Oxygen 8 / faderfox / motu ultralite

hi.
new to logic but i have some understating of electronic music set.
i have the oxygen 8, faderfox lc2, and a motu ultralite. when i connect the oxygen 8 through USB only than all works. when i combine the faderfox (midi) and the oxygen 8 (w. USB or Midi) i cannot get logic or Mainstage to recognize it. it sees the midi signal from the oxygen but it does not "learn."
i use the motu ultralite as the midi interface.
thanks.
liron

Hello, and thanks for your answer!
My MOTU audio setup always starts before the logic programme(it starts automatically on startup). But anyway i managed to solve this by leaving my MOTU switched off and then starting up LE8. As soon as everything loaded i switched it on, and the LE8 finally did it's thing...unfortunatelly i came accross another issue while trying to record a guitar at 96khz:
First i set up sample rate at 96khz from the LE8 menu, then double checked motu's display to see if it sync right and started recording...as soon as i hit a note, i get massive quantization distortion and weird thing is, i need to restart LE8 if i want to record even at 44.1khz, otherwise i still get the same effect.
One problem after the other...sigh
I hope this is something really easy to fix, like the previous one...i'm getting kinda disappointed. Any ideas?
Thanks again

Similar Messages

PROBLEM WITH MACBOOK PRO 2.4 Dual Core and MOTU Ultralite

Hello,
I Recently bought a macbook pro to have for my Live appearance.
I also had a motu Ultralite which worked super well with my Pc and with the macbook the first days
One day i had to play live in a club so i connect my soundcard but the macbook wont recognize it coz i cant see the popup window that i get everytime i connect my motu on it...i rebooted the soundcard then the laptop nothing...i started sweating coz my live performance would start in 20 minutes noting came out of it so i cancelled the gig for the moment and played a Dj set instead.
When i got home i connected the card again and was working perfectly till yesterday..So i thought there was something wrong with the Power in the Venue or something like that.
Yesterday i connected the soundcard and again does the same any other firewire device was working properly.
I searched online and saw there is alot of people having the same issue but no solution.can someone tell WHY sometimes it works and sometimes doesnt??its very stupid to have 2 machines with a cost of 2500 euro almost and they dont work well together
Op system: Leopard 10.5.7
Motu ultralite Mk2 firmware: 1.15
motu ultralite driver 1.4.21
Thank you in advance

Popping in to say that I have now a fully functional Ultralite (mk3) under OS X 10.5.8 on my Macbook.
I have found that people who have upgraded the firmware to 1.15 were having problems (according to the MOTU site this upgrade isn't actually meant for the mk3 anyways) with Leopard (maybe Snow Leopard too?) and needed the 1.00 version of the firmware.
Using the drivers supplied on the MOTU CD, the device would not appear when connected to the Macbook. However, removing these from the system prior to downloading the latest MOTU Universal driver from their website seems to have solved it.
Now after installing the universal drivers from the website the device works without any problems (driver 1.4.23 of MOTU Audio Setup). Hope this helps someone

Imac late 2012 problems with motu ultralite mkIII through thunderbolt to firewire

first - hi @all users here in the forum.
i have a really curious problem with my audio configuration. at first i must say the audio-config. with my macbook pro (mid 2010) and my imac (early 2008) works fine without problems by using firewire.
but not on my imac (late 2012). there is a static, high frequently noise on my monitors. and i don't find the reason for that problem. i have delete alle the audio drivers and make a fresh install. reset the nvram and pram with holding the power key and so on. two weeks ago i have contacted apple care and send the imac to the next service provider. first i think for a defect power-supply. but the provider located only a defect ram. they change it and send me the imac back. but nothing has changed. if i heard about the defect ram from the provider i know this couldn't never ever the reason for that problem.
i hope anyone can help a little bit by this problem...thank you.
here is my hardware setup:
- imac late 2012,"27 3.2ghz core i5 processor, 8 gb ram, 1tb fusion drive (osx 10.8.5)
-> connected over the thunderbolt to firewire adapter to
- the motu ultralite mkiii
-> connected to the yamaha hs80 with balanced cables

the static, high frequently noise on the right is stronger than on the left.

