P1102W wifi connection requires SSID pluss user name and password to connect

Hello Community.
I had investigate how to connect my P1102w printer to the wifi and it is easy but here is the problem.
I have no problem searching with Printer wifi config my WIFI SSID. (usb printer plugged) but My connection requieres when SSID found a user and a password.
I have not find where does the printer have the option to set up my user name and password to login in the needed SSID.
Can sombody help me.
Thanks.

Yes, but the method is to simply connect the TC to the computer by ethernet and use it on a separate network. That is the best way to do it.. but you can also do the same thing better and easier with an external hard disk plugged in. For a desktop computer this is a better solution in a way. You will only be using the TC for Time Machine backups anyway.
If you want to continue to use the TC.. then the actual network settings I put in this thread with a whole series of pictures.
https://discussions.apple.com/thread/4817218?tstart=30
If you cannot follow any of that just ask.

Similar Messages

I cant get my iphone 4 tolog in to my company wifi. i updated to ios 6 and now it just goes to my companies login screen. i enter my username and password and it just sticks. however it will logon to wifi without a requirement for a user name and password

I have to log onto my companies wifi by first going thru a log on page that equires a username and password. before i updated to ios 6. it worked fine now it just goes to the login page and when i hit enter it doesnt do anything just stays stuck on that page. however the phone will log onto a regular wifi router that doesnt require any kind of username or password. any ideas on how to fix it. i have tried everything including reseting all network settings.

1. Settings>General>Reset>Reset Network Settings
or
2. Use "Forget This Network"

My mba when i connect to wifi safari asking for a user name and password, my mba when i connect to wifi safari asking for a user name and password, my mba when i connect to wifi safari asking for a user name and password

i am not able to browse through safari with my wifi connection, its asking for usernsme and password
please help me whath is the issue

You ca n look in the Password Manager.
*Firefox > Preferences > Security: Passwords: "Saved Passwords" > "Show Passwords"
*https://support.mozilla.com/kb/make-firefox-remember-usernames-and-passwords

What is the default user name and password to connect Guest by Console?

HI
at last I have successfully created Guest!!!!
but trouble never leave!!
i isntall tight vnc in the VOVM
now when i am clicking on Console
its launching java , then its giving me a dialog box
Oracle VM login
username
password
when i was creating Guest, it did not ask for any passoword as it used to ask for OVM 2.2
so what password do i have to type ??
thanks for your help
I am nearly there..

Hi,
RTFM: http://download.oracle.com/docs/cd/E20065_01/doc.30/e18549/vm.htm#BABCCHHF
..."You are prompted to enter the login credentials for Oracle VM Manager."...
Regards
Sebastian

How do I connect to Net Flix? I put in my user name and password which work fine with my iMac but not on my Apple TV?

How do I connect to Net Flix? I put in my user name and password which work fine with my iMac but not on my Apple TV?

Can you give me a screenshot of the User Accounts window in Control Panel?
Please create a screenshot by following the guide mentioned at [[How do I create a screenshot of my problem?]].
Once you've done this, attach the saved screenshot file to your forum post by clicking the '''Browse...''' button below the ''Post your reply'' box. You really help us to visualize the problem.

I'm trying to access a forum that requires a user name and password. When I do it on my mac it tells me the password is incorrect but when I do it on my iPad, I can access it without any problem. I can confirm the username and password are the same

I am trying to access a forum for which you need a username and password but it keeps telling me the username/password i've entered are incorrect. Bizarrely, when I enter the same username/password combination on my iPad, it grants access without any problem.
What could be causing this, is it an issue with cookies, caches or similar. How can I resolve it? The forum administrator is at a loss as to what the problem is.

Try the following steps in Safari to see if they help:
1) First try clearing the Safari cache. To do this pull down the Safari menu and select 'Empty cache...', then try logging into the site again.
2) If the issue continues then reset Safari by pulling down the Safari menu and select'Reset Safari...'. You will be presented with a list of items that can be reset. I suggest selecting the 'Reset saved names and passwords', and 'Remove all website data' options at a minimum.
Here is a list of the options and what they do. I pulled it from the Safari help page.
Clear history:
Clears the list of webpages you viewed.
Reset Top Sites:
Clears any changes you made to Top Sites, such as adding or pinning sites. If you also clear your history, your Top Sites page reverts to showing the webpage previews displayed when you first installed Safari.
Remove all webpage preview images:
Clears any thumbnail images Safari saved of webpages you viewed.
Clear the Downloads window:
Clears the list of files you downloaded from websites. Only the names are removed; the files themselves are still on your disk until you remove them.
Remove all website icons:
Removes website icons, which are small graphics that help identify sites on the Internet. You see them in the Safari address field and bookmarks list, and other places. These icons are stored on your computer.
Remove saved names and passwords:
Removes user names and passwords that Safari automatically fills in at websites that require them (if the AutoFill feature is turned on).
Remove other AutoFill form text:
Removes some personal information, such as telephone numbers, that Safari uses to automatically fill in forms on webpages (if the AutoFill feature is turned on). Removing AutoFill information does not remove information from your address book.
Close all Safari windows:
If you don’t close all Safari windows, someone could use the Back and Forward buttons to view the webpages you visited.
Reset all location warnings:
Clears any information websites saved about your location.
Remove all website data:
Removes cookies, tracking information, and other data that websites stored on your computer.

