P2055dn Locked in Duplex Mode

I have a LaserJet P2055dn printer with the duplexing unit installed. I have it connected to my router and have two computers attached to the router; one with the Win 7 OS and one with Vista.
I can print from both machines directly to the network printer, but only in Duplex Mode. No setting on either computer will allow me to print on only one side of the page.
I've uninstalled and reinstalled the software (downloaded from the HP site) several times, but that doesn't seem to make a difference; still no one sided printing.
The message boards indicate two other situations where this has occurred, but no answers were provided to either thread.
Can anyone help on this one?

I called HP Technical Support and paid for the one year warranty extension as the printer was out of warranty. It cost me $37.65. She took control of my machine, dumped the driver, uninstalled all the HP software relating to the printer, and then downloaded and installed the software and driver. It worked after she was done.
Uninstalling the software as well as the driver seemed to be the step I hadn't done.
I don't know if the software she downloaded and installed was the same software and driver that is available online. I know it wasn't the same as the software and driver that was on the DVD that came with the printer.
It was the best $38 I've spent in a long time!

Similar Messages

Printing multiple copies of 3 page BOL in Duplex mode-

Hi Gurus!
I have created a smartform to print the BOL on front side and terms and conditions on back side. I used the duplex mode to print and it works perfectly fine. When I have a BOL with 3 pages of information , it prints the items on the front side and terms and conditions on the second side and it does everything absolutely correctly.
At our organization we always print 5 copies of any BOL and that is when the problem arises. When we do a printing of the BOL form with number of copies set to 5 , it prints very akwardly with the settings. First it prints page 1 front and same thing on the back, then again the first page on the first and its back and then front on the third side , then similarly 5 sides of terms and conditions and then followed by 5 sides of page 2 items and followed by 5 sides of terms and conditions, which is very akward. Actually it should print first set with page 1 and TC on back of it , then Page 2 and TC on its back and page 3 and TC on its side like it does when I make a single copy.
Is there any settings that I am missing thats making the above happen when I print multiple copies of the BOL?
Please suggest.

Hi!
Thanks for the reply. I changed the settings of the printer to 'Pass Copies as Separate Output Request(in SAP System)' and re-tried printing 5 copies of the BOL and it again seems to print the first page 5 sides then Terms and conditions on 5 sides, then again 5 sides of page 2 and followed by 5 sides of T&C.
My settings on the smartforms is front page "D' and the back and the Last page is blank setting. This runs well when I just have to print one copy of my BOL , it prints the front page and then T&C on its back side , then again the second page and T&C on its back . This only messes when its more than one copy of the set of BOL.
Please suggest as to what to do next to make it print in proper sets.
Thanks and Regards
Aarav

SmartForm Last Page to be printed in Duplex mode

I have a requirement in PO printout where the Last page containing the Terms and Condition to be printed on Duplex mode.
Suppose the PO is taking 4 pages without Terms and condition. then the TC must be printed on the backside of the 4th page.
My smartform contains 3 Pages 'First', 'Next' and 'TC'.
If i set page 'Next' duplex then the 3rd page is getting printed on the back side of the 2nd page.
So how can i Print the TC page on the backside of the Last Page.
Thanks & Regards
Sukriti.

Hi All,
I know this is a very old post. Currently I am also facing same issue. Does anybody has solution for it. ?
Regards,
Leona

Smartforms - Extra Blank Page in DUPLEX mode

Hello Friends,
I am printing my smartforms in DUPLEX page mode. Its printing fine but i am getting an extra blank page.
Searched the forum but no luck.
I have defined 3 pages Page1, PAGE_INST,Page2. I need to print instructions(say) on back of each page.
I had set page1 to duplex mode 'D' and next page to blank.
My pages flow is in the following way:
page1>Page INST>Page2
Page 1 & 2 have main windows and have a command to print PAGE_INST.
Page_INST Does not has main window.
Page1 : next Page 2.
Page INST : Next page is Page 2.
Page2 : is a continuation of page 1 next window is blank(or page 2)
Its printing fine in Duplex but always there is a blank sheet in the print out at last page.
Can someone help me how to avoid the last blank page.
Thanks

