P2V WMM 2012 100Mbit maximize bandwidth usage?

Hi,
I’m trying to make a p2v over a 100Mbit ipsec connection with vmm 2012 where in my mind the 100Mbit is the limiting factor.
When I look at bandwidth usage during transfer I see a jigsaw maxing out at 95Mbit and min 40Mbit, the whole transfer takes about 10h. I would really like to use my full (> 90) bandwidth constantly to reduce this transfer windows, I got lots of server to
p2v…
Can’t find any documentation which components are involved and options, probably agent <-> agent and bits?
Anyone with experience that have tweaked this or know if something can be done to improve it?
I have no problem maxing out this 100Mbit with an ftp transfer... (constan > 90Mbit)
Thanks :)

Hi MatteDS,
I noticed the process of P2V , at the imaging phase it will use bits service
to transfer the data :
Imaging phase:
                  A Volume Shadow Copy Service (VSS) image is captured for each NTFS volume. If a dynamic destination VHD format is selected, this process captures data
only, not empty spaces.
                  Data is streamed directly from the source computer to the VMM host using Background Intelligent Transfer Service (BITS).
                  Each physical volume becomes a separate virtual hard disk.
Please try  to allow unencrypted file transfer , also disable bits service on the source host:
Open the VMM Administrator Console
Depending on your environment configuration, select the Host Groups (e.g. All Hosts) that has all of your Hyper-V hosts
Right-click on the Host Folder (e.g. All Hosts)
In the "Allow Unencrypted file transfers ", check the box
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

Similar Messages

  • [Solved] Unknown bandwidth usage coming from pacman mirrors

    Each 1 or 2 days, there is a brief unknown bandwidth usage coming my
    pacman mirrors, downloading about 15-20mb. I would like to know what is
    responsible for this behavior.
    During the bandwidth usage, I did the following commands to get some hints:
    $ tshark -i wlan0
    18.601379 192.75.96.254 -> [ my_ip ] TCP 1506 [TCP segment of a reassembled PDU
    18.604131 192.75.96.254 -> [ my_ip ] TCP 1506 [TCP segment of a reassembled PDU]
    18.604139 [ my_ip ] -> 192.75.96.254 TCP 66 41989 > http [ACK] Seq=173 Ack=3281761 Win=239040 Len=0 TSval=14001135 TSecr=3310908095
    $ sudo netstat -apntu
    Active Internet connections (servers and established)
    Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name
    tcp 0 0 [ my_ip ]:41989 192.75.96.254:80 ESTABLISHED 5331/python3
    where 192.75.96.254 seems related to the domain name of my first mirror in the mirrorlist:
    http://mirror.its.dal.ca/
    Last edited by ramboman (2012-03-04 22:30:02)

    In cron.daily, there is a "pkgfile" :
    #!/bin/bash
    . /etc/pkgtools/pkgfile.conf
    if (( $UPDATE_CRON )); then
    /usr/bin/pkgfile --update >/dev/null
    fi
    from package : pkgtools
    which seems to be the main suspect.
    Thanks fukawi2 to make me figure it out.

  • Limiting Bandwidth usage for MDT 2013

    Hello Technet,
    I recently built up a MDT 2013 platform (on server 2k8R2) for deploying our Windows 7 image to over 125+ computers in our building at the same time.  Our deployment server, which is a VM, is located on the same host and switch as our web server
    (not my design) and I am forced to limit the bandwidth usage to only 50%.  I know WDS was/is able to limit bandwidth usage when multicasting, but I haven't found anything online about MDT being able to limit it.
    Do I need to have the WDS role installed on my server to limit the bandwidth or can MDT 2013 do this for me.  As always, any and all help is appreciated!
    Please remember to click "Mark as Answer" on the post that helps you, and to click "Unmark as Answer" if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

    Hi,
    Read these references to see if it meet your requirement:
    Enable Multicast Deployments with MDT 2010/WDS on Same Computer
    http://deploywindows7.wordpress.com/2010/09/20/enable-multicast-deployments-with-mdt-2010wds-on-same-computer/
    Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
    Windows Server 2012: Master Windows Deployment Services
    http://technet.microsoft.com/en-us/magazine/dn163597.aspx
    Karen Hu
    TechNet Community Support

  • How can I maximize the usage of my Apple products when running my small business?

    I use Apple Products for everything. I recently opened my own women's clothing boutique and I am also a clothing designer. I want to utilize my products to the fullest. I have an iPhone, iPad Mini, MacBook Pro and another iPad for my register at the boutique and all other business things. What are some apps that I can use to maximize the usage of my products? I see all these amazing things on the commercials but I can never narrow down the things that would benefit me.

    Nope.

  • How can i calculate the bandwidth usage of my Azure subscription?

    Hi,
    I know currently there is no API which provide bandwidth usage details. Is there any other way to find out my subscription's bandwidth usage?
    Thank you!

