P2 Editors - Little help - Is this a Known Issue?
Does PPro crash with large P2 files?
Just upgraded our systems to cs5.5 - They all crash when playing P2 AVCIntra 100mbs files larger than 4gb. Tested on three different PC's and any P2 file that is larger than the base 4gb crashes PPro 5.5 while scrubbing through timeline - but the same files work fine on those same PC's while in PPro 5.0.
Its been many days since i last spoke with Adobe tech support (no surprise there - they were going to get right back to us while raising the case to tier 2 support) - and seemingly wasted 14 hours over three days with them prior to that.
Also, understanding the P2 file structure, do your video files within PPro show the full amount of all the files within a clip? or should it just show as 4gb?? -- when, in this case, most are 20 -30gb. Both our 5.0 and 5.5 systems show 4gb even if they are more.
Thanks for any input or quick testing anyone might do on this?
Thank you for the replys guys!
Jim, I am not sure what you mean but I believe that I understand the P2 file structure and the 4gb limits of fat32 - and the spanning.
Heres whats happening:
Direct copy and paste via laptop from P2 card (recorded by HPX370) to PC hard drive.
AVCIntra 100mbs files imported through media browser
Clips play fine in the preview monitor- no crash from preview monitor. (i understand that the preview monitor is a totally different animal than the timeline playback)
PPro crashes while scrubbing through the totality of these long clips on timeline - Sometimes it takes 40 or 50 secs but eventually it always crashes when moving the cti around that long clip.
If i am careful, i can keep it from crashing by not being aggressive with scrubbing. I assume that if I manage to stay in any one 4gb chunk its ok with that but once I start going from one end of the clip to the other quickly it crashes. No blue screen just PPro stops working.
Note: Any clip that is shorter than the 4gb has no issue. And I have duplicated this same issue on three very different rigs - I know that sound nuts, I am baffled as well.
To be clear on the file size - All the project panel information is complete and correct- timecode, duration etc. But, any clip which is longer and larger than 4gb only shows as 4gb when right click to properties. - thats actually technically correct, but its been a topic of discussion as to whether or not it should show the size for that file - OR the size of all spanned clips??? I have been working with P2 for four years and have never seen it read larger than 4gb - I bet if you checked you might find it the same? All that said, I dont know that that is an issue or even related to my real problem of crashing while scrubbing on the timeline.
Might one of you be able to test a large clip and let me know what the properties of the file in the project panel show as? - It'd be great if I could rule that out.
Thank You!
Similar Messages
-
Since upgrading to Mavericks, Mail is extremely slow to load the preview pane or show email when mailbox is double-clicked. Is this a known issue? Or is there a solution to this issue?
Hi AngieLynch,
Thanks for visiting Apple Support Communities.
It sounds like you're seeing some unexpected behavior in Mail.
Before troubleshooting on your computer, I'd strongly recommend backing up your data to an external hard drive with Time Machine, if you haven't already. This article can help with setting up Time Machine:
Mac Basics: Time Machine backs up your Mac
http://support.apple.com/kb/ht1427
Next, try creating a new user account on your computer. You can add your email account to Mail in the new user account. If Mail is more responsive in the new user account, then Mavericks is working fine and the behavior is caused by conflicts in your own Mail or user account.
These articles walk you through creating a new user and setting up Mail:
OS X Mountain Lion: Create a new user account (applies to Mavericks, too.)
http://support.apple.com/kb/PH11468
Configuring Mail for your email account
http://support.apple.com/kb/HT1277
Best,
Jeremy -
Verified FTP settings with my hosting at Godaddy. Adobe Muse CC (2014) says it can't sign in with the credentials provided. Therefore, I can't use the new In-browser editing feature. Is this a known issue?
There is a default port,for most of the FTP sverver, is 21(or 20 maybe), then you can access FTP with " ftp.your_domain".
But for some reasons, the hosting providers change the port to other number, 2100 for example, and the FTP address will be "ftp.your_domain:2100". In this case, you can upload your site to FTP in Muse, but u cann't login your FTP in Adobe® Muse™ CC In-Browser Editing ,because you cann't input the port number (:2100). -
Firefox 4 Menu Bar - When I hover over or select a menu bar item, the menu bar sub-menu becomes transparent and unreadable. Is this a known issue that can be corrected with an update or is it functionality that is not designed to work with this version?