HI Hari,
How to avoid a blank page at end of the page?
Regards,
Sravanthi

Smartforms output in Duplex mode

Hello Gems,
I have defined 3 pages and i had set all the pages to duplex mode.
I need to print set of instructions in my smartform output in duplex mode (front & back of page)
Page1 : next window is Page 2 and i have a command to print Instructions (page INST)
Page2 : next window is blank(or page 2) and i have a command to print conditions (page INST)
Page INST : Does not has main window and next page is Page 2.
My pages flow in the following way:
page1>Page INST>Page2
Page 1 & 2 have main windows.
I need to see the INSTRUCTONS on every page that is printed with data. But i am getting an extra page that is blank
with no INSTRUCTIONS at the back.
when i print, i am 1st page properly but also getting an xtra blank page with no INSTRUCTIONS on the back.
Can some one suggest me ?
Thanks
Dan

Hi,
Define a first page named FIRST for a form to be printed in duplex mode. You therefore set the Print mode in FIRST to D.
To make the duplex printing work correctly, you must define a second page FOLLOWER in which Print mode is left empty. In the form definition, you specify FOLLOWER as the follow-on page for FIRST and for itself as well.
Your text is then printed in duplex mode. FIRST switches the printer to duplex mode and forces printing of the first page on the front side of a new sheet. FOLLOWER accepts the duplex mode and sends no further mode print controls to the printer. The printer therefore alternately prints FOLLOWER pages on the fronts and backs of sheets.
For more details please refer to the below limk
http://help.sap.com/saphelp_nw70/helpdata/en/d1/802e77454211d189710000e8322d00/frameset.htm
Thank U,
Jay....

Configurations done at SAP gui level to print in duplex mode

Hi Gurus,
We had a requirement to convert a printer to duplex mode, we changed all the settings at SAP level( kept duplex mode in printing mode and changed device type to SWAN (as post and pre2 device types are not available) ). But still we are not able to get the desired duplex mode.
Is there are any further settings or something done in server?
Is there any settings done at SAP gui to get the print as duplex from a report?
Thanks in advance....
Gopal.vvs

Hi,
Check the below links
duplex printing configuration in SAP
http://www.sap-basis-abap.com/sapab035.htm
Hope it helps you.
Rgds,
Suman

Printing on the A5 in duplex mode on the printer HP1606dn

Good day! When you print on A5 format in duplex mode on the printer only prints HP1606dn second page - the printer does not return the page to be printed on the other side. When printing on A4 prints on both sides of the paper. Format settings before printing exhibited true. The problem is the driver? Installed Software 2012-10-17, Version 9.0
Need help! FNX

Don't know the answer, just a comment:
The User Guide manual states:
The printer driver only supports certain media sizes for automatic duplexing.
Use the manual duplexing procedure for media sizes not available in the printer driver
although it doesn't appear to say which sizes are affected!

Print in duplex mode

Hi experts,
I need to print on duplex mode ABAP list documents. My printer works with HPLJ4 PCL5 driver (ricoh Aficio 3045) on SAP but when i try to print on duplex mode (the printer properties are set to print on duplex by default) i can't get it.
I don't use Smart forms. On SPAD i have created a new device, the acces metod is F: Printing on front end computer, the device type copy of original HPLJ4 to test it, but i only can get paper printed simplex.
Please, Can you help me?
Thanks in advance

Hi,
The duplex settings in SPAD only work for device types that have the special list driver, Try using device type HPLJ4000 instead of HPLJ4 and create a new spool.
Regards,
Aidan

Can't log in with valid password, can't boot from disk, can't access disk utility, in single user mode can't reset password as appears locked in caps mode with '?' for forward slash, can anyone help?

Can't log in with valid password, can't boot from disk, can't access disk utility, in single user mode can't reset password as appears locked in caps mode with '?' for forward slash, can anyone help?

