P2 card data showing up as Windows bitmap?

I have been using the Panasonic P2 cards for 5 years.  Never a problem until latest update.  Last three edit sessions SOME of the footage is showing up as Windows bit map data.  If I put the same card into FCP 7 they are fine.  What the heck?  Anyone have this experience before?
THANK YOU

Scott,
One thing I do know is that you are NEVER to change the name of that content folder.  Just the fact that someone named it contents-2 worries me.    Each content folder should host all the data inclusively. Not one for audio and one for video.  So, hypothetically, you should be able to access both vidoe and audio in the content folder you can see. I have to assume each content folder has both audio and video.  I am not sure what you should do about that content-2? Not sure why anyone would change the name?  You could copy that content 2 folder for a back up then delete the "-2" to see if it makes a difference.  I don't know but I have a feeling that might be your problem.

Similar Messages

  • Balance Score card data show in aggregation

    Hi All,
    I am developing a score card where I am using a structure which is displaying data in query as follows:
    fiscal period   sales
    007.2007          30
    008.2007          40
    But when I see the same data in score card  it is displaying the sum and that too for all the periods
    006.2007          70
    007.2007          70
    008.2007          70
    009.2007          70
    010.2007          70
    and so on...
    Please quide me in  case i need to some setting for the display.
    Regards
    Rahul Bindroo

    Try the Financial Performance Management forum.

  • Multisession data DVD burned on windows don't show the folders on Mac.

    Hi,
    I think that is a well discussed thread but I weren't able to find anything at this concern on google and this forum.
    I've burned a multisession data DVD on Nero (windows XP). That DVD already have files burned and is multisession. After burn it, the folder that I'd copied on PC don't show up on Mac. Is there a way to burn that files on windows that can be recognised on a Mac? Is this a question of burn format? The parameters of copy on Nero was keep as default.
    Thanks in advance.

    It seems like Mac OS X doesn't support multisession-burnt DVDs, no matter how you put them together. In the best case, you'll only be able to see the first session. Finalizing DVDs has no impact on Mac OS X ability to read them completely.
    I learnt it the hard way when switching from Ubuntu to Mac OS X, while on the first, Nero-burnt DVDs would read flawlessly, finalized or not. I ended up being forced to burn back around 120 DVDs in one session in Nero.
    So far, Apple doesn't seem to have any plan in supporting multisession DVD burning and reading in OS X. As they have a tendancy to ditch obsolete technology sooner than others, I wouldn't hold my breath on it. On a personal level, this lack of support has made my hard drive space needs skyrocket, as I'm no longer able to incrementally burn DVDs, as I always did in Windows and Ubuntu.
    Hope that helps.

  • Bitmap image not showing up on windows title bar in windows server 2012 std

    I have an application written in VC++ (MFC). Its a legacy app. Recently we were asked to check its compatibility with windows server 2012 std edition. We found some issues and one of those is as follows:
    1) We display a BITMAP image using Windows.StretchBlt() function on the titlebar of the app. It shows up properly in windows server 2003, win XP and win 7. But doesn't show up in windows server 2012. I am assuming its a windows paint issue because button
    is there on titlebar as I can click on it and see the expected behavior. But its just not visible.
    Here is some technical workflow:
    -> This function get called to paint the framwnd-
            CMainFrame::OnNcPaint()
                 CMDIFrameWnd::OnNcPaint();
                 // here we have code to paint the bitmap
    Could anyone here please tell me why the same code is behaving differently in win server 2012? Also if there is any solution for this.

    This forum is more of a general purpose forum about Windows Server.  You question is more closely related to programming issues.  You would be better served to post in a .NET development forum.
    .:|:.:|:. tim

  • Why does file date show 1970 on files transfered to iTunes app window?