    Hi,
    Please have a look at below thread.
    #http://stackoverflow.com/questions/4590682/how-to-measure-windows-azure-bandwidth-usage-programmatically
    Here is a snippet.
    The Azure SDK doesn't provide any billing or consumption information programatically. As lgorek stated, you can approximate usage with IIS And WCF performance counters.And you'll also be able to use your own logging to track traffic from different users. 
    However, you won't be able to track bandwidth consumed when users download content from blob storage. Well, you could, but only if all of your blobs were private and you streamed their content through your web application instead of direct links on your web
    pages .
    Best Regards,
    Jambor
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Bandwidth usage with homesharing

    I have recently found my bandwidth being used while streaming from Macbook Pro to Apple TV whilst using Home Sharing. Watching a 1.2 GB movie streamed from iTunes to Apple TV uses 1.2 GB of bandwidth!
    I have reset my Apple TV but the problem continues.
    I have disconected the Bell modem from the internet and the problem goes away. The Macbook streams efficiently to the Apple TV using the home wireless network.
    Has anyone encountered this problem? And, more importantly, can anyone suggest a solution.
    Thanks for any help you may be able to provide.
    D

    Hi diesel vdub
    I am definitely using the Computers icon of my Apple TV. I have factory reset the modem but the issue remains. As I mentioned before when the modem is on, but disconnected from the internet, movies and videos stream fine to the Apple TV with no significant bandwidth usage.
    D

  • WRT160N Bandwidth usage

    Does this router monitor or meter bandwidth usage? Using Vista Home Premium OS, two other computers with WMP54GS and WMP54G PCI adapters and a PSP.
    Can it be configured to monitor or meter usage? Can I see the actual usage in real time?
    Question 2: (I can ask this elsewhere if you want) Is there a way to extend the antenna on WRT54G & S adapters since they tend to become shielded by the computer case itself?
    Thanks

    No Linksys router do not monitor band width.nor they can be coinfigured to do so. You can use high gain antennas for the adapters.

  • 100 percent bandwidth usage

    I have two 2 Cisco 2821-VK/9 routers between 2 offices. The connection between the 2 is a 2 Meg diginet line.
    When ever I copy a file between the two sites that is more than 1 Gb in size, the bandwidth usage is 100 % and it takes a very long time to complete.
    Could you please advice what I should do.
    Regards
    Cyril

    Hi Cyril,
    I'll assume since you're posting in the UC section that your question in some way relates to voice/video traffic on that link and perhaps not just to the length of time taken to copy large files.
    you might want to consider implemented a QoS policy on your network if there isn't one already in place.
    You can start with some light reading here.
    http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/5x/50nstrct.html#wp1043960
    It won't make your 1Gb files copy faster but it can help stop them choking off your other network traffic.
    regards,
    Paul

  • What is the actual bandwidth usage?

    When I use Adobe Connect I am online and broadcasting for about 4 hours a day, for 10 days at a time. I only do screen sharing and voice -- no video.
    I have DSL Internet. The DSL upload speeds are very poor (under 1Mb). To speed things up, I thought I'd look into getting a 4G hotspot, but I'm worried about actual bandwidth usage, since such plans have a practical limit of 5 or 10Gb per month.
    My off-hand guess is that If I were to watch a video of myself, I guess it would be a couple of gigs for a four hour, non-HD video. So by that very rough guestimate, I'd hit 20Gb pretty easily over the 40 hours of my meeting. Is that right the way to think about it?
    Has anyone monitored actual consumed bandwidth for a simple meeting of one person talking and sharing his screen? I'm not looking for definitive answers -- just some ballpark estimate of what such a meeting consumes each hour...
    Thanks! :-)

    Page 22 of this document will give you some numbers that will allow you to estimate the total data used for a meeting. Keep in mind these numbers are what Adobe saw as average consumption, yours may be higher or lower.
    http://www.adobe.com/content/dam/Adobe/en/products/adobeconnect/pdfs/web-conferencing/Adob e-Connect-9-Technical-Guide.pdf

  • Calculate bandwidth usage

    hi
        i m developing live video broadcasting app in fms.. hw to calculate bandwidth usage for each and every user

    hi,
    for checking bandwidth usage
    http://www.adobe.com/devnet/flash/apps/flv_bitrate_calculator.html

  • Adobe CC - Bandwidth usage

    I live in the sticks, unfortunately my only option for internet is satellite which has limited monthly bandwidth usage. My question is, Abobe CC constantly send and receive data, which would use my bandwidth usage?

