P2015 Ready Light flashes 4.5 minutes

I wrote a file printing program using CodeGear (previously Borland) Delphi that prints Delphi source code files on both sides of half sheets (5.5 x 8.5 ); I manually refeed the pages for printing on the reverse. The program bypasses the Windows printer canvas by using Windows API printer functions to send PCL 5 escape-sequences directly to a HP P2015dn printer connected to the USB port using the PCL 5e driver (The same results are obtained using the PCL 6 driver). The program changes the font to 16.67 char/in, changes the lines/in, changes the margins, and repositions the cursor several times.
The program performs exactly as planned but after the last page is printed, the printer reset command is sent, and the printer is closed, the printer's Ready Light will continuously flash for 4 minutes and 40 seconds then turn steady-on as is normal. But even while the Ready Light is flashing (implying that the printer is receiving data), the above program can be run again and it will immediately print whatever file is requested.
Does anyone have any idea why the Ready Light flashes for 4 minutes and 40 seconds after the print-job is complete?

http://supportforums.blackberry.com/rim/board/message?board.id=8100&message.id=13769#M13769
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

T510 - Mute, Mic, and light flash for 30 minutes before computer turns on

I have a 3 day old T510 that takes 30 minutes to turn on. When I press the power button, the MUTE button, MIC MUTE button, and the keyboard light above the LCD start blinking... 30 minutes later, the computer turns on. This is only the first power on in the morning. I disconnect power, remove battery.. same results.
Any ideas?

I would speculate that the power adapter and perhaps the battery are suspect. A MBP should operate with just the power adapter connected. If available, try another charger. Once you can get the MBP operating you can investigate the status of the battery by opening System Information>Power.
An appointment at an Apple store genius bar may be a good option. The evaluation will be FREE.
Ciao.

LaserWriter Pro 630 : flashing 'Ready' light?

Howdy, all!
My LaserWriter Pro 630 just started 'acting up' recently and I was wondering if anyone has seen these symptoms before...
The 630 is attached to my home network--there haven't been any changes to the network in the past 8-12 months.
I can send a document to the printer from my PowerBook G4 (which is connected to the network through an Airport Base Station).
The printer 'fires up,' as if it's getting ready to do some printing. Then, it spits out a blank sheet of paper--completely blank.
The 'Ready' light continues flashing, even though the print queue is empty.
I have pushed the Service Test Page Button, and the 630 successfully printed the page o' lines.
I took the printer this afternoon to a laser printer guy, and he replaced the Laser/Scanner Assembly. Unfortunately, it hasn't remedied the situation.
I've also got a brand new toner cartridge in the printer. I initially thought that the printer was simply out of toner, but I guess I was wrong.
Anyone have any clues, hints, or words of encouragement?
Thanks in advance,
mg

HMMM - tried it with the Appletalk connection - or even the parallel port on a PC?
Tried your Mac with another printer (even a USB printer) - Could show some problem
Can any other computer hit the printer?
Just some thngs to check out -- hope this helps

Apple TV loses picture output and status light flashes rapidly after 5 minutes hooked up via HDMI - DVI cable

Apple TV connected to a 2005 50" plasma monitor with DVI input via belekin HDMI to DVI cable. Unit worked perfectly long enough to get it connected to the wireless network and begin the itunes registration process when there was a loss of signal message on the screen from the monitor and the Apple TV status light flashed rapidly and continuously. Reset and reboot yeilded flashing rapid status light and no output detected from the monitor. I contacted support online and was told to return the unit to the apple store. I returned home with another brand new apple tv and connected it in the same manner with exactly the same results. Is there something with the HDMI - DVI interface that is causing this? Are there known issues with the HDMI - DVI connection to Apple TV with older plasma monitors?

The Apple TV doesn't actually support DVI. Some have managed to get it to work others have had varying issues with it.

TS3623 I recently purchased a season pass for a TV show on my aple tv I downloaded th first episode and when I went to watch it it started to download again and is now frozen at "ready to watch in 44 minutes"?????

I recently purchased a season pass for a TV show on my apple tv I downloaded the first episode and when I went to watch it it started to download again and is now frozen at "ready to watch in 44 minutes"????? I have had it do the reloading process on an entire season of another show (very frustrating) but have never had it freeze up like this? any help out there?

