P1102w Can't get Installed On Windows 7 Desktop with wireless

My Laser Jet P1102w has worked find with my children's Window 7 laptops. My spouse got a Windows machine desktop with wireless and I cannot get it to work with this printer. I used the disc with the software download. I get to where you plug it into the computer and it does not recognise it at all. I checked the USB ports, it sees the flash drive I plug in. The laptops still see the printer plugged into the USB port. I uninstalled everything, tried the download on line, unistalled everything, tried it all again, unplugged the printer numerous times to reset. Any ideas?
I am adding this later in the day:
I got it to work! I erased all downloads for hp, uninstalled all hp programs, shut down the computer and the printer (also unplugged the printer). Started up the computer, put the driver disc in, selected the network printer option for wifi, reinstalled without plugging in the printer. I am so glad it works finally after hours of working on this. Just wanted to add what worked for any who have this issue.

Hi guys! Had the same issue with a client. Just found the solutions brainstorming (and the red bull helped!!) This is tested on a Windows x64 machine sharing the printer on the network and attempting to connect via a Windows XP machine. The printer has been previously shared amongst other Windows 7 x64 machine successfully.
The solution is to install the HP Universal Printer Driver - PCL5 version on the machine where the printer is connected locally FOR THE SAME PRINTER THUS CREATING A SECOND PRINTER USING THE UNVERSAL DRIVER.
After downloading the file, it will unzip and start the installation. Choose the existing printer using the same port ( it will say ie DOT4 - HP Laserjet 2200). Once it completes, unclick [ ] Set as default and complete the operation. Now go to the Printers listing. Under the HP Lasterjet 2200 printer there should be two printers listed - one using the Windows 7 x64 biut driver and the other using the HP Universal driver
Now, on the Windows XP machine, use the same Universal Printer Drviver and find the printer by browsing the network for the computer. You should see the HP Universal Printer. Select it and continue with the installation. Once completed, print a test page. PRESTO!!!
Hope it works. In the middle of a my runs so if you need more elaboration, give me a bit to answer back.

Similar Messages

How can i get back to windows 8 if i downgrade my laptop to windows 7

My laptop was been downgrade from windows 8 to windows 7because of graphics not funtioning properly. how can i get back to windows 8 again? is there a recovery disc for this?

Hi:
Did you install the correct W7 x64 graphics driver that should work on your model?
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-111285-1&cc=us&dlc=en&lc=en...

I changed permission setting on main disk...took forever now when I bootup I get the chime...apple icon...fan noise...thats it...internal drive is broken...no Mac install disk..I have a windows XP desktop with installation disk..if I was to get external d

I changed permission setting on main disk...took forever now when I bootup I get the chime...apple icon...fan noise...thats it...internal drive is broken...no Mac install disk..I have a windows XP desktop with installation disk..if I was to get external drive ...could I use windows XP styartup disk just to boot the "17"Powerbook-G4...have no intention of downloading XP on the Mac...just want to boot it up...or is there a way to boot the Mac from the XP desktop...cables...etc?

Hi Romko23, just pasted info from manual...PowerBook G4 "17" 5.3
Your PowerBook comes with a minimum of 512 megabytes (MB) of 533
MHz Double Data Rate (DDR2) Synchronous Dynamic Random-Access Memory
(SDRAM) installed. Both memory slots can accept an SDRAM module that meets the
following specifications:
Â Double Data Rate Small Outline Dual Inline Memory Module (DDR SO-DIMM) format
Â 1.25 inch or smaller
Â 512 MB or 1 gigabyte (GB)
Â 200-pin
Â PC2-4200 DDR2 533 MHz Type RAM
PS my keyboad is loose...I tighten the tiny screws...only...once ...tried all the key-strokes...Comand-option..P-R.....safe-mode... etc...Mac only reacted ...once...right after.. I tightend K-board >>C-OpT- P-R...mac chimed twice...the Apple icon in grey screen got smaller....now after trying ...keyboard .boot short cuts 10 times..nothing...it chimes ...grey screen....apple in window...fan noice ....thats it...do you think I need to tighten screws...again,
I actually think when I was changing permissions...on entire it was taking so ong...20 min...I just hit power,,shut it down...when it wasn't done...no patience.,...just thought of something ...sounds important...whern I resgisted on this site..I tried to use my Powrbook login name ..got message.... .. blocked...Secury problem....that has to be the problem..blocked..how do I unblock?
Message was edited by: CMK1

Where can i get a FRESH Windows 8 iso? (LEGALLY)

