Ox s lion reinstall now can't connect to Internet

Reinstalled os x lion once finished I was no longer able to connect to the Internet! click on safari icon warning comes up immediately saying safari quit unexpectedly.  Click reopen to open application again. And it just brings up another warning box??

What version of Safari do you have? Are you able to access, for instance, your email accounts? Or is the problem just Safari?
Clinton

Similar Messages

  • I have 2nd generation apple tv, and this has always worked well with Lion, have now upgraded to Mountain Lion, and now can not connect to itunes, all other things work, can buy or rent films.

    I have 2nd generation apple tv, and this has always worked well with Lion, have now upgraded to Mountain Lion, and now can not connect to itunes, all other things work, can buy or rent films, but can not listen to my music or show photos. Can anybody help please?

    I have 2nd generation apple tv, and this has always worked well with Lion, have now upgraded to Mountain Lion, and now can not connect to itunes, all other things work, can buy or rent films, but can not listen to my music or show photos. Can anybody help please?

  • HT5304 Hi Guys, I'm running snow leopard 10.6.3  recently had update which left me with a DMSL launch problem. Rei installed software and now can't connect to Internet  with cable or wifi ! can see network and router,. Help

    Hi Guys, I'm running snow leopard 10.6.3  recently had update which left me with a DMSL launch problem. Re installed software and now can't connect to Internet  with cable or wifi ! can see network and router. Have tried many things and now pulling my hair out !  

    recently had update
    Care to share which update?
    Have tried many things
    Care to share?
    Please detail ALL you have done so far in the way of troubleshooting?   Need this info to avoid the been there done that scenarios.

  • Just upgraded iPhone 4 from 4.2 ios to 6.1.3 ios now can't connect to internet

    I just updated my friend's iPhone 4 from 4.2 ios to 6.1.3 ios  --  she had not updated it since she purchased it.  The uploads installed fine but now she can't access safari/internet and can't send pictures via text message.  She is strictly 3g with no wireless access at her home.  Could this be caused by the software upgrade?  If not, how/where do I start looking for the problem.
    Any help will be greatly appreciated.
    chuswysly♥

    Hi chuswysly,
    If your friend if having trouble connecting to her cellular network, the steps below might help:
    iPhone: Troubleshooting a cellular data connection
    Resolution
    Follow the instructions below for assistance with troubleshooting cellular data issues on your iPhone. After performing each step, please test to see if the issue is resolved.
    Toggle cellular data off and then on again on the iPhone: Tap Settings > General > Cellular.
    Restart your iPhone.
    Check for a carrier settings update.
    Update your iPhone.
    Remove the SIM Card and reinsert it. Allow the iPhone to reaquire the network.
    If your SIM card has SIM PIN enabled, try toggling it off: Tap Settings > Phone > SIM PIN.
    Try another location. If a different location works, but the original location still does not, contact your carrier to report the issue.
    Reset network settings: Tap Settings > General > Reset > Reset Network Settings.
    Restore the iPhone as new.
    Contact your carrier to verify that the iPhone is properly set up on the account with the appropriate, current data plan. If you are traveling internationally, you may need to turn data roaming on: Tap Settings > General > Cellular. Check with your carrier first to understand the cost of international data roaming. Also, see this article.
    Note: If your carrier does not appear in this list, verify with your carrier that you are using the correct cellular data settings.
    If none of the above steps resolves the issue, contact your carrier, make an appointment at an Apple Retail Store, or contact AppleCare to troubleshoot further.
    Hope this helps ...
    - Judy

  • T41 re-installed Windows XP, now can't connect to Internet

    I recently re-installed windows XP, but now I can not connect to the internet. I downloaded an Ethernet Intel Pro driver, however when following the steps to complete installation, I do not have any options under "Network Controllers" it says this driver is not found.
    Can someone please advise what drivers need to be installed in order to connect to the internet again via ethernet and wireless?

    recently had update
    Care to share which update?
    Have tried many things
    Care to share?
    Please detail ALL you have done so far in the way of troubleshooting?   Need this info to avoid the been there done that scenarios.

  • Formated macbook and now can't connect to internet

    Hello people,
    I just formated my whole macbook because the windows version I installed on it wasn't working well and was actually slowing the mac.
    I remade my disk one ( only 1 partition ), installed everything, but now I can't connect anymore with my ethernet cable. I try to plug it in my normal Computer next to it and internet works. It just only doesn't work with the macbook. It's very strange because before I formated it, everything was working well.
    It cannot find the IP address alone and doesn't recognize the internet.
    Anyone got an idea?
    Thank you very much!
    Chris

    Carolyn!
    I first thought that with the little info I gave no one would even try to answer, therefor my astonishment when I tried to do what u said and internet worked!
    Thank you very very very much for you quick answer. I opened my macbook did what u said and in 2 minutes the problem was solved ( I spent the whole afternoon looking for forums where I could find an answer )
    Thank you! Very much you saved me much time!
    Have a good day!
    Chris

  • Swapped out AE for TC and now can't connect to Internet!

