P2035n not connecting to network, it show on it, but try to connected and it fail
p2035n not connecting to network, it show on it, but try to connected and it fail. it was working for a day then cant connect to it no, even after reinstalled. it looks like the printer is shut out.
I had the same problem with my iphone 4S. I paired it to a Bluetooth device (Bose Sound speaker) and accidently "forgot" the device. After that I couldn´t pair it again, not could I connect it to my Time Capsule, it said the password was incorrect. However, both devices worked perfectly with another iphone and my mac. I tried resetting network settings, the phone, the wifi connection, but nothing worked. Eventually I ended up restoring my iphone, backed it up to the latest backup, and BINGO! everything works!!! Good luck!!!
Similar Messages
-
My iphone 4S only start whit cable plug in and then show battery very low (with red line end) then try to turn on but show searching in operator name command and not connecting and no work properly and when I plug out it turn off!!! what should I do?
I'm afraid you'll have to get the phone serviced, dropping the phone must have damaged additional parts inside the phone.
But Apple will not service the phone anymore, opening the phone and replacing the battery should only be done by authorized personal, not by users.
You'll have to look for a 3rd party repair shop and see if they can fix this, sorry. -
I have itune 10.5 with windows 7, when i click itune store it is not connected and show blank page.
You can't, Anh. That's what people are telling you. At this time there's no way to get out of recovery mode. You're playing around with beta software and this is what you get.
Tell your "developer friend" he needs to talk to other developers to see if this can be fixed, or have him replace your devices that you should never have let him play with to begin with. -
I don't know much about computers, so please be patient. I started using Airport and I recently noticed a "network" option right below "Macintosh HD". When I click on "network" it shows "b67446000000" with a computer monitor icon and "connection failed". When I right click on this and select "Get more info" it displays nothing, just the spinning wheel. When I select "Connect As" it asked for my password to connect to "Server b67446000000". This may have been on my computer since I got it, I never paid much attention. Is this part of the operating system or has someone hijacked my computer? Why would I need a server...it's just me and my one computer? Maybe someone has hacked in through Airport? Any help will be greatly appreciated. Thanks!
Is your airport a Time Capsule.. if so it is able to serve files on the network.
The number is the MAC address of the network in the router.
Please reset the apple router whatever is and redo the setup.. this time give it a simple name.. eg TCgenX where X is the actual gen of the unit and give it a simple wireless name.. TCwifi and a simple password with 8-20 characters mix of upper and lower case and numbers.
Perhaps even better give me a screenshot from the computer of the airport utility showing me the Airport with its MAC address. -
Canon ir 2420 ufrii LT network printer show only processing but print not receive
My Canon ir 2420 ufrii LT network printer show only processing but print not receive,i have check its ip and network all is fine i also relode this software but result is same , show only processing print not recieve ,please if you have any trick please share , Thaks for you support
I can't find that printer on the canon eu support website (canon uses model numbers on that site, not series designations) , and canon printers are not easy to get to work well on archlinux.
However there are 2 aur packages that provide the UFRII driver :
- cndrvcups-lb (built from source)
- cndrvcups-lb-bin (uses the binaries) -
I have apple iPhone 4S upgraded to iOS 6.0.1 and everything was working fine suddenly my Wifi was not connecting and found the wifi on/off button is greyed out and to enable it I tried all resets but still my problem have not solved, still wifi is off
Same here.... No fix. Replacing is the option apparently and if you're out of warranty, you're SOL. That was as per the "Genius" at Apple.
-
I have a new iPod and cannot get my music loaded on to it. The computer says it's not connected, and then it says it is synced but there's still no mucis on it.
If that's not a real email, you need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
(99730) -
Why does 'User not registered for online use' show up when I try to import a cd into itunes? None of the cd info shows up either.
Well, the format I upload from the camera is "video clip" or "video for Windows"...sometimes I've converted them to avi format, too. But as I said, it never even lets me get that far...I never get to even select a clip. As soon as I tell the program to "import/clip" it freezes up before I can even go to the folder that the clips are in. It has only begun to do this recently, and I'd never had any problems like this before. Last night I tried it again, and I clicked "open composition", and it froze when I did that too.
