P & L PLD...generated on date not required

Hi Forum,
I am trying to take print-out without print of printing date on PLD of P & L.
I have save as the system PLD and remove the printing date & time make it as default PLD.
But still, it date is coming in the print.
I have doubt that, the P & L PLD which is set as default is not which is showing on preview.
Can any body guide me, from which PLD i have to remove this print date & time and make it to as default PLD.
Regards,
Chintesh Soni
Edited by: Darius Heydarian on Mar 20, 2008 3:21 PM

Thanks Dear,
I have checked, it is showing "Profit & Loss Statement" at header of the print preview.
I have also checked the fields of the report, in Preview there are fields Particular, Current Period & Current Year but on the PLD list of this form there are four PLDs which does not containing the fields listed above.
I am using SBO 2005 B, PL 25.
Please guide.
With Warm Regards,
Chintesh Soni
[email protected]

Similar Messages

  • Clearing after posting date not required in FF67

    Hi
    I have given posting date as 31.01.2010 in FF67 (manual bank reconciliation statement).
    But in-spite of the posting date is given as 31.01.2010, all the entries posted with posting date of February in incoming account / outgoing account is also considered for clearing.
    So is it possible to restrict the same.

    Hi,
    You might have entered an amount of a document, which is posted with FEB posting date, while entering the bank statement items in the next screen of FF67.
    The clearing date can be earlier than the posting date while FF67.
    The actual posting date (FEB date) will become the value date for the reconciliation posting entry to the main bank account line item. (Line item generated by system by doing FF67)
    Please check.
    Thanks,
    Srinu

  • MRP Generated PR should not be converted into PO before release date.

    Gurus,
    In MRP generated PR system defines a release date for the PR(date by which the PR should get converted into PO).My requirement is system sholud not allow me to convert that PR into PO before that Release date.
    MRP generated PR are not subjected to Release strategy.
    Is their any Configuration,User Exit for it.
    SN

    Hello Sanjay,
    please try setting up an error from OMCQ t-code.
    If this not helps then please contact your abaper, I m sure he will find out a way out of this.
    Hope this helps..
    Robin

  • Is there a mobile phone that can sync with ical, but does not require a data plan?

    Is there a mobile phone that can sync with ical, but does not require a data plan?

    Thanks for the reply.  I already have this info, but have spent several hours trying to cross reference with the product descriptions and the different carriers websites.  I was hoping there was an easier way.
    John Maisey wrote:
    Hi,
    You cakn sync many phones using iSync. See here: http://support.apple.com/kb/ht2824
    Best wishes
    John M

  • Trivia game that does NOT require data

    looking for a trivia game that does not require an Internet connection. We are going camping and like to play a trivia game around the camp fire, but there is no cell service or data or wifi. We have used Mr Trivia for the last couple years but have ran out of new questions. Looking for something simular in function. Most of what I've tryed does not funtion without running data.
    ipad, iphone or pod (mutiple generations)
    thanks

    dalewren wrote:
    Are there any carriers that allow this?
    Not that I'm aware of. In fact, many carriers, if they detect an iPhone on their network without a data plan, will either bill you for such or cancel your service.

  • Are there any apps which will allow local calling using data only that do not require any special numbers called out initially and does not require the receiver to have a similar app or account?

    Are there any apps which will allow local calling using data only (not minutes, no extra charge) that do not require any special numbers called out initially and does not require the receiver to have a similar app or account?  Just for random local calling.

    Yup.
    Here is a way you could solve this by adding an extra column and a small lookup table:
    The lookup table is here for the copying:
    0
    1
    k
    kilo
    2
    M
    mega
    3
    G
    giga
    4
    T
    tera
    5
    P
    peta
    6
    E
    exa
    7
    Z
    zetta
    8
    Y
    yotta
    In table 8 (the one on the left in the image) column A is where the values are. 
    B1=A1÷(1024^VLOOKUP(INT(LOG(A1, 1024)), Binary Prefixes::A:D, 1))&" "&VLOOKUP(INT(LOG(A1, 1024)), Binary Prefixes::A:D, 2)&"B"
    this is shorthand for... select cell B1, then type (or copy and paste from here) the formula:
    =A1÷(1024^VLOOKUP(INT(LOG(A1, 1024)), Binary Prefixes::A:D, 1))&" "&VLOOKUP(INT(LOG(A1, 1024)), Binary Prefixes::A:D, 2)&"B"
    select cell B1, copy,
    now select all the cells in column B, paste

  • Changing the Default meta data field property required into not required.

    Hi,
    Is it possible to change the default meta data field property values in UCM server.
    For example consider the meta data Revision field which property required is true, then how to change this property required into not required.
    Is this possible or not?
    Thanks
    Hari

    Hari,
    in your case (if you don't want to use versioning) I'd rather recommend to change it to hidden than not required. You should be able to do it with standard profiles (the field name, I believe, is dRevision)
    I don't think you can have the field empty (in case someone deletes the content).

