P1i dead after running Update Service - any suggestions
Hi
My P1i appears completly dead after running Update Service. I've tried removing the battery, fully charging the battery etc. When i run Update Service again it just says my phone is up-to-date.
any suggestions?
Unfortunately, in this case, we would only be able to suggest sending the handset for service. Usually when running the Update Service, you should get the option for EXIT but also for INSTALL when you are advised that you have the latest software. If you do not have this, the handset may need to be flashed by an engineer.
If you wish to do this, I'd recommend contacting your local support team to be advised of your nearest service location. Contact details can be found here:
http://www.sonyericsson.com/cws/corporate/common/contact
Similar Messages
-
The gyro no longer works when using the remote app on my iPad. I updated to iOS 7.0.1.
This seem to happen after the update. Any suggestions?Dear Apple friends,
I have the exact same problem with some apps.
Even when I try some websites in Safari and Chrome that require loading big chunks of data they crash.
Today it crashed in two new places. In the notification center and when I opened newstand app I no longer was able to return to the main window and the dock disappeared.
I have my ipad retina for about three months now but latelly this issue has became more frequent. What should I do?
Should I update to the latest firmware and do what raymond73 said?
Is there a fix for this issue?
Has Apple said anything about this? Because I see that this issue is happening to a lot of people.
Is it possible to downgrade to iOS 6?
Is it a firmware problem? That can be fixed in future releases? Or an hardware issue?
Should I wait or go to the place I bought it and try to get the money back? -
I am unable to open my itunes after maverick update. Any suggestions?
I am unable to open my itunes after maverick update. Any suggestions?
Hi there sharonlarks26,
You may want to try reinstalling the latest version of iTunes. Take a look at the article below for more information.
Troubleshooting iTunes installation on Mac OS X
http://support.apple.com/kb/ht2311
-Griff W. -
My brand new iMac will not power up after an update restart, any suggestions?
Any suggestions on why my IMac will not power up after it done a restart?
Try an SMC reset and PRAM reset: https://discussions.apple.com/docs/DOC-3603
If that doesn't help:
See if it will start in Safe Boot: restart holding down the Shift key until you see a grey progress bar, type your admin password when prompted, let it continue to (hopefully) boot. Restart as normal from the Apple menu.
If that didn't help, try booting into the Recovery HD: restart holding down Command+r and choose Disk Utility from the four choices when they appear on screen. Once DU has launched select your Macintosh HD on the left and click on 'repair disk'. If anything gets changed click on repair disk again until you get a clear pass, restart as normal from the Apple menu.
If you still have problems, give AppleCare a call. -
Safari is not opening websites after Maverick update. Any suggestions?
Recently updated to Maverick and now the Safari is not opening anything. I have a Macbook Pro 15 inch 2010. Looking for suggestions to fix the problem.
Try using another browser.
Firefox
Safari 5.0.1 or later - Slow or partial webpage loading, or webpage cannot be found
Safari Problems
Safari/Reset Safari - try a reset. -
IMac won't boot up after latest update. Any suggestions?
I just updated my software (the latest from apple), then my iMac won't boot again.
There you go. Your HDD is failing hence its not booting. You need reformat the HDD
To reformat, same steps: Boot to the install disc > get past the language selection > You will see Welcome to Blah Blah Blah > just hit continue > There should be something there called erase and install
BUT
1. if you are absolutely sure that Time machine has BACKED-UP all of your files then proceed above
2. If not, if you have another mac: connect it via firewire then google Target Disk mode. Basically you want to copy all your files from the damaged machine to the new mac to serve as a backup
3. if yo dont have another mac: get an external HDD, install Mac os X on it, boot to it then back up your files
to do this
a) Plug external HDD
b) Boot to the CD restart and hold C
c) Get past language selection and keep hitting continue
d) when it asks you where you want to install Mac os X > select the external HDD
e) once its installed. Restart the computer and hold "Option" key. You should now see your external HDD as one of the boot drives. Select that and you'll boot into it
f) once inside the external HDD OS, you will see the internal HDD(damaged drive)browse/navigate through it and start getting your important files -
My iphone 4 is dead after I updated to ios 6.1.3 it doesnt turn on and doesnt respond to itunes also. Visited Apptronix service desk but they say there is nothing they can do about it, and they have charged INR 10640 for a new one. Is there anybody with similar problem....
