P2V migration and IP Address change

Hi,
We're using Business Objects Enterprise 11.0.0.748.  We're trying to move our server into a virtual environment.  Part of this process requires an IP address change as well.  After the conversion, the BOE services fail to start.  Is there any known issues with P2V or IP address changes?

If all of your users disappeared, then it sounds like the application/publication had been dropped and re-created on the mobile server
Depending on whether or not there are users associated with the application, the publish seems to slightly different checks (as if there is a user defined, so will the data subsetting value and it can do a test select, rather than just a syntax test)
You could try re-publishing the application and see if you get any errors (set GLOBAL tracing in the mobile manager and this will let you identify the publication item throwing the error and why)
sometimes there are no errors, but the users still do not get instantiated. This is a pain to track down - last time i had to do this i had to cut all but one of the publication items out of the application, publish, check the user instantiated and then repeat this adding in the publication items one at a time until the user became de-instantiated. The root cause that time was a view containing a table cast that was defined as fast refresh and although syntactically correct (which is why no error), the mobile server could not cope with this. Changing the publication item to be complete refresh fixed it in theis case

Similar Messages

  • Billing and shipping address changes

    I have tried to change my billing and shipping address from my New Zealand address to my Canadian address but there isn't an option to change the country from new Zealand to Canada. HELP I want to send a book I have created to my sister for Christmas!

    I believe that you shipping information must match your credit card information
    see http://www.apple.com/support/photoservices/account/ for moe information and a form to ask Apple questions
    Message was edited by: LarryHN

  • SG300 inter-VLAN routing and MAC address changes in incoming packets

    Hello
    I have SG300-20 working in Layer3 mode
    VLAN1 is not used
    Internet gateway is in VLAN211
    Clients are in other VLANs
    Switch is default gateway for clients and itself has internet gateway as default route.
    MAC address of switch is XX:XX:XX:XX:XX:63
    When client sends trafic to Internet destination MAC address in outgoing packets is XX:XX:XX:XX:XX:63
    But in incoming packets source MAC address is XX:XX:XX:XX:XX:69
    Why does it change? And how can I setup switch to use only XX:XX:XX:XX:XX:63 MAC address?

    Hi Robert,
    I'd like to pick up this old thread because we have a huge problem with the behavior of the SG300 router/switch regarding the "spoofed" MAC source addresses. We have connected this switch to another router which has some special routing capabilities. It routes certain IP packets directly to MAC addresses which it learned from snooping on special traffic.
    When connected to a SG300 router with an Ethernet base address of XX:XX:XX:XX:XX:48 we receive packets with Ethernet source addresses like e. g. XX:XX:XX:XX:XX:49 or XX:XX:XX:XX:XX:4D (depending on which hardware port they came from). Our special router "learns" these MAC addresses and tries to send associated outgoing packets directly to these addresses using e. g. XX:XX:XX:XX:XX:49 as the MAC destination address.
    Our problem is that the SG300 does not forward the packet if the MAC destination address is not equal to the switch's Ethernet base address (XX:XX:XX:XX:XX:48 in our case). This renders the SG300 series useless for our systems.
    Is there new firmware available which fixes this problem for us? We don't care which MAC source address the SG300 uses in incoming packets we receive, but we expect that the SG300 handles packets correctly for outgoing packets we send with this MAC address as the destination address.
    Thanks,
    Chris

  • DHCP reservation BAD_Address and Mac Address changes.

