P2 Card Spanned Clips will not import to FCP

First of all I'm not even really sure why all of my clips that are over 10 minutes say "spanned" but second of all they will not import to Final Cut Pro. When I do Log and transfer, it pretends like it is working but when it is finished all it gives me is a red "I did not work" exclamation point. Can Anyone Help me?

P2 cards are formatted with an offshoot of FAT32, which has a 4GB limit. So anything over 4GB, will be broken up into multiple parts.
#36 - One or More P2 files failed to import.
Shane's Stock Answer #36 - "One or more clips failed to import..."
Very often in the field with this camera the camera operator will delete clips from the P2 card that they just don't like. That is the beauty of this camera. But, the still for that video file (located in the CLIP folder in the CONTENTS folder)...the still that you see when you are in the P2 Import window...is not deleted. So you will see the image, and the name, but the video file would have been deleted.
What you can do it compare the file names in the VIDEO folder and CLIP folder and see if anything is missing. If something is, then you know what the problem is. You can then just import the rest a few at time, skipping that one.
ALSO...in the P2 Import window...in the P2 Browser, there is a little sprocket drop down menu. Click on that and choose PREFERENCES. Uncheck REMOVE PULLDOWN and then try importing again.
ALSO...make sure your file names aren't too long. Try shortening them and see if that works.
ALSO make sure that the folders that contain the CONTENTS folder doesn't have any odd characters like /!@#$%^&*()?.
Shane

Similar Messages

Long clip will not import from P2

I have a 26 minute interview just shot on P2 as well as some shorter b-roll clips. I'm trying to import them into FCP. The short clips all come in fine. The interview clip acts like it's importing, but when the transfer bar completes, nothing shows up in the browser.
I can see and play the interview in the P2 import window fine.
Anyone have an idea of how I can fix this? Any help greatly appreciated!
thanks!

#36 - One or More P2 files failed to import.
Shane's Stock Answer #36 - "One or more clips failed to import..."
Very often in the field with this camera the camera operator will delete clips from the P2 card that they just don't like. That is the beauty of this camera. But, the still for that video file (located in the CLIP folder in the CONTENTS folder)...the still that you see when you are in the P2 Import window...is not deleted. So you will see the image, and the name, but the video file would have been deleted.
What you can do it compare the file names in the VIDEO folder and CLIP folder and see if anything is missing. If something is, then you know what the problem is. You can then just import the rest a few at time, skipping that one.
ALSO...in the P2 Import window...in the P2 Browser, there is a little sprocket drop down menu. Click on that and choose PREFERENCES. Uncheck REMOVE PULLDOWN and then try importing again.
ALSO...make sure your file names aren't too long. Try shortening them and see if that works.
ALSO make sure that the folders that contain the CONTENTS folder doesn't have any odd characters like /!@#$%^&*()?.
Shane

Spanned Clip will not log and transfer

The editor:
Mac Pro 10.4.11
FCP 6.0.2.
Quicktime Version 7.4.1 (14)
30 minutes of video shot to a P2 card on an HVX200 is unable to log and transfer. Plays fine in the browser and on camera.
Workflow tried:
Write protect P2 and connect HVX200 to Mac via firewire.
Set scratch disk, then log and transfer (clip says spanned).
Error (red caution sign, tried retry, same error).
Tried P2CMS to ingest footage on a firewire drive, then log and transfer, same error.
Any suggestions?
Message was edited by: bpistone

One word for ya: Raylight.
I had the same problem. I tried P2CMS, renaming, and any trick I could think of. Raylight to the rescue. It creates a "pointer" MOV file to the actual P2 media and then you simply import the Raylighted MOV files into FCP. No data loss, and way quicker than a P2 transfer.
Well worth the money.
http://www.dvfilm.com/raylight/
Cheers.

Iphone 5 videos from iPhoto will not import into FCP

Just bought FCP X and tried to import movies from iPhoto taken with my iPhone 5 and get a message that the file format is not supported. Any suggestions?

To late. The videos were downloaded into iPhoto and removed from the iPhone. I actually exported the videos to my desktop then imported them into FCPX without any problem. It would seem to me that I should be able to import directly. The video format (in iPhoto) is supported according to the apple web sight. Any thoughts?

Adobe LR3 will not import image files. Running on Mac OS 10.6.4

When I try to import images into LR3 I get the errors show on attached screenshots. Anyone know how to fix this?