MOTU Ultralite Not Recognized in New MBP

Greetings!
I have a new MBP, with an original Motu Ultralite. I loaded the latest MOTU drivers for OS 10.6. I can't get the MBP to see the device anywhere. I tried a reinstall, and still nothing. Never had a problem before on previous system...
I have the MOTU plugged into my external drive, and then into my Firewire 800 on the MBP. Others do it this way, with no problem, and power doesn't seem to be the issue. I also plugged the MOTU directly into the MBP, with no change. I have checked System Profiler, and Audi/MIDI setup. I've tried everything I know how to do, to no avail...
Could it be the new drivers? I know the previous drivers for 10.3 worked fine. Do I need to uninstall the new drivers and reinstall the old drivers? Is there something I"m missing? I've been researching this for hours, with no fix...
Thanks in advance for any guidance...
Blessings,

Just an update...
I just turned on my computer and the MOTU suddenly mounted! While I don't have any profound explanation, I discovered my hard drive has to be powered on, in order for the MBP to find the MOTU. If I turn off the hard drive, the MOTU doesn't mount, but it will still power up. I had tried both the MOTU and hard drive in this same configuration earlier in the day, with no success...
While I wasn't initially using power to the hard drive or the MOTU, (running both bus-powered) I tried plugging in the power to the MOTU and shutting off the hard drive to see what would happen. The MOTU wouldn't mount.
It appears the hard drive needs to be on to pass along whatever signal mounts the MOTU. Yet, the MOTU powers up just fine without the hard drive being turned on. Seems to me it should mount if it powers up...
It would seem I only have a few options:
1. Leave the hard drive on when using the MOTU. (Not practical)
2. Purchase a firewire ExpressCard (which I believe requires its own power?)
3. Plug the MOTU into the MBP first, and daisy chain the hard drive to the second port in the MOTU. This would limit my FW 800 hard drive use to FW 400.
Any thoughts or other workarounds?
Blessings,

Motu Ultralite with Mainstage - No output form Mic 2

I plug the 'guitar' into the front Mic 1 socket and all works and sounds great.
I plug into Mic 2 in the back of the motu Ultralite and I get no sound, yet the meters on the LCD panel are showing input volume. Out is not happening from Mic 2.
Any ideas?
Thanks
Gary

OK, after looking at the setup stuff on the Ultralite it is actually a mixer, so stuff that is going to the inputs is getting routed to main outputs by the Cuemix software for the interface.
When you set the output of the strip on Mainstage to another set of outputs it is routing the softwares output to the 3-4 outputs but the mixer inside the Ultralite is routing the input signals (likely unprocessed) back to the outputs.
It looks like if you turn the software faders for the Main out mix for your guitar inputs all the way down Mainstage will see the inputs but the wont be routed to the Main output for monitoring...

Motu Ultralite not working in PowerMac G5 any OS

I have a Motu Ultralite that is recognized in Audio Desk and Reason but does not produce any sound. When used as an output for iTunes it produces sound for about 1:45 then turnes to noise. I have tried most OS's from 10.4.1 to 10.4.10 with pretty much the same resuolts. I am using the latest Motu drivers. The unit works on other Macs but not mine. I have a PCI graphics card not the AGP one that comes with the MAC. I am using 4.5 gigs of RAM. The firewire ports on the computer seem to be ok when moving data to and from an external drive. Motu support could was no help at all. I am posting here because I hope to reach readers who use audio interface cards. Any help would be greatly appreciated.
Power Mac G5 Mac OS X (10.4.10) 4 G RAM, PCI Video Card

Hey, this is a tricky one. May I suggest trying the following:
1. Disconnect all other Firewire devices
- to remove the possibility of something causing a conflict
2. Try a different Firewire cable
- may be subtly damaged
3. If possible try another Firewire audio interface
- will prove that your Mac and it's Firewire ports are ok
- it's possible that when you're using a hard drive that if there are read/write errors OS X is doing error correction so you're not seeing any noticeable difference in performance, whereas with audio, it's a continuous stream and errors that are occurring you're hearing as noise
4. If possible try a different Ultralite
- will prove that your current ultralite is faulty
Basically, try to isolate whether the issue is with the Ultralite or your Mac.

Mainstage 3 / MOTU Ultralite Mk3 Hybrid driving me crazy

Hi,
I get constant dropouts when trying to use MainStage 3.0.4 with MOTU Ultralite Mk3 Hybrid interface. And everytime the dropouts happens I get these messages in the console. Sometimes over several hundreds of them when things are really bad.
AND...it gets worse whenever I go to a rehearsal or live onstage. Go figure that one out!
kernel[0]: IOAudioStream[0xffffff8052709000]::clipIfNecessary() - Error: attempting to clip to a position more than one buffer ahead of last clip position (1e2,158)->(1e5,428).
I do not get these errors when using internal audio only.
I get no help from MOTU who are saying that there's no problem with the hardware.
I have received a second MOTU Ultralite interface. Same problem.
I have tried both USB (with nothing on the bus except the interface) and Firewire (over Thunderbolt-adapter). Same problem.
What is happening?
Please help me!
Here's my computer specs:
MacBook Pro Retina mid-2012
Processor: 2,7 GHz Intel Core i7
Memory: 16 GB 1600 MHz DDR3
Graphics: NVIDIA GeForce GT 650M 1024 MB
OS version: OS X 10.9.4 (13E28)