    Ok.  I understand about Bad_Address and the things that can cause it.  That said, I am using Window 2003 and we are running DHCP.  Yesterday we had a series of short power outages.  Some were right after the other (1 or 2 seconds) others
    were 10 to 40 seconds in between.  The server (of course) has a UPS and so does most of our infrastructure (switches etc).
    But it seems that one type of Printer that we have, were all switched to bad_address and they could not pick up their reserved IP address.  Some of them seemed to remember their IP and are still functional, even though their reservation says bad_address. 
    I assume they will fail either at lease renewal or the next time they are power cycled.  What surprised me was that these bad_address entries' reservations were changed to have an invalid MAC address.
    All of them start with a 0 or a 1 and are only 8 characters long.  0401150a, 1701150a, 1901150a, hmmm.   i see a pattern forming.  They all have unique first 3 characters, but everything after that is 1150a.  That led me to figuring
    out what this number is.  It's an inverted hexadecimal representation of the ip address that is being complained about.  Why would the DHCP server replace the MAC with this convoluted string?   Is this covered in any manual?  
    I am pretty sure it's not in the DHCP RFC. 
    Not sure why it was having the problem, unless somehow the printers were powering and made the DHCP request then discovered that the old lease information was kept somehow (remember, some of the outages were very brief) after the request had gone out. 
    But that, and nothing else I can think of makes sense.  And it only happens on one model of our printer.  At least so far.  And this isn't the first time we've seen it happen this way. 
    Any ideas appreciated.
    Chris

    Hi Chris,
    Firstly, it seems that the Unique ID of the DHCP Reservations are inverted to the IP addresses in hex. And, the most possible cause is IP conflict.
    For example:
    0401150a -> 04 01 15 0a (hex) -> 4 1 15 10 (decimal) -> 10.15.1.4 (IP address)
    Meanwhile, I agree with the possible cause as you said, however, would you please kindly let us know the following:
    1. How many DHCP Servers do you have? Or, is the DHCP Server multihomed?
    2. Do the printers have multiple NICs?
    3. Are the printers both statically configured and have DHCP Reservations in the DHCP Server?
    4. DO other DHCP clients in the same scope have the same issue?
    5. Is there any trace in DHCP log?
    In addition, if Conflict detection is enabled in your DHCP Server, please disable it and see how it works.
    Also, please check if you can get some clues from this TechNet Thread:
    DHCP server bad address issue
    In addition, as the issue only occur with the same model of printers, it is worth to contact the vendor for their insight on it.
    Hope this helps.
    Jeremy Wu
    TechNet Community Support

  • My Account Has Been Hacked and Email Address Changed

     Hi  I have logged a request for this and have received a ticket number # 03369303. The email I have received back isn't clear as to whether the issue is being dealt with or whether I have to go and find the solution myself from the support channels suggested in the email itself.   Can someone clarify? Cheers Mark  

  • Changing Domain Name and IP address of a server

    We have an Oracle 10G server (running on Windows) that needs to have its domain name and IP address changed. I did a search on this forum and found similar threads to this one (e.g. Rename server name & change domain Just wondering if anyone has any other comments to make that haven't been mentioned previously.
    Looks like on the server side, we just have to change the listener and tnsnames.ora file. Anything else we have to worry about? (Unfortunately this is something I've never done before.)

    TomF:
    Yeah I know the listner SHOULD be the only thing that needs to know the server's network information. However, databases are big, complex pieces of software, and I'm just a bit paranoid that there's some system variable that needs to also get changed that I might be overlooking.
    You suggested I might need to change the global_name... Upon further research, I've found references to other variables that may need to change... local_listener, remote_listner, and dispatcher. (Note: I don't have the Oracle documentation handy so I can't verify how valid those are.)

  • Migrate WSUS server from 2003x86 to 2008x64, new hardware, use same name and IP address?