    I am finding that files transfered to the apps section in iTunes shows last updated time different from the actual file date on the Mac.
    This is happening for both Numbers, Pages and PDF HD . I just did a file sync of a PDF I created and the date in the iTunes window shows 5/27/70 9:00 am (should have been 6/30/10 12:52 pm, the date that is on the original Mac file). Dates vary between 1970 and 1971. There wasn't even a Mac on those dates!!!
    Only one PDF has the correct date which is the iPad Manual (downloaded from Apple). All the files that have incorrect dates were PDF files created from my applications (Finale, InDesign, and DVDpedia). I have tested other downloaded PDFs from other sources and they all show 1970's dates on them in the iTunes App window.
    This really has no real impact other than being able to determine if the most recently created file is the one on the iPad. Now, I have to delete the current file in the iTunes window and add the file again from the Mac finder to be sure. Not at all a good solution.
    Is this an iTunes bug

    On older computers there was a PRAM battery that would last only so long then needed changing. If the battery went dead then when the computer started it would default to a the dates you have noted.
    iTunes will use the current system date to reflect the 'date added' information.
    http://www.macupgrades.co.uk/store/productinfo.php?productsid=314
    MJ

  • Iphone shows up in windows but not in itunes

    I have an Iphone 4s and windows 7 64 bit. I knew there were troubles with win7 and itunes so I waited to try to sync.
    Today I was told that a new version of itunes was out and I could sync my phone now. Installed itunes 10.5.2.11 and my iphone shows up in windows as an iphone but not in itunes. When I run itunes diagnostics it shows itune does not see an iphone.
    Startng to get a little frustrated. I've uninstalled and reinstalled everything a few times, Made sure the services were started, restarted the computer, reset the phone and just about everything else I could think of.

    Here is the diagnotis log,
    Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
    Dell Inc. Studio XPS 8100
    iTunes 10.5.2.11
    QuickTime 7.7.1
    FairPlay 1.13.37
    Apple Application Support 2.1.6
    iPod Updater Library 10.0d2
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 4.0.0.97
    Apple Mobile Device Driver 1.57.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.5.502
    Gracenote MusicID 1.9.5.115
    Gracenote Submit 1.9.5.143
    Gracenote DSP 1.9.5.45
    iTunes Serial Number 0046B0340349A7D0
    Current user is not an administrator.
    The current local date and time is 2011-12-17 03:43:46.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is not supported.
    Core Media is supported.
    Video Display Information
    Advanced Micro Devices, Inc., ATI Radeon HD 5700 Series
    **** External Plug-ins Information ****
    No external plug-ins installed.
    **** Network Connectivity Tests ****
    Network Adapter Information
    Adapter Name:    {B6069F49-70F4-4076-8737-4A17ED82966B}
    Description:    Broadcom NetLink (TM) Gigabit Ethernet
    IP Address:    10.0.0.224
    Subnet Mask:    255.255.255.0
    Default Gateway:    10.0.0.1
    DHCP Enabled:    No
    DHCP Server:   
    Lease Obtained:    Wed Dec 31 19:00:00 1969
    Lease Expires:    Wed Dec 31 19:00:00 1969
    DNS Servers:    10.0.0.1
    Adapter Name:    {59783810-EB0A-42FA-AD8D-2461A5E8E16B}
    Description:    DW1525 (802.11n) WLAN PCIe Card
    IP Address:    10.0.0.12
    Subnet Mask:    255.255.255.0
    Default Gateway:    10.0.0.1
    DHCP Enabled:    Yes
    DHCP Server:    10.0.0.1
    Lease Obtained:    Sat Dec 17 02:58:28 2011
    Lease Expires:    Sun Dec 18 02:58:28 2011
    DNS Servers:    10.0.0.1
    Active Connection:    LAN Connection
    Connected:    Yes
    Online:        Yes
    Using Modem:    No
    Using LAN:    Yes
    Using Proxy:    No
    SSL 3.0 Support:    Enabled
    TLS 1.0 Support:    Enabled
    Firewall Information
    Windows Firewall is off.
    Connection attempt to Apple web site was successful.
    Connection attempt to browsing iTunes Store was successful.
    Connection attempt to purchasing from iTunes Store was successful.
    Connection attempt to iPhone activation server was successful.
    Connection attempt to firmware update server was successful.
    Connection attempt to Gracenote server was successful.
    Last successful iTunes Store access was 2011-12-17 02:24:37.
    **** Device Connectivity Tests ****
    iPodService 10.5.2.11 (x64) is currently running.
    iTunesHelper 10.5.2.11 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    Universal Serial Bus Controllers:
    Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B34.  Device is working properly.
    Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B3C.  Device is working properly.
    FireWire (IEEE 1394) Host Controllers:
    VIA 1394 OHCI Compliant Host Controller.  Device is working properly.
    Most Recent Devices Not Currently Connected:
    iPod touch (4th generation) running firmware version 4.2.1
    Serial Number:    C1XDM990DCP7
    **** Device Sync Tests ****
    No iPod, iPhone, or iPad found.

