P1100w has lost its wireless and now only prints by attaching a cable from my laptop.

My HP Laserjet Pro P1100w was working fine in wireless mode, until one day the paper became jammed and I pulled it through the printer to release it.  Since then I cannot get it to work wirelessly and now have to use a cable from the usb port.
Any ideas or help would be appreciated.

Is the wireless light solid or flashing?
Hold the cancel button and it should print a configuration page.  Does it have any valid IP information listed or does it have a 169.254.X.X IP address listed?
I did not find a p1100w in consumer support, but I did find a p1102w printer.  Is this a p1102w model printer?
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Similar Messages

  • I purchased an Ipad mini in Thailand in first week of July. Now the screen of the ipad has lost its brightness and smells like somethings burning inside when switched on. I am in Dubai now and want to know if I can have it exchanged here in Dubai?

    I purchased an Ipad mini in Thailand in first week of July. Now the screen of the ipad has lost its brightness and smells like somethings burning inside when switched on. I am in Dubai now and want to know if I can have it exchanged here in Dubai?

    Contact support and ask them. http://www.apple.com/support/contact/

  • My computer has lost its sound and audio? how can i get it ?

    My laptop has lost its sound and audio. I dont know how to fix it. help me please.

    It's not lost. It's never there. FaceTime icon is only present in ipad and ipod touch. You can use FaceTime right of Messages. check this link out : http://iphone-and-i.blogspot.com/2012/01/how-to-activate-facetime-in-iphone-4s.h tml

  • Dymob 450 Turbo labelwriter changes page widths and now only prints webpages as labels

    I am running 3.6.8 on a pc-based desktop.
    I print using a brother 2100 laser printer.
    I installed dymo 450 turbo labelwriter yesterday.
    I tried to print a webpage using firefox and it has truncated the page to the width of the labelwriter.
    I've gone in and changed the printer margins in firefox, have reduced the scale and it still will only print 1 1/8" X 3.5" size sections.
    I'm positive that I've selected the brother printer to print, not the dymo printer.

    Shiva,
    As I mentioned earlier, the reason we printed on A4 is to check if it is printed properly - margins on the top, right, left etc. And it printed fine.
    So when I speak about the actual problem it's on the label printer. The label printer seem to take extra margin on the top. That's exactly the issue I am facing now. I just came across the following thread which talks about a similar issue. May be I need to check the label type defined in the drivers.
    Printing on Dymo LabelWriter 400
    Any inputs?
    Thanks,
    Anil

  • HELP!! ipod mini has lost its songs and pc wont recognise it

    I've turned my ipod mini on today after not using it for a week. I plugged it in to the pc via the usb cable and itunes popped up as usual. My ipod wasn't on the source list and a box appeared saying that itunes didn't recognise my ipod and I had to go to software updater to reset it. There was no frowny face or all the other icons that appear when there's a problem. All the songs and folders I had on the ipod had disappeared even though they were still on itunes. After spending almost 2hrs downloading the new version and updater (dial-up) it still didn't recognise it.
    I tried to reset it but got the message "ipod updater...... can't install firmware on connected ipod. The ipod's hardware and the updater firmware are not compatible".
    I've done held the menu and select button to restore factory settings etc and its still the same.
    It's constantly charging whilst plugged in and nothing I do will get my songs back on the ipod.
    It was fine a week ago when I last used it and can't understand where all the gremlins have appeared from. No one else has used it.
    Someone out there please help.

    How were you able to plug in your iPod, your iTunes opened because of it but then it says it didn't recognize it? LOL Funny..
    iPod not recognized by iTunes
    http://docs.info.apple.com/article.html?artnum=61771

  • My iphone 6 plus  lost its colors and shows only grey colors

    I reset it to manufacturer settings and it seems to solve the problem (the battery sign was green) but when I restored my setting and content from iTunes it went grey again. I looked through all my settings and I can't find something that fixes it, including the greyscale button.

    have you by any chance checked in settings->general->Acessibility
    if it's set to display in b&w on purpose ?

  • I am on PC, Windows 7, Graduated filter in LR5 has lost its pin, and Grid lines. Also no done button. Any ideas?

    Any help much appreciated

    To get 'Done' back, hit the T key.
    To get your pin back, hit the H key.
    Hal

  • The glue on my top case has lost its adhesive properties

    the glue at the bottom of the rear section of my top case has lost is adhesion and now when i go to shut my screen the aluminum lifts but the screen stays in the position... i have read of this problem with other mbp's has anyone had theres repaired...

    Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.
    They will examine your iPad and explain your options. There is an out of warranty replacement program that may be offered to you. That will provide a replacement iPad of the same model at a reduced cost. Given it's an iPad 2 however it might be better to consider other alternatives such as a refurbished iPad or and iPad with retina display which is presently the lowest cost new iPad available.

  • My psc2115 only prints a blank page except from toolbox in diag mode

    hi any one with an suggestions please, i have a psc 2115 all in one it goes through the motions for printing but only prints a blank page except from the laptop on a network share,  iv tried new drivers, tried microsoft fixit, tried the hp diag software, still not working, its just printing a plain page, in print preview it shows the page that its gonna print then prints a plain page. tried all the hp support and the MS technet and it still dosent work , on the network share it only works from the wifes laptop (win 7) it prints ok. on my workstation (xp pro) it prints from the toolbox diag screen it will print a diag test page. ive un-installed and reinstalled the driver iv rest factory settings, im out of ideas fro the moment, any ideas please

    Hello Burnhug 54,
    Thanks for the post.  With this one, I've included a document below that should assist with this one.  It was some very good basic t-shooting tips.  If after going through these steps, you are still getting blank pages, then be sure to check your driver from control panel and from one of your applications.  Ensure that it is indeed the PSC2115.  Good Luck!
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01892627&cc=us&dlc=en&lc=en&product=91430&tmp_t...
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=buu05210&tmp_task=solveCategory&cc=us&dlc=en&lan...
    I worked for HP but my posts and replies are my own....Thank you!
    *Say thanks by clicking the *Kudos!* which is on the left*
    *Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

  • "Disk Utility has lost its connection with the Disk Management Tool and cannot continue. Please quit and relaunch Disk Utility."  Trying to format my iomega external HD for use with Mac

    Hi. Trying to connect iomega ext. HD. i have to reformat for Mac. When i plug in & go to Disk Utility,the external shows up and i'm supposed to click "partition". When i do, a box comes up saying ""Disk Utility has lost its connection with the Disk Management Tool and cannot continue. Please quit and relaunch Disk Utility." I quit and relaunched, same results. After googling my question, i came up with this:
    "Disk Utility has lost its connection with the Disk Management Tool and cannot continue. Please quit and relaunch Disk Utility."
    (Quitting and reopening Disk Utility does not help.)
    The following also appears in Console log:
    *** malloc[419]: Deallocation of a pointer not malloced: 0x290a410; This could be a double free(), or free() called with the middle of an allocated block; Try setting environment variable MallocHelp to see tools to help debug : for architecture i386 object: ./Applications/iTunes.app/Contents/MacOS/iTunes malformed object (unknown flavor for flavor number 0 in LC_UNIXTHREAD command 27 can't byte swap it)
    Workaround
    Quit Disk Utility.
    From the Finder's Go menu, choose Go to Folder....
    Type the following, then click OK: /Library/Receipts
    Temporarily remove these iTunes receipts from /Library/Receipts (sort the folder alphabetically as a list):
    iTunes.pkg
    iTunes4.pkg
    You can put them on the desktop, for example. Do not remove iTunesX.pkg or iTunes Phone Driver.pkg.
    Open Disk Utility and repair disk permissions again.
    Quit Disk Utility.
    Put the removed iTunes receipts back in /Library/Receipts.
    Note: This issue does not affect Disk Utility's verify or repair disk features.
    All seemed good, for a moment, until, upon going back to Disk Utility after removing itunes4.pkg and putting on desktop (i did not have itunes.pkg to remove) the same thing was happening. When i highlite my iomega ext. on left of page, disk perrmissions is grayed and does not allow me to click on it. Same problem from the start. Can somebody please help me out here? That would soooo awesome. Thanx!

    i'm just scared i will do something wrong on my own and lose my data.
    You shouldn't be scared of that, because you should already have backups. If you don't have backups, then backing up is the first priority.
    Insert the Snow Leopard DVD and restart. When you hear the chime, hold down the C key and keep holding it until the Apple logo appears on the display. You should now see the language selection screen. Select your language, then choose Utilities > Disk Utility from the menu bar. In the Disk Utility window, select the external drive (not the internal). The drive may already have a data partition, in which case there will be another icon below the drive icon. Choose the drive icon, then select the Partition tab. Create a single partition with the default options (GUID partition table, Mac OS X Extended Journaled).
    When the partitioning is done, select the startup volume on your internal drive in the DU window. Select the Restore tab. Drag the icon of the startup volume to the "Source" field. Then drag the icon of the newly-created volume on the external drive to the "Destination" field. Make sure you have this right. Then click the Restore button, and the data on your startup volume will be copied to the external drive.