If this happens on monitor 2 of 2, this problem has been solved here:
http://support.mozilla.com/en-US/questions/794823#answer-157988
Go to "Firefox"--> "Options" --> "Advanced"
Then un-check "Use hardware acceleration when available"
While not verified, I believe this problem is due to an SLI configuration where the focus is on monitor 1. (I.e acceleration is available, but only on monitor 1.) -
I'm trying to update a Macbook Pro with 10.6.3. The latest using Software Update does not complete downloading. After 475 Mb an error message says it can't connect to the update server. I tried incrementally updating to 10.6.4. It downloads, starts to install, and just before finshing the install gives a "software error" message and quits. Is this a known issue, and how can I get around it?
Try running the combo updater.
10.6.8 Combo Updater -
I recently upgraded my Mac Book Pro to Mountain Lion mainly to get the notes app. Notes synced once then no more. I have notes turned on in system preferences. Any ideas? Is this a known issue?
http://fpdownload.macromedia.com/get/flashplayer/pdc/11.3.300.271/install_flash_ player_osx.dmg
-
After yosemite upgrade junk mail does not work - is this a known issue
after yosemite upgrade junk mail does not work - is this a known issue?
Yes, it is a problem.
-
Using Acrobat Pro X on windows 7. The replace pages feature does not work. Is this a known issue? Is there a fix?
Hi Todd,
I haven't heard other reports of this (though there was an issue quite some time ago where deleting pages on this combination of Acrobat/OS was challenging).
Can you please tell me what happens when you try to replace pages? Do you get an error message? Are you able to manipulate pages otherwise (delete, extract, and so on)? Is this issue unique to one file, or does it happen with all PDF files?
I look forward to hearing back from you.
Best,
Sara -
Since upgrading to iOS8 on my iPhone 4s and iPad 2, the Airplay option has disappeared, is this a known issue?
If you don't see the AirPlay icon in Control Center:
1. Turn off router, Apple TV and iPad
2. Turn on router and then wait 30 seconds for it to complete start-up process
3. Turn on Apple TV and then wait 30 seconds for it to complete start-up process
4. Turn on iPad and test AirPlay -
I need a little help with this MS-6380E
Hi my name is AttA. Im trying to help out a friend get hism PC back up and running. He is a new user type and has generaly screwd his pc up just being a newbie. He asked me to Format his PC And reinstall his OS, and now here i am wonering what the heck is going on.
I first tried to install Win XP pro on his PC with all the hardware in it, just like it came to him when he got it.
When the XP pro setup gets to the Copying files section it locks up. There is no specific file it locks on up, sometimes it will do it at 3% sometimes at 17%. It has never made it through coping the files. At this point i decided to return the PC to minimum spec and try it out. Ive removed all of the expansion cards, replaced the AGP GEforce TI 4600 with an old 8 meg PCI card, removed the front USB from the board, ive taken out all but 1 stick of RAM that i know to be good. Ive also loaded Bios Defaults.
At this point the Specs on the PC are as follows.
Athalon 1150 CPU (As reported by the Bios)
MSI MS-6380E (although the pic of the board contained in the instruction manual looks nothing like the real thing,)
IBM Deskstar 40 Gb
Floppy Drive
1 Yamaha CD-RW 20/10/40 (yes ive tried other known working non writing drives.)
1 stick DDR 2700 256mb
Keyboard and mouse ive tried 4 sets both USB and PS/2
Alliedc Pwr Supply 300W
I have scanned for Viri as well as tried the drive on both busses.
Im hoping some1 can give me a clue as to what is happening.
Thanx for your help in advance.
AttA
PS pls excuse typos my keyboard at work is not the natural im used too.Ok so ive done more. mabey this will help.
Ive tried changing the RAM.
Ive tried A CMOS reset.
Ive tried A new CD-ROM as CS on the secondary and slave to the HDD on the primary
Here is the one i dont get. Ive tried installing Win98. and it worked. the disk my frind has is near pristine one scratch and not nearly enough to account for multiple lockups while dealing with random files. i suppose is possible, so im gonna try XP with a different disk if i can find one.
I even thought well mabey its got some kind of strange super virus and its surving the format fdisk and fdisk /mbr. So i put the HDD in a G4, knowing that a mac would erase the complete drive with out any care for boot records or any other PC crap. nothing still locked up, although that time i copied 56% of the files before it locked up. thats the best run yet ;(
Thank you for the reply Mrplow that is one thing i definatly did not try that one. Ill make sure to do that tomorrow and see what happens. When your FSB reverts to 100, do you have problems like this?
AttA -
Hi, after a little help editing this lettering.
Hi all, I've currently got some standard lettering opened in adobe illustrator in font 'copper'
I'm looking to cut this out on my plotter and have tried this (length of vinyl is around 10cm.
When weeding the material, it's pretty difficult and some lettering lifts up with the vinyl so what I'm looking to do is add block line at the bottom 10th of the lettering.