Hey guys,
I wanted to know where you can get a Windows 8 iso, NOT a upgrade iso.
I already did some googleing, and http://www.redmondpie.com/download-windows-8-iso-x86-x64-file-directly-from-micr osoft/ this website seemed to tell me you can get it by downloading a file from Microsoft and just entering a product Key.
However, for this i think you actually need a Windows 7 , because it is an UPGRADE iso, not a fresh system-builder iso.
So i was wondering, where can you get a fresh Windows 8 iso to install on my MacBook, which doesn't have Windows 7?
Or can you use the iso described in remondpie and use it to install Windows 8?
Thanks!
PS According to many people, the new MAcBook Air (2013) which i have does not work really well when you install windows with a CD. That's why i'm trying to use a USB and iso to download it.

iso is just a 100% bit by bit image of an optical disc
there are millions of free programs which will make an iso file out of an optical disc in a few minuts

How can I get rid of windows 8.1 in my new lenovo and get windows 7 put in?

How can I get rid of Windows 8.1 on my new Lenovo laptop and install Windows 7?

Hi,
I'll assume your laptop was upgraded from Windows 7 to Windows 8.1
1. Start by copying all your personal folders (Documents, Pictures, Music, Videos, Favourites, local databases,
hosts files, etc) into an external disk, DVD, tape, whatever.
2. If I were you, I wouldn't use Windows 8.1 backup tool, I'm not sure Windows 7 Restore applet will be able
to read a Windows 8.1 backup.
3. Check that you have all the necessary licenses, CDs and executables to reinstall your former Windows 7
applications, components, browsers, plugins, Java, .NET Frameworks, etc. Be aware that some applications require
to keep same hostname and/or same IP and/or or same local username (or all of them) as they were on the original
Windows 7 machine.
4. Check that you have your Windows 7 CD and license handy.
5. Do you have a Windows 7 image backup of your laptop (prior to the Windows 8 upgrade)?
5.a Yes? Then restore that image and restore your personal folders on top. You might need to
install or reinstall some of the applications I mentioned on #3
5.b No? You'll have to format your laptop, install Windows 7 from scratch, create your local
user with administrative rights, install SP1, install necessary updates, reinstall all your
applications and finally restore your personal folders.
Sebastian Sajaroff Senior DBA Pharmacies Jean Coutu

Updated Java (13.5) and can't get a Firefox window (mac, 10.6.8)

My MacBook pro suggested I update to the most recent version of Java. after doing so, I can't get a firefox window on opening firefox or on requesting a new window. If I click on a link I get a window.
what'sup?
New java is 13.5 Firefox is 3.6.18 Mac is 10.6.8

If you have access to an Apple Store, the Genius Bar should be able to manually install a version that works with your Operating System.
Be sure to make an appointment though.
AppleCare should be able to help you as well.
You could also try that Express Lane option in the upper right corner of this page:
http://http://www.apple.com/support/iphoto/
Better yet:
http://www.apple.com/support/mac/app-store/

I have hp 430 laptop,how can i re install the windows 7, if i not have original window on my laptop

I have hp 430 laptop,how can i re install the windows 7, if i not have original windows on my laptop. i have oem number,
But i have troubol to finishing installation of window.

Originally the Notebook will have the Recovery Partition and that would give you an option to create a set of Recovery Disk. If you have not created those Recovery Disks when the Notebook was in working condition we cannot do that right now
As of now if you need to recover your Notebook with the new Operating System you can check if the Recovery Partition is in a working condition or not, If yes you can easily recover/restore your Notebook
If Recovery Partition is corrupted
You need to call HP Technical Support and request for a set of Recovery Disks , So you can recover/restore your Notebook at the earliest
OR
You need call up Microsoft and purchase an Operating System with the License Key, So you can recover/restore your Notebook at the earliest
I strongly recommend you to Contact HP Technical Support over the Phone for further assistance without any delay
Hope this helps, for any further queries reply to the post and feel free to join us again
**Click the KUDOS star on left to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thank You,
K N R K
Although I am an HP employee, I am speaking for myself and not for HP

PSE 10 installed on windows 7 desktop and recently updated on windows laptop. now PSE doesn't work on either machine. How can this be fixed?

PSE 10 installed on windows 7 desktop and recently updated on windows laptop. now PSE doesn't work on either machine. How can this be fixed?

uninstall pse 10 (properly using the adobe uninstaller).
clean - Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
then try reinstalling using the adobe installation file(s).
if you see an activation count error while trying to reinstall contact adobe support, https://helpx.adobe.com/contact.html
and ask for an activation count reset.

Is it possible to install oracle developer suite 10g in windows 7(64 bit), I have tried to install but failed so. Though, database 11g gets install in Windows 7. If possible, Kindly provide me the website link.

