P 780 unlock pattern change

I cannot change the pattern as when I go to settings-> security-> lock screen 
it asks for the confirm pattern many times recursively and does not open up the menu to change it. 
This is happening with the latest update. 
I am using the correct pattern. the same which I use to unlock the screen. 
Info about phone. 
1. andorid version - 4.4.2
2. Build num - P780_ROW_ 8G_S226_140919
3. Lock Screen Version - V1.1.154.140515.e07cf6a_row
Solved!
Go to Solution.

Hi
Have you tried a factory reset?
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as ''ACCEPT AS SOLUTION"! 
Unsolicited PM's will not be answered! ....Please post your question/s in the appropriate forum board.
English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

Similar Messages

  • Nokia X3-02 unlock pattern on software version 06....

    Hi,
    I upgrade firmware to 06.xx. Now my unlock pattern is like iOS device. Can I change it to my old original unlock pattern?
    Regards,
    KMThu

    The slide to unlock pattern is included in the firmware upgrade. so it cant be reverted unless another future upgrade changes it back as it is not possible to downgrade.
    Please mark the post as solution if it solves your problem.
    Current Device - Nokia Lumia 1020/920

  • Phone after restart asking for unlock pattern which I have not set and no other option is given

    Hi all, my Z3 Compact phone was heating up a lot in the recent summer days. At some point it was not reacting and not booting. So I pressed the yellow OFF button next to the nano card SIM holder.http://support.sonymobile.com/gb/xperiaz3compact/userguide/Resetting-your-device/ After this, the phone restarted and it is asking me for an unlock pattern, which I had never set before.It is not offering me any other option like Google identification or security question. And after 5 wrong attempts it tells me to wait 30 sec. I can see that the phone is working, I receive calls and can see that messages arrive. But I can't unlock the phone!! I tried a hard reset using PC companion but it complains and says that I need to have the screen unlocked to continue! So also no solution there! Any help would be greatly appreciated.

    Hi
    Try this and see if it helps > http://talk.sonymobile.com/t5/FAQ/How-to-unlock-a-phone-w-o-reseting-reformating-the-phone/td-p/927295
    Also, regarding repair with PC Companion, follow steps this way
    Update / Repair your phone via PC Companion
    Download PC Companion and install it. Do not connect your phone until you're asked to do so.
    Launch PC Companion > Start Support zone > Start Phone/ Tablet Software update > select Repair my Phone / Tablet > Follow the on-screen instructions it shows. 

  • What should you do if you forget the graphic unlock pattern?

    There are 2 methods to unlocking the Ace if you have forgotten the unlock pattern.
    The first is
    After 5-6 attempts of failing the pattern there is a button that appears that says
    Forgot Pattern
    Tap on the picture below.
    You will be asked to sign in using your gmail account email address and password (the account that you created or signed into when you first started using the phone)
    If for some reason you do not know this information, the only other way to bypass this is to perform a reset (this will clear any stored data on the phone, your contacts may remain if they were stored on the sim card)
    The second is
    To perform the reset
    Power off the phone
    Hold the volume down key
    Turn the phone back on
    Using the volume down key, highlight Clear Storage and press the power key to select
    Press the volume up key
    This will remove anything that was on the phone and will prompt you to create another pattern if you choose to. If you never want to use the pattern unlock again simply press cancel.
    More read:Mobiwhsle,namely mobile wholesale supplier,as the next generation international trade network for mobile wholesale,offers the cheapest,the best quality phones and reliable service.

    If he's forgotten the passcode then he will need to connect the iPad to the computer that he normally syncs to and he should then be able to reset the iPad and re-sync his content to it (http://support.apple.com/kb/HT1212) - he may need to put the iPad into recovery mode : http://support.apple.com/kb/ht1808

  • How do you get your Pad unlocked to change provider?

    I have a 4th gen IPad with wifi & cellular with Verizon. I have changed to ATT and want to change the IPad but NOBODY wants to tell me where to get it unlocked so it can be changed.  Doesn't anybody else have this issue?