I'm not sure how much more specific I can be about the details of the clips, since I'm positive it has nothing to do with the clips themselves...I'm running Windows XP, though...Home Edition Service Pack 2, Pentium 4 CPU 2.80GHz, with 504 MB of RAM. I have had the automatic updates turned on since I did my last reformat a couple of weeks ago. Could it have something to do with some kind of an update it may have done? -
I'm trying to connect my iPad to my Samsung galaxy s by bluetooth but the ipad will pair with it but not connect and says "its not supported" does anyone know what this means and how I get it to work?
iOS devices do not have the BT profiles that support file sharing and othr general functions. See:
iOS: Supported Bluetooth profiles
Basically it support headphones, keyboards, speakers, peer-to-peer gaming -
On my PC when I atempt to go the Itunes store it will not connect and gives me the error message (-3221). any ideas?
Try this discussion...
https://discussions.apple.com/message/2229242#2229242
From the More Like This on the right. -
Hi! I brought an iPhone 4 off my friend at work. The day I brought it, it was working fine but now I can't seem to send any messages or make phone calls. The network is showing up fine but each time I try to make a call it says "call failed" I can't seem to send any messages either? I can use the Internet fine and everything else on the phone. Can anyone help?
Hi chelsinator,
You can reset the phone and it won't cause any problems or cause you to lose any data - Hold down the Home and Power buttons at the same time and continue to hold them down until the Silver Apple appears.
The other thing you should do is to reset your network settings: Settings>General>Reset>Reset Network Settings. You will have to set up your Wifi again, but that oftentimes clears things up.
Cheers,
GB -
I am connected to time capsule via wi-fi but air port says not connected and disk utility does not see it. I had it connected via ethernet and it still did not see it. Then i disconncectd it from ethernet and did the Wi-fi connection and am able to post this message but air port still does not see it.
Disk Utility will not "see" the Time Capsule, so no need to waste any more time on that issue.
but air port still does not see it.
Not sure what you mean by "air port" here. -
Anyone else have a problem printing from an iMac OS-X 10.9.3 to a wireless Epson 835 Artisan printer? Sometimes it prints but must often I get "The printer is not connected" and I have to retry printing 8, 10 or 12 times before it will print? I have followed all the instructions from Epson about upgrading, etc. but it is very frustrating when I have to repeatedly try to print. Epson says talk to Apple???
Try checking thru these, maybe some help.
Mac OS X: How to reset the printing system
http://www.macworld.com/article/2029528/mac-troubleshooting-what-to-do-when-you- cant-print.html
Also try deleting the printer from your printer Q system preferences, then reinstalling it (highlight the printer click the minus symbol, then click the plus symbol and add it again. Reboot, and try. -
My email on att does not connect and if it does it takes forever
MMy email does not connect and if it does it takes forever. What is my oriblem
You have to provide email to access app store,dont expect walk in and walk out
-
My FaceTime will make the call but will not connect and will sometimes say call failed. What do i do?
don't update to iOS7 just yet if you prefer 6. Many are saying that's the cure, but there are lots of iOS7 users here who can't make Facetime work either.
It would seem Apple has either a big problem on their hands, as this is now a week old, or they don't know how to fix it. Either way, email Apple tech support your concerns
Maybe you are looking for
-
PDF portfolio in browser display issues
PDF Portfolio created in Acro Pro 9 with layout of grid/preview PCs using IE 8 to view portfolio in web broswer When one loads the portfolio, the portfolio loads in IE8 Ok BUT it does not display as intended as the browser add-in always starts in 'la
-
Need to know the sqluery to find the disabled date from OIM 9.1.0.1
Hi Experts, Need very urgent inputs from you all for the preparation of our audit. We are using OIM9.1.0.1 We need to know the sqlquery for finding the Disabled date in OIM given the user ids, as currently we are unable to get the exact data from His
-
I have an early 2008 MacBook Pro with a DVI output. I am looking for an adapter that would allow me to connect my laptop to a projector that only has a yellow, red, white RCA input. I have tried searching for a DVI to RCA adapter but have not had any
-
Missing compile-abc.exe to test "-useLegacyAOT no" with Air SDK 4.0 beta?
i get the following error: SDK is missing file C:\Program Files (x86)\FlashDevelop\Tools\air40beta\lib\aot/bin/compile-abc/compile-abc.exe here's my command line: adt -package -target ipa-ad-hoc -useLegacyAOT no -storetype pkcs12 -keystore "cert\iph
-
Sequence Code in Incoming payment
Hi Experts, Is it possible that we can can show the sequence code in Incoming payment window and How ?. Please can any one share their experience regarding the sequence code in Incoming payment window. How we can accomplish this particular task in SA