    Hi Fabian,
    Thanks for your interest in Typekit!  The font licensing through Typekit does not include the option to embed the fonts in a native app. In order to use a font in an app, you will need to purchase a separate license from the foundry.
    For more details, please refer to the "Typekit Font Licensing" help page.
    We hope to be able to support embedded fonts in the future, but it isn't available at this time. Sorry I couldn't be of more help; please let me know if you have any other questions.
    -- liz

  • High bandwidth usage while inactive

    Twice today I've glanced at Activity Monitor's Dock icon, which I have set to view Network Usage, and saw a large amount of data streaming continuously through my internet connection.
    This morning when I noticed it for the first time, I poked around my system, and after not seeing any other programs (Safari, Software Update, etc.) being active, I tried quitting Messages Beta - and the bandwidth instantly dropped down to nothing. At that time, it was moving around 60KB/sec upstream, and probably around half that downstream according to Activity Monitor.
    A few minutes ago this evening, I saw it happen again - my Activity Monitor was showing heavy continuous bandwidth usage. This time I simply set my status to 'Offline' in Messages Beta and once again it instantly dropped down to nothing. This time the bandwidth was closer to 160kb/sec upstream, and half that downstream! When I changed my status back to 'Available' a few seconds later, everything continued on normally, with almost no data usage.
    I had no active chats going, never used video, screen or file sharing - so what in the world is Messages Beta doing with so much data streaming? I'm quite mystified, and wondering if anybody else has seen this happen....

    The issue seemed to be local network traffic.

  • FF resolution settings to lower bandwidth usage

    Which versions of FF will do this and what specific settings are there to lower bandwidth usage?
    Also, will the FF settings override settings on websites such as youtube? For example, if my kids were to click on higher resolution or HD video settings for their youtube videos, what would happen?

    Changing the resolution doesn't have any effect on the Firefox performance and may even look worse if you operate an LDC monitor not in its native resolution.
    You can block content if you ant to improve performance on a low bandwidth connection.
    You can look at Adblock Plus.
    * Adblock Plus: https://addons.mozilla.org/firefox/addon/adblock-plus/
    You need to subscribe to a Filter list (e.g. the EasyList).
    * http://adblockplus.org/en/subscriptions
    * http://adblockplus.org/en/getting_started

  • Maximize CPU usage

    environment
    Windows Server 2008 R2 standard with 24 cores (Intel Xeon CPU X5675; 2 physical processors)
    Weblogic 10.3.2
    Sun jdk 160_020
    Hello,
    I'd like to know whether they are any possibility to maximize CPU usage for a weblogic instance?
    Currently we have a windows server whit 24 cores dedicated to one Weblogic managed server.
    Our application faced bottlenecks the last 2 days for an hour.
    Looking at system metrics, CPU usage is not higher than 15%
    Looking at CPU usage for my weblogic instance, it's not highr than 5%
    Now If I look at some Weblo metrics:
    Default Thread Pool increased to 400 while number of idle thread was close to 0
    Number of pending user requests increased dramatically in correlation with the number of hogging threads while the throughput was quite stable.
    Therefore I'm wondering whether there's any CPU usage limitation or how to maximize CPU usage?
    I believe the slowness is due to the application, nevertheless I just want to make sure there isn't any weblogic setting that could optimize the throughput.
    Thanks for you advices.

    Well you are asking us to do the dev's job while you don't even know what the job is. If the dev needs help (a big if, it seems the dev knows what he/she is doing) then the dev can ask here with specific goals (e.g. what part of program can be paralleled
    to utilize idle CPUs), with details about the architecture of the program (which you don't have).
    Also such rewriting comes with risks of breaking stuff that are already working besides labor cost. The dev may decide it is not worth the rewriting if the cost is too high compared
    benefits to the user, just saying. 
    Visual C++ MVP

  • Measure the Network bandwidth usage

    Hi,
    For application server, is there any Oracle tool to be used to measure the Network bandwidth usage?

    Hi，
    The following policies are supported in Window 7
    Computer Configuration | Administrative Templates | Network | Background Intelligent Transfer Services (BITS) |Set up a maintence schedule to limit the maximum network bandwidth used for BITS Background transfers
    or Set up a work schedule to limit the maximum network bandwidth used for BITS Background transfers
    see this link
    http://blogs.msdn.com/b/wmi/archive/2011/02/02/bits-more-flexible-bandwidth-limit-policies.aspx
    And download speed is also related with your network connection, your ISP, setting in your router, your system perfrormance...
    Yolanda Zhu
    TechNet Community Support

Maybe you are looking for

  • OS7--sorting albums in horizontal (flow) view

    How can I sort albums by artist rather than by album title in horizontal view for iPhone OS7?

  • Application Error - The parameter is incorrect

    During a call on skype, as I was playing a video game, my computer encountered a "blue screen of death". I figured there was something wrong with my hard drive but when my computer rebooted, it seemed fine. However, after my computer attempted to sta

  • Program Compiles, but Exception in thread "main" error is thrown

    Hello everybody, I am getting the following error when I try to run my program. It compiles fine, but a Exception in thread "main" error is given when I try to run the program. This is the full error: Exception in thread "main" java.lang.Error: Do no

  • FLV takes half second to load in a SWF. Any way to eliminate the "white flash"?

    I understand its not a perfect world and computers need to load things etc. But is there any trick to having an FLV play right away eliminating that half second of white? The only thing I can think of is to export the first frame of the video as a jp

  • Macbook Air Or Macbook Pro for Travel

    Hi all, In recent times I have been travelling quite a bit, and will be doing so again. My problem, travelling with my DSLR, iPod and Macbook Pro 15" has become a bit too much-mainly the weight of the macbook Pro. I am thinking of getting the the Mac