    You need to talk to ATT because you'll need an ATT sim card for your ipad.  The ipads are not locked.  I just did a search on this issue and back in March 2012, there were many posts (including a how-to at You tube) telling how you can change sims.  But only for going from Verison to AT&T.  You can't go the other way.
    Google:  "change ipad from Verizon to AT&T"

  • Pattern changes after reopening the file.

    I was trying to remain the posiition of the pattern applied to an object after I moved (or copied and moved) the object, so I selected the option "Transform Pattern Tiles" < General < Preference or even selecedt the option in the Transformation panel. The result was what I wanted, the moved/copied and moved object has identical pattern style as the original object.
    However, after I saved the file, closed it, and then reopened it, the position of the pattern of the moved object somehow changed.
    To demonstrate this issue, I've created a pattern like the following:
    I applied this pattern to a sqaure, which appears like this:
    I ensure both settings in the Preference and Transformation Panel, and then I dragged the square while holding the Alt to create a duplicate in aother position, which of course resulted in an identical square exactly like the above image.
    Now the file has two identical squares in it, I saved the file and closed it, and then I reopend the file.
    The second square now appears like this: , in which the pattern has different distribution style than previously. The only way I know to solve this is to expand the object and then the pattern style will be consistent after being moved.
    I'm just wondering, is it a bug, the way it is, or did I just overlook any settings?
    The file I used to test is in the attachment for you to see for yourself. I suggest you copy more than a few and save the file, close the file and then reopen it. Because sometimes you might just get lucky.
    Note: I've seen this issue in both Illustrator CS and CS2.

    Hi Scott,
    Thanks for replying. Let me rephrase my question:
    Before moving the object with pattern, I did check the option "Transorm Pattern Tiles".
    The result is what I want: a duplicate with exactly the same pattern distribution hehavior. But after I close the file and reopoened it,
    the pattern distribution on the duplicate object somehow changed and different from the original object.
    I tried to delete AIPres file. But the issue remains.

  • Match pattern: change regular expression search via front panel?

    Hello,
    I have an application that I am developing which is making use of Serial VISA.
    I am scanning the output of a serial port which is constantly spitting out a long string of data. 
    Data is being pulled from the string with several combinations of SCAN FROM STRING functions and MATCH PATTERN Functions.
    Question:
    How can I use a button or TEXT box on the FRONT PANEL that can change the MATCH PATTERN Functions Regular expression?  
    for example the string may spit out the following:
     Weight\s\s\s\s\s\s\s\s\s\s\s\s-0.00\slb\s\s\s\s\s\s-16\sbits\s+74.40\s\B0F\sCorrected\s\s\s\s\s\s-0.00\slb\s+0.999987\s%\s\r
    in this case the serial device is spitting out data in LB.
    It could be possible for the device to spit out data in KG ... thus I need to change the REGULAR EXPRESSION.
    Thank you for your time

    Hi,
    just a quick example.
    there are other way of doing this but I think the ComboBox is quite an easy one.
    hope this helps
    When my feet touch the ground each morning the devil thinks "bloody hell... He's up again!"
    Attachments:
    ComboBox.vi ‏12 KB

  • Can't seem to unlock pattern HP eStation ZEEN. How do I reset?cc=us

    Forgot pattern of HP eSTATION ZEEN, can't unlock to print. 

    To perform a reset of the HP eStation Zeen, press and hold the POWER button at least 8 seconds.
    You can reset the printer by unpluging the power cable and plug it back in.  Press the On button to power up the printer.
    If I have been helpful, a Kudo is always appreciated.

  • I am logged in as Admin user, but cannot unlock and change system settings-why?

    I am the admin user on my iMac with OS-X 10.7.5. When I open up system preference and try to change anything, the lock on the bottom won't unlock. What gives?

    Bizzare... it fixed itself. Same password.
    I noticed that the time was off by about 20 mins and wanted to adjust, but couldn't unlock the system preferences. The time & date preferences suggested turning on the wi-fi (I normally use a cable to connect to the internet) and when I did the date & time synched itself.
    After that, I was messing around under the desk and accidentally switched off the power strip. When I rebooted, I went into the preferences, and low & behold, the lock was unlocked. I can lock & unlock it (with prompt for admin password) normally.
    Strange.
    Everything is working the way its supposed to, but I am going to get replacement disks from AppleCare anyway just in case.
    Thanks for the advice.

