P Pavilion dv5 1004nr just went black, will not turn on.

HP Pavilion dv5 1004nr just went black, will not turn on. Just flashes three times when start is pushed.

Hi @RKJohansen, 
Welcome to the HP Forums!
It is a terrific place to find answers.
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I grasp that when you power on the notebook it flashes 3 times but does not boot to Windows.  Here is a link to Computer does not start and the LEDs blink or the computer beeps that will help you determine the cause.  
Here is a link to the  HP Pavilion dv5 Entertainment PC Maintenance and Service Guide
which will provide you the unnecessary part numbers if you should require any replacement parts.
Good Luck !
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Similar Messages

  • My ipod went black will not turn on and the home button wont work what do i do?

    i need help!!!!!

    Make sure it's charged.
    Try to Reset your device:
        Press and hold both the Sleep/Wake button and the Home button for at least ten seconds, until the Apple logo appears (ignore the Slide to Power Off option that shows up first).

  • HT201263 iphone went dark, will not turn back on.   it died at end of a call. plenty of battery power.  holding the power and memory key for any amount of time does not solve anything?

    iphone went dark. will not turn on. died at end of a call.  tried the power/home holding option.. no good.  had plenty of power.  when plugged into computer
    nothing changes... its not acknowledged by computer, iphone doesnt charge.. etc... appears completely dead

    If a reset didn't work & you're sure the battery is charged, make an appointment at an Apple store.

  • HT4993 my phone just went black and wont turn on

    My phone was fully charged and then the screen went completely black.  I have tried to do the hard reset however that does not work.  Any suggestions to fix before I head into the apple store

    Hi Rebeccarichmond,
    Thanks for visiting Apple Support Communities.
    If your iPhone does not turn on, these steps can help:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    Best,
    Jeremy

  • HP Pavilion 23 All-in-One PC will not turn on

    Was away this weekend, before leaving on Friday I updated my computer and then shut it down. When I returned today it will not turn on. I have disconnected it and reconnected everything and still no luck. It was plugged into a sugre protector but no significant weather that would have caused issues. Electricity did not go off over the weekend. I have no idea what could be wrong. I just bought this computer in March of this year. Any suggestions or ideas?

    Hello @Harold-N-Tville,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand that after running some updates and turning your computer off for the weekend your HP Pavilion 23 All-In-One Desktop PC will not start. I would ensure that you try your computer plugged directly into the wall and if still does not work please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html. Given how new your computer is you want to ensure that any issues are properly documented and dealt with.
    I would like to thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • My iphone 5 just died and will not turn on or give any sign of life even when plugged in. i tried to press the lock and home buttons. no responce and i also plugged it into my lap top for i tunes. no responce. need help soon.

    need help. my iphone died and will not turn on. its been plugged in for a hour and nothing.
    i plugged it into my lap top. nothing
    i played with the buttons. nothing
    i cleaned the charger port . nothing

    Assuming your iPhone is well charged, place it in recovery mode as described here.  You may have to try this more than once to succeed.
    http://support.apple.com/kb/HT1808

  • HT4061 My IPad air went black, will not startup or shutdown

    My IPad air went blank I cannot shut it down or start it up.  Need help?

    Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • My HP pavilion G7 laptop running windows 8 will not turn on

    I had my laptop on sleep. Could not get it to wake up, so I turned it off.  Now it will not come back on. I have unplugged it plus took battery out.  Left it over night. Held down the on button and hit f10, nothing...  ( 

    Hi sweetmag52,
    I see that you are having some problems powering up your laptop. It is going to be hard to diagnose the problem if we can't get it to turn back on. Is the Num or Caps Lock key flashing at all? If, so how many flashes? Do you hear the fan or the hard drive start at all? How long have you had the Pavilion? What is your product number?
    Find your product number on a notebook:
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c00033108
    Thank you,
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • My iphone 5s screen just went black and wont turn back on

    I cracked my screen about a month ago and just today the screen started changing colors and then went completely black. I have it plugged in now and it just keeps vibrating but the screen wont come on.. I've tried to hold down the home button and power button but nothing is working.

    You will need to get it serviced.

  • I reset my I reset my IPad2 and it is just spinning and will not turn on.

    I reset my Ipad2 and it won't tun on.  The little circle in the middle just keeps turning.