  • IPod touch 4th generation will not sync with iTunes, but shows up in Windows 7 64bit(Acer Aspire laptop)

    Hello all, I am writing this message in the hope that somebody can help me to solve my issue with my iPod touch fourth generation. It has been unable to sync with iTunes, but shows up in windows as the iPod touch. I also had this problem with my older iPods as well (Ipod nano 4th Gen, iPod touch 2nd gen(Batteries done for that one)) I can sync music with iCloud, but I have a bunch of songs that are not in the store, and I sincerely want to add those, alot.
    I've checked the "iPod appears in Windows but not in iTunes" with the link here: (http://support.apple.com/kb/TS1363), and followed that process, but to no avail, it does not solve the problem. I've tried to reset the entire ipod by making it enter DFU mode and then rebooting the entire iPod (shows up in iTunes in temporary mode) but once restored, does not appear in iTunes, but still in Windows detected still as a iPod, looks like the iPod and everything. I also have the most uup-to-date iTunes installed (10.5 I believe, just got it today)
    This is extremely frustrating because that is why I purchased the iPod (and for the games and apps, those are great too). The iPod was also purchased three days ago, and the setup still didn't detect it.  I am not mad at anybody here or the Apple company itself, but I have not found any help online with the browsing option (for support of course).
    Please, I would absolutely love the help, i'd be eternally grateful for it.
    -Tyler

    Never mind, turns out that by uninstalling the programs "Megakey" and "Megaupload" it had resolved this issue.

  • How do I move Elements 8 projects (slide shows) from a Windows XP computer to new Windows 7 computer that also has Elements 8 on it so that the slides shows will work (Elements 8 works well on the Windows 7 computer & I have done several new slide show pr

    How do I move Elements 8 projects (slide shows) from a Windows XP computer to new Windows 7 computer that also has Elements 8 on it so that the slides shows will work (Elements 8 works well on the Windows 7 computer & I have done several new slide show projects on it)?    I tried backup & restore without success.  I have also found the .psess files and copied them to the catalog in the new computer but when the sides shows are opened none of the images or music is there.  Only the text that I entered shows.  I have even tried to replicate the file paths from the XP computer to the new computer to see if that will help.

    UPDATE:  By a stroke of luck I happened to find a catalog link (a PSE8D file) in the 'My Catalog' file where the imported data was stored.  When I clicked on it to investigate what is was 'magically' all of my transferred projects appeared in Organizer.  Upon further investigation I found that the projects transferred from my XP computer were stored in a hidden catalog that had to be accessed through the Custom Location option in Catalog Manager (accessed by clicking File then Catalog then Custom Location).  No Windows or Elements search revealed this fact.  I am appreciative that I just got lucky.  The Adode/Photoshop company was absolutely of no help.  If fact to me their structure is designed to avoid contact with their customers unless you're buying a new product.  Their products have many good features (even though user unfriendly) and it's a shame they don't value their customers more once the sale is completed. 
    Bottom line:  All of the projects (sideshows) have been recovered and work in my new Windows 7 computer.  I hope my experience helps others. 

  • Ipod shuffle 4th gen charges plays but doesnt show up in windows or itunes

    Ipod shuffle 4th gen charges plays but doesnt show up in windows or itunes tried to check usb driver but computer says it is working properly

    Just disconnecting it without ejecting should not cause permanent damage.  It may cause data corruption, if iTunes was in the process of syncing at the time.  But iTunes should still see the shuffle and (maybe) tell you to Restore it.
    Is it possible that the "accident" damaged the USB cable? 
    Make sure you have done this on the shuffle since the problem occurred
    http://support.apple.com/kb/HT1655
    And you should also shut down (power off) the computer, if you have not already.
    Have you tried more than one USB port on the computer (not a hub if you use one)?  You can also try it with all other USB devices disconnected, except for standard keyboard and mouse (if normally used).
    If those things do not help, what version of Windows do you use?

