P1102 will not work as RDP printer

P1102 will not print as redirected printer on Windows Server R2 Standard SP1 X64 terminal server.
We have downloaded latest 2008 x64 driver but will not work.
P1102 local network printers will print from network but not as RDP printers from the same terminal.
Tried to instal the P1102 on the actual Server itself but it will not instal as a USB printer on the server?

You have a lot of learning to do. The overlap between interactive PDF and
DPS is not all that great. Start with the DPS help here on Adobe.com and
download Bob Bringhurst's DPS Tips app in the app store.

Similar Messages

I upgraded to OS X10.9.4 and now my Cannon scanner will not work. I downloaded the new driver and still no luck.

I upgraded to OS X10.9.4 and now my Cannon MX 860 scanner will not work. The printer works. I downloaded the new driver and still no luck. Please help!

Open Print & Scan preferences. Select the printer in the sidebar list and click on the Delete [-] button. CTRL- or RIGHT-click in the sidebar area and select Reset Print System from the context menu. Re-Add the printer by clicking on the Add [+] button, select your printer from the little browser that opens, select the proper driver if it isn't set automatically, then click on the Add button. See if it now works.
Oh, be sure you install the new driver you downloaded.
BTW, you don't have a PowerMac as shown in your profile. PowerMacs were tower machines that ran PPC processors, not Intel processors. You really should correct that information in your profile.

Printer will not work after update to Mavericks

I have a macbook pro and an HP7280 printer connected wirelessly. After upgrading to Mavericks the printer will not work. The first time I used it the system upgraded automatically (I forget what it said but it just went ahead and did some upgrading) When I clicked on something to print it did recognized the printer but just scrolled and scrolled and never printed. So I deleted the printer and reset the system and then added the printer back on - same thing. Any ideas??

It means there is no issue with the driver you are using and with it working correctly on Mavericks. So you have a network issue with the printer queue you are using. Normally a reset of the printing system and re-adding the printer would be enough to get things working again. But since you have done this and your issue is not resolved, there must be some other gremlins in the system.
With the HP connected to the network, if you know its IP address you can enter this as a URL into a web browser. This should result in you connecting to the internal web page of the HP. Does this work?

HP-2840 needs new drum (Q3964A) and I am told my printer will not work when I install a new drum

My HP2840 laser jet All-InOne has been telling me for 6 months that I need a new drum. I was waiting until I saw an issue with my print quality (which I never had a problem) and now my printer will not work unless I replace the drum.
A friend told me that even after installing a new OEM drum, that my printer will still not work unless I call HP and pay for them to tell me how to make it work.
Is that true?
I need help fast cause now my wife is really angry that I "broke" the printer!
Thanks in advance!

mmcnel01 wrote:
Is this an official HP forum?
If so, is there anyone from HP - maybe a moderator or someone, that will respond to my question?
This is a user to user forum and is not an official link to HP support. I would suggest that you contact HP as shown here.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Printer will not work: error code 0xc19a0022

Printer will not work: error code 0xc19a0022

Hello citizenED,
Welcome to the HP Forums.
I see that you are getting the error code " 0xc19a0022 " .
I do have a few steps that we can try.
First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
I have also located a document that deals with a 'Problem with Printhead,' 'Printer Failure,' 'Ink System Failure,' or a '0x...' or a 'C2...' Error ...
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Since upgrading to OS X yosemite my printer will not work.

Since upgrading to OS X Yosemite my printer will not work.

I found the solution in another thread. Thanks to frankglyn who posted it there.
I've just copied it here, as this seems to be the most active thread on this subject.
The solution (steps A to C) worked fine for me and others and should work for you as well, until Kodak will come with an updated driver. Then, you can revert the changes as also described below (steps 1 to 7)
A) in Spotlight Type Terminal and then press enter.
This should bring up the terminal window/program.
B) In the Terminal type sudo sh -c 'echo "Sandboxing Relaxed" >> /etc/cups/cups-files.conf'
It will ask for your password.
C) After that type following: sudo launchctl stop org.cups.cupsd
After that if you are lucky the printer driver should start to work. (which it did in my case)
I hope this works out for you, if not then you can do following to revert the changes:
In case you want/have to revert the changes:
1) Open the terminal as usual (Spotlight type Terminal hit enter and wait for the terminal window to appear)
2) then type: cd /etc/cups
3) then type: sudo nano cups-files.conf
4) 'type in your password'
This brings up a command line editor which you can use to edit the file
5) Remove the last line which says Sandboxing Relaxed
6) press 'ctrl x'
And then confirm with y when being asked if you want to save the changes
7) after that type sudo launchctl start org.cups.cupsd

I upgraded from leopard to lion and my epson printer will not work. I get a communication error

I upgraded from leopard to lion and my Epson printer will not work. I get a error message comunication error. What can Ido to fix this I bought a new USB cord and it did no good.