I just switched to Charter. When going to Mozilla Firefox a box appears saying, Authentication Required and asks for a User name and Password. What do I do?

I switched from CenturyTel to Charter. I can't use Firefox because a box appears asking me for Authentication Required, User Name and Password. When I hit cancel, this message appears:
HTTP 401 - Unauthorized
Authorization is required to access the configuration server.
You must enter the correct username and/or password.
When I called Charter, they told me they recommended using Internet Explorer. I told them I didn't want IE, I preferred Firefox. They recommended I go to your support page, so here I am. :o)

Have you reset the password recently for the email account?
A real simple fix usually is to delete the mail account (settings < mail contacts calendars, tap the affected account and choose delete at the bottom) Then re add the account.

Trying to update my apps on the iPhone 3. When I type in user name and password, I get the message "Cannot connect to iTunes Store" How can I connect?

Trying to update my apps on the iPhone 3. When I type in user name and password, I get the message "Cannot connect to iTunes Store" How can I connect?

I have the same problem. Any suggestions?

User name and password required to access Security settings

I have an HP5520e all in one printer. I am trying to set it to scan to my computer. The instructions say I should activate Webscan from the Administrator Options under Settings and Security. When I try to get to Administrator settings I am being asked for a user name and password. What username and password am I supposed to enter here?
This question was solved.
View Solution.

gnomad899,
Welcome to the HP Forum.
Start with the standard:
admin = admin
password = password (or leave it blank)
This assumes, of course, you have not used EWS (embedded web server) and set a password for it previously -- which you CAN do while using EWS. Once you do set a password using the EWS page, everytime you want to look at certain settings, adjust certain settings, you have to enter the password you set up.
EWS is simply the web page interface to the printer -- like you use a web page to talk to your router software. Same thing - sort of, except you type in the printer IP on your browser instead of the router, of course.
============================================================================
If it won't let you in,
You can try resetting the printer. Be Aware that should you do this, you have to re enter any previously entered information (wireless settings, etc.).
You might be able to reset the printer on the front panel - settings > factory defaults (or similar).
OR
from TroubleShooting > Solve a Problem > Printer Does Not Maintain Wireless Connection
Step four: Reset the printer and wireless router, and then restart the computerFollow these steps to reset your printer and your wireless router, and then restart your computer.
NOTE:Consider bookmarking this page on your web browser so that you can reference it after restarting the computer.
Follow these steps to reset your printer, your wireless router, and your computer.
Press the Power button on the printer to turn it off.
Disconnect the power cord from the rear of the printer.
Disconnect the power cord from the wireless router.
Turn off the computer.
Wait 30 seconds.
Reconnect the power cord to the wireless router.
Wait 30 seconds, or until the router is fully on and ready.
Turn the computer back on.
Wait for the computer to reload.
Reconnect the power cord to the rear of the printer.
Turn the printer back on.
===========================================================================
Reference:
HP 5520 e All in One Printer
User Guide
Click the Kudos Thumbs-Up to show you appreciate the help and time from our Experts.
Although I strive to reflect HP's best practices, I do not work for HP.
Click Accept as Solution when the Answer is a good Fix or Workaround!
Kind Regards,
Dragon-Fur

Initially stating No authorization required using Adobe. When I try to change it so I can transfer downloaded books by my Nook e-reader it I get an error message stating the Adobe user name and password is associated with another computer. What gives?

When I set up Adobe reader on my computer to be able to download books from a library and then transfer to my Nook e-reader, I initially stating No authorization required using Adobe. When I try to change it so I can transfer downloaded books by my Nook e-reader it I get an error message stating the Adobe user name and password is associated with another computer. What gives?

This is pretty surprising and wierd that even Reader 10.1.1 is crashing on your system. It works pefectly for me.
Would it be possible for you to get the crash dump, and upload it, so that I can have a look at the same.
Download PROCDUMP from <http://technet.microsoft.com/en-us/sysinternals/dd996900.aspx> and extract it to a folder, say, c:\temp\procdump.exe
Open cmd prompt and type "cd c:\temp".
Launch the browser and open the PDF.
Open task manager, sort processed by name. Two AcroRd32.exe instances should have been launched. Note the PID (a small integer like 5588) corresponding to the AcroRd32.exe with the higher memory usage; this is the process that must be crashing. Note this PID.
On the cmd window, type "procdump -e -ma 5588 c:\temp\01.dmp" (replace 5588 with the actual PID of the process noted in Step 4). Procdump will now wait for the aoolication to crash. If it throws a EULA, accept it.
Perform your steps to cause the crash.
Procdump will have created a dump file at "c:\temp\01.dmp". Zip it up (since it will be 100s of MBs otherwise) and share with me.
Thanks in advance for all your help
Ankit

Could not connect to DbaaS Service using the given user name and password.