  • IPOD not showing up in WINDOWS XP

    I have the old 10gig IPOD(non click wheel), it's about 3 or 4yrs old now. For some reason, when I plug it into my computer via firewire, it won't show up in windows, my computer or at all or itunes. It has worked in the past, but all of a sudden it stopped in the past few months. It's frustrating!!! I've reset it, put it in disk mode and it still doesn't solve the problems...anybody have any ideas? Thanks
    eMachines T6212   Windows XP  

    hmmmm. it might be worth checking to see if your Windows is happy with your FireWire card at the moment:
    Making sure your Windows PC recognizes your FireWire or USB card

  • IPod not showing up in Windows explorer / iTunes - not responding to reset

    I have updated my new (1 day old!!) iPod nano to the newest firmware (1.1.1.)... and now I can't use the iPod anymore.
    It doesn't show up in Windows Explorer. When I try to connect to it via Run, it says: 'E:\ is not accessible. The file or directory is corrupted and unreadable'
    When trying to open Windows Explorer, it freezes - not showing any harddrives.
    When trying to connect to it via CMD (dos)... It reads: 'The file or directory is corrupted and unreadable'
    I have tried all the soft resets, hard resets etcetera. I have uninstalled the USB driver for iPod, uninstalled iTunes, reinstalled them both, used different USB ports. But still no success.
    I can't connect to it via iPod Updater, because Windows won't connect to it.
    The iPod itself does respond, although I can't find any data on it anymore.
    How do I get my iPod to work again: connect to my windows / iTunes player? Please, any help is appreciated!
    iPod nano 4GB   Windows XP  

    I have tried all the 'Rs' that Apple recommend. As said, I can't hook up the iPod to my computer. I have tried to reset the iPod manually (holding the select and menu button) - but this doesn't work.
    If there is another (manual) way to restore the iPod, I would love to hear about it.
    As said: as for restoring the iPod - I can't get any contact with my iPod with my computer at all.

  • How to show refreshed modal window(2nd report region window) - reposting

    Hi,
    I have a requirement where i scroll thru different rows in grid region.
    Moment I tab out from first row, I pop up 2nd report, where I show related detailed data lines for the tabed out line of first grid.
    So my 2nd window is a report region query, whose 'where' clause contains the primary key from the row of first grid window.
    On tab out of a row of first window, I have a javascript function, which shows 2nd report region using:
    var mywindow =
    window.showModalDialog
    ('http://MY-URL-/ebus/apexQA111/f?p=&APP_ID.:25:&SESSION.',myObject,'dialogWidth=800px;dialogHeight=300px;dialogLeft:50;dialogTop:50');
    Problem:
    On First tab out, I get the correct data display on 2nd window, which is related to current tabbed out row.
    However, If I tab out from next record, modal window pops up and it still shows my detailed data of first tabbed out row.
    Somehow the 2nd window is not getting refreshed/recalculated based on my new tabbed out row. I only have showmodaldialog in my JS function.
    Anyway to refresh the window based on new values of the where clause variable? and then showing the window?
    Please help!!
    Regards,
    Ravi.
    Edited by: Rave on Nov 26, 2009 6:15 AM

    Hi Rave,
    You can refresh any window with the java script below, just make it conditional on the value of an item within your page so that it dose not run every time the page is loaded.
    if ($v('P1_MY_ITEM') === 'foo' ) {
    window.location.href = document.location.href;
    }

  • After Successfull Load ETL for General Ledger No data showing in Warehouse

    After Successfull Load ETL for General Ledger No data showing in Warehouse Tables
    DB Version # 11.2.0.1.0 and OS of Warehouse Microsoft Windows Server
    2003 R2 Enterprise Edition Service Pack 2, v.4922
    1. BI Apps version
    Release 7.9.6.3
    2. BI Apps module
    Financials
    3. Source system and version
    EBS R12.1.2
    Please help me out .......