I suddenly had the same thing happen. I've had my new iMac for 3 months and at first my Epson Artisan 50 worked okay then yesterday I started getting the same error message other people on this support site have gotten. I tried ALL the advice given (deleating the Epson files from the library folder, etc. reinstalling older software) and nothing worked. With the newest iMac (and operating system) you cannot pick and choose which version of Epson software you want. You must use the 10.8 version or it simply will not open when you've downloaded it. Finally I found the comment above by den.thed and tried the OS X Mountain Lion: Reset the printing system suggested. As much as I hated to lose all my printing presets that took a lot of expiermentation to set up, I was desperate. I tried it and it worked. Now I just have to consult my old computer and try to recreate all my printing set ups. So to others with Epson / Apple 10.8 issues this may help when everything else fails. Thanks den.thed for your advice.

We set up Airprint to our Xerox machine but we have codes set up so each department has to enter their code in before they print. Airprint will not work because we have the codes. Does any one know if there is a way to override this?

Hello there-
Our Xerox rep helped us set up Airprint to our copier machine. We have department codes set up on our copier so when any one goes to copy or print something they need to punch their code in. Airprint will not work because we have those codes (something prints out to the copier saying error due to accounting codes being set up). Does anyone know if there is a way to override this on our ipads? Thank you!!

Hi Nico,
if you want a local test/development setup of Oracle why don't you just install Oracle 11gR2 XE (http://www.oracle.com/technetwork/products/express-edition/downloads/index.html) ?
If you install this you get a database, APEX (4.1), client etc all in one install, this includes a webserver (EPG) on port 8080 without having to configure anything. It's a simple next-next-next installation without much configuration.
If you would like to seperate database and software you can always do this later when you understand the concepts of database/control files etc.
If you would like to upgrade to APEX 4.2 you can download this afterwards and easily install this by running two scripts in SQL*Plus ( apexins.sql and apxldimg.sql ), just check the apex 4.2 installtion guid section EPG for this.
Regards
Bas
b.t.w. If you're running windows 7 - 64 bits just use the 32 bits XE for windows, might get some warnings but you should be able to install and run, good enough for test/dev

After upgrading to maverick my epson WF-2540 scanner will not work. There are no upgrades showing so what do I do?

After I upgraded to Maverick my Epson WF-2504 scanner will not work. There is no software update showing necessary either. I have gone to the Epson website but it doesn't offer a download. It tells me to go to "software update" ??? Any suggestions?