I'm not able to create Java Cloud Service (Oracle Java Cloud - Virtual Image Services) for my newly created Oracle Database Cloud Service instance. It fails with
"Incorrect values entered
Could not connect to DbaaS Service using the given user name and password.
Verify that the user name and password are correct and the user name has SYSDBA privileges."
I'm using SYSTEM user and the password I used during Oracle Database Cloud Service instance creation. I've verified them with sqlplus and also by connecting remotely.
Java Cloud Service wizard doesn't allow me to proceed to instance creation.

Hi Alexander,
Maybe you'll find useful the document from Oracle docs specified bellow regarding Creating an Oracle Java Cloud Instance:
http://docs.oracle.com/cloud/latest/jcs_gs/JSCUG/GUID-31F00F2C-221F-4069-8E8A-EE48BFEC53A2.htm#JSCUG3128
Thanks,
Cristiana.
#OracleCloud

Connecting to SMTP mail server using user name and password in java

Hi,
I am trying to send mail using SMTP server in java.
But my SMTP server only allows valid users to send mails. I need a way to pass my user name and password to my SMTP server.
How do I do this ?
Thank you
Ramesh

I think the client is not able to do a HTTP POST
to the WLS server but it can do a HTTP GET.
I dont know why.
http://manojc.com
"Ganesh" <[email protected]> wrote in message
news:3eba91bc$[email protected]..
>
Hi,
I deployed a rpc web service using WLS 7.0 SP2 in HP-UX 11 environment.When I
invoke the web service through my browser (IE 6.0) using the web servicesurl,
it brings my service method correctly. From there, if I click the invokebutton
it asks me for a network user name and password under "weblogic" realm???If I
provide the admin user credentials (which I supplied while creating mydomain)
it is not accepting that it keeps popping up this network user passwordwindow
over and over. Not sure which username/password I have to provide here tosee
the result of my service.
If I try to invoke the web service through my client (static) I am gettinga connection
refused exception. I guess either way, I am not able to access my webservice.
In the attached file, I have cut and pasted the client stack trace as wellas
the server log trace from weblogic.
Any ideas would be highly appreciated.
Thanks,
Ganesh

Http connection with user name and password

Hello All,
I'm trying to open http connection from my application on the 8100 device and i'm getting an error message saying that the port number isn't valid. I'm trying to add user name and password to the prefix of the url (e.g.: http://[email protected]/dir/)
and the error message appears, but when i'm using the same url without the user name and password everything works great.
Does anyone knows what's wrong or encountered this issue before?
thanks.

hello,
I believe when you input the credentials, the website does a redirection to another port that is not supported by your internet access provider ?
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Hi, My problem is I cannot connect my apple tv to my account, the user name and password are definitely correct, I upgraded the software, reset the device, but no chance. What should I do?

Hi, My problem is I cannot connect my apple tv to my account, the user name and password are definitely correct, I upgraded the software, reset the device, but no chance. What should I do?

Try this:
Reboot device by pressing both the home button and sleep/wake (power) buttons at the same time for 10-15 seconds until the apple logo appears on the screen, then let go.
If that doesn't work then reset the device by going to settings/general/reset/reset all settings (or for network connection issues 'reset network settings').
(no media or data will be deleted from the device, this will only take a minute).

Leopard Safari requires reloading user name and password

Tried asking this another way and no one answered, which left me to wonder if no one on this forum knows the answer or it I wasn't clear in asking it? Let me be more specific: Leopard Safari requires a user name and password to be entered each time an appropriate web site is opened, even when "refresh" is clicked. For example, I use "myyahoo" for the homepage, but now each time I open Safari, I am required to reenter the user name and password. Ditto every site I have saved autofill data for. This did not happen with Tiger, prior to upgrading to Leopard last Friday. I also tried phoning the Apple Care support number -- a 37 minute wait produced someone who said my call needed to be forwarded to the Safari desk, and likely involve another extensive wait. So I gave up that idea and am trying here again. Help!

Thank you! In Preferences, all the autofill boxes are checked. Just to be sure, I unchecked them all then rechecked them. Autofill form works in Edit. Before the upgrade, Safari was able to maintain user names and passwords on sites where I wanted them. After the upgrade Friday evening, Safari stopped doing this on all sites where I already had a user name and password, including the Mac site. Simply, I am now required to re-enter this information every visit to every site, even if I just click refresh, not only when I exit Safari and return. Even if I leave a site where I have entered the password, visit another site, and then return, the user name and password must be entered again. I have still had no luck getting Apple Care on the phone. This morning I bit the bullet and decided to wait until finally somebody answered, but no amount of patience can listen to scratchy wait music for more than 45 minutes, which is when I gave up. So if someone here doesn't understand this, guess I'm stuck having to enter this information again and again and again... or figure out how to get back to Tiger.

P1102W wifi connection requires SSID pluss user name and password to connect

Similar Messages

Maybe you are looking for