I'm having the same problem and I'm running LR3 on Mac OS 10.6.4 as well.
I put my SD card into my iMac's SD card slot, and tried to import into LR3, but got an error that all of my new files were not imported because they "...could not be read (17)". They can be read just fine by GraphicConverter. I shoot RAW+JPG and LR3 will not import either version (e.g., if I remove the .CR2 files from the SD card, LR3 won't read the .jpgs either). I also put the SD card into a reader (instead of into the iMac's SD card slot) and that didn't work.
I copied the RAWs to the Desktop and tried to import from there, but in that case I get a message that the import operations were not performed because "a file could not be copied to the requested location (34)".
I imported images from this SD card on the 5th, and I haven't formatted it since then. The only thing that's changed that I know of is the Mac OS update, but I would expect that if that were the problem, I wouldn't be able to read these files anywhere (i.e., GraphicConverter).
Any suggestions?
Update: I've now tried another SD card, and a CF card, and LR3 will not import any of the files on them - I get the same "...could not be read (17)" error. I have repaired disk permissions, and I've trashed the Lightroom 3 preferences.
Update #2: I've deleted and re-installed Lightroom 3, and I still cannot import any new images. Lightroom 2 imports just fine. This is becoming infuriating.
Anyone have any suggestions yet?

Lightroom 3 will not import any images

[I replied to another thread, but it doesn't seem to be coming up at the top of the post list when I update my information, so I'm reposting in the hopes that someone will notice and offer some helpful advice, as this is rapidly becoming infuriating.]
I'm running LR3 on Mac OS 10.6.4.
I put my SD card into my iMac's SD card slot, and tried to import into LR3, but got an error that all of my new files were not imported because they "...could not be read (17)". They can be read just fine by GraphicConverter and Lightroom 2. I shoot RAW+JPG and LR3 will not import either version (e.g., if I remove the .CR2 files from the SD card, LR3 won't read the .jpgs either). I also put the SD card into a reader (instead of into the iMac's SD card slot) and that didn't work.
I copied the RAWs to the Desktop and tried to import from there, but in that case I get a message that the import operations were not performed because "a file could not be copied to the requested location (34)".
I imported images from this SD card on the 5th, and I haven't formatted it since then. The only thing that's changed that I know of is the Mac OS update, but I would expect that if that were the problem, I wouldn't be able to read these files anywhere (i.e., GraphicConverter).
Update: I've now tried another SD card, and a CF card, and LR3 will not import any of the files on them - I get the same "...could not be read (17)" error. I have repaired disk permissions, and I've trashed the Lightroom 3 preferences.
Update #2: I've deleted and re-installed Lightroom 3, and I still cannot import any new images. Lightroom 2 continues to import just fine.
Anyone have any suggestions?

OK, I _think_ I have the cause & cure.
Cause:
Canon says the software [firmware?] bundled with the Canon Rebel XT "is not fully compatible with the latest version of OSX." I can continue to automatically bring up iPhoto or use ImageCapture, in any case. Thanks, but I want LR3. Canon recommended that I set the controls in ImageCapture to specify opening LR3 when a camera is detected. I did, but it was doing this before, so I saw no difference. Also, I'm not sure it was doing it reliably, before or after this change.
This software incompatibility might explain why the Canon Rebel XT was not loading into LR3, but would not explain why it was not recognized by the Finder to add to the Devices list. The Canon wouldn't get added to the Devices list in OSX 10.4.11, either.
ImageCapture could easily see the images on the camera, and could copy them to a HD without difficulty. But it's not LR3, and nothing convinced the Finder to add the camera to the Devices.
Cure:
What I did find, eventually, as a method for persuading LR3 to import properly is this:
I set ImageCapture to open itself when it recognizes a camera.
I jack in the camera, and ImageCapture opens.
THEN I open LR3. It comes up with the present images in the library.
I _click_ on the Import button (lower left), OR use the keyboard command (cmd-shift-I). It opens the import display, _with_ the images from the camera.
I set the LR3 import settings as I want them - I Copy the files, change file names, presets, etc. as desired. (I make a habit not to erase the camera files, until all is said and done, and the camera is disconnected from the computer.)
I click the Import button, and it does!
SUCCESS!
If I have it open ImageCapture first, that seems to persuade LR3 that images are on the camera.
Sometimes iPhoto accomplishes the same end, but I'd rather not launch that - subsidiary issues.
I went through this sequence a number of times, starting from neither software open. I tried different sequences - LR3 then ImageCapture, camera first or last, etc. The above sequence worked reliably; the others' responses confused me.
Those of you with similar Canon uploading problems, see if this helps any. If you don't have ImageCapture, try it with iPhoto instead. Just open it first.
sandrift71, does this answer your original question & resolve the problem for you?
Message text clarified - edited by: Jay_Warner