    Searching through the WSUS forums and reading the TechNET migration documentation, I have bits and pieces of information to make this a smooth transition...I think. I have a plan in mind but
    would like the communities input on what I am thinking before moving forward and having it blowup in my face :). <o:p></o:p>
    I have the following currently:<o:p></o:p>
    A single WSUS 3.0 SP2 server, running on Server Win2003x86, using the default WID (susdb.mdf) on the same server. I have SQL 2005 Express installed on this server as well for other services
    but this has no bearing on the WID correct?<o:p></o:p>
    What I would like to do:<o:p></o:p>
    I have a new server (a much better one) that I would like to move WSUS on to, that will be running Server Win2008x64 (I have to setup first). <o:p></o:p>
    Steps that I would like to follow:<o:p></o:p>
    1. I will go through and setup this new server with all M$ updates etc... under a new name (ex. wsusnew) and DHCP acquired IP address and then power it down. <o:p></o:p>
    2. Get on my current WSUS server and backup all current WSUS settings, groups, DB etc... to a network location for temporary storage. Then power it down.<o:p></o:p>
    3. Delete the current WSUS server computer object in AD, DNS entry I will leave because my intension is to give the same IP address to the new WSUS server.<o:p></o:p>
    4. Start the new server, static assign the IP address from the old WSUS server to this new server and then change the name of (wsusnew) to the old servers name, which should be ok sense I deleted
    the AD object in step 3.<o:p></o:p>
    5. After the obvious restart, the new server will have the same name and IP address as the old server. <o:p></o:p>
    6. Now that the new server is up (with same settings name/IP as old server), I will then go through and install the WSUS role on the server and restore my WSUS information.<o:p></o:p>
    Questions:<o:p></o:p>
    1. Step 2 above, is it possible to do this, without making replica servers? I kept reading about this as I was researching doing this, I would rather just copy the DB and folders and simply
    put them in-place on the new server.<o:p></o:p>
    2. Step 6 above, restoring of the data, what is the proper way to do this in the scenarioI described? <o:p></o:p>
    Thank you to anyone who can provide me some information.
    Jeff

    Thank you for the reply, I will follow and let you know. Proabably be next week sometime before I'm able to try though. So look for a reponse then. Thank you again.
    Jeff
    OR...
    You can use the much more simple, much more reliable, and much more proven method of:
    Install new server as a replica of the old.
    Replicate.
    Configure new server as upstream server.
    Point clients to new server.
    Turn off old server after all clients have redirected to the new server.
    For everybody that has tried the backup/restore the database procedure described above, they have encounted complications of one form or another.
    WSUS has a built-in and fully supported comprehensive replication capbility. use it! :-)
    Lawrence Garvin, M.S., MCITP:EA, MCDBA, MCSA
    Microsoft MVP - Software Distribution (2005-2012)
    My MVP Profile: http://mvp.support.microsoft.com/profile/Lawrence.Garvin

  • How do I change my username and email address?

    I am unable to find where to change my iTunes Store username and email address. There's nowhere on this site to be able to change it. Can I only change it through iTunes?

    You can edit your Apple ID(which is your iTunes Store account name) via Apple's My Apple ID website https://appleid.apple.com/com by following these steps:
    1.) Click "Manage your account" on the right hand side of the page.
    2.) Click edit next to your Apple ID and Primary Email Address.
    3.) Edit your account name to the desired email address.
    4.) Click Save Changes.
    Hope this helps.

  • How do I change password and email address?

    I cannot change my password and email address because I am based in the UK and not in the US. When I try to make a change and save it, it says I have made a mistake on the fields marked red and asks me to complete the parts in red including: the state I live in and because I am not in a state it doesn't allow me to change my details. It also has a problem with my country's telephone code. Does anyone know how to resolve this?

    https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/

  • How can I migrate from Outlook 2011 to iCal and Apple Address Book in Mavericks now that synching is no longer possible?

    Now that I am on Mavericks and no longer able to sync between my iPhone/iPad and Outlook 2011 on my MacBook Pro, I'm finally taking the leap (which I should have done long ago) and abandoning Outlook 2011 all together (doesn't help that Outlook now prompts me to rebuild by Identity multiple times per day). I am hoping to export from Outlook to iCal, Address Book, etc, but I would love it if someone could check my steps.
    Delete iCal and Apple Address Book content -- Because I have old data in iCal and Address Book (that was synched before I upgraded to Mavericks), I planned to delete this data as follows:
    Manually deleting my multiple calendars in the iCal app
    Go to Go>Home>Library>Calendars and drag "Calendar Cache" to trash
    Go to Go>Home>Library>Caches and drag "com.apple.iCal" and "com.apple.AddressBook" to the trash
    Go to Go>Home>Library>Application Support and drag "Address Book" to the trash
    Export Outlook 2011 Calendars to iCalIs there a file format that I can use to export from Outlook 2011 and then import into iCal? I will use this file format to individually export each of my calendars from Outlook 2011 and import them into iCal.
    Export Outlook 2011 Contact List to Apple Address BookIs there a file format that I can use to export from Outlook 2011 and then import into Apple Address Book?
    Suggestions would be greatly appreciated.

