P2 Import Problems Solved

Here's what I just figured out this am.
Same problem I'm having on some clips on importing, some clips are visible in the cue, but will not import, use the revert back to meta data on the selected clip that won't import, You will find that in your preferences in the import window.
Wal-la, Your clip will come in.
Don't know if this is a FCP 6 problem or P2 problem. I suspect, it's FCP 6 because I never had any problems with importing before.
Good luck with your projects everyone.
Powerbook/G-5 Desktop Mac OS X (10.4.6)

GREAT tip.
Thanks Don.
Shane

Similar Messages

P2 import problem - solved but still mysterious

I posted yesterday about my P2 files that had imported before but suddenly did not - with that scary "incomplete or corrupt file" message.
I keep a cloned backup of my OS and all software on another drive that can be "cloned" back into my main drive. (great software- Carbon Copy Cloner - downloadable shareware, but leave the kind creator a donation.) It takes time to clone everything but not nearly as long as starting from scratch with disks, numbers and a zillion fixes and updates. Just be very careful to save everything like user files and desktop stuff.
Now, starting again with the pre-problem "cloned" osx and fcp, which are back to 10.4.6 and 5.0.4, the P2 files are importing perfectly again. So clearly the problem was not "incomplete or currupt" files, but some mysterious software glitch that occured in OSX or FCP? If anybody has any thoughts, I would love to dig deeper into this mystery in case it happens again. Meanwhile, if you are told that your P2s are "incomplete or corrupt" and you haven't messed with the locks or txt file at all, don't despair. Wouldn't it be nice to get an error message that said "Whoops - no idea what's goin' wrong honey - but it ain't necessarily your fault"

Hmmm...so the static isn't consistant?
Try looking at the footage with something like the Panasonic P2CMS reader/importer:
https://eww.pavc.panasonic.co.jp/pro-av/sales_o/p2/cms/index.html
Or try HD Log or P2 Log from www.imagineproducts.com. See if Raylight sees this (www.dvfilm.com - demo available).
Shane

Query problem(solved)

hi frs,
i want to display work_location and office_location in a report.which is in table
HR_LOCATIONS_ALL
Which has two location_id
work location : location_id from per_all_assignments_f &
office location: location_id from hr_all_organization_units
how to get both i a have attached the query what i have created but not getting correct values
Thanks
Rajesh
Message was edited by:
Rajesh.mani
Message was edited by:
Rajesh.mani

What Sarma is basically implying is that we do not care if your problem is an urgent one.. as we, the forum, do not get paid to solve problems here. Forum members assist people in their free time. So why should we care if your problem is urgent? You are in no position to demand a quick response from us.
Also, by saying that your problem is urgent, you are also saying that other people who have posted problems here, have less urgent and important problems than you. That you and your problem are special and more important than anyone else in this forum.
Neither of these are acceptable - which is why using the word "urgent" in a posting to a public forum staffed by volunteers, is not acceptable.

Exporting/importing problem

Just tried to import my contact list from my mobile phone(nokia 6230) to my imac which it did, but now when i try to access my contacts in my phone i get the message sim not ready, has ical deleted my contact list from my phone ?
By the way,this minor hiccup aside,i have just had this apple and i wonder why everyone isnt using them , absolutly awesome.
Thanks anyway, Daz.
imac Mac OS X (10.4.8)
Windows XP

Problem solved ,thanks anyway

OWB table import problem

I am a new user in OWB working with OWB 10.1.0.3.
I´m importing a table from our target schema but i only get the table name and not the columns into OWB.
There is no problem when importing from the source schema.
Anyone having a solution ?
Regards
Preben

Laura, did you get this problem solved? I had the same exact situation yesterday and it still is there. How did you get it fixed?
Thanks, Ray
[email protected]

XML Premiere 5.5 to FCP7 Import problem

I am working with an outside editor who did some edits for my company in Premiere 5.5.
They're tryng to supply me with a FCP7 compatible XML file for import into FCP7.
Well I am able to convert the XML file in FCP7, but not all of the info is coming thropugh properly.
The edit is a simple one...
2 camera A/B talking head
1 Main Audio track whihc is done as 4 audio (2 stereo) tracks in Premiere.
The edit supplied to me comes through with the video being fine on 2 tracks.
However, the audio track does not even show up in my timeline. However it's there on his Premiere timeline.
Any idea what might be the problem?
I have supplied pics of both timelines for reference.
One is his Premiere timeline, the other is my FCP7 timeline after XML conversion.
Premiere timeline with 2 videos tracks and 4 audio tracks.
FCP7 timeline with 2 video tracks and only 2 audio tacks sowing up.
Where is the other audio track.