  • Exam pattern change

    Hi,
    I heard that the exam pattern for Oracle certification exams have been changed,effective from June 01, 2010. Is that all true?
    If so, can someone please let me know what is the current question pattern for OCA/OCP?
    Thanks,
    Karthika

    user9546145 wrote:
    The pattern I mean here is, the type of questions in OCA/OCP (PL/SQL Developer). Till now, we were getting multiple choice objective questions.
    Is it going to be the same pattern of questions or Oracle has changed its pattern of questions for OCA/OCP (PL/SQL developer)?There is no sign of any change in the basic format of any exam.
    and in particular I see no change in the exam topic for 1z0-144, 1z0-146 and 1z0-147.
    What has changed at some point in the last 10 months (at least for some exams) is the exam interface / skin /presentation Look and Feel. Same thing under the skin, just a little difference in style (The difference might be like the basic first glance appearance differences between say Windows XP and Windows Vista ... but dont take this example to far). And I have seen a reference which may indicate to me that at least test provider is refering to this as 'pattern' with regard to their exam simulator (and this may be unauthorised test providers using this term so beware http://blogs.oracle.com/certification/2009/05/the_route_you_choose.html).

  • Private Mode - I forgot my unlock Pattern, how can I reset it?

    I set up Private Mode when I first got the Note 4.
    Now I forgot my pattern to unlock private mode.  How can I reset it so I can use private mode again?

        bappelman, I am sorry to hear that this is going on. Unfortunately when a passcode is unknown you would have to reset the device to factory defaults in order to reset the password/pin. Take a look here to see how http://www.verizonwireless.com/support/knowledge-base-104013/.
    AdamG_VZW
    Follow us on Twitter @VZWSupport

  • What Design Pattern - Change Language functionality

    On my application, I will have a series of buttons to choose
    a language. When the user chooses a language, all control labels,
    pop-up messages and others will change at the chosen language.
    I would like to do this from an OOP point of view and use
    Design Patterns. Which one would you recommend to use?
    My guess is the Strategy Pattern. Am I right?
    Thanks for any comment or link.

    The Strategy Pattern is used to swap algorithms dynamically.
    Based on user input a decision can be made to run a (set of)
    function(s). This behaviour is encapsulated in seperate objects.
    You just want to swap data at runtime. Or maybe set some
    behaviour regarding specific functions in languages like the way
    currencies are handled, measurements and the like. The latter would
    be implemented as Interpreter Pattern.
    When it's merely data that needs to changed/loaded at
    runtime, than it's more like a change of the Model in the MVC
    design pattern, using an Observer to notify all registered
    'listeners' and using a Command to get the thing going.

  • Include files filename pattern change request

         Could you guys be my heros and rename the include files in the TLF source to NOT be *.as?
    FDT hates that and won't let me compile because it detects that the file doesn't contain a valid class.
    eg, in my local copy, I changed them to *.as.inc and everything's lovely.

    Update: there's not much we can do in the short term, but in the longer term we're investigating a solution. I've written a bug for this. I'm afraid in the meantime you'll have to keep renaming the files.
    Thanks!
    - robin

  • Alias 2 sudden vibration pattern change

    My alias 2 has typically given me three medium length vibrations for a text or anything.  As of today, it now vibrates for 5 short bursts followed by a long burst ranging from 15 to 25 seconds upon receiving a text.  What to cause this? How to fix it?
    Chiko

        I understand your concern Chikokishi!  I'm not sure what is causing this, however you and I can fix this together!  Try selecting a ringtone and then change the setting back to vibrate and remove the back battery door and testing upon powering up.  If unsuccessful I suggest backing up and completing a factory reset here http://bit.ly/SZJRF7 .  Please share your test results.  Thank you!
    Tominque B.
    Please follow us on Twitter @VZWSupport

  • Locked app will not unlock when changing permissions.

    Also, will not delete.  Any thoughts?

    No luck.  When I click the padlock, it should popup my username and ask for my password.  it doesn't even do that.  the padlock just jiggles and doesn't attempt to open.

Maybe you are looking for