Thanks Arthur,
I was hoping for a good bubble bursting, but I tried that HP "update" as soon as my printer stopped responding. I really really wanted my bubble popped.
One needs the Apple supplied driver for this work. It will not work because the driver to basically function on the updated Mavericks is not supplied by Apple Updates, so the HP driver that stops printing an extra page is rendered useless. I spent, wasted two days going back and forth between Support threads, HP chat and on the phone, through all the Mac channels where I was told that the 2011 HP was antique. HP said Apple had the drivers. So, they pointed a finger at one another with this unlucky customer caught in the crossfire. HP said Mac did it and Mac said HP did it. BOOM ! goes the guy in between who spent a good bit of money to have good equipment. What is wrong with expecting a printer to last beyond 3 years, or for a back up drive to last more than 3 years?
I do appreciate the attempt to help though. It was here in Discussions where I was guided to the gimp driver, drivers which in the past always worked when needed but in this case something wicked about Mavericks prevents it from working. No matter how many times HP says it works on their site all you have to do is try and then speak with customer service to find out that in a parellel universe this may logically hold. It does not hold here. If it were the case that by working in Lion it would work in Mavericks then there must be something wrong with me. But why, APPLE, is it that one day it works, do the update and then it does not when Lion was the previous OS? I did Everything, every single thing recommended by people who had good ideas and wanted to help but all too often the facts tell us nothing of the world. Facts are tools used to decieve, the world is where it works or does not work and in this case Mavericks has cost me close to $300. Probably not a big deal in some cases, but money is money. When it is gone it is gone.
I followed the complete uninstall, going into library and removing all HP, then restarting and lo and behold HP driver for 4500 not only was not present but along the way my 500gig back up drive died, as in dead, nothing.
Of course I will not buy another HP product. If you go to the list of drivers Mac says it carries the HP Officejet 4500 wireless may be present but is not carried by Apple. I have tried Apple update over and over. What I have done is wasted my time and money. In one fell update I lost a printer and a back up drive. No storms, no loss of electricity, no boogie men lurking, no malware, no gremlins, nothing but an innocent customer updating when Apple said "update". Sure it is serendipity that both my printer and back up drive died on the same day at the same time following the Mavericks update. Who am I but a loyal customer? I must be stupid because my equipment stopped responding after the update. It is not new that there are bugs and glitches following updates. I was a beta tester for OS X, it wiped my computer clean, but I understood, it was beta.
A friend told me the same about planned obsolescence in that since printers are cheap and ink is expensive they don't really care about customer satisfaction. Three years old is antique, out of date. We should and must all be angered by this hatred for the customer shown by manufacturers across the board. Blaming the customer is ridiculous and absurd but not unheard of, in fact it has become the rule of thumb from the other side. The customer is innocent. All we want is to buy premium equipment and to have it behave in a manner befitting the cost. I am an Apple user since 1994. I designed a restaurant on a 333 mhz black and white Mac. You know, the big floppy disc one. I am not new to Apple. Fiercely loyal for 20 years. This is the most angered I have been by the flippant attitude shown to us all.
Thank you for giving the links and hopeful advice. I tried them all when I first had the troubles. The good people in discussions, not the Apple plants, but the users, tried their best. I thought that by coming back later there would be updates and new links that would help. But no. Maybe one day. HP lost a customer, it means nothing to any of the manufacturers when a customer is ridiculed by their cynical attitude towards the customer. Maybe there will be someone else to come along here that has had similar experiences and found a way to fix. Used to be a gimp driver could do the trick. Used to be a way. I fear we lose control of our equipment more and more every day. This is not a rant. It is a somewhat sad expression of having been ripped off. Discussions here have helped in the past but the more things advance the less we matter. And as in the past when I was mad about an Apple failure a member sent a fix and I printed the fix for others to use in return. We help one another in the best of ways. Please spread the word, maybe there will be a fix to show up here sometime. I kissed my iOmega back up drive and the 500 gigs of writings, photos, backups and music goodbye, gone forever, poof! But the HP printer is still here on my desk. I don't want to give up hope.

My hp laserjet m2727nf will not work until i shut off power and power back on.

My laserjet will not work until i power off then power on after every printing job. It first started happening over the weekend when it sat idle for 2 days. Then it was once a day and now every time i need to print. What could be the problem?

So i didn't read anything about the suggestion about the configuration report?
I would recommand turning off wireless (if it has it), unplugging usb, unplugging network cable, unplugging fax cable. Then i would reboot the printer go to the Menu and in Reports try to print a "Configuration Report".
If it still doesn't print i would unfortunately then may be try resetting it back to factory default. perhaps there is some setting that is causing this issue. Also causes printer to fully reinitialize itself. There should be a button in the menu and setup to set back to defaults.
Let me know if any of that helps and what the results of trying to print an internal report are.
I am an HP Employee.

Perifials will not work with Windows 7

I have a new HP h8 1214 PC WiFi with Windows 7 installed. My old HP ScanJet 4850 and my HP Personal Media Driove 1600 will not install. My previous operating system was XP.
I would like to install the ScanJet 4850 because it can send slides and film strips to my computer to be used in a slide show with Adobe Photoshop Elements and Adobe Premiere. I have started a slide show of these items and did not get all of the slides transferred before my old computer conked out.
I would like to use my Personal Media Drive for backup and it also has pictures I would like to be able to obtain.
I don't know if perifials that are not WiFi will install on a WiFi computer. Apparently not!
Any help will be greatly appreciated,
flyingjewel

The reason the CD will not work is evident. The CD is for Windows 98, XP Home or XP Professional.
The WIN 7 64bit downloaded driver file is what you need. Download and install the driver.
Here is a link ( see pg 5 and 11) that discussed the power supply for a PMD drive, your's may vary. But you must have a power supply (modular plug with cord), or brick/adapter (has AC cord into power supply, then another cord that supplies DC).
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

Windows 7 64 bit OS will not install any HP print drivers

My HP Pavilion p7-1297cb pc which is running windows 7 home premium 64 bit OS will not install any HP print drivers. All my windows updates are current, HP print and scan doctor did not fix it, I also tried MS fix it manager and did not work. When I try to use my HP Officejet Pro 8500A Plus installation CD or HP's download center, software almost installs, but says print drivers will not install. Also, I tried using USB connection and windows tries to install software, but does not work. Same for HP print driver support. I tried installing 3 different HP printers I had and all had the same issue. Any ideas on why my system will not allow any print drivers to install?