Jeff,
Thanks for your advice, the use of the UT Video Codec Suite has been exceedingly helpful in capturing video. It has made 1080i capture much simpler.
Unfortunately it has not solved my 720p import problems.
I have played around with several different configurations. If I record 720p at 29.97 frames, the whole video imports without difficulty, but the sound is messed up. But when I try to import 720p video at 59.94 frames, Premiere Pro will only import the first couple of minutes of the video if the video is longer than 7 minutes.
If you have any further advice, I would appreciate it.
Kerry

Analytical thinking / problem solving

Hello all. I am interested to find out if you've ever taken a training course in analytical thinking - problem solving. I am very curious if there are courses out there that you found valuable, and more importantly, that you can use with your daily SAP tasks.
Your feedback is very much appreciated.
Best regards,
Aleks

Hello,
I am wondering if this offer is still available?
Best regards

Undocumented problem solved with 16-bit pcmcia and irq error

I am having the exact same problem as described in the following post:
"Undocumented problem solved with 16-bit pcmcia and irq error."
"I'm using a DAQ Card (AI-16E-4), which didn't work properly in MAX. MAX complained that the card didn't respond to an interrupt request.
I've had this issue for a while, but dropped it, since NI support told me nothing could be done about it. Meanwhile, a seemingly unrelated problem with a wireless pcmcia network card arose. Cisco had no clue what was wrong with their card either, but I found Microsoft Knowledge Base Article Q327947. It seems that Win2k (they claim SP3 and up) disables ISA to PCI routing, which is what causes this problem.
To fix it, open regedit
and navigate to "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\Pcmcia\Parameters"
edit or create the DWORD value "DisableIsaToPciRouting" and set the value data to 0.
See Microsoft's article for further details: http://support.microsoft.com/default. aspx?scid=kb;en-us;327947"
The difference is that I am using WinXP and the Regedit fix does not solve the problem. Does anybody know how he was able to continue to use the card before he solved the problem? The card works fine in MAX, but errors out in LabVIEW.

Hey Willy,
Here some additional suggestions that have corrected some PCMCIA difficulties in the past besides the registry edit you suggested.
1. General Troubleshooting to Verify Correct Hardware and Software Installation
Uninstall the PC Card hardware through Device Manager
Remove the PC Card from the laptop
Uninstall the NI-DAQ software
Follow the normal installation instructions (the most important step to remember for Plug-n-Play Operating Systems is to install the software first)
Try the latest service packs for Win 2000 or Win XP
Try the PC Card in a different laptop
Try a different slot in the laptop. On certain laptops PC Cards have been successfully installed in the top PCMCIA slot instead of the bottom.
2. Additional Troubleshootin
g for PC Cards that Return IRQ Conflicts
For E-Series DAQCards:
Update to NI-DAQ 6.9.3 first and then update NI-PAL to version 1.6.1 (included exe file).
Download the attached NI-PAL (ni-cdu1610.exe), and run the installer. When receiving the error "The device is not responding to the first IRQ Level" in Measurement and Automation Explorer, try this method of upgrading NI-PAL
3. Additional Troubleshooting Steps
Try disabling the 3COM adapter, and any other extraneous (for now) devices like any built in serial and parallel ports. The best way to do this is probably to disable them in the BIOS. If the PCMCIA card works properly then try to reconfigure disabled devices one at a time.
Make sure the latest BIOS is installed.
Check for any unusual PCMCIA drivers or other software that might interfere with the PCMCIA driver.
I hope this helps.
Ron
Applications Engineering
National Instruments
Attachments:
ni-cdu1610.exe ‏1557 KB