  • MacBook Airport card has lost its IP address and won't connect to my network

    The Airport card on my MacBook has lost its IP address and will not connect to my network. It worked fine until about two or three days ago. Network Diagnostics says that the Airport now has a self-assigned IP number and will not connect to the Internet. I can't find any info anywhere that tells me how to restore the IP number, and I don't get how it can have a self-assigned number and not connect. I have AT&T U-Verse, and my iMac desktop and two iPhone 4s connect with little difficulty. The MacBook is three years old, and AppleCare just expired two months ago. I'm still running 10.6.8 on both machines. I found an article saying that sometimes DHCP leases expire, but my desktop still works ifne, and I've had both connected to the same network since the same time. The artcicle said that more than one machine can share an IP address, so I wanted to try to enter the desktop IP address into the laptop, but I can't find a way to do so, either. Any thoughts?

    Have you tried making a New Location for each yet? The Automatic one get confused easily.
    Some "nix" to try when it happens also...
    sudo ipconfig set en1 BOOTP;sudo ipconfig set en1 DHCP
    sudo ifconfig en1 down;sudo ifconfig en1 up
    Sometimes having an all OFF Location can help, thanks to Gnarlodious...
    http://gnarlodious.com/Computer/MacOsx/WiFi

  • First generation apple tv has lost its main menu bar on top of screen.  Also I am currently in language choice and my remote seems to be locked, is that possible and if so how do you unlock it?

    first generation apple tv has lost its main menu bar on top of screen.  Also I am currently in language choice and my remote seems to be locked, is that possible and if so how do you unlock it?

    You would need to go to an Apple Store (make an appointment) and take the phone, her father's original invoice when the phone was purchased, and a copy of his death certificate. Only with these will Apple unlock it. If you can't get these, the phone is permanently unusable.

  • Photosmart wireless B110 printer has lost its connection with my desktop PC.

    My Photosmart wireless B110 printer has lost its connection with my desktop PC. I can still print from my laptop so I know the printer is working fine.
    When I check ink levels through 'Printer Proerties' the message I get is 'The computer is unable to establish two-way communication with the device', so I guess this is a clue. I would appreciate any help you can give. 
    THank you.

    Just as a preliminary step, we're going to go through a complete and clean uninstallation and reinstallation. First if you use a USB cord, make sure to remove it. Do not plug it back in until the software directs you to. Then go through the Devices and Printers, Programs and Features and Device Manager folders and insure that all copies, files, and programs related to the printer are removed. Then as directed, restart the computer. 
    In the START menu type "%temp%" and press ENTER. Here I want you to press Ctrl+A and hit DELETE. Some of the files will not allow you to delete them, skip those files and delete the majority that allows it. 
    Then follow this link to download the full feature software and drivers for the printer (be sure to select your correct OS): 
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&product=4022343
    Install that and let me know the result! 
    Have a great day!

  • My iphone 4 has lost its software. itunes keeps saying it wont detect my iphone 4 and the iphone keeps saying connect to itunes. how do i fix this?

    my iphone 4 has lost its software. itunes keeps saying it wont detect my iphone 4 and the iphone keeps saying connect to itunes. how do i fix this?

    Place the device in DFU mode and restore.

  • I have lost my calendar and now I cannot add events to it.  I keep getting cannot save event no calendar has been set.

    I have lost my calendar and now I cannot add events to it.  I keep getting message "cannot save event no calendar has been set."

    Maybe you need to Tap the Calendar Button in the upper left corner of the calendar app and select a calendar in which to add the event.
    Do you have. + sign in the lower right corner of the App? If not go to Settings>iCloud>Calendar>On. If you want to sync the calendar with iCloud, leave it set to on. If not, then set it to Off.
    Or try this of those suggestions don't work.
    Close all app scompletely and reboot the iPad. Go to the home screen first by tapping the home button. Double tap the home button and the recents tray will appear with all of your recent apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Maybe you are looking for