Is it possible to install oracle developer suite 10g in windows 7(64 bit), I have tried to install but failed so. Though, database 11g gets install in Windows 7.
If possible, Kindly provide me the website link.

Pl do not post duplicates
Is 1GB ram is enough for the installation of oracle developer suite 10g and database 11g??? And which one to install fi…
I want to install oracle database 11g and oracle developer suite 10g (latest) in my system. As i'm quite new to oracle ,…
Continue the discussions in your original threads

I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in to work with Visio

I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in to work with Visio 2013?

For MS Visio (any version) only the appropriate version of Acrobat *PRO* provides PDFMaker for Visio.
For Visio 2013 specifically you must have Acrobat XI Pro (updated to at least 11.0.1).
See:
http://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html
Be well...

How can I get rid of a green box with a white check mark in it this box is covering some of my photos and on the windows icon for firefox.

How can I get rid of a green box with a white check mark in it this box is covering some of my photos and on the windows icon for firefox. edit

When I search for solutions, I find several references to the backup feature of Norton 360. There also were references to MozyHome and McAfee.
http://community.norton.com/t5/Norton-360/Green-check-marks-on-icons-N360/m-p/40982
http://answers.microsoft.com/en-us/windows/forum/windows_xp-pictures/white-check-mark-in-a-green-box/71b70580-b5f1-4336-8d72-71faf1f55cd6

How can I get a small window to open when a link is clicked (AS2)

Hi i,m developing a HTML site and used one animated flash button(AS2) I want a small sized window to open when a user clicks on a button.
The window will contain information that i want to display.It dosnt require a normal 800x600 window to open. I just want a 1/4 size of 800x600 etc. Is this possible and if so how.
I havnt done this before
Thanks
Manoj

HELLO NED,
I WAS RECEIVING MANY MAILS FROM YOU, BUT I DON'T UNDERSTAND WHY DOESN'T RELATED WITH MY PETITION, I SEND
TO YOU AGAIN MY QUESTION, AND IF YOU CAN HELP ME I APPRECIATED VERY MUCH LET ME KNOW.
THIS IS MY QUESTION....."ABOUT DATAGRID AS3
Hello Ned, I appreciate very much your soon answer, I believe you have understand me, but how can I do that? could you give some help? This is part of the code and this is the function that I use
var url: String = "xmls/rests.xml";
var req:URLRequest = new URLRequest(url);
var myLoader:URLLoader = new URLLoader();
myLoader.addEventListener(Event.COMPLETE, completeHandler);
myLoader.load(req);
function completHandler(event:Event):void {
       var myLoader:URLLoader = event.currentTarget as URLLoader;
       var xmlDP:XML = new XML (myLoader.data);
       XML.ignoreWhitespace = true;
       dp = new DataProvider(xmlDP);
       dp = sortOn("name", Array.CASEINSENSITIVE);
       dDg.dataProvider = dp;
       aDg.addEventListener(Event.CHANGE, changeHandler);
       function changeHandler(event:Event): void {
            var thisItem:Object = eve.target.selectedItem;
            descripTa.text = thisItem.description;
            aUI.source = (thisItem.image);
            preloader_mc.visible = true;
My intention is that when a button from a main (swf) loads the swf it displayed the first selected item with a image (UILoader) and the description (TextArea)
Thanks in advance Ned
Joselyn             .................."
THANKS AGAIN NED
REGARDS
JOSELYN
Date: Thu, 13 Oct 2011 07:49:02 -0600
From: [email protected]
To: [email protected]
Subject: How can I get a small window to open when a link is clicked (AS2)
Re: How can I get a small window to open when a link is clicked (AS2) created by Ned Murphy in Flash Pro - General - View the full discussion
Look at the Methods section and choose whichever suits your needs, the first one listed does not.
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/3969302#3969302
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/3969302#3969302. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Flash Pro - General by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Where can I get Install software for a MacBook Pro 2007

Where can I get Install software for a MacBook Pro 2007

Call Apple and see if they have it available and the cost, try 1-800-MY-APPLE

I can't get my ipod touch to sync with my new computer. My old one died. I downloaded itunes and installed music but the ipod will not sync with this new computer. What do I do?

I can't get my ipod touch to sync with my new computer. My old one died. I downloaded itunes and installed music but the ipod will not sync with this new computer. What do I do?

You can only sync with one iTunes library/computer. To switch:
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities

HT201184 how can i get my google window back in the upper right hand corner. It disappeared.

how can I get my google window back in the upper right hand corner of my start page? I seem to have lost it.

Control click in the tool bar area and customize.

P1102w Can't get Installed On Windows 7 Desktop with wireless

Similar Messages

Maybe you are looking for