Hm... Try this----> http://support.apple.com/kb/ht1808 or http://osxdaily.com/2010/12/04/ipad-dfu-mode/
-
Hi, the App Store icon has been removed from my iPad even after synching and updating. Any suggestions on how to get it back to be able to update / purchase apps?
If you do not have, or remember, the passcode for Restrictions, the only option available to you is to reset the device to factory settings via itunes.
-
my iphone does not always turn on when i click the home button or start button? takes a few clicks and then it goes on. Happened after ios7.5 update. Any suggestions? Phone is brand new
Ok i did what you said to and it did it again, I am at work. Phone is on my desk. I clicked the home button to see if I had missed any messages and it would not turn on.
Starnge thing is this happened to my other 5S. Took it to apple. They replaced it, Now this phone is doing the same thing, Could it be the software?
Do you have another suggestion for me?
Your help is appreciated . -
My Mac desktop is incredibly slow after I installed Yosemite - any suggestions?
My Mac desktop is incredibly slow after I installed Yosemite - any suggestions? Thanks
Problem description:
After installing Yosemite, my MAC desktop is incredibly slow - particularly when using the internet.
EtreCheck version: 2.0.11 (98)
Report generated November 9, 2014 at 6:37:47 PM EST
Hardware Information: ℹ️
iMac (27-inch, Late 2009) (Verified)
iMac - model: iMac10,1
1 3.06 GHz Intel Core 2 Duo CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
empty empty empty empty
BANK 1/DIMM0
empty empty empty empty
BANK 0/DIMM1
2 GB DDR3 1067 MHz ok
BANK 1/DIMM1
2 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
ATI Radeon HD 4670 - VRAM: 256 MB
iMac 2560 x 1440
System Software: ℹ️
OS X 10.10 (14A389) - Uptime: 6:47:56
Disk Information: ℹ️
Hitachi HDE721010SLA330 disk0 : (1 TB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 999.35 GB (792.07 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
OPTIARC DVD RW AD-5680H
USB Information: ℹ️
Apple Inc. iPod 79.82 GB
S.M.A.R.T. Status: Verified
disk2s1 (disk2s1) <not mounted> : 254 KB
David L. Medeck’s iPod (disk2s2) /Volumes/David L. Medeck’s iPod : 79.82 GB (66.57 GB free)
Apple Inc. Built-in iSight
Apple Internal Memory Card Reader
Iomega External HD 250.06 GB
S.M.A.R.T. Status: Verified
Iomega_HDD (disk1s1) /Volumes/Iomega_HDD : 250.06 GB (198.93 GB free)
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/System/Library/Extensions
[not loaded] com.devguru.driver.PTUMWDrv (10.5.24) Support
[not loaded] com.novatelwireless.driver.3G (3.0.7) Support
[not loaded] com.novatelwireless.driver.DisableAutoInstall (2.0.6) Support
[not loaded] com.rim.driver.BlackBerryUSBDriverInt (0.0.40) Support
[not loaded] com.rim.driver.BlackBerryUSBDriverVSP (0.0.40) Support
[not loaded] com.sierrawireless.driver.SierraDevSupport (2.0.2) Support
[not loaded] com.sierrawireless.driver.SierraFSCSupport (2.0.2) Support
[not loaded] com.sierrawireless.driver.SierraFSRSupport (2.0.2) Support
[not loaded] com.sierrawireless.driver.SierraHSRSupport (2.0.2) Support
[not loaded] com.smithmicro.driver.SMSIWirelessModem (3.2.7) Support
/System/Library/Extensions/NovatelWireless3G.kext/Contents/PlugIns
[not loaded] com.novatelwireless.driver.3GData (3.0.7) Support
/System/Library/Extensions/PTUMWDrv.kext/Contents/PlugIns
[not loaded] com.devguru.driver.PTUMWCDFree (10.5.24) Support
[not loaded] com.devguru.driver.PTUMWCSP (10.5.24) Support
[not loaded] com.devguru.driver.PTUMWDIAG (10.5.24) Support