  • I don't have the up to date system requirements to run iCloud on my mac but would still like to access my email on my mac.  I think I need to update my settings, but am not sure what to do.  Can anyone help.  thanks

    I don't have the up to date system requirements to run iCloud on my mac but would still like to access my email on my mac.  I think I need to update my settings, but am not sure what to do.  Can anyone help.  thanks

    Welcome to the Apple Community.
    If you haven't done so already you need to migrate your mail account to iCloud first and do so IMMEDIATELY at the website Move
    Then
    Delete your mail account from Mail preferences and set it up again using the Mail Server Information.
    Some users have apparently encountered issues using this information in pre-Lion set ups (I haven't), Roger Wilmut has kindly provided instructions for those who find themselves with this problem.
    Entering iCloud email settings manually in Snow Leopard or Leopard
    Entering iCloud email settings manually in Tiger

  • Warning: untrusted X11 forwarding setup failed: xauth key data not generate

    Upon connecting to a RedHat Enterprise Linux server via ssh -X I get the following:
    Warning: untrusted X11 forwarding setup failed: xauth key data not generated
    Warning: No xauth data; using fake authentication data for X11 forwarding.
    I have previously (as in last week, ending 11/1/2008) been able to use x11 forwarding from the machine I'm trying to connect to. This problem also occurs with other servers, meaning it must be a problem with my local machine. Any suggestions are welcome.

    I get that if I use
    ssh -Y ...
    but NOT with -X.
    Do you have a $HOME/.ssh/config or /etc/ssh_config file that is specifying ForwardX11Trusted?
    Mostly I ignore the message when I get it as, my X11 forwarding works OK, AND I'm in an environment where my fellow employees could do much naster things to me (and get fired for it), than spoofing my X11 sessions.

  • I have a DVD project that takes about 14 hours to generate. Is there any way to periodically save it during encoding so power failures or other problems do not require a complete restart?

    I have a DVD project that takes about 14 hours to generate. Is there any way to periodically save it during encoding so power failures or other problems do not require a complete restart?

    No.  Are you saving the project as a disk image rather than burning directly to disk from iDVD?  If not then that's what I suggest you do.  That will separate the encoding process from the burn process to save time and disks if the encoding is bad.  It also lets you burn a second or third disk without having to encode again.
    OT

  • Need Help Choosing A Basic Phone That Does Not Require A Data Plan

    Hello,  I need to replace my current basic phone and do not qualify for an upgrade yet.
    I need to find a new or used phone that does not require data. Can someone please give me some models that will work that are newer?
    The VZW prepaid models have to be used 6 months on prepaid before you can use them on a contract and I have a contract.

    Usually on eBay, the listing will indicate if it's prepaid.
    I agree with Droid Usrr that the Intensity 2 is worth checking into, because it has a great rubberized keyboard and you can get one new for less than $100.
    Depending on what you're willing to spend, I also noticed that the Wal-Mart in my area is selling the brand new Intensity III off contract for $175. That way, you'd still have the year warranty on it, and it's a solid phone.
    There usually are quite a few inexpensive feature phones on Craigslist, too, if you're not opposed to meeting with strangers. It's best to meet at a Verizon store and activate it before handing over your money.

  • List of phones that do not require a Data Plan?

    I do not personally need a data plan since all I use with my phone is making calls and texting. I have been using the same phone for almost 4 years now but its all beat up and the battery life is going down and randomly dies down regardless if I do a full charge.
    Is there a list of current verizon phones that do not require a data plan? I know almost all phones require a data plan but there are a few that don't. Looking for the "requires minimum data plan $9.99/$29.99 per month" under phone description is a bit time consuming plus I do not think Verizon lists on their website every phone that is available.
    I perosnally would not mind the Alias 2 (a current phone that looks like it can pass without the data plan) but it looks like even that phone requires a data plan.
    I can go on and on about how phone companies are having these charges to users but I guess we have no choice.. I feel bad for the older loyal customers who need to upgrade their cell phones and plans but have no use for data plans (due to generation differences, no offense but they would least likely need to check email, use the internet, etc.)

    You might be interested in this. Here is a thread of phones mentioend that don't require a data plan-->Discontinued Phones No Data Plan  Of course their discontinued,but you can still get them else where

  • Date field (not required) causing an error...Please assist!

