P1606dn does not print web services printer code

A message appears informing web services printer code will be printed. But it is not printed. This did work once. However i needed to remove the printer from eprintcenter and readd. Readd needed a new printer code??

Hi there hope you are doing well Lochana;
I will need to know what operating system and version of it do you have in your computer? If you need futher assistance.
Watch this video; to get familiar with eprint registration procces
Let's take this steps 1st.
Perform a power reset on the HP product and wireless router, and then restart the computer
Follow these steps to reset your HP printer, your wireless router, and your computer.
Press the Power button ( ) on the HP printer to turn it off.
Disconnect the power cord from the rear of the HP printer.
Disconnect the power cord from the wireless router.
Turn off the computer.
Wait 30 seconds.
Reconnect the power cord to the wireless router.
Wait 30 seconds, or until the router is fully on and ready.
Turn the computer back on.
Wait for the computer to reload.
Reconnect the power cord to the rear of the HP printer.
Turn the printer back on.
Try again to see if get the printe code.
Enable Web Services from the Embedded Web Server (EWS)
Use the following steps to enable Web Services on your HP product.
Locate your product's IP address on the test page you printed previously.
Open an Internet browser (such as Internet Explorer).
Type the product IP address in the browser address bar, and then press Enter .
The EWS opens.
NOTE:If the EWS does not open, your product is not connected to the network. Test your network connections again and return to these steps.
Click the HP Web Services tab.
On the HP Web Services tab, click the green Enable button to enable Web Services.
NOTE:If you see a green Remove Services button, then Web services is already enabled.
When Web Services is enabled, the product prints an information page. This process might take a few minutes. The information page contains the printer code you use to register your HP product at HP ePrintCenter.
Firmware update
A firmware update might help to resolve wireless connectivity issues. Firmware updates are available for download on the Web. Follow these steps to obtain a firmware update for your product:
NOTE:Firmware updates are different from product updates (that were referenced in the previous step). Make sure to perform both types of updates to guarantee that your HP product has the most up-to-date functionality.
Click this link, HP Customer Care , to go to the HP Customer Care Support page.
Type your product number in the search field, and then click Next . You might also need to click your model in a list of similar products.
The product support page displays.
Click Software & Driver Downloads , select your operating system, and then click Next .
Click the Plus sign ( ) next to Firmware to view the firmware updates.
Click the firmware update, and then follow the on-screen instructions to download and install the firmware.
Hope this helps!
RobertoR
▼
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

Similar Messages

Can not enable web services. printer on the network. default ip not connecting using auto ip

B210 - have tried resetting defaults . default IP address will not connect to network with auto IP had to set IP addrtess manually something similiar to the properties on the verzion hot spot. can not disable web services - never enabled.
no Primary or secondary DNS server. not sure if this is problem. can print ok thru network.
This question was solved.
View Solution.

Hey bobupton!
Try going into the printer's EWS and using Google's public DNS servers (8.8.8.8 and 8.8.4.4). It sounds like you know what you're doing so I skipped a few steps on how to get there but if you need more help with it let me know!
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