[not loaded] com.devguru.driver.PTUMWMdmControl (10.5.24) Support
[not loaded] com.devguru.driver.PTUMWMdmData (10.5.24) Support
[not loaded] com.devguru.driver.PTUMWUSBMergeNub (10.5.24) Support
/System/Library/Extensions/SMSIWirelessModem.kext/Contents/PlugIns
[not loaded] com.smithmicro.driver.SMSIWirelessCDC (3.2.7) Support
[not loaded] com.smithmicro.driver.SMSIWirelessSerial (3.2.7) Support
Launch Agents: ℹ️
[running] com.epson.Epson_Low_Ink_Reminder.launcher.plist Support
[running] com.epson.eventmanager.agent.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.macpaw.CleanMyMac2.Agent.plist Support
User Launch Agents: ℹ️
[not loaded] com.macpaw.CleanMyMac.helperTool.plist Support
[not loaded] com.macpaw.CleanMyMac.trashSizeWatcher.plist Support
[not loaded] com.macpaw.CleanMyMac.volumeWatcher.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist Support
[loaded] ltcm.plist Support
User Login Items: ℹ️
Garmin Express Service Application (/Applications/Garmin Express.app/Contents/Library/LoginItems/Garmin Express Service.app)
vzwwirelessd Application (/Applications/VZAccess Manager.app/Contents/PlugIns/vzwwirelessd.app)
HPEventHandler Application (/Library/Printers/hp/hpio/HPEventHandler.app)
HP Scheduler UNKNOWN (missing value)
Internet Plug-ins: ℹ️
JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 15.0.0.189 - SDK 10.6 Support
Default Browser: Version: 600 - SDK 10.10
GarminGpsControl: Version: 4.0.4.0 Release - SDK 10.6 Support
Silverlight: Version: 4.0.60531.0 Support
iPhotoPhotocast: Version: 7.0
User Internet Plug-ins: ℹ️
WebEx64: Version: 1.0 - SDK 10.5 Support
Safari Extensions: ℹ️
Adblock Plus
3rd Party Preference Panes: ℹ️
Flash Player Support
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
3% WindowServer
0% fontd
0% AppleSpell
0% askpermissiond
Top Processes by Memory: ℹ️
163 MB iTunes
159 MB Safari
146 MB softwareupdated
133 MB Finder
129 MB Quicken Essentials
Virtual Memory Information: ℹ️
58 MB Free RAM
1.90 GB Active RAM
1.85 GB Inactive RAM
487 MB Wired RAM
6.16 GB Page-ins
2 MB Page-outs -
Cannot access safe boot for Mac Air running Snow Leopard any suggestion please?
Mac Air - Mid 2011 (79gig free space). Running Snow Leopard 10.6 + all updates installed to-date. Last update was iTunes 98m file which was installed 4 days ago.
Unit has progressively slowed up, starting with intermittent freezing of cursor, which appears to have started not long after connecting iPhone 5 running current iOS.
Have accessed Safe Boot and ran drive utility check, all ok.
Received error message after drive check stating, "(AppleUsbEthernetHost.text) incorrectly installed".
Have subsequently tried accessing Safe Boot again to try and reset permissions, but can not access as unit constantly freezes at Login page.
Have followed Apple support recommendations to access Safe Boot, but to no avail.
Have seen forum references to the above error relating to iOS mobile devices causing problems with earlier versions of iTunes updates.
Any suggestions as to how to proceed from here would be appreciated ?
IvyI suggest you backup your files, if possible, then do the following:
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
with your computer. Insert the disc into the optical drive and restart the computer.
After the chime press and hold down the "C" key. Release the key when you see
a small spinning gear appear below the dark gray Apple logo.
2. After the installer loads select your language and click on the Continue
button. When the menu bar appears select Disk Utility from the Utilities menu.