IMoive Quicktime not importing to FCP

Hello,
I have a quicktime that was created in iMovie that will not import into FCP. Any recomendations on exporting this differently or what exact format FCP will recognize the quicktimes as when they were created in iMoive?
Sara

When I open the quicktime, I "export.." and I only have 10 options or so. Highest quality DV isnt one of them.
Which one do you think is right? I already tried Q Movie.
Movie to:
3G
Apple TV
AVI
DV Stream
FLC
Hinted Movie
Image Sequence
iPhone
iPod
MPEG-4
Picture
Quick Time Media Link
Quick Time Movie
AIFF
AU
WAVE

Lightroom will not import my photos. It did up to a week ago. I have changed cards and cameras (both worked two weeks ago). I can import the photos to Picasa and iPhoto

Lightroom will not import my photos. It did up to a week ago. I have changed cards and cameras (both worked two weeks ago). I can import the photos to Picasa and iPhoto. I get the following error message:
Some import operations were not performed.
The following files were not imported because they could not be read [followed by a list of the files I wanted to import]
Thumbnails show up. LR just will not import them.
Any idea what is going wrong?

If the Import button is not clickable, that means that Lightroom thinks you have no new photos to import (one possible reason is that they are duplicates)
So, you need to figure out why Lightroom thinks that. The way I would do this is to search your Library module for at least one of the photos, by file name. To do this, you would follow all 4 of these steps in sequence:
Click on All Photographs in the Catalog Panel on the left of the Library Module
Turn off all Filters (Ctrl-L or Cmd-L once or twice)
Expand all stacks: Photo->Stacking->Expand All Stacks
Search for one or more of the photos using the Filter Bar (press backslash), search by File Name

Why does iPhoto not recognize the .jpg pics from a Kodak C875 now? I can stick my memory card in the iMac and import them that way, but iPhoto will not import the pics from the camera.

Why does iPhoto not recognize the .jpg pics from a Kodak C875 now? I can stick my memory card in the iMac and import them that way, but iPhoto will not import the pics from the camera.

There have been many issues reported with Kodak cameras - serach the forums for them
Actually the best practise is to use a card reader to import your photos, verify that they are imported ocrrectly and wait at least one backup cycle and then use the camera's format command to reformat the card and erase it - this assures no lost photos and always having the card properly formatted
LN

Used a new Sony SCHD card and my iMac will not import. It's just a spinning carousel

Trying to import video from my new Sony ScHD card from my panasonic camera and it will not import. It just spins away with no progress. SD card is in the Mac Final cut is open but will not download.

Open Console in Utilities & see if there are any clues or repeating messages when this happens.

Trial version of Lightroom 5 will not import from a media card [was: Terrie]

I have the trial version of lightroom 5 & it will not import from a media card

Do you mean that the automatic import dialogue box does not appear?
Or something else?

Solution when iMovie or FCE will not import AVCHD files or MTS files

Problem: iMovie or FCE will not import your footage from SDHC camera with files in AVCHD structure, or cannot import .mts or .m2ht files (which you may have copied from AVCHD structure. When mounting camera, you can see the camera as disk but iMovie will not try to import footage. If you point Final Cut Express (FCE) to the file structure, it fails to recognize it as a valid file structure. (I have Canon HF10, but understand that this problem is common on many camera models, maybe camera has been turned off at the wrong moment?)
Cause: Faulty file structure on camera or disk
Soultion: Rebuild AVCHD file structure using an AVCHD editing tool. I found multiAVCHD (multiavchd.deanbg.com), which is not perfect, but will do the job. And it is freeware (possible to donate).
I would like comments about others experience - but at least this worked for me:
- Download and install the software (Yes, you need Windows)
- Set the right parameters: mostly default, I didn´t want any recoding. But tick off to keep the source files!
- Select the AVCHD source (or source .mts or m2ts files) and destination
- Start rebuilding: select output for Sony Playstation 3
- Put the AVCHD file structure on a USB stick
*If using iMovie:*
Start iMovie and plug the USB into the mac (virtual disk (.dmg file) or other media should work fine as well). The USB may contain other files as well, but the root of AVCHD must be named AVCHD.
iMovie recognizes the drive as a camera. All is not 100% well, as the dates for making the footage is lost, and the thumbnails are distorted if seen at all, until clicked on. But then import worked for most clips. Some clips gave an error message, but FCE was able to import these (Log&transfer).
*If using FCE:* Use Log and transfer on this file structure (need not be on external disk)
If you have a better solution - please share! I suppose there are other tools out there which may correct the file structure with less side effects and no errors.
If you go for this solution - remember the author of multiAVCHD, he will surely appreciate a donation. I guess everybody will agree that this is worth at least as much as you paid for your SDHC card.
Why a function to correct faulty file structure is not included in iMovie and FCE is beyond my understanding!
I notice many users salvage their footage by converting the .MTS files, using Handbrake etc. But I believe rebuilding the file structure is faster and with no quality reduction.