This line will hold all the letters together.
I know I could simply add a rectangle but I'll need the bottom 10th of the lettering removed so it is not cut on the plotter.
Please help with what I can do
Thanks,If I understand correctly, and I appologize if I don't, I think the following process will work.
I'm assuming the vinyl cutter follows the paths of the font, and if you draw a rectangle over the font to "connect" the letters, the path of the font is still active, so the cutter still follows that path and defeats the purpose of adding the "connecting" rectangle.
I would:
1. Outline the text.
2. Draw the rectangle "connecter" over the outlined text.
3. Select the rectangle and text and use the Unite function in the Pathfiner menu.
4. This will, well, unite the shapes so the paths around the text that crosses over the rectangle will be eliminated.
Hope this is on the right track and is of assistance. -
Need a little help with this code
Hi,
right now I'm going through the xmlmenu tutorial, which I've
found at kirupa.com. It's pretty much clear to me. Then I decided
to try to import a blur filter. And as soon as I wright the import
flash.filter line, I get a syntax error. Where is the problem? How
do I get button's blurx/y = 0 onRollover? I was thinking to apply
the filter to menuitem mc (see the code)
Here's the codeyes, you are right - flash.filters. Another "syntax error"
;-). I did manage to get it work (the import line part). My next
question is to which MC must I apply the blur filter to get next
result:
by default the buttons are blured. OnRollOver the button gets
cleared of blur. Here's my blur code:
var myBlur = new flash.filters.BlurFilter(20,20,2);
var myTempFilters:Array = _root.mainmenu_mc.filters;
->which MC must be here to get the wanted result??????
myTempFilters.push(myBlur);
_root.mainmenu_mc.filters = myTempFilters;
curr_item.onRollOut = function() {
myBlur.blurX = 20;
myBlur.blurY = 20;
this.filters = new Array(myBlur);
curr_item.onRollOver = function() {
myBlur.blurX = 0;
myBlur.blurY = 0;
this.filters = new Array(myBlur);
THX for your help -
Little help with this regular expression ?
Greetings all,
My string is like "P: A104, P105, K106" and I tried to split it using following regular expression ,but seems even though it returns 'true' as matched, it does not split the string.
Finally what I want is String is array like {"P:","A104","P105","K106"}
What seems to be the problem with my regular expression?
String PAT1="[a-zA-Z]:\\s([a-zA-Z]\\d{1,}([,]\\s)?)*";
String inp="P: A104, P105, K106";
Pattern p=Pattern.compile(PAT1);
System.out.println(p.matcher(inp).matches());
String strs[]=inp.split(PAT1);
for(String s:strs){
System.out.println("part "+s);
}pankajjaiswal10 wrote:
You can also use split(":|,")No, that will remove the colon and leave the whitespace intact. My understanding is that the OP wants to keep the colon and remove the commas and whitespace. I would use this: String[] strs = inp.split(",?\\s+"); -
Need a little help with this factory pattern thing..
Evening all,
I have an assignment to do over easter, before i start i will say i dont want any code or anything so this isnt 'cheating' or whatever..
This was the brief:
A vending machine dispenses tea and coffee, to which may be added milk, and 0, 1 or 2 doses of sugar. When the machine is loaded it initially contains 100 doses of tea, 100 doses of coffee 50 doses of milk and 70 doses of sugar. After it has been in use for a while it may run out one or more items. For example, it may run out of sugar, in which case it would continue to vend tea, coffee, tea with milk, and coffee with milk. Periodically, an attendant recharges the machine to full capacity with doses of coffee, tea, milk and sugar. A user selects the required beverage, selects the required amount of sugar, and selects milk if required. The machine responds with a message telling the user the cost of the drink (coffee is 30P, tea 20P, milk 10P, and sugar 5P per dose). The user inserts coins (the machine accepts 10P and 5P coins), and when the required sum or more has been inserted, the machine dispenses the beverage, and possibly some change.
You are to write a program that simulates the above vending machine. Your solution must use the class factory pattern, and make use of the code templates provided. The user interface should be constructed with a Swing JFrame object.