Nope, no good. Seemed like it was going to behave. I left the computer idling on my MainStage-concert and when I came back i had these in the console....
2014-07-10 21:12:26,000 kernel[0]: IOAudioStream[0xffffff8053551c00]::clipIfNecessary() - Error: attempting to clip to a position more than one buffer ahead of last clip position (e3f5,c0)->(e3f8,288).
2014-07-10 21:12:26,000 kernel[0]: IOAudioStream[0xffffff8053551c00]::clipIfNecessary() - adjusting clipped position to (e3f8,c0)
2014-07-10 21:12:26,000 kernel[0]: IOAudioStream[0xffffff8053551800]::clipIfNecessary() - Error: attempting to clip to a position more than one buffer ahead of last clip position (e3f5,c0)->(e3f8,288).
2014-07-10 21:12:26,000 kernel[0]: IOAudioStream[0xffffff8053551800]::clipIfNecessary() - adjusting clipped position to (e3f8,c0)
2014-07-10 21:12:26,000 kernel[0]: IOAudioStream[0xffffff8053551400]::clipIfNecessary() - Error: attempting to clip to a position more than one buffer ahead of last clip position (e3f5,c0)->(e3f8,288).
2014-07-10 21:12:26,000 kernel[0]: IOAudioStream[0xffffff8053551400]::clipIfNecessary() - adjusting clipped position to (e3f8,c0)
2014-07-10 21:12:26,000 kernel[0]: IOAudioStream[0xffffff8053551000]::clipIfNecessary() - Error: attempting to clip to a position more than one buffer ahead of last clip position (e3f5,c0)->(e3f8,288).
2014-07-10 21:12:26,000 kernel[0]: IOAudioStream[0xffffff8053551000]::clipIfNecessary() - adjusting clipped position to (e3f8,c0)
I'm dreaming nightmares of those bu now. And I'm always onstage.

MOTU Ultralite looses its FW connection at regular intervals

Hello Friends
here is a real frustrating problem !
I have the MOTU Ultralite mK3 FW soundcard. First when I plug the FW cable and the computer is off I get a regular churning noise from my MAC
When the MAC is on; no churning noise , but the connection seems to go on an off status , LCD flickers on and off at regular intervals , the backlite leds go up and down the unit goes beserk !! though I might add it initializes fine when first powered on
I have tried all the basic trouble shooting , 'changing cables , pluging different FW devices these all work !!!!)
I even plugged the ULTRALITE on my PC computer , and guess what !! it works fine !! no problemo !!!*
I have tried to contact MOTU but there tech service is god **** awful , it has been a month now.
I think maybe the 10.5 os upgrade might be the reason , because I did have the unit working when I first got it !
Any help is appreviated !!!

hi friends
thanks for your insight !! however problem remains the same even after the suggestions
yes trying to' isolate' the problem , but here it is !!!
the MOTU Unit works no problem on my PC computer , I have tried (even got a brand new FW cable) Plugging Other FW units work fine on my G5 .
The MOTU works fine with the power supply , but as soon as the FW is plugged , it freaks out !!
Here is a video link of exactly how the MOTU behaves
http://www.synfony.com/temp/mk3.mov
what do you think ???

MBP and motu ultralite NOT working. Firewire.

Hi, I bought a macbook pro 2.5 with a HD of 200G 7200rpm and I am trying to connect the motu Ultralite. I tried this audio interface in other laptops and desktops (PC) and it does work with no problem.
I am running Leopard 10.5.2 and the motu does not behaves quite ok.
Also tried with windows XP with bootcamp, and it does not work at all. It is recognized, but when I open the properties and load the ASIO drivers it says the MOTO has been disconnected and suggests to turn it on again (which obviously is already connected and powered on)
I read, this can be related to firewire port. Anybody with similar problem?
Any help or suggestion would be much appreciated.
Thank you all.

I've had problems with my MOTU Traveler and OSX ever since purchasing my MBP.
A factory reset of the audio device has been motu's fix which works for a little while but
the problem of the device not being recognized always returns.
I've found that if i unplug then re-insert the firewire cable while the audio device is powered on it
is sometimes recognized but not always.
I do not experience this problem when using DAW software which addresses the hardware directly,
only when using software that relies on the system to address the audio hardware ie; (quicktime, itunes... you get the idea). Works fine on my powerbook G4.
I've read these issues may be related to apples choice of firewire chipset in the new machines?

Anyone USing a MOTU Ultralite MKIII w/ Cue FX ?

