all else does, i think)

Similar Messages

Maybe you are looking for