We were suppled with code for all of the classes required except for the JFrame.. They are as follows:
public abstract class Beverage
int sugar;
boolean milk;
public String getMessage()
String name = this.getClass().getName();
String sugarMessage = "";
if (sugar == 1) sugarMessage = "one sugar";
if (sugar == 2) sugarMessage = "two sugars";
if (sugar == 0) sugarMessage = "";
return "Vended 1 " + name + (milk ? " with milk " : "") + (sugar==1 || sugar == 2 ? (milk ? "and " + sugarMessage : " with " + sugarMessage) : "");
public class Coffee extends Beverage
public Coffee( int sugar, boolean milk)
this.sugar = sugar;
this.milk = milk;
public class Tea extends Beverage
public Tea(int sugar, boolean milk)
this.sugar = sugar;
this.milk = milk;
public class SugarButtonsGroup
private JRadioButton jRadioButton0Sugar = new JRadioButton();
private JRadioButton jRadioButton1Sugar = new JRadioButton();
private JRadioButton jRadioButton2Sugar = new JRadioButton();
private ButtonGroup sugarButtons = new ButtonGroup();
public SugarButtonsGroup()
jRadioButton0Sugar.setText("No sugar");
jRadioButton1Sugar.setText("1 sugar");
jRadioButton2Sugar.setText("2 sugars");
sugarButtons.add(this.jRadioButton0Sugar);
sugarButtons.add(this.jRadioButton1Sugar);
sugarButtons.add(this.jRadioButton2Sugar);
public int numberOfSugars()
if (this.jRadioButton1Sugar.isSelected()) return 1;
if (this.jRadioButton2Sugar.isSelected()) return 2;
return 0;
public ButtonGroup getButtonGroup()
return sugarButtons;
public JRadioButton getJRadioButton0Sugar()
return jRadioButton0Sugar;
public JRadioButton getJRadioButton1Sugar()
return jRadioButton1Sugar;
public JRadioButton getJRadioButton2Sugar()
return jRadioButton2Sugar;
public class BeverageButtonsGroup
private JRadioButton jRadioButtonTea = new JRadioButton();
private JRadioButton jRadioButtonCoffee = new JRadioButton();
private ButtonGroup buttonGroup = new ButtonGroup();
public BeverageButtonsGroup()
buttonGroup.add(jRadioButtonTea);
buttonGroup.add(jRadioButtonCoffee);
jRadioButtonTea.setText("Tea");
jRadioButtonCoffee.setText("Coffee");
jRadioButtonCoffee.setSelected(true);
public String getBeverageName()
if (jRadioButtonTea.isSelected()) return "tea";
if (jRadioButtonCoffee.isSelected()) return "coffee";
return "";
public ButtonGroup getBeverageButtonGroup()
return buttonGroup;
public JRadioButton getJRadioButtonTea()
return jRadioButtonTea;
public JRadioButton getJRadioButtonCoffee()
return jRadioButtonCoffee;
public class MilkCheck
private JCheckBox jCheckBoxMilk = new JCheckBox();
public MilkCheck()
this.jCheckBoxMilk.setText("Milk");
public JCheckBox getJCheckBoxMilk()
return jCheckBoxMilk;
public boolean withMilk()
return this.jCheckBoxMilk.isSelected();
public class CoinMechanism
private JButton jButton5P = new JButton();
private JButton jButton10P = new JButton();
private JTextField jTextFieldTotal = new JTextField();
private BeverageFactory b;
public CoinMechanism (BeverageFactory b)
this.b = b;
reset();
jTextFieldTotal.setEditable(false);
jButton5P.setText("Insert 5 pence");
jButton5P.addActionListener(new ActionListener()
public void actionPerformed(ActionEvent e)
jButton5P_actionPerformed(e);
jButton10P.setText("Insert 10 pence");
jButton10P.addActionListener(new ActionListener()
public void actionPerformed(ActionEvent e)
jButton10P_actionPerformed(e);
private void jButton5P_actionPerformed(ActionEvent e)
// to be completed
private void jButton10P_actionPerformed(ActionEvent e)
// to be completed
private void notifyVend()
b.getCoinCurrentTotal(jTextFieldTotal.getText());
public void reset()
this.jTextFieldTotal.setText("0");
public JButton getJButton5P()
return this.jButton5P;
public JButton getJButton10P()
return this.jButton10P;
public JTextField getJTextFieldTotal()
return this.jTextFieldTotal;
public class BeverageFactory
private int coffees;
private int teas;
private int milks;
private int sugars;
public BeverageButtonsGroup beverageButtons = new BeverageButtonsGroup();
public SugarButtonsGroup sugarButtons = new SugarButtonsGroup();
public MilkCheck milkCheck = new MilkCheck();
public CoinMechanism slots = new CoinMechanism(this);
public void setUIState()
// sets the states of the widgets on the frame accoording to the
// quantities of supplies in the machine
// to be finished
public void getCoinCurrentTotal (String o)
// this is should be executed whenever a user puts a coin into the machine
int foo = Integer.parseInt(o);
// to be finished
private int cost()
// returns the cost of the currently selected beverage
// to be finished
public BeverageFactory( int coffees, int teas, int milks, int sugars)
this.coffees = coffees;
this.teas = teas;
this.milks = milks;
this.sugars = sugars;
public void refill(int coffees, int teas, int milks, int sugars)
// to be completed
public Beverage makeBeverage(String name, boolean milk, int sugar)
if (name.compareTo("coffee") == 0)
coffees--;
if (milk) milks--;
sugars = sugars - sugar;
return new Coffee(sugar,milk);
if (name.compareTo("tea") == 0)
teas--;
if (milk) milks--;
sugars = sugars - sugar;
return new Tea(sugar, milk);
return null;
}Okay, well if you read through all that, blimey thanks a lot!.