    Hello all.
    I just swapped out an Airport Express base station (the square one, not the old spaceship-shaped one) for a shiny new 1-TB Time Capsule. I figured that since 500 GB external hard drive for Time Machine backups is running out of space, so why not just get a TC so I don't have to worry about (a) hard drive space or (b) plugging in external drives again.
    I unplugged the AE and plugged in the TC. Everything else is the same: The TC is plugged into a Verizon DSL modem, and we have two MacBooks in our house. I configured the TC using the Airport Utility. Everything appears to be OK, except that I can't connect to the Internet any more.
    I have tried some of the tricks that have worked for other people on this discussion board -- namely, unplugging the DSL modem and the TC and restarting them. They don't appear to work. When I put the old AE back, everything works like a charm.
    Has anyone run into this problem before? I'd be grateful for advice and ideas. I don't want to use the TC as a secondary wireless network device, like a range extender. It's a pricey piece of equipment and it should do what it says on the box. I'm pretty sure that the fault lies somewhere between the DSL modem and the TC, but I'm not clever enough with these things to figure it out on my own.

    Same problem....3 calls to tech support and almost another one yesterday UNTIL I discovered that re-setting the TC (with the paperclip tool!) worked. The Airport Network, via TC, recognizes my Network and TC pops up into the airport Utility. i kept "losing TC in the Airport Utility page....it only showed AE/Base Station...not waht I wanted.
    I unplugged the Express (previous model,one that was prior to "X" capability, ie b/g) and left it unplugged.....this must be an issue) My ONE TO ONE instructors have offered to have a look at it, the AE,at my next appointment.
    I, too, have a DSL modem (Qwest) that I have unplugged without success (connections) Unplugging the units seems to work for some things but not this particular problem.
    Hope this helps.

  • Pressed reset button on Tomato flashed WRT54GL , now can't connect to Internet

    Hi everybody. I couldn't connect to the Internet yesterday and so I pressed the reset button on my WRT54GL which I flashed with Tomato firmware. This is the first time that I lost connection. I can access the http://192.168.1.1 site but I don't know what it the right configuration for my WRT54GL to be able to access the Internet. Did I bricked my router because I pressed the reset button? I can access the Internet when I plug the ethernet directly to my laptop. Any ideas? Thanks in advance. 

    You have to ask in a forum for tomato firmware. They should know what happens if you press the reset button. Here, in this forum, we usually deal with Linksys firmware.

  • Moved computer to new desk; now can't connect to internet or network

    I moved a computer to another office down the hall and now it won't connect to the internet or office network. Two other computers connected using the same ethernet plug and wire. Repaired permissions. Tried manually entering IP and using DHCP. What else should I try?

    I'm no expert but maybe try adding a new location.
    Network preferances -> location drop down -> new location
    Then try manually entering all the information required.
    Just a wild guess...
    -Ollie

  • Reset e3000 now can't connect to internet

    i was having issues with one of my devices after a power outage.  all my other devices worked (laptops, xbox, iphones, etc)
    i thought doing a reset on the router would get the odd device working again but all it did was mess up my internet.  i don't have the key or cd any longer from when i set it up.
    i get internet just fine when i plug directly into the modem with a cable.
    thanx

    possibly.... but it does see our network name at times (and others in the area at others).... it was a beast to connect the first day but finally did (we didn't do anything except keep telling it to connect over and over til it finally did).... and it kept connection except for one other power outage it didn't want to connect but finally did and had remained connected since (til the other day).... since then we've has a couple short outages and it just connected itself back again?
    and the same thing with my printer:  it didn't want to connect back again but finally did... and it's doing the same thing (and the printer is on a surge protector)  so far after changing the IP in the router everything else is connected without doing anything.... just automatic like it always is!
    the fridge is the samsung with wifi apps.... more of a gimmick, i guess... you get twitter (rolls eyes), pandora, weather (which i think is cool to have our weather/outside temp right there on the screen), some recipe app, and pictures (which again is cool on the screen saver!) oh... and AP headline news... 

  • Deleted Internet Explorer after installing Firefox and now can't connect to internet.

    Windows7 Network Adaptor - error code Ox80070426 -troubleshooter won't start. Windows security center won't start.
    Do I need Internet Explorer as well as Firefox?
    I'm posting this message from a windows XP PC as netbook won't connect to the outside world.