Hi All !
I am brand new to both the MAC and digital recording as of last week.
I purchased my first Audio interface on Saturday a MOTU Ultralite MKIII.
I was wondering if anyone else was using this interface with Garageband. I'm looking to hopefully find some more resources on the device specific to using Cue FX with Garageband. I did try a search, but it didn't bring up anything specific
Thanks !!

jcurri wrote:
I did a weeks worth of research on the topic...was able to finally load up cuemix fx after reinstalling windows SP2
but here's the bad news...
there's still no sound coming out of it, cuemix fx keeps "stalling", and it's pointless to have it as an audio interface as it's completely unusable.
STAY AWAY FROM MOTU FIREWIRE WITH BOOTCAMP
Some of Apple's Bootcamp/PC drivers are pretty weak, I did a Bootcamp setup for a friend a few weeks ago and we ended up going to Microsoft's site and downloading drivers for the Macbook's common hardware, namely the Realtek audio device and the Broadcom wireless driver. The new drivers were much better than what Apple has included with Bootcamp.
If you can find out what Firewire chip is on the Mac you should be able to download and install drivers that work properly.
Also, WinXP_Pro is the OS to use.
pancenter-

Macbook pro, motu ultralite,dj mixer---traktor pro

hello to you all...im new to using a mac and i would like a setup related question....
i have a macbook pro, a motu ultralite a usb midi controler and traktor pro
i would like to connect firs my motu ultralite which has a firewire 400 to my NEW macbook pro that uses a different firewire (maybe 800) and then i woul like to connect my motu ultralite whicha has the jack outputs to an dj mixers(RCA) and then the usb midi straight to my laptop... can someone tell me please what cables do i need to do that??
thank you so much for the help

Dumb me! Settings in the Utilities folder.

MIDI in via Motif ES USB or MOTU Ultralite MK3 MIDI in

Hi,
which MIDI configuration do you suggest?
1. MIDI out from Yamaha Motif ES6 -> MOTU UltraLite-mk3 Hybrid MIDI in -> MacBook Pro 2012
or
2. USB MIDI from Yamaha Motif ES6 -> MacBook Pro 2012
Maybe it make no difference which one I choose. However, the following statement can be found on the MOTU site here:
"Sample-accurate MIDI — connect a MIDI controller and/or sound module with no separate interface needed. MIDI I/O is sample-accurate with supporting software."
/Mattias

do you speak japanese?
seriously - the first problem i had with the ultralite was that i didnt know you needed to install the software before plugging it in . . hope that helps.

Can't send mono outputs from Logic 9 to my Motu Ultralite

Hi all, any help would be most appreciated. I want to send mono channels from Logic 9 to my Soundcraft mixer via my Motu Ultralite in order to try out some live dubbing. When I set a channel to mono nothing comes out of the Motu. I can make it work by panning things left and right but surely there is a better way?! I went through all the mono outputs but none seem to work.
Any ideas?
Cheers
Jamie

Work
I have a Powermac G5 at work and tried with the Mail Client and with Entourage. Both were successfull.
Home
My ISP at home is All2Easy.net, but I also recently signed up for MSN, I'm not sure if you can even set up the computer to send through MSN though. I have tried smtp.email.msn.com but can't get it to work (not sure if it is because I can't send anything, or if they are the wrong settings)
I have it set to "log-in requires authentication". The settings hadn't changed when the problems started occuring though. An interesting new development is that I can't connect through All2Easy anymore (I chose them for the price).

Motu Ultralite with Alesis Multimix 16?

Hey dudes, dont jump on my back if theres a post about this already! had a look and cant see it..
Just wanting to know if anyone has the above in their setup? and for feedback on it...FYI iv played around with the multimix and think its worth a buy for messing around at home and possibly using through motu ultralite (planing on getting one next few weeks).
Cheers

it turned out time does indeed tell.....go figure

MOTU UltraLite MIDI Thru????

I am using an M-Audio keyboard controller into my MOTU UltraLite and then to my Proteus 2000 through an SPDIF connection.
I have no problem playing the P2 when LE7 is open. I can switch banks/presets and have access to all my ROM cards. The problem is that the P2 won't play on its own unless Logic is open.
Prior to upgrading to the MOTU UL, I was using an M-Audio FW410. That unit had a hard 'THRU' switch on it that, when selected, would allow me to play through the P2 without Logic having to be open.
There is no such switch on the UL and I can't find anywhere in the MOTU manual, or the UL itself, if it is possible through a software selection.
Is this at all possible to do with the UL?
Thanks.

I am using an M-Audio keyboard controller into my MOTU UltraLite and then to my Proteus 2000 through an SPDIF connection.
I have no problem playing the P2 when LE7 is open. I can switch banks/presets and have access to all my ROM cards. The problem is that the P2 won't play on its own unless Logic is open.
Prior to upgrading to the MOTU UL, I was using an M-Audio FW410. That unit had a hard 'THRU' switch on it that, when selected, would allow me to play through the P2 without Logic having to be open.
There is no such switch on the UL and I can't find anywhere in the MOTU manual, or the UL itself, if it is possible through a software selection.
Is this at all possible to do with the UL?
Thanks.

Oxygen 8 / faderfox / motu ultralite

Similar Messages

Maybe you are looking for