After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
size.) Click on the Partition tab in the DU main window. Set the number of
partitions to one (1) from the Partitions drop down menu, click on Options button
and select GUID, click on OK, then set the format type to MacOS Extended
(Journaled, if supported), then click on the Apply button.
3. When the formatting has completed quit DU and return to the installer. Proceed
with the OS X installation and follow the directions included with the installer.
4. When the installation has completed your computer will Restart into the Setup
Assistant. Be sure you configure your initial admin account with the exact same
username and password that you used on your old drive. After you finish Setup
Assistant will complete the installation after which you will be running a fresh
install of OS X. You can now begin the update process by opening Software
Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstall your third-party software from the original media. Restore your data from the backup. -
I'm having difficulty syncing my iCal between my home computer and iPhone. New entries from my home are not syncing with the phone and vice-versa. I didn't have any problems with this before until the latest phone update. Any suggestions?
It could be that the existing wire in your appartment is not clean enough to provision DSL only. When combined with the phone possibly it has a higher line voltage and worked before. Now that the line is to be provisioned without phone service it may be giving them trouble that did not show before they came out and ran the new line test. So a new jack dedecated for your DSL line may require a new wire be run to your appartment. Also the account for internet only used to require direct billing to a credit card or something else. This was a number of years ago. Most accounts are linked to a phone number, and without a voice number it adds to the confusion.
If you are getting the voice and everything turned on as before, then I am at a loss for words. -
on my windows 8.1 pc (i5 processor with 8GB ram) I can't get the automatic update voor CS4 master collection. I removed my panda antivirus and still can't automatically update. somebody any suggestion?
thanks for your reply.
in Dutch it says that there are no updates available. I know that after
installing cs4 there are updates but i can't load them automatically. I did
a delete and reinstall, but still get the message.
kind regards,
2014-09-23 16:28 GMT+02:00 Atul_saini123 <[email protected]>:
on my windows 8.1 pc (i5 processor with 8GB ram) I can't get the
automatic update voor CS4 master collection. I removed my panda antivirus
and still can't automatically update. somebody any suggestion? created
by Atul_saini123 <https://forums.adobe.com/people/Atul_saini123> in *Downloading,
Installing, Setting Up* - View the full discussion
<https://forums.adobe.com/message/6755843#6755843> -
my ipod nano just stopped working right after playing a song, any suggestions to get it back working?
Did the battery run out of power? If not, try doing a Reset to "reboot" the iPod
http://support.apple.com/kb/ht1320
(A Reset does NOT erase the iPod.) -
My Adobe Reader Updater appears to be stuck and is NOT updating. Any suggestions?
My Adobe Reader Updater appears to be stuck and is NOT updating. Any suggestions on how to fix?
Download and run the Adobe Cleaner to completely remove Reader.
Download the offline installer here: http://get.adobe.com/reader/enterprise/ and run it.
Maybe you are looking for
-
Unable to use debug mode for x64 application and debug doesn't work when target cpu set to x86
I am attempting to familiarize myself with Visual Basic programming in Visual Studio 2008, using the Visual Basic Guided Tour in Microsoft Visual Studio 2008 Documentation, and have run into a bit of a road-block. When following the lesson "It Doesn
-
I'm running Acrobat 7.1 Professional with latest updates, on a WinXP system (SP3). Printer-scanner is a Brother 420CN and a laser printer HL 2040. Neither is recognised by Acrobat, although I can print to them from Reader (latest version) and any oth
-
Web Service Architecture Question
I am a J2EE newbie. I am a certified J2SE developer, but still learing J2EE. I currently have a web-application that monitors a database. The Web application consists of a group of JSPs that create JDBC connections to a database and retrieve informat
-
Is anyone else experiencing problems with icloud? I use it between my iPad mini (latest iOS) and iPhone 4s (iOS 6). It started with my photostream oddly being turned off on my iPad, I did not do this! My icloud browser tabs won't sync on either devic
-
i rented "this is the end" and it never fully downloads just get error msg saying it cant download at this time