    Hi acs4055,
    As per your query I found a relevant solution for resolving this,  actually I haven’t tried the steps you wrote here in your query.  But I found a solid key answer for exporting from Mac OS X Mavericks (10.9.1) Outlook 2011 to iCal for Apple mail. This is possible through Drag and Drop method via this you can undoubtedly migrate Outlook 2011 Calendar to ical format.
    Hope it will assist you and you will be able to attain a desired solution.

  • I recently changed my email address and need to change my icloud account both on my itunes and iphone. how do I do this without completely wiping the phone?

    I recently changed my email address and need to change my icloud account on both my itunes and iphone. How do I do this without completely wiping the phone.
    Also I tried to update to iOS6 and it is asking for my password under my old signin and locked me out of my phone.
    What can I do?
    Thanks

    This explains how to change your ID: http://support.apple.com/kb/HT5621.  After changing your ID you will need to go to Settings>iCloud, delete the existing account (which only deletes it from your device, not from iCloud), then sign back in with the new ID.  To avoid losing photo stream photos, save them to your camera roll before deleting the existing account.
    If you are signed into your account on your Mac, you will need to go to System Preferences>iCloud, sign out, then sign back in with the new ID.

  • "Error in Process" for POs after changing Tax codes and Vendor address

    All,
    We are in extended classic scenario and we have 2 POs with status "Error in Process"
    PO 1:
    The PO was ordered with 3 line items, Confirmed, Inovoiced. Later our accoutnig team realized there should not be tax for one of the line item in the PO. So they created Credit memo and asked our purchasing dept. to change PO from Taxable to Tax except.
    Now the porblem is, when PO chages to tax except in SRM, it is going to "Error in Process".
    What could be the reason?
    PO 2:
    The PO have 10 line items and Confirmed, No invoice is generated.
    Now the Purchsing want to change vendor address in the PO, they changed the vendor address in the PO.
    Now the porblem is, when PO changes in SRM, it is going to "Error in Process".
    I checked the RZ20 Traansaction in SRM, both POs have same errors:
    Backend application errors "Indicator for GR-based invoice verification used not allowed"*
    We removed 'Confirm Performance of Service/Goods Receipt' tick mark for the PO in SRM under follow on documents and it is throwing error saying it must be checked.
    Did any one got this error, what i need to check for this errors?. any help?
    Thanks
    Rams

    Hi,
    Once the PO is created . Confirmation made and invoice .Tax change will not be allowed.
    First reverse the Invoice.
    Cancel the confirmation
    then change in the P.O
    Do the Confirmation and invoice it will allow
    Regards
    G.Ganesh Kumar

  • Our home address changed and our AMEX card identity has been stolen.  So when i edit to change my address and AMEX number it won't let me and get this message: "YOUR SESSION HAS TIMED OUT.  TRY AGAIN.  How do I access the store to change my account????

    We moved and our address has changed.  Also our AMEX card identity has been stolen twice and AMEX has changed our number and security code twice already.  Now i am trying to edit my account at Itunes.  Every time I try to edit our account at Itunes,  I get this message: "YOUR SESSION HAS TIMED OUT. TRY AGAIN"  Anything i am doing wrong?  How do I get to the accounting department without getting this message?
    Thanks

    I am having this problem too. I recently changed ISP b/c I wanted the iPhone, so I had to update my iTunes username to my Gmail account.
    In fact, I logged in HERE using it as my new Apple Id... so it works!
    But for some **** reason that is driving me nuts my iPhone will not connect to the iTunes store using my new Apple Id. It keeps saying my email has changed or is invalid and asks me to sign in to change it. So I do that, and it lets me in USING MY NEW Apple ID!!!! Then I go back out to the buy the App and the madness starts all over.
    Come on Apple, do you want me to buy your apps, or what?