LR3.2 import problem on computer with Windows OS

LR3.2 import problem on Windows OS
This is a continuation of a question that I posed on August 22, 2010 in the discussion string "Cannot import CR2". I have not been able to resolve the issue of importing an image into an existing folder location. I had not been able to work on this issue for a number of weeks due to other circumstances, until today.   Note that the following people had attempted to provide answers and suggestions already: ssprengel, JayS In CT.
I use a laptop with a Windows operating system and a Macintosh desktop with Snow Leopard. I run Lightroom on both of them. The Windows laptop has Windows Vista Home service pack 2, version 6.0 [6002]. Around August 12th I upgraded from Lightroom 2 [481478], to Lightroom 3 on the laptop. I left the LR2 on the laptop as well as LR3. On September 12th I upgraded the laptop to LR3.2. No other changes have been to the laptop or its software applications that I know of.
My current attempts at resolving the issue reveal that when I created a new catalog "Test Catalog" in LR3 and saved that catalog to my desktop new folder labeled "Test Catalog" that I can import an image into LR3.2 to a new folder on the laptop's desktop. I then deleted the images via LR3.2 Folders Remove function and tried to import the images into an existing folder as presented in the LR3.2 Import dialog, but get the error message "The following files were not imported because they could not be read.".   When I import images into a new folder placed on the desktop, I can use all functions in LR3 e.g. Develop module. I cannot import images into existing folders on the laptop's hard drive - I have tried importing into the entire existing folders in the following hierarchy: c:\users\Michael\My Documents\My Pictures\2010 but always get the same error message.
LR3.2 does correctly backups upon exiting each time I quit the program, so I know that there isn't any issue of writing to that backup folder which is contained in an upper folder that contains the lightroom catalogs. I have even created a new Word file, saved it into the folder with Lightroom catalogs, opened it up, modified it, saved it, and saw that it works OK, so that tells me there is no problem with a Read-Only folder attribute.
I cannot recall if upon the upgrade from LR2.6 to LR3 that I chose to upgrade the catalog to LR3 version. Would that matter, if yes, what do I verify, how do I manual upgrade the catalog.
History of actions between August 10th that I have taken follows between the [[[[ and ]]]]:
[[[[Preference settings for Default Catalog are set to start with a specific catalog that I call "Lightroom master catalog", it is not set to the "Load most recent catalog".
All of the following were using my laptop: Previously I had no problem with LR2 for any functions. I just purchased an Epson 7000 media storage device, and in early August and practiced importing images into LR2, and those images were pulled in OK. Next, I upgraded to LR3. I discovered that the Epson's images had been placed into a wrong folder when I opened LR3. I used the remapping function in LR3 to move the images into the correct folder. Next, I used a SanDisk card reader to import images into LR3 into an existing folder of images, but the following error message appeared "the following files were not imported because they could not be read" (Import Results said 'some import operations were not performed'). I tried importing a single image, and multiple images, but had the same error. I tried switching the card reader to each of 4 different USB port on the laptop, with the same error occurring on each USB port used.
In order to try to isolate the problem. I took the SanDisk card reader with the memory card and successfully imported the images into LR3 on my Macintosh desktop computer; so to me the problem is not the card reader or the memory card. I also used the SanDisk recovery disk while using my laptop to look at the files on the memory card and I could see all the images correctly while in the recovery program, but I have not copied the images to the laptop's hard disk, and have not tried an import into the laptop's LR3. I did not import images directly from my camera to the laptop LR3 since I did not think it would help with the troubleshooting.
I then ran the Repair from the Adobe LR3 CD upgrade disk, on my laptop. Then I tried doing the import using the SanDisk reader and memory card, but the same problem occurred and same error message, that the files could not be imported (I was trying to import into a folder of existing images). I then used the Laptop's Control Panel function to remove LR3 application. Then I did a fresh upgrade of LR3 on my laptop, but the same error message and I am unable to do any import of the memory card from the card reader. I then tried to do an image import from the Epson 7000 into the laptop, and the same error message and I am unable to do any import into a folder with existing images.   I then tried doing an image import into LR2 on the laptop, and got the same problem to occur when trying to import into an existing folder of images. I have a couple of Canon EOS SLR digital cameras, and the issue occurs for any of the file types of the cameras.
Went into LR3 Preferences, General Tab, I now checked the previously unchecked box for Import Options - "Show import dialog when a memory card is detected".
Connected the Canon XTi directly with a cable to the laptop computer. Note that Canon's information said that Picture Transfer Protocol is automatically used when the XTi is directly connected to a computer, so I did not need to change anything in the camera's menu for communications choices (there is no communication menu in fact). I selected one image and copied it to the laptop desktop. Tried to import it into LR3 into a folder of existing images but got the error message "Could not copy a file to the requested location." While in LR3, I changed the location of where the file would be copied into - any of my existing folders of images; tried 5 different folders, but kept getting the same error message.
With the card reader connected via USB port on the laptop, I copied one image file to the desktop, and then tried importing into LR3 into a folder of existing images. Got the error message "Could not copy a file to the requested location."]]]]