    Carolyn!
    I first thought that with the little info I gave no one would even try to answer, therefor my astonishment when I tried to do what u said and internet worked!
    Thank you very very very much for you quick answer. I opened my macbook did what u said and in 2 minutes the problem was solved ( I spent the whole afternoon looking for forums where I could find an answer )
    Thank you! Very much you saved me much time!
    Have a good day!
    Chris

  • I updated to mountain lion and now mail cannot connect to my server

    I updated to mountain lion and now mail cannot connect to my server.  It says check your user name and password are correct.  Well they are, and were.  Nothing has changed except the mac OS. 
    Has anyone else suffered this and knows a way around it?  Too annoying to log into my mail every 15mins via a web page anymore.
    Efforts tried to resolve this so far:
    retyped user name and password, removed account and created a new account, restarted computer, software update, searched forums.  so far all have proved unsuccessful.
    I have also written to my mail provider and am waiting for feed back from them, but if anyone has any advice it would be gratefully received.
    Many thanks,
    Mike

    Many users upgrading to Mountain Lion have run into this problem, myself included.  You likely have corrupted settings for your  "Outgoing Mail Server (SMTP)" for each of the failed Accounts.  Open Mail>go to Mail's Preferences>Accounts>select an Account in the left column to work on>then set up your Outgoing Mail Server which will INCLUDE resetting up your Password, as its asking you to.  Click on "SMTP Outgoing Mail Server" near the bottom of the Accounts window while your mail account is highlighted in the left hand column.  When you click on SMTP... you will see a drop down box icon offered at the right side of the line.  Click it and then select at the bottom of the the list "Edit SMTP Mail Server".  Fill in the required settings for your ISP mail account using their recommended settings.

  • After deleting files to clean my computer I now can"t connect my camera to my iphoto

    After deleting files to clean my computer I now can"t connect my camera to my iphoto  did I delete something and how can I add it back?

    Good idea from Klaus1!
    1058 Combo Update, 10.5.8...
    http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update

  • Hi Iv'e downloaded mountain lion but now can't open mail?

    Hi Iv'e downloaded mountain lion but now can't open mail?

    Office 2004 Applications Won't Work in Lion
    You must have Office 2004 which is a PPC-only suite and will not work in Lion. You need to upgrade to Office 2011 - Mactopia - or you can try the freeware suite, Libre Office, that is functionally similar to Office 2007 for Windows except it works on Lion.
    You may want to consider as well:
    These two suites are similar to Libre Office but not as current or as well-supported:
    NeoOffice
    Open Office
    And, then there is Apple's iWork suite:
    Pages - word processing and layout
    Keynote - presentation
    Numbers - spreadsheet
    Each can open and save Office compatible files. They may be purchased separately via the Mac App Store for $19.99 each.
    (Access to the Mac App Store requires Snow Leopard 10.6.6 or higher and an Apple ID.)

  • I upgraded to Lion and now can't print PDF files and Acrobat reader doesn't work anymore. What can I do to get it working?

    I upgraded to Lion and now can't print PDF files and Acrobat reader doesn't work anymore. What can I do to get it working?

    If you upgraded and were using a version of Acrobat Reader that was legacy, that is PPC compatible, then you will have to upgrade to a version compatible with Lion as Lion no longer has Rosetta to interface with the legacy software.
    I know that Acrobat, full version, 10 works with Lion...use it myself.

Maybe you are looking for

  • My USB Has Not Arrived But Is Listed As Delivered

    Hello. I'm hoping someone here will reply and assist me, as I have been leaving messages and calling for weeks now regarding an order I paid for but did not receive, and urgently needed when I ordered it on August 13. The order was a usb recovery dev

  • Problem with 6071E to write data on file?

    Hi, I would like to save my value from analog input of my 6071E card on a text file, I've only on channel selected but when I run my program I've an error. I'm in continuous mode but over than 10kHz and 10000 samples the program doesn't work, and I n

  • Move In Standard Workflow (ISUACBMOVEIN) : Automatic Owner Allocation Proc.

    Hello Experts, In the automatic owner allocation process, when we move out the tenant the owner is supposed to automatically move in with the pre-configured offset. In my case the workflow was not being triggerred so we defined the the linkage of the

  • Facing problem in call function starting new task taskname

    Hi all, when i call a function module using starting new task, it is failing with sy-subrc 3. can anyone guide me in this. see the code :   DATA   lv_taskname(7) TYPE c VALUE 'PEM_EXE'.     CALL FUNCTION 'PEM_SCHEDULE'  STARTING NEW TASK lv_taskname

  • How can I fix a problem upgrading iPhoto9 to iPhoto11?

    I have iPhoto9 (8.1.2) installed and working on an iMac running Lion and want to purchase an upgrade to iPhoto11 (current version) so I can use iPhoto with recently purchased Aperture3. Despite multiple attempts, to purchase the upgrade in the AppSto