Which keyboard layout you were using? German, French ... I suppose your layout is reset to the default: US and you are unable to find the "?" or "/" ...
Please have a look into the keyboard viewer, to see how the layout of your keyboard is actually.
marek

My ipod touch is locked in expanded mode. It happens every time I do a itunes update. I've tried to soft reset then a hard reset. Neither has resolved the problem. The screen goes back to normal but expands and locks during sync. help

My ipod touch is locked in expanded mode. I can not get to the controls. It happens everytime I do an itunes update. I have tried a soft and a hard reset which fixes the problem but then during syncing the screen expands again and locks up. Help.

tell me abt software version ...????
was it jail break or not???
reply these two and i will tell u further...

HT201263 My ipod touch is locked in recovery mode and I need help

The ipod is locked in recovery mode. Everytime I plug it into the computer iTunes pops up and says it has detected ipod in recovery mode and it must be restored before using it with itunes.
After I go throught he extracting software and then it locks up in itunes saying its waiting for the ipod but it just sits there for hrs with no result.
I need help please

No. You have to restore. To allow the restore try the following:
- A reset.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Manually placing the iPod in Recovery Mode
- Placing the iPod in DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If you can't turn the iPod off, let the battery fully drain. After charging for at least an hour try the above again.
- Try on another computer.
- Make an appointment at the Genius Bar of an Apple store.

My iphone 6 is locked in zoom mode and is unusable. how do i fix this?

My I phone 6 is locked in zoom mode and I cant get out. Display is on standard but remains in zoom mode....what should I do?

Well start with the usual of restarting your iPhone. If this doesn't solve your problem I would suggest backing up your iPhone then restoring it via iTunes.

How to print a PDF document in duplex mode using command prompt?

I want to print a pdf document in DUPLEX mode by command prompt.Already tried with /p and /t.

Hello Ram,
Please see this link - http://www.coolutils.com/Print-PDF-duplex-cmd
~Deepak

HP Laserjet M1212NF USB no longer printing in manual duplex mode

Hello All,
I am currently having issues with my HP LaserJet M1212NF printer connected via USB. First, basic system information:
Windows 7 64-bit
Now, some backstory:
The printer was initially setup using Network installation. Then, I moved and could no longer access the network, so I deleted it from the Windows Device and Printer area and reinstalled it as a USB perinter. I installed all the updated drivers and Firmware updates. The printer now CANNOT print in duplex mode. I choose Manual Duplex in the printer settings AND when I print a multipage document. The printer simply prints the document normally, with no duplex. Please help. I've googled the problem, but have come up empty handed.

Hi Wilhendrickx,
I understand you aren't able to print two sided.
Thank you for your reply.
I will be happy to help you with this.
You can set the two sided option two different ways. Try both to see if it makes a difference.
To set the two sided printing for all print jobs.
Go to start, devices and printers, right click the printer, left click printer
properties, click on the finishing tab and check Print on both sides, (manually) apply and OK.
To set the two sided printing for 1 job.
From the application go to file, print, preferences, click on the finishing tab and
check Print on bot sides, (manually) apply and OK.
Disable the bidirectional support to see if that will make a difference.
Go to start, devices and printers, right click the printer, left click printer
properties, click on the ports tab at the top, uncheck Enable bidirectional support.
If it didn't work then go back in and check it again.
I would download and run the Print and Scan Doctor since it might resolve the issue
automatically.
Find and Fix Common Printer Problems Using HP Diagnostic Tools for Windows.
If that doesn't work then I would uninstall and reinstall the printer software.
Uninstalling the Printer Software.
Here is a URL to download and install the latest drivers again.
HP LaserJet Pro M1212nf Multifunction Printer Drivers.
Try the two sided printing now.
Hope this helps.
Thank you for posting on the HP Forums. Have a great day!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

I have a 5C, the screen broken it only shows the backlight. Problem is its locked in airplane mode any ideas on how to get it out?

Phone is locked in Airplane mode, Is there a way to get it out without having to use the touch screen because it is broken.

No. That is a software switch, and could only be activated/deactivated from the screen. I suggest you make an appointment at the Genius Bar of the nearest Apple store to see about getting the device repaired. Many of the Apple Stores are now equipped to repair/replace screens in house. I had one replaced today for my daughter's iPhone 5c in the US and the cost was $129.00 plus tax.

P2055dn Locked in Duplex Mode

Similar Messages

Maybe you are looking for