  • Want to change Public, private and vip address on RAC 10g R2 windows 2003

    The network section told us the configuration of the network who support our cluster will have to change all ip address.
    We are looking for a complet document who give all the step by step instructions how to make this change.
    We have to change the Public, private and VIP at the same time of our 3 nodes cluster.
    We know the OCRCFG will be impact. So we will take backup of it first.
    Can someone are able to indicate us how to procede to execute this task.
    Thanks

    Hi,
    i check the Note:283684.1 you give me, but it didn't give all the answers to my problem.
    I finally found a recipe to make the job. I would like to tell you it's not supported be Oracle, but it work very well
    Don't forget to take a good backup of the ocrcfg and vote disk before you start.
    Here we go:
    Stop all Oracle service on all nodes before the change of the address, the low format of the ocrcfg and vote disk
    change the address in the file host in C:\WINDOWS\system32\drivers\etc with the new address
    change the ip address in the window network definition connection with the new address
    ocopy \\.\ocrcfg d:\backup\ocrcfg.dmp
    ocopy \\.\votedsk1 d:\backup\votedsk1.dmp
    rem go to directory of the cluster binary crs\bin
    cd /D D:\Oracle\Ora10g\crs/bin
    rem Format raw ocrcfg and vote disk
    LogPartFormat.exe \\.\ocrcfg /q
    LogPartFormat.exe \\.\votedsk1 /q
    rem Run in prompt mode the cluster setup
    rem crssetup.exe config -nn %s_nodenumberlist% -pn %s_privatenamelist% -ch %ORA_CRS_HOME% -oh %s_OracleHome% -c %s_clustername% -l "%s_languageid%" -q %s_votedisklist% -g %s_usergroup%
    rem example for 2 node
    crssetup.exe config -nn host_name_node_1 ,1,host_name_node_2,2 -pn host_name_node_1-priv,1,host_name_node_2-priv,2 -ch D:\Oracle\Ora10g\crs -oh D:\Oracle\Ora10g\crs -c crs_lab -l "CANADIAN FRENCH_CANADA.WE8MSWIN1252"; -q "\\.\votedsk1"
    rem ensures that all nodes are configured with the same port for the ONS
    racgons.exe add_config host_name_node_1:6200 host_name_node_2:6200
    rem oifcfg to direct components to use specific network interfaces
    oifcfg.exe setif -global "Public"/10.200.5.0:public "Prive"/192.169.255.0:cluster_interconnect
    rem to rebuild the vip address vipca in wondow componant and make the incription in the cluster (in prompt mode or online)
    rem at the same time it will create the gsd and ons service
    vipca.bat -silent -nodelist "host_name_node_1,host_name_node_2" -nodevips "host_name_node_1/host_name_node_1-vip/255.255.255.0/Public,host_name_node_2/host_name_node_2-vip/255.255.255.0/Public";
    rem vipca
    rem check the state of the crs services (inscription)
    crs_stat -t
    rem now make the registration of the listener in the cluster.
    rem important don't use the prompt command below, it will give you a crs-0223 error at the startup service
    Rem to solve this problem use netca on line
    rem crs_register ora.host_name_node_1.LISTENER_host_name_node_1.lsnr -dir D:\Oracle\Ora10g\crs\crs\profile
    rem crs_register ora.host_name_node_2.LISTENER_host_name_node_2.lsnr -dir D:\Oracle\Ora10g\crs\crs\profile
    rem srvctl start nodeapps -n host_name_node_1
    ren srvctl start nodeapps -n host_name_node_2
    netca
    rem check the state of the crs services (inscription)
    crs_stat -t
    rem start oracle object service and cluster volume before registering and accessing to asm services
    sc \\host_name_node_1 start ”Oracle Object Service”
    sc \\host_name_node_1 start OracleClusterVolumeService
    sc \\host_name_node_2 start ”Oracle Object Service”
    sc \\host_name_node_2 start OracleClusterVolumeService
    rem go the the rdbms directory to make the registration of asm and the database
    set ORACLE_HOME=D:\Oracle\Ora10g\rdbms
    rem add the service asm in the cluster in my case asm1 and asm2 for my 2 nodes
    srvctl add asm -n host_name_node_1 -i +ASM1 -o %ORACLE_HOME%
    srvctl add asm -n host_name_node_2 -i +ASM2 -o %ORACLE_HOME%
    rem start the asm service on each node
    srvctl start asm -n host_name_node_1
    srvctl start asm -n host_name_node_2
    rem check the state of the crs services (inscription)
    crs_stat -t
    rem go to the bin directory of rdbms directory to make the registration of the database
    cd /D D:\Logiciels\Oracle\Ora10g\rdbms/bin
    rem register the database (in my case labotary lab) and the to database service (lab1 and lab2) of each node
    srvctl add database -d lab -o %ORACLE_HOME%
    srvctl add instance -d lab -i lab1 -n host_name_node_1
    srvctl add instance -d lab -i lab2 -n host_name_node_2
    rem finally start the database
    srvctl start database -d lab
    rem go to directory of the cluster binary crs\bin
    rem all the services
    cd /D D:\Logiciels\Oracle\Ora10g\crs/bin
    rem you can go in the database with sqlplus and check all your components
    crs_stat -t
    I hope this will help someone who are in the same situation
    Edited by: ron_berube on 2008-12-12 09:21
    Edited by: ron_berube on 2008-12-12 10:08
    Edited by: ron_berube on 2008-12-13 08:25
    Edited by: ron_berube on 2008-12-18 10:49