    Hope you have done finance config as per the link
    http://docs.oracle.com/cd/E20490_01/bia.7963/e19039/toc.htm
    List out the tables with row count=0, get the sql override query and execute in source to see # records for tables ending DS or FS where row count=0
    do the same for tables ending with _D using warehouse db.
    If fact tables are getting 0 records check the w_day_d table.
    let me know updates.
    If helps pls mark.

  • Issue while Installing Oracle Data Access Software for Windows

    All,
    Iam getting the following error while installing Oracle Data Access Software for windows. Iam installing in WindowsXP, with Oracle 9i release 9.2.0.7.0 DB and client in the same Box.
    It shows
    The Specified Key key was not found while trying to GetValue
    * Stop installation of all Products
    * Stop installtion of this componenent only.
    Kindly let me know why this error is showing up.
    Regards
    Ramesh

    Most probably you have hit this issue:
    "If you have more than one Oracle Home installed on the same machine (e.g. Oracle8i client and Oracle9i Release 2 client), use the Oracle Home Selector to run your applications with Oracle9i Release 2 client. "
    As documented on the Oracle Data Access Software for Windows. Release 9.2.0.4.0
    ~ Madrid.

  • Issue inserting UTF8 data into Oracle in windows environment.

    I have a UTF8 PHP application that is writing a string containing special characters to oracle through a ODBC connection. The Oracle database is setup for UTF8 support.
    Here is the issue. I have a simple string, "louis de funès". When the data manually moved correctly in UTF8 the data comes up correctly. The Oracle dump() shows:
    WORKING DATA:
    String: louis de funès
    select keywords, dump(keywords, 17) from ame_links where keywords like '%louis de %';
    Typ=1 Len=15: l,o,u,i,s, ,d,e, ,f,u,n,c3,a8,s
    However, when the same string is Inserted through the PHP application the data shows up in the db like this.
    NOT - WORKING:
    String: louis de funès
    select keywords, dump(keywords, 17) from ame_links where keywords like '%louis de %';
    Typ=1 Len=17: l,o,u,i,s, ,d,e, ,f,u,n,c3,83,c2,a8,
    (The è character has 4 bytes associated with it)
    Windows Setup:
    Windows Registry: HKEY_LOCAL_MACHINE -> SOFTWARE -> ORACLE -> HOME0 ->
    NLS_LANG=AMERICAN_AMERICA.UTF8
    HTTP headers are set for Content-Type:text/html; charset=UTF-8.
    Anyone know why I would get 2 extra bytes (83,c2) added in the middle of the è character? Is the oracle client doing some other type of character set conversion before I insert it into the database.
    I have also noticed that when I change the NLS_LANG from AMERICAN_AMERICA.UTF8 to AMERICAN_AMERICA.WE8MSWIN1252 that the 4 byte 'è' character works and the 2 byte character doesn't.

    I reproduced the porblem. Only differnce from yours is that it reproduces regardless the NLS_LANG setting.
    Although I cannot be 100% sure, I think what is happening is that Microsoft ODBC Driver Manager converts the insert statement from Windows ACP to Unicode, then calls SQLExecDirectW (WideChar version of SQLExecDirect) of the Oracle ODBC Driver and passes the insert statement in Unicode. Since your PHP code passed the insert statement in UTF-8 encoding, and the Driver Manager converted it from Windows ACP to Unicode, the letter e with grave ("c3,a8" in UTF-8) was wrongly converted to U+00c3, U+00a8 in the Unicode insert statement, then converted to UTF8 ( "c3,83,c2,a8") by Oracle.
    By looking at the PHP source code, apparently PHP odbc_exec() function calls ANSI SQLExecDirect().
    I tried to verify that the Driver Manager calls SQLExecDirectW() of Oracle ODBC Driver by enabling the ODBC Tracing, but I couldn't make it work. It genetates an emply SQL.LOG file. So my investigation stops here.
    IF YOUR METADATA NAMES ARE ASCII ONLY, AND NON-ASCII CHARACTERS APPEAR ONLY IN DATA, you can workaround this problem by binding data. For example,
    $stmt = odbc_prepare($conn, "insert into AME_LINKS (keywords, site_id) values (?, ?)");
    $rs = odbc_execute($stmt, array($invar,77));
    Makoto

Maybe you are looking for