    Reset it like this?
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • HP Pavilion Laptop has burning smell and will not turn on or charge

    Last night I plugged in my laptop to charge and the little white charging light came on (everything was normal). I left my laptop at an angle leaned against the wall so it wouldn't get stepped on. In the morning when I tried to turn on my computer nothing happened -- none of the lights came on at all. Even the charging light was out even though the computer was still plugged in. When I unplugged the charger and looked closer both the computer's charging port and the end of the charger smelled like burning plastic. Now when I plug/unplug the charger there is an electrical sounding pop/crackle sound at the charging port. I'm going back to school in a few days so I would really appreciate it if someone could reply soon so I can fix it before classes start. Thank you!

    @emmaneedshelp ,
    I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post personal information (serial numbers and case details).
    If you are unfamiliar with how the Forum's private message capability works, you can learn about that here.
    Thank you for visiting the HP Support Forum.
    I work for HP. However I speak only for myself, not for HP nor anyone else

  • Macbook just went blank and not turning on.

    I have a 2008 Macbook A1278. Last night I was browsing and suddenly my Macbook's screen went blank. My battery is not working so I tried turning off the Mac by holding the power button. Nothing seems to work and it doesn't turn on. I tried resetting the SMC by the steps provided on the support website but even that isn't working. Now when I turn on the Macbook I can feel it working but the display doesn't come and the white light doesn't come either at all. I tried going through every possible solution available online but nothing seems to work. Help is required. This Macbook of mine is very essential as I work on it.

    Nothing seems to work and it doesn't turn on.
    Might be the adapter >  Apple Portables: Troubleshooting MagSafe adapters
    If it's not the adapter, might be something you haven't tried here >  Troubleshooting: My computer won't turn on

  • IPad just stopped working; will not turn on

    My iPad has suddenly stopped working. I picked it up this morning to read one of my newspaper apps and it won't turn on. The screen is completely blank. It was working normally last night. I thought maybe the battery had run out so I plugged it is to recharge but it still would not turn on. Do you think it might be the battery? I bought it in July. Thought the battery would last longer than that.

    Thank HEAVENS!!!! I was crying about my ipad, i have done so much to protect it and as i'm walking out of class to my car (my ipad worked during my entire class) i pull it out of its carrying case and push the home button and NOTHING! but the power and home button for 10 seconds, i'm so happy!!! I'm crying tears of joy right now as my BABY IS BACK!!!!! Now i'll be babying my 64GB wifi + 3g ipad even more she's not even a year old!!! I am so glad that i found this post in the apple discussion section. BLESS YOU!!! But how strange that this happened almost 10 days apart from yours doing the same thing. What's going on apple?

  • My iphone 4 just went black?

    my iphone4 just went black & would not charge up after plugging in electrical outlet; what do i need to do?

    Same reasons your computer crashes. And it's the same thing. Don't think of it as a phone; think of it as a pocket-sized computer that can also make phone calls.

  • My laptop screen when black now it will not turn on or off. And is there a way to see everything that has been done to my laptop at a apple store?

    My laptop has been in the apple store to be fixed more times in the past 2 years then you could imagine. They just replaced a defective wire in it, and hardrive not even a month ago and now the screen just went black and wont turn back on. Also is there a way to see everything that has been done to this laptop through the apple store?

    If I were you I would call Apple Customer Relations (800) 767-2775.  Tell them exactly what you stated in your post in a polite way.  See what they can do for you.
    Nickc111209 wrote:
    is there a way to see everything that has been done to this laptop through the apple store?
    Yes.  And also on Apple's repair history website.

Maybe you are looking for

  • Open Qty and Delivered Qty  remains same even after Return

    Hello After making return, the open qty remains the same and its not reflecting the return qty. for e.g. I have made a Sale Order of 100 qty I delivered 20 In sales order my Delivered Qty is 20 and Open qty is 80 Now I made a Return of above 20 Qty B

  • Cacellation of service entry sheet

    i ve prepared a service entry sheet for which i ve made the payments to the endor, can still cancel the order after the payment has been made

  • Http - iDoc scenario - ID

    Hi, HTTP - XI - iDOC  is my scenario..... i am facing problem in iDoc adapter... the error category is idoc adapter and the error id is "ATTRIBUTE_INV_SND_SERV" Which RFC destination and port should in mention in Communication Channel? Either the rec

  • How to output a checkbox in Smartform?

    Does anybody know how to output a boolean as a checkbox in Smartform. I looked at the online help but found nothing about this. Thanks.

  • Having issues with Compressor and my footage looking pixelated..

    Compressed a wedding video through Compressor (from Final Cut Pro). When I have it in DVD Studio Pro and look at the footage, there is a minute or two where the footage looks pixelated and is almost vibrating. There is no issue when I go back and loo