Hi rrfhp,
Welcome to the HP Forums, I hope you enjoy your experience!
I understand none of the HP drivers will fully install.
I will be happy to help you.
Are you signed in as the Administrator of the computer?
I would turn off all start up programs to make sure there isn't something blocking the printer.
Click on start, in the search box type in run, enter, then type in msconfig, click OK.
Click the Services tab.
Click to select the Hide All Microsoft Services check box.
Click Disable All, and then click OK.
Then click on the start up tab at the top.
Click on disable all.
Reboot the computer.
Temporarily turn off any Antivirus software.
Then run the installation again by right clicking on the setup and selecting run as Admininstrator.
Don't connect the USB cable until prompted.
Try printing now.
Then go back into msconfig and enable the All Microsoft Services and enable all on the start up tab.
Turn the Antivirus software back on again.
Please let me know the results if you are still having issues.
Are you getting any error messages?
Thank you for posting on the HP Forums.
Have a nice day!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP Solution Center Software ungrad to Windows 7, will not set up the printer in software

After upgrading from Windows Vista to Windows 7. This was a clean reinstall of Windows Vista and then the upgrade was in stalled. I downloaded the new version of the HP Solution Center full and set it up in my computer.
The printer is HP Officejet Pro L7580 and I have set up the print in my control panel as wireless connection and my wireless software for has been upgraded for Windows 7 and the printer is properly connected and printing.
However when I try to set up my printer in the HP Solution Software it will not set up as a wireless connection for my computer.
Does anyone know how to solve this problem?

I get printer c8100 series will not work scanner at hp solution center. Please help me out?

Webutil.host.HostBean not found WEBUTIL_HOST.execute will not work

Hi everyone:
I've got a form. I've attached webtill.pll and subclassed webutil.olb.
In the WHEN-NEW-FORM-INSTANCE trigger it does:
client_host('cmd /c cd > arch.txt');
When I execute my form I got the errror:
webutil.host.HostBean not found
WEBUTIL_HOST.execute will not work
Could anyone give me some help on it?
Thanks!
Carolina

Hi!
this is what I got in the Java console
JInitiator: Versión 1.3.1.22
Usar versión JRE 1.3.1.22-internal Java HotSpot(TM) Client VM
Directorio local del usuario = C:\Documents and Settings\Administrador
Configuración del delegado: sin delegado
JAR cache enabled
Location: C:\Documents and Settings\Administrador\Oracle Jar Cache
Maximum size: 50 MB
Compression level: 0
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
q: hide console
s: dump system properties
t: dump thread list
x: clear classloader cache
0-5: set trace level to <n>
Loading http://rx26201:7778/forms/java/frmall_jinit.jar from JAR cache
Loading http://rx26201:7778/forms/java/frmwebutil.jar from JAR cache
Loading http://rx26201:7778/forms/java/jacob.jar from JAR cache
Loading http://rx26201:7778/forms/java/dgrImages.jar from JAR cache
proxyHost=null
proxyPort=0
connectMode=HTTP, native.
La versión del applet Forms es: 10.1.2.0
thanks!

Lexmark 1200 Series All in 1 Will not work on my MAC

I recently purchased a Lexmark 1200 series all in one an it will not work. Plug n play doesn't happen so i went through system pref, clicked printer and add printer. It seen it plugged in via usb so i clicked it then it said select drive. The driver for this model isn't there. I did a software update, didn't work so I searched online and cant find anything and neither did the official lexmark site.
Don't know what model mac I have. All I know is its a new mac book so ignore what my OS is.
Thanks

Hi mrburgess187!
Welcome to Apple Discussions.
I went to Lexmark's website and under OS compatibility I didn't see your printer listed for OS X compatibility.
http://www.lexmark.com/lexmark/sequentialem/home/0,6959,204816596666691854_1177082303en,00.html

P1102 will not work as RDP printer

Similar Messages

Maybe you are looking for