There is no accessible storage so that is why it needs to reload. The time it take is dependent on your network. Not sure why it is freezing this time but you may want to try a reboot (hold the menu and down arrow for a few seconds until the light starts flashing and then release)

When I connect Time Capsule to Time Warner Cable Modem, amber light flashes

I want to use Time Capsule as my primary wireless network base. When I connect my Time Capsule directly to my Time Warner Cable Modem, the amber light flashes and Time Capsule won't appear in AirPort Utility on my MacBookPro. I've tried unplugging everything and waiting to reset cable modem and Time Capsule.
Before I got the Time Capsule, I used a wireless router. The only way I can get Time Capsule to work is as a guest on my old wireless router network. I can't get the Time Capsule to configure itself directly with my Time Warner Cable Modem.
Any advice would be most appreciated.

This situation is pretty common now and it has nothing to do with the any of the routers but rather how cable modems are configured to work. They seem to latch on to the first device connected to them whether it be a router or a computer and will not allow any other device to access their network. The solution is to power off the cable modem and wait a minute. While you're waiting disconnect the old connection from the cable modem. Power up the cable modem and then connect the new device, router or computer, to the cable modem. Give it a few seconds to complete the connection and you should be ready to go. You have to do this every time you switch connections to the cable modem. This is also why you should set your router to serve addresses so that you don't have to do the cable modem samba when you want to connect a new device to the network.

TS1410 My older iPod is not recognized by iTunes. A yellow light flashes.

My older iPod is not recognized by iTunes. When plugged in a yellow light flashes. When unplugged and turned on, I see green and yellow lights flashing alternately. Help?

The Jaguar there is nothing you can do, and the new interface from the dealer are not compatible
For the BMW, you have to find out what brand interface was installed in the vehicle
can be dension or original BMW in the x5, if dension you can get something call
Scosche passPORT if BMW brand you can get a new cable from Bmw with the usb and dual power supply,
In the Mini if DIce brand you will need a new cable or new iPod interface, now they have a usb plug to do updates in case iPhone 5 is release in the future or any other updates from iTunes
http://www.oemautosound.com/pc-457-164-dice-i-bmw-t5v-mini-cooper-2002-2008-to-i pod-text-ready.aspx

Sleep light flashes 5 times - no beeps. What does it mean?

I have a white 2008 Macbook 2.4 Ghz. I recently installed 10.6 from scratch via Retail DVD and the Macbook worked fine. I updated via Software Update and installed all the updates that appeared. There was also a Firmware update to install, which I did after the update to 10.6.8.
But since then, the Macbook has serious video problems.
It boots okay, but the sequence is now:
- front sleep light flashes 5 times; there are no error beeps
- I hear the startup chime
- the Apple logo and spinning wheel appear, and bootup continues
- at the point where the screen goes blue, and would normally boot to the desktop, the screen now goes black and the Macbook appears to go to sleep
If I wait for a couple of minutes, when I press a key to wake the Macbook from sleep: the DVD spins up, the sleep light flashes 5 times, and I now see the desktop. But then the screen goes black after about 10 seconds.
Before the screen goes black, I can see that the boot seems to have completed okay. I have a Wifi connection and the date and time are correct.
If I go really fast, I can move the arrow to the Apple icon in the top bar and choose Shut down or Restart.
I can boot from the internal HD, an external FW HD and an Install DVD.
I can hold down the Option key and I get all the bootable volumes to boot from. I can choose any of them, then start the boot process, but at the same point - the blue screen - the screen goes black and the Macbook goes to sleep.
The Macbook works perfectly fine when connected to an external monitor. In the Display preferences, only the external monitor is available. The Macbook monitor is not listed. As well, iSight and Photo Booth report that no camera is connected.
I've found some info on the Apple site re. the 5 sleep light flashes, but it only refers to the Macbook Air, and indicates a problem with the battery.
Has anyone seen this problem with the Macbook?