My question relates to this method in the BeverageFactory class:
public void getCoinCurrentTotal (String o)
// this is should be executed whenever a user puts a coin into the machine
int foo = Integer.parseInt(o);
// to be finished
}I don't understand what the heck its supposed to be for..
I can obtain the current amount of coins inserted from the textbox in the CoinMechanism class. The only thing i could think of, would be for this to enable the 'Vend' button, but it doesnt have access anyway..
Any suggestions would be hugely appreciated, I have tried to contact the lecturer but he isnt around over easter i guess..
Many thanks.I'm not going to read all that, and I don't do GUIs, so this is just a guess, but it looks like the CoinMechanism class is intended to be just a dumb processor to accept coins and determine what each coin's value is, but no to keep a running total.
That in itself is an arguably acceptable design--one class, one job and all that. But I don't know that it makes sense to have the BeverageFactory keep the running total.
Overall, I gotta say, I'm not impressed with your instructor's framework. Maybe it's just because I didn't look at it closely enough, or maybe it's more of a naming problem than a design problem, but it seems to me he's mixing up GUI code with business logic.
Good luck. -
I have a script that reads email in Outlook for Web, generates the folder structure by parsing the subject line, then downloads the file into the folder it just created.C#foreach (Item myItem in findResults.Items) { if (myItem is EmailMessage) { Console.WriteLine((myItem as EmailMessage).Subject); string strSubject = (myItem as EmailMessage).Subject; string[] strDelimiters = { " - ", " - " }; string []strTemp; string []strFolders; string strFileUrl; strTemp = strSubject.Split(strDelimiters, StringSplitOptions.None); strDelimiters[0] = " "; strDelimiters[1] = " "; strFolders = strTemp[1].Split(strDelimiters, 2, StringSplitOptions.None); strFolders[1] = strFolders[1].Replace('', '_'); //strFolderPath = preDownload(strFolders[0], strFolders[1]); // get message body PropertySet psPropset = new PropertySet(); psPropset.RequestedBodyType = ...
This topic first appeared in the Spiceworks CommunityI have a script that reads email in Outlook for Web, generates the folder structure by parsing the subject line, then downloads the file into the folder it just created.C#foreach (Item myItem in findResults.Items) { if (myItem is EmailMessage) { Console.WriteLine((myItem as EmailMessage).Subject); string strSubject = (myItem as EmailMessage).Subject; string[] strDelimiters = { " - ", " - " }; string []strTemp; string []strFolders; string strFileUrl; strTemp = strSubject.Split(strDelimiters, StringSplitOptions.None); strDelimiters[0] = " "; strDelimiters[1] = " "; strFolders = strTemp[1].Split(strDelimiters, 2, StringSplitOptions.None); strFolders[1] = strFolders[1].Replace('', '_'); //strFolderPath = preDownload(strFolders[0], strFolders[1]); // get message body PropertySet psPropset = new PropertySet(); psPropset.RequestedBodyType = ...
This topic first appeared in the Spiceworks Community
Maybe you are looking for
-
Hi Gugus, Is there a way you can change/edit a PO with a follow-on document like GR or Invoice without canceling the the later documents? Any step by step config will be appreciated. thanks!
-
My bb torch has just been nicked.How can the BB be blocked
-
Styles-manual formatting-file size
Situation: exporting from InDesign (CS4 or CS5) to PDF. Does it make any difference in terms of file size, either in InDesign or in the exported PDF, whether text is formatted manually or with styles? Do unused styles bloat the size of either the InD
-
Registerin new DB with existing Listener
One defualt listener is work and few DBs are registerd in it? How i can register new DB to existing listener?
-
PM:Action log for Settlement rule
Dear all, May i know are there any way that i can see the changes that being done at screen maintain settlement rule. For example if I change the settlement type, system will keep the change/action log for that changes. One more question, what the di