    Hello, I am a beginner when it comes to ColdFusion could someone please assist with this issue?
    I have a date field in my application that is not required, I want users to have the choice to leave this field blank.
    Below is a breakdown of what I have going on:
    On Add/Edit page:
    <cfinvoke component="test"
               method="get"
               ReferenceNumber="#URL.RefIDNum#"
               returnvariable="record">
    <cfset ThisIsTheDateField=DateFormat(record.ThisIsTheDateField, "MM/DD/YYYY")>
    <cfform action="process.cfm">
       <cfinput type="Text"
                name="ThisIsTheDateField"
                value="#ThisIsTheDateField#"
                message="ThisIsTheDateField must be a valid date"
                required="no"
                                            validate="date"
                validateAt="onSubmit"
                size="50"
                maxlength="10">
    On process.cfm:
    <cfinvokeargument name="ThisIsTheDateField"
                       value="#DateFormat(FORM.ThisIsTheDateField)#">
    On CFC Page:
    <!--- Method arguments --->
    <cfargument name="ThisIsTheDateField"
                  type="date"
                  required="no"
                  hint="ThisIsTheDateField field">
    Query Value for this field:
    #CreateODBCDate(ARGUMENTS.ThisIsTheDateField)#,
    The error I get is:
    Error Occurred While Processing Request
    The THISISTHEDATEFIELD argument passed to the add function is not of type date. 
    If the component name is specified as a type of this argument, it is possible that either a definition file for the component cannot be found or is not accessible. 
    The error occurred in E:/site/test.cfc: line 56
    54 :
    55 :  <!--- Add a record --->
    56 :  <cffunction name="add"
    57 :              returntype="boolean"
    58 :              hint="Add a record">
    I need a way to make this field accept blank entries... when I leave it blank I get the above error!
    Thank you!

    The cfif does not surround the cfargument.  Put your cfargument for ThisIsTheDateField the same way you have it for your First/Second/Other Thing cfargument.  Then, understand that even though you have a cfargument tag that is named "ThisIsTheDataField", that the variable "arguments.ThisIsTheDataField" doesn't necessarily exist (because you have defined the argument as optional).  If it doesn't, you can't use it, otherwise you will get
    Element THISISTHEDATEFIELD is undefined in ARGUMENTS.
    So for the parts of your function where you will want to do something specific if the ThisIsTheDataField was passed to your function, you have to check using IsDefined("argument.ThisIsTheDataField") to determine if that variable exists or not.  SO, to summarize using the example you supplied above:
    <cffunction name="add"
                 returntype="boolean"
                 hint="Add a record">
      <!--- Method arguments --->
      <cfargument name="FirstThing"
                  type="string"
                  required="no"
                  hint="First Thing">
      <cfargument name="SecondThing"
                  type="string"
                  required="no"
                  hint="Second Thing">
      <cfargument name="ThisIsTheDateField"
                  type="date"
                  required="no"
                  hint="ThisIsTheDateField field">
      <cfargument name="Fourth Thing"
                  type="string"
                  required="no"
                  hint="Fourth Thing">
    <cfif IsDefined("arguments.ThisIsTheDateField")>
       <!--- operations that happen if ThisIsTheDateField was passed to the function
    <cfelse>
        <!--- operations that happen if ThisIsTheDateField was not passed to the function --->
    </cfif>
    As an example, let us say that you want to have the date be a default value (say, today's date), if the date isn't passed to the function.  You could do:
    <cfif IsDefined("arguments.ThisIsTheDataField")>
        <cfset TheDateField = arguments.ThisIsTheDataField" />
    <cfelse>
        <cfset TheDateField = Now() />
    </cfif>
    At the end of this code, the variable "TheDateField" will be guaranteed to have a date, and the date will be the date passed to the function if one was passed, or otherwise today's date if not.
    I hope that clarifies everything!

  • Is there a wi-fi capable phone that does not require a data plan.

    I would like to upgrade the 4th number of my family plan with a phone capable of doing apps.  My youngest son would love to play games with his phone and text and call.  But, a full fledged data plan would be overkill.  Which phone is app capable without data plan?  Help much appreciated

    You can upgrade your son's line to one of our Basic phones that do not require a data plan. With these phones your son can text, call, and also purchase games.
    Although they do not require a data plan we do recommend one if he will be accessing data when purchasing and downloading games and other applications. Without a data plan you will be billed $1.99 per megabyte used. 
    If he will be accessing data occasionally then I would recommend the $10.00 data plan which will allow him 75 MB per month. Click here to view other available data plans.

  • How to generate XML data from Lotus Notes to migrate to SharePoint by passing XML to SharePoint.?

    How to generate XML data from Lotus Notes to migrate to SharePoint by passing XML to SharePoint.?
    Ramesh S

    You could use XMLQuery to return the data from your tables as XML, that would give you a CLOB.
    An example using the SCOTT schema might be like this:
    SELECT XMLQuery(
             'for $i in ora:view("DEPT")/ROW
              return <Department dname="{$i/DNAME}">
                     <Employee>
                       {for $j in ora:view("EMP")/ROW
                        where $j/DEPTNO eq $i/DEPTNO
                        return ($j/ENAME, $j/JOB, $j/SAL)}
                     </Employee>
                     </Department>'
             RETURNING CONTENT) FROM DUAL;In the docs you can find more information about its use:
    http://download.oracle.com/docs/cd/E11882_01/appdev.112/e10492/xdb_xquery.htm

Maybe you are looking for