IllegalArgumentException does not produce Web Service Fault

Folks,
I'm deploying an EJB 3.0 annotated to provide Web Services for Weblogic 10.3. One of the parameters to the EJB contains is a BigDecimal Value. When this parameter is created, we check to make sure it meets certain criteria. If it fails we throw an IllegalArgumentException. This Exception does not get propagated back to the client (a soap client) as a fault.The marshalling code just seems to ignore the exception.
*1) Here's the code:*
private void checkNum2( BigDecimal value ) throws IllegalArgumentException
if ( value.scale() > 0 )
throw new IllegalArgumentException(
"Property ImportCalcCalculator.Num2 cannot be more than 0 fractional digits");
*2) Here is the stack when the code is about to throw the fault:*
SCalculatorImport$ImportCalcCalculator.checkNum2(BigDecimal) line: 607
SCalculatorImport$ImportCalcCalculator.setNum2(BigDecimal) line: 597
SCalculatorImport$ImportCalcCalculator$JaxbAccessorM_getNum2_setNum2_java_math_BigDecimal.set(Object, Object) line: 56
TransducedAccessor$CompositeTransducedAccessorImpl<BeanT,ValueT>.parse(BeanT, CharSequence) line: 241
LeafPropertyLoader.text(UnmarshallingContext$State, CharSequence) line: 61
UnmarshallingContext.text(CharSequence) line: 462
InterningXmlVisitor.text(CharSequence) line: 89
StAXStreamConnector.processText(boolean) line: 367
StAXStreamConnector.handleEndElement() line: 245
StAXStreamConnector.bridge() line: 214
UnmarshallerImpl.unmarshal0(XMLStreamReader, JaxBeanInfo) line: 358
BridgeImpl<T>.unmarshal(Unmarshaller, XMLStreamReader) line: 120
BridgeImpl<T>(Bridge<T>).unmarshal(XMLStreamReader, AttachmentUnmarshaller) line: 233
EndpointArgumentsBuilder$DocLit.readRequest(Message, Object[]) line: 517
EndpointMethodHandler.invoke(Packet) line: 243
SEIInvokerTube.processRequest(Packet) line: 93
Fiber.__doRun(Tube) line: 598
Fiber._doRun(Tube) line: 557
Fiber.doRun(Tube) line: 542
Fiber.runSync(Tube, Packet) line: 439
WSEndpointImpl$2.process(Packet, WebServiceContextDelegate, TransportBackChannel) line: 243
HttpAdapter$HttpToolkit.handle(WSHTTPConnection) line: 444
EJBDeployInfo$WLSEjbServletAdapterList$1(HttpAdapter).handle(WSHTTPConnection) line: 244
EJBDeployInfo$WLSEjbServletAdapterList$1(ServletAdapter).handle(ServletContext, HttpServletRequest, HttpServletResponse) line: 134
HttpServletAdapter$AuthorizedInvoke.run() line: 272
HttpServletAdapter.post(HttpServletRequest, HttpServletResponse) line: 185
JAXWSEjbServlet(JAXWSServlet).doPost(HttpServletRequest, HttpServletResponse) line: 180
JAXWSEjbServlet(HttpServlet).service(HttpServletRequest, HttpServletResponse) line: 727
JAXWSEjbServlet(JAXWSServlet).service(HttpServletRequest, HttpServletResponse) line: 64
JAXWSEjbServlet(HttpServlet).service(ServletRequest, ServletResponse) line: 820
StubSecurityHelper$ServletServiceAction.run() line: 227
StubSecurityHelper.invokeServlet(ServletRequest, HttpServletRequest, ServletRequestImpl, ServletResponse, HttpServletResponse, Servlet) line: 125
ServletStubImpl.execute(ServletRequest, ServletResponse, FilterChainImpl) line: 292
ServletStubImpl.execute(ServletRequest, ServletResponse) line: 175
WebAppServletContext$ServletInvocationAction.run() line: 3498
AuthenticatedSubject.doAs(AbstractSubject, PrivilegedAction) line: 321
SecurityManager.runAs(AuthenticatedSubject, AuthenticatedSubject, PrivilegedAction) line: not available
WebAppServletContext.securedExecute(HttpServletRequest, HttpServletResponse, boolean) line: 2180
WebAppServletContext.execute(ServletRequestImpl, ServletResponseImpl) line: 2086
ServletRequestImpl.run() line: 1406
ExecuteThread.execute(Runnable) line: 201
ExecuteThread.run() line: 173
Regards,
Robert

Hi,
simply throw SOAPFaultException, that's all.
What I recommend is following :
- ejb method throws IllegalArgumentException
- ws method - catch block converts exception to SOAPFaultException and throws it
- client receives fault, e.g. .NET client receives fault, it works.
Here is method converting Throwable to SOAPFaultException
     protected SOAPFaultException convertToSOAPException(final Throwable t)
     Detail detail = null;
     try
     SOAPFactory soapFactory = SOAPFactory.newInstance();
     detail = soapFactory.createDetail();
     catch (SOAPException e)
          Log.getLogger(this).error(e);
     QName faultCode = null;
     String faultString = t.getMessage();
     String faultActor = this.getClass().getName();
     if( AppProperties.getProperty("soap_exception_include_stack_trace", false) == true )
               CharArrayWriter caw = new CharArrayWriter();
               PrintWriter pw = new PrintWriter(caw);
               t.printStackTrace(pw);
          faultString = caw.toString();
     SOAPFaultException sfe = new SOAPFaultException(faultCode, faultString, faultActor, detail);
     Log.getLogger(this).error(sfe);
     return sfe;
Hope it helps
Miro N.

HP 6700 printer will not enable web services.

My HP 6700 printer will not enable web services. I've already downloaded the firmware update, manually entered the IP and DNS numbers... shutdown the printer and turned it back on.But when i try to enable web services it try's for a while then says web services could not be enabled.. any help would be appreciated. I have vista.
This question was solved.
View Solution.