I am not clear if by 'import' you are trying to copy or move the files from a location to another or if you are adding the files to a catalog. My comments may not, therefore, be too helpful.
Firstly, with both LR2 and LR3 installed you will have both catalogs present, but if you try to open the LR2 catalog with LR3 you will be prompted to update the catalog. You will thus know which catalog you are working on.
Secondly, if you are reading direct from the camera, you should connect using the 'PC connection' mode.
Thirdly, there is an issue with reading .CR2 files directly from the early Canon DSLRs (in Europe named 300D, 350D, 400D). While they are visible with the Canon software, they can not be seen with Windows explorer nor can they be accessed with Lightroom.
I suggest that you take the CF card out of the camera and copy the files using Windows Explorer in to the destination folder. You are then sure that the files are on the PC.
If you have the right Codec installed, you can view them with Windows photo gallery; if you don't, you can use one of the Canon software packages to view the files. You are then sure that the files are not corrupted.
Then import the files to your LR catalog using the normal import routine selecting 'add without moving'. I have tried this routine successfully using my 350D using both LR1.x and LR3.x. If that doesn't work - I'm lost.
Frank

On windows 8 and itunes I have importing problems the DVD is only reading the music cd from 1.5x to 4.0x for 95% of the time, it does hit speeds of 30x for the other 5% of the time. Is it a driver issue with the DVD or is it a windows 8 issue?

on windows 8 and itunes I have importing problems the DVD is only reading the music cd from 1.5x to 4.0x for 95% of the time, it does hit speeds of 30x for the other 5% of the time. Is it a driver issue with the DVD or is it a windows 8 issue?

No. You have no alternative but to plug it into a computer running iTunes and restore it.

Aperture Video Import Problem - from Lumix GH4: Imported clips have their dates changed to the import date. The files show up on the hard drive but many are not showing up in Aperture.

Aperture Video Import Problem - from Lumix GH4: Imported clips have their dates changed to the import date. The files show up on the hard drive with import date not created date, but many of these same files are not showing up in Aperture. Sometimes the clips actually show up with the current import but take on the video information from a previously imported file.

It was suggested I move this question to IPhoto or IMovie which I did.
Well moving to a different discussion group did not provide an answer to this question either. But what I finally did was import one batch of photos and videos into IPhoto for a given day at a time. Working with these I could change the date and times in order to get them in the original sequench taken. Then I would create an album with that batch. These would all be on the same day (IMove was closed for this phase). Then I would open IMovie, generate the thumbnails for that album, and select the album I had created. This was necessary because the importing process in IPhoto was using incorrect dates for my video so it was a real struggle finding them in IMove until I developed this approach.
I believe that this whole process was so screwy because I was importing from an external hard drive not a camera. I had these photos on a PC and did not have the original cameras to use to import directly which I am fairly sure would have made this easier!

Final Cut Pro/GY-HD111E import problems?

Final Cut Pro/GY-HD111E import problems?
With a brand new Mac Pro and very latest Final Cut Studio complete with updates I'm having a little problem trying to import footage directly from a JVC GY-HD111E (yes I'm in PAL land, UK) via FireWire into FCP.
Footage is 720p/25p and timeline is set up in FCP that way.
I'm doing a 'capture now'. The first clip I'm trying to import is about 45 minutes long with no cuts/breaks whatsoever.
What happens is after about 60 seconds or so, it FCP automatically breaks the clip for no reason and starts a new one, trouble is, when it does this I lose about 4 seconds of footage at that point.
It continues to break clips randomly, sometimes after 40 seconds or so, sometimes after 95 seconds, but usually between 30 seconds and 2 minutes and each time it starts a new clip I lose between 1 and 6 seconds.
As I say, there are zero breaks or cuts in this clip, I have a 45 minute clip that was shot in one take, not even a pause anywhere.
Is this a JVC issue or a Final Cut issue?
It's a pain as it simply means I can't import my 9 hours of footage hence I can't get on with this project.
Any ideas why this phenomenon is happening?
Thanks guys.