  • RE: 1) Changing name and IP address of an AIX 4.2 Server 2)Using NAT

    Daniel,
    you (normaly) just have to :
    1) edit the $FORTE_ROOT/fortedef.sh fileand change the value of variable
    FORTE_NS_ADDRESS
    2) shutdown and restart forte environment
    3) put the new values in the control panel of the client and run !
    It worked on our site with the same configuration (Aix 4.2)
    Good luck
    De : Daniel[SMTP:[email protected]]
    R&eacute;pondre &agrave; : Daniel
    Date : vendredi 18 juin 1999 13:08
    A : [email protected]
    Cc : Jose Ignacio
    Objet : 1) Changing name and IP address of an AIX 4.2 Server 2)
    Using NAT to reach forte
    Hello Forte Users :
        I have 2 questions to make:
        1)
        I've installed a Forte Server Central Node (Release 3.0.F.2) in an
    IBM RS/6000  with OS AIX 4.2
        (The name of the server is Name_1 and the IP address is
    125.125.50.50 with mask 255.255.255.0)
        Nowadays we had to change the name and IP address of this server
    lets say to Name_2 and 125.125.60.60 with mask 255.255.255.0.
        After that we try to find any reference to old name and IP address
    in the forte directory and all of its subdirectories changing them to
    the new ones.
        After these changes we found than forte could'nt start the nodemgr
    server.
        We have too many reasons to avoid installing FORTE again.
        Does anybody know if I have to change anything more to make
    nodemgr server work.
        2)
        The second question is about NAT (Network Address Translation).
        To reach a Forte Server Central Node from a Forte Client we have
    to pass through a Firewall and NAT.
        We are researching and at this moment we can not reach the server
    from the client, has anybody any suggestion to correctly configure
    Forte (Client and Server) to use NAT between them.
        If anyone could help me I would be very pleased.
        Thank you very much in advance,
        Daniel Gonz&aacute;Lucas (EAM Sistemas Inform&aacute;ticos SL, Spain,
    e-mail: [email protected])
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

    >> 15 Mins is not enough for completely the replication.
    >> use repadmin /syncall /aEpd   - for force replication.
    >> Wait 3 hrs minimum.
    Regards,
    Biswajit
    MCTS, MCP 2003,MCSA 2003, MCSA:M 2003, CCNA, Enterprise Admin, ITIL F 2011
    Blog:
      Script Gallary:
      LinkedIn:
    Note: Disclaimer: This posting is provided & with no warranties or guarantees and confers no rights..

Maybe you are looking for