From EZ Jim's link, there was another link to this info at the Apple site, re. Power on Self-Tests:
The power on self-test resides in the ROM of the computer. This test runs whenever the computer is turned on after being fully shut down (the power-on self-test does not run if the computer is only restarted).
If a fault is detected during the test, you will not hear a normal startup chime. Instead, the system will beep as explained below. If you experience one of these beeps, you may call your Apple Authorized Service Provider for additional troubleshooting assistance.
1 beep = no RAM installed
2 beeps = incompatible RAM types
3 beeps = no good banks
4 beeps = no good boot images in the boot ROM (and/or bad sys config block)
5 beeps = processor is not usable
In addition to the beeps, on some computers the power LED will flash a corresponding number of times plus one. The LED will repeat the sequence after approximately a 5-second pause. The tones are only played once.
As I wrote, I don't get the Error Beeps. I've had these on other Macs, so I know what they are. Here, I only get the LED flashes.
What is interesting above is that they say that the Power LED will flash a corresponding number of times (as the beeps) PLUS ONE. In my case, then, if I got 5 flashes, then might it mean NO GOOD BOOT IMAGES IN THE BOOT ROM?
Anyway, it doesn't seem to have the flashing LED problem any more. No idea where to go from here.

Q10 has locked me out completely. Won't turn on but red light flashing to specific pattern

Help! Turned my Q10 off yesterday to reset as emails not getting through. Now won't turn back on - just a little red light flashing at top right of device in a specific pattern. Nightmare-any ideas??

Connect your Q10 to the known working OEM wall outlet charger.
After being connected several minutes, LEAVE it connected and remove the battery a minute, and reinsert... does it reboot?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Macbook air camera light flashing on resume?

Hi guys, my Macbook air (11 inch, mid 2011) has recently had its facetime camera light flashing on resume when I open the macbook lid. The time period when it flashed varies, but I am worried about security, and if someone has access to the camera.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve your problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to gather information about the state of your computer. That information goes nowhere unless you choose to share it on this page. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them.
Here's a summary of what you need to do, if you choose to proceed: Copy a line of text from this web page into the window of another application. Wait for the script to run. It usually takes a couple of minutes. Then paste the results, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in your browser, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; Pc () { o=`grep -v '^ *#' "$2"`; Pm "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id | grep -qw '80(admin)'; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed '8!d;s/^ *//'; o=`SP Hardware | awk '/Mem/{print $2}'`; o=$((o<4?o:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d; /[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]||0[^2]8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/{s/^.*://p;}' <<< "$p"`; Ps "Battery condition"; for b in Thunderbolt USB; do o=`SP $b | sed -En '1d; /:$/{s/ *:$//;x;s/\n//p;}; /^ *V.* [0N].* /{s/ 0x.... //;s/[()]//g;s/$.*: $$.*$/ $\2$/;H;}; /Apple|SCSM/{s/.//g;h;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; d=(/ ""); D=(System User); E=; for i in 0 1; do o=`cd ${d[$i]}L*/L*/Dia* || continue; ls | while read f; do [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && e=" *" || e=; awk -F_ '!/ag$/{$NF=a[split($NF,a,".")]; print $0 "'"$e"'"}' <<< "$f"; done | tail`; Pm "${D[$i]} diagnostics"; done; [[ "$o" =~ \*$ ]] && printf $'\n* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|last value [1-9]|n Cause: -|NVDA\(|pagin|SATA W|ssert|timed? ?o' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); o=${s[2]}%; Ps "CPU usage by process \"$s\" with UID ${s[1]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); s[2]=${s[2]%[+-]}; o=$((s[2]>=25000?s[2]:0)); Ps "Mach ports used by process \"$s\" with UID ${s[1]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | awk 'NR>1 && !/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'`; Pm "Extrinsic system jobs"; o=`launchctl list | awk 'NR>1 && !/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | grep -v com\.apple\.CSConfig | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/Star*; do M; done`; Pm "Startup items"; o=`find -L /S*/L*/E* {/,}L*/{A*d,Compon,Ex,In,Keyb,Mail/B,P*P,Qu*T,Scripti,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB\ :CFBundleIdentifier "$d/Info.plist") || ID="No bundle ID"; [[ "$ID" =~ ^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|\.hpio|JMicron|microsoft\.MDI|print|SoftRAID ]] || printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find -L /u*/{,*/}lib -type f | while read f; do file -b "$f" | grep -qw shared && ! codesign -v "$f" && echo $f; done`; Pm "Unsigned shared libraries"; o=`for e in DYLD_INSERT_LIBRARIES DYLD_LIBRARY_PATH; do launchctl getenv $e; done`; Pm "Environment"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; Ps "DNS"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; Pc "hosts" <(grep -v 'host *$' /etc/hosts); Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l | sed 's:/Users/[^/]*/:/Users/USER/:g'); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l`; Ps "Restricted user files"; cd; o=`SP Fonts | egrep "Valid: N|Duplicate: Y" | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know your password, or if you prefer not to enter it, just press return three times at the password prompt.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line "[Process completed]" to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report your results. No harm will be done.
8. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of Apple Support Communities ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