I mean I get the same errors.
Let me explain again.
There are NO start/stop/pauses in this clip.
I'm trying to import just ONE clip with no breaks, again, there are NO start/stop/pause, it is one continuous clip of 15 minutes duration.
The JVC creates some sort of errors at the Firewire output stage, it drops frames or other errors, FCP gets confused and creates a new clip, even though it is the same clip, but due to the GoP structure, it looses a few seconds too hence I can't import the footage as I keep loosing bits here and there mid clip. It is randam, every 30 to 100 seconds or so it will do this.

I can not write in Hebrew And create effects It shows all distorted When This problem solved?

I can not write in Hebrew
And create effects
It shows all distorted
When This problem solved?

roeisarusi wrote:
When This problem solved?
Nobody knows. iWorks apps have always had bugs that make them unsuitable for Hebrew/Arabic for most people. Tell Apple here:
http://www.apple.com/feedback/keynote.html

How to problem solve adf issue in the mx340 model

how to problem solve adf issue in the mx340 model

Alex,
the missing thing in your example is the fact, that if only one value is selected, the parameter has exact this value like BOSTON. If you choose more than one value, the parameter includes the *'*, so that it looks like *'BOSTON','NEW YORK'*. So you need to check in the package, if there's a *,* in the parameter or not. If yes there's more than one value, if not it's only one value or it's null.
So change your package to (you need to expand your variables)
create or replace package bip_departments_2_parameters
as
p_dep_2_param varchar2(1000);
p_loc_1_param varchar2(1000);
p_where_clause varchar2(1000);
function beforereporttrigger
return boolean;
end bip_departments_2_parameters;
create or replace package body bip_departments_2_parameters
as
function beforereporttrigger
return boolean
is
l_return boolean := true;
begin
p_where_clause := ' ';
if p_dep_2_param is not null then
if instr(p_dep_2_param,',')>0 then
p_where_clause := 'WHERE DNAME in ('||p_dep_2_param||')';
else
p_where_clause := 'WHERE DNAME = '''||p_dep_2_param||'''';
end if;
if p_loc_1_param is not null then
if instr(p_loc_1_param,',')>0 then
p_where_clause := p_where_clause || ' AND LOC IN ('||p_loc_1_param||')';
else
p_where_clause := p_where_clause || ' AND LOC = '''||p_loc_1_param||'''';
end if;
end if;
else
if p_loc_1_param is not null then
if instr(p_loc_1_param,',')>0 then
p_where_clause := p_where_clause || 'WHERE LOC in ('||p_loc_1_param||')';
else
p_where_clause := p_where_clause || 'WHERE LOC = '''||p_loc_1_param||'''';
end if;
end if;
end if;
return (l_return);
end beforereporttrigger;
end bip_departments_2_parameters;
I've written a similar example at http://www.oracle.com/global/de/community/bip/tipps/Dynamische_Queries/index.html ... but it's in german.
Regards
Rainer

WiFi connection problem solved

My intel iMac and MBA had no problem but iPods 3g and 5g did. I had an old Netgear router connected and sitting next to my Airport Express. On a hunch I diconnected the Netgear and created a guest network to replace the one on the Netgear. PROBLEM SOLVED!
Evidently our iPods and boarder's iPhone had problems sorting out the signals and finding the right addresses. Moving the AE to a higher and slightly more central position also helped.
Jim

Same here on a Vodafone PocketWiFi 2.
Tried NetworkManager, wicd, wifi-menu but all have the same issue.
I recently installed Aptosid on another machine and it has the same problem... It also has kernel version 3.9.
All the live CDs I've tried work, even an Arch CD from May works, though a current install does not.
I have no problems connecting to another (wpa2 enterprise) network yet can't on this 3G modem.
I'm hoping this isn't a permanent issue and perhaps an update very soon will fix this.
It seems the only way to fix this for now is to use an old version of Linux. I'm currently running a virtual machine only for the purpose of Internet sharing, very annoying.

P2 Import Problems Solved

Similar Messages

Maybe you are looking for