Hi there, two other things you could try (if not already attempted) are:
Check to ensure that you have the latest firmware for your router – review your router documentation/help (or the router manufacturer’s web site) for information on how to check for and install firmware updates.
Restore factory defaults - The factory default option is usually found in the Setup>Tools menu on your printer. Do the following on your device:
Remove/Disable Web Services
Restore factory defaults/settings (depending on the printer this is found under the Setup>Tools menu, or the Setup>Web Services menus, but varies by printer)
If prompted, re-do initial setup of your device and add it to your network
Re-enable Web Services
Once the Web Services information sheet is printed, use the printer claiming code to add your printer to your account on ePrintCenter
If my reply helped you, feel free to click on the Kudos button (hover over the "thumbs up").
If my reply solved your problem please click on the Accepted Solution button so other Forum users may benefit from viewing the post.
I am an HP employee.

I could not enable web services on my laserjet 500 colour M551 printer

I could not enable web service on laserjet 500 colour M551 printer but i proper configure the ip & dns. The internet is working properly from laptop or desktop on this lan port. what to do?

@garytech1,
Wouldn't inputting those settings disrupt their connectivity within their own network?
Why would those IP settings work?
Curious, mostly. I have 25 of the M551 units on our network and every last one of them has the sticker saying it can be used with HP ePrint, however the "Web Services" tab in the EWS that is supposed to be the place to turn on or activate the ePrint option ... is not there on their EWS pages. Installing the latest firmware does not bring the option in. I've not located any option to enable it. From the printer's menu, there is a place under "How to Connect" for the ePrint option but it reports that it isn't enabled.
I just want to be able to enable that functionality. I've done it on other HP models, but can't find the option on these units.

I can not print web pages,print box does not appear . I can print web pages using IE

Windows 7. Firefox 5.0 I can not print web pages. After clicking PRINT the print dialog box does not appear and nothing prints. I do not have this problem using IE
Printer: Brothers HL-5140
Thank you,
Syd

First of all, update Firefox to 3.6.17 via Help | Check For Updates.
There was a security breach at Comodo which is an SSL certificate provider recently whereby a number of fraudulent certificates were inadvertently issued. These allow a hacker to impersonate any site including online banking and the Firefox version you're running at the moment will not warn you that the site is a fake. The fraudulent certificates were blacklisted in v3.6.17 and beyond.
To uninstall the Yahoo Toolbar, go to Tools | Add-ons | Extensions. You should find it in there.
To revert to Google as your preferred search engine, please do the following.
* In the location bar, type '''about:config''' and hit Enter.
* In the filter at the top, type: '''keyword.URL'''
* Double click it and remove whatever's in there and replace it with http://www.google.com/search?q=
The URL to add in "keyword.URL" becomes a link in this post, so right click it and choose "Copy Link Location" to copy it to the Windows clipboard. Then hit CTRL+V to paste it. Saves you having to type the whole thing.
'''To reset your home page, do the following'''.
* Go to the site you want to set as your homepage.
* Go to '''Tools '''| '''Options '''| '''General'''
* Make sure it says "''Show My Homepage''" in the first dropdown menu.
* Click the button called "'''Use Current Pages'''" to set the homepage to the one you have on the screen.
After you complete the above steps, install this add-on to prevent another search engine from modifying your preferences: https://addons.mozilla.org/en-US/firefox/addon/browserprotect/
Additonal security risks on your system are the version of Flash you have installed at the moment. See http://www.adobe.com/support/security/bulletins/apsb11-12.html
Update via http://get.adobe.com/flashplayer/
Printing issues might be fixed by installing Java via http://www.java.com/en/
But if the problem persists, please post again.

Printing web service information sheet

how do I print web Service Information sheet on my photosmart 5510

Hello michugo1,
On the front panel of the printer:
Press the ePrint button.
Press the "Print Info" option to print the ePrint information sheet.
If Web Services have not been enabled, after selecting the ePrint button, prompts will take you through enabling the Web Services.
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

My iMac does not find my wifi printer or my Chromecast.

My iMac does not find my wifi printer or my Chromecast. I was able to ping the chrome cast and printer and I'm able to connect to these devices with my windows computer, iPhone and iPad. I have OS X 10.9.2. I'm able to print by setting up the printer using the IP address that was assigned by my router instead of letting my iMac do the finding. It seems that the iMac either does not like the info that is receiving or something is blocking the signal (other than the firewall, which is off). Could someone have an idea what the issue might be?

Hi MikeMart0923,
If you are having issues adding or connecting to your WiFi printer from your iMac, you may find the following articles helpful (apologies if you have already seen them):
OS X Mavericks: Set up a printer
http://support.apple.com/kb/PH14143
OS X: Connecting a Wi-Fi printer to your Wi-Fi network
http://support.apple.com/kb/ht3500
Note: This is assuming you have a simple network configuration, with only a single router/WiFi access point.
Regards,
- Brenden

My Canon MX 922 does not scan. My printer is connected via cable. Wireless doesn't work either.