My Macbook pro, (late 2010) sometimes will sleep and won't wake up. then the sleep light flashes.What's the problem?

My Macbook pro, (late 2010) sometimes will sleep and won't wake up. then the sleep light flashes.What's the problem

Hi I've been following this thread (along with a different one on the same topic). I've been having the same problem with my ibook. I can add that I have no problem with startup. It's just that the screen "goes to sleep" unexpectedly and may operate normally for a few minutes or a few hours at most. Opening and closing the lid or restarting seems to cause it to awaken but then usually for just a few seconds or minutes. If it is connected to another video display that display continues functioning fine even though the computer screen is blank. In addition the desktop is there and visible faintly or if totally blank can be backlit through the apple logo and can be read. I've had my logic board replaced twice under the extended warranty and assumed it was that but now I'm thinking of the reed switch. Apple refuses to consider any further work under warranty as the last repair was in Jan, 06 and they claim only a 90 parts warranty and the machine is from 03. Any thoughts before I cut the wires? I have reset the pmu, run cocktail and disk utility. Other than the sleep issue the machine works fine. thanks Ronda or anyone else who has any ideas... Dave

Mac Pro, Lion: front light flashing, fans blowing, and doesn't startup...

This has never happened before: my Mac Pro's (Lion) front light flashing, fans blowing, and doesn't startup...
Any workaround? Help, please...

If there is no response to keyboard or powerbutton presses; hold power button until it shuts off. Unplug and wait 5 minutes and then plug back in and try to start again.
Post back with results.

Intermittent connection dsl light flashing on mode...

I had a line issue fixed last week after a voice/data outage, after this my infinity connection worked for a few days, then I noticed the dsl light flashing on the hub every few hours. This has progressed to pretty much no connection, if I reboot the fiber modem ocasionally I will get a connection for 20 minutes then it will fail again. I've tried a spare fiber modem which worked for about 5 hours then started displaying the same symptom of the dsl light flashing. The voice part of the line is working fine with no crackling or drops. The line checker said everything was fine when I first tested it so is this likely to be another wiring issue, a problem with the hub/modem (I understand they can have thermal problems?) or something external?
Any thoughts or things to try appreciated before I brave another call to the helpdesk....

Two modems with the same issue, this there must be a BroadBand fault.

3 status lights flash rapidly only after unplugging it stop

Whenever I use Airport setup assistant to make changes to my existing setting, and when the base station should be restarted it stops sending a signal and then all three status lights flash rapidly and also simultaneously. This is a replacement base station as the previous had its wan port fried. When it was first plugged in it gave this same problem. Only after plugging out the power chord and waiting for say 1 minute, then plugging it back in did the flashing stop and the base station started sending a signal again. This also occurred during the first set up using airport admin utility. It hasnt happened since (when using admin utility)but continues to happen when I use airport setup assistant. Is it sumthing I should be worried about?

Sounds like your Airport Base Station is operating just fine - I wouldn't worry about it.

Noise margin and orange light flashing on hh5

Hi, I've had infinity 2 installed by an engineer a week ago and since then I have seen the hub disconnect lots of times and the orange power light flashes from anywhere between a minute and and hour with no internet access.
I have checked the stats and I've got a noise margin of 6.1/6.6!! Could this be the reason why I cannot get a stable connection? What can be done about it?? Confused!!!!

Hi Dantheman22,
Please use the 'contact the mods' link in my forum profile under the 'about me' section to send in your details and we'll sort out an engineer visit for you. You can find the link by clicking on my username.
Thanks
Neil
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

P2015 Ready Light flashes 4.5 minutes

Similar Messages

Maybe you are looking for