Hi everyone,
I'm hoping someone is still subscribed to this and can help.
I have a Sony HDR-SR10. Yesterday I was able to connect it to my iMac by USB and view all the footage in the import window of iMovie (08).
Last night, to save time sorting at home, I took it to work with me and using the software that came with the camera installed on a Windows PC went through to see which files were rubbish and could be deleted before importing to speed up the transfer on to my mac.
Today, my Mac won't recognise the Camera!?!?!?!
Have I inadvertently reformatted the .MTS files or the camera itself, to windows or something? CanI change it back??
I'm currently creating a new disk image of the camera on my Mac in the vain hope that it will work and be recognised by the Mac as a camera. I can see from the progress box the following text:
Creating Image "Sony Camcorder Media.dmg"
=====Progress Bar=====
Reading (WindowsFAT32 :1)...
Which is why I think I've done something seriously wrong!! .. because it mentions windows!
HELP! HELP! HELP!
I have my entire honeymoon and the first year of my son on this camera and I want to edit with iMovie! Especially as I just paid for iLife 09 upgrade!

Edited clips will not open with other apps

After editing video clips using Adobe Premiere Elements, clips will not open with other apps (like VLC, Media Player, etc...)

Sherbowe
Just saw your post and wanted to leave a just in case note.
From the information that you and John T. Smith just exchanged, it would appear that you attempted to play back the saved project file (project.prel) with your VCL Player and Windows Media Player. You need to export the Timeline content to a file format that is supported by the player of your choice. By now, you have probably been there and done that.
This is the just in case note about projects and their project.prel file....let us say that you have two separate projects and you decide to put the content of one project into another. Cannot do. One cannot import a project.prel into another project.prel. You would have to export the Timeline of one and then import that export in the other project. Alternatively, those with Premiere Elements 8.0/8.0.1, 9.0/9.0.1, and 10 could use the ClipMate program to copy/paste between programs without issues. However, with Premiere Elements 11 there are some problems in that regard.
ATR

IPhoto 6.06 Will Not Import RAW CR2 files Taken Through an Uncoupled Lens

If I use adapters to couple my Canon 20D to a telescope (which is an electronically uncoupled lens and has no lens-related exif data), iPhoto freezes and will not import a RAW Canon CR2 file taken through any telescope. It imports such jpegs just fine, and Preview can open either. iPhoto, however, must be forced to quit under the Apple menu.
It doesn't matter where the RAW file is...in the camera, on the desktop, in a card reader, or on a CD.
This is an obvious bug in iPhoto.
Regards,
Don
MacBook Pro Mac OS X (10.4.9) 2G Core Duo; 1 G RAM

Do you have access to an Apple store, or a friend
with Aperture? It would be interesting to see if
Aperture has the same problem.
Not that it really matters, but a bug in both
iPhoto and Aperture is more likely to be fixed!
I don't know anybody who uses Aperture, and my nearest Apple Store is 120 miles away in Cincinnati.
I'm able to work around the problem since Canon's Digital Photo Professional, working with Canon's EOS Utilty, imports and processes these images just fine, as does Photoshop CS.
However, I miss the premise that iPhoto should be the central organizer and storage vessel for all of one's digital photos, making naming, finding, and backing them up a snap, even though a different program may be used for processsing them.
As an aside, Canon's download site warns that EOS Utility 1.1.1 will not work on Intel Macs; it does...with full functionality.
Thanks for your response.
Don

Lightroom 5 will not import selected images from my SD

Lightroom 5 will not import selected images from my SD card on my IMac . My Camera is a Canon 650D it will open them on my pc copy. My Lightroom 4 on my IMac will also import from an sd card. Help please.

Why not? What happens? If there is an error message, please quote it in its entirety, word-for-word, verbatim.

P2 Card Spanned Clips will not import to FCP

Similar Messages

Maybe you are looking for