My Canon MX 922 does not scan. My printer is connected via cable. Wireless doesn't work either. I get an error message with multiple suggestions but none of them apply to my situation.
I am so dissatisfied with this printer. I'm sorry I got it from Amazon because now it is a hassle to return it. I will never buy another Canon.
The printer menus are confusing. I hate using it. I loved my previous Canon which finally stopped working after many years, that's why I purchased a newer Canon model. Never again. Stick with cameras.
Marcy Hotz

This note won't be as angry and frustrated as the last one...
Because I still had my old printer drivers and other applications on my hard drive, I think the application was trying to connect with the old printer. I deleted all the old stuff.
I also had several scanning applications on my drive which just confused me.
When I used the actual Canon MX922 application, I was able to scan but could only save as JPG, TIF or BMP (and one more, I forget which). So I did some research on the Canon site and found out how to save documents as PDF files using the Canon IJ Scan Utility.
It works now. So I'm satisfied, will keep this maching. I just had to take some time, sit down and focus on the problem.

My pull down menu above the green "back" button disappeared recenly after I intalled an update. How to I get it back so I can print since right clicking does not give me a print option?

I used to have a tool bar at the top of the screen that had file, print, help, etc. After I recently installed something ( I can't remember what), the tool bar no longer appears. Help I need it back! I need to print screens and right clicking does not allow for a print option and my print screen button on my computer does not get me anywhere either. Please describe any help in simple terms - I'm just an average computer user! Thanks.

In Firefox 3.6 and later on Windows you can hide the "Menu Bar" via "View > Toolbars" or via the right-click context menu on a toolbar.
Press F10 or press and hold the Alt key down to bring up the "Menu Bar" temporarily.
Go to "View > Toolbars" or right-click the "Menu Bar" or press Alt+V T to select which toolbars to show or hide (click on an entry to toggle the state).
See also [[Menu bar is missing]] and http://kb.mozillazine.org/Toolbar_customization

GUI_DOWNLOAD does not work for background printing

Hi,
Need some help urgently.
Function moduel GUI_DOWNLOAD does not work for background printing. I want to know how this issue can be handled or we have to use some other function module.
We are using this in a report and i get the error dump OBJECTS_OBJREF_NOT_ASSIGNED when we run this report in background.
Kindly suggest.
Best Regards,
Abbasi

you can not use gui_download in background.
Try searching first, this thing has been posted a thousand times already

The software that you choose does not match the Selected Printer

Hi Friends,
I am trying to install a network Printer suing my Win Xp SP3 PC.
Since there is no drivers installed in this PC, I tried to select Have Disk option in the Bonjour Printer Setup Wizard and selected the INF file provided by the Manufaturer. When i select the INF file and click ok, It prompts with message "The software that you choose does not match the Selected Printer".
But the Manufaturer name is listed under the Manufacturer Tab and nothing on the Model Tab.
Any idea why i am getting this error message. Please help me if anyone is aware of this.

I haven't seen Apple use a "shared secret". and believe this must be a message from the magazine app. I suggest asking the magazine, as this appears not to be an Apple problem.

Westell 327W gateway does not recognize Brother network printer

The Westell 327W gateway does not recognize Brother network printer model MFC-490CW. Any idea?

I took a look at the Brother www site and would recommend the following:
Temporarily Connect the Printer to the Network with an Ethernet Cable
Run the Brother Installer Application to reconfigure the printer for Wireless (CD That Came w/ Printer)
You will need the Network Name (SSID) and Passcode (WEP Key) from your Router.
Once configured you will be able to disconenct the Ethernet Cable and use it wireless.
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it.
If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

Galaxy Tab does not see HP wireless printer

My Galaxy Tab and HP D110a are both clients in my wireless network, however, when I try to print an email my Galaxy Tab does not recognize the HP printer. Please advise. Thanks in advance.

Hi,
1) Are you sending an email to the printer from Galaxy tab?
2) If yes, What is the exact message you receive?
3) IS the WebServices enabled on the printer so that it acquires email ID from ePrint sever?
4) Are you able to print from computer when you send an email to printer ID?
5) Is the printer email ID added to your account in ePrint Center Website?
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

HP-photosmart 6280 all-in-one with osx 10.9 now does not show options for printing photos from the photo tray.

Using osx mavericks on macbook pro. My printer for HP-photosmart 6280 all-in-one now does not show options for printing photos from the photo tray.

What router? Have you restarted the router?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

P1606dn does not print web services printer code

Similar Messages

Maybe you are looking for