P3005x printing a line of characters down the left side of the page

Hi,
The characters appear to by letters and numbers.  They appear to be the first character in otherwise hidden lines of characters.  The spacing bewteen each character is sometimes single spaced and sometimes double spaced.  I've run a number of Cleaning Sheets (from Staples) through all three print paths.  No Change.  I've changed toner cartridges.  No change.  Ive replaced the Toner Cartridge.  I always use Genuine HP cart's.  Is the drum part of that cart?  If not, do I need to replace the drum?  If not what is the solution to this problem?
Thank you,
Michael

Do you mean that the bookmarks sidebar (View > Sidebar > Bookmarks) gets disabled?
Try:
* http://kb.mozillazine.org/Corrupt_localstore.rdf
* Press F10 or press and hold the Alt key down to bring up the "Menu Bar" temporarily.

Similar Messages

  • Little horizontal lines at the left side of the page, printed on the HP Laserjet 4 plus?

    Folks, It seems that when I print to my HP laserjet 4 plus, I see some tiny horizontal lines on the left side of the printed page, spaced 4-5 inches apart, all at the very furthest left side of the page.  Is this something that I can turn off?  Are they some sort of binding marks?  I am printing to this printer via jet direct card, over TCP/IP, from a Windows 7 64 bit PC.  I love this printer, and recently changed out the exit assembly rollers, and now works like it was new.  I also have a 500 sheet drawer and a duplexer installed on it, and I would like to figure out how to get rid of those little horizontal tick marks that show up on the left side of the page.  Any help or assistance is GREATLY appreciated,  Thanks so much in advance!

    Hello  @MattDillon , and welcome to the HP Forums.
    I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at HP Commercial Forums.
    I hope this helps!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • Brand new laserjet pro 400 only prints about 1" down the left side of the page

    I just unboxed a brand new Laserjet Pro 400 for a teacher, and upon running a test print, the printer only prints about 1" of the text down the left side of the page.  The text fades to white, and the entire remainder of the page is blank!  I re-seated the toner cardtridges, ran the cleaning program, and am still getting the same results!  Any suggestions?  A scan of the page is attached.  It came out this way after each solution that I tried!

    To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
    I hope this helps!
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Why is the print area on all envelope templates more than 1/2 an inch from the left side of the envelope.. ? Can this be fixed or changed.. ?

    Why is the print area on all envelope templates more than 1/2 inch from the left side of the envelope.. ? Can this be fixed or changed.. ?
    I have pages 09 version 4.1... It is a small aggravation.. The left 3 or 4 characters on the return address would not print until I realized that by clicking on
    " View " & " Show Lay-Out " that it was out side the printable range ...

    It seems to be a Pages template  " Print range " issue..  Both the Epson and the HP printers were doing it and it was today that I realized why..  !!
    When I move it to where it will print there is large gap on the left margin of the return address..  Just wondering if anyone else knew about this.. ? My Pages is ' 09 ' version 4.1...

  • TS3276 When responding to an email, how do I suppress the "line" that appears on the left side of the originations email text?

    When responding to an email, how do I suppress the "line" that appears on the left side of the originations email text?

    Would you post a screen shot of a message so people can see what you are seeing? Make sure you cover any personal information using Preview. Post the screen shot in a Reply using the camera icon. Copy and paste doesn't work.
    Screen shots

  • Canon selphy CP510 only prints the left side of the page

    can anyone help me figure out the problem?  It printed fine last time I used it.  Today I plugged it in and only the left side of hte page prints.  I inserted a new print cartridge and same problem. 

    Hi hclemens,
    It is recommended that you contact live technical support . There is NO charge for this call. Real time feedback of a live technical support call would be very beneficial in this case.
    Please dial 1-866-261-9362, Monday - Friday 10:00 a.m. - 10:00 p.m. ET (excluding holidays). A Canon technical support representative will be able to resolve this issue faster.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • My HP color LaserJet 3700 has begun leaving a multi-colored band along the left side of the page.

    Now there is a colored band of ink on the left side of the page running from top to bottom. A local tech says the printer needs vacuuming. I am dubious. I have emptied the toner bottle already.

    Mine's doing the exact same thing. It's been suggested to replace the image transfer kit but I'm dubious....that part is rated for 60k pages and I have less than 17k - ?

  • My macbook keeps freezing with the left side of the screen on the right and the right side of the screen on the left. Help

    My 17-inch early 2011 macbook pro keeps freezing on me.  The freeze usually occurs when I'm importing or exporting pictures, when I stream anything, or If I am watching a dvd.  The left side of the screen shifts to the right and the right side of the screen shifts to the left.  lines also appear on my screen and I can not force quit any open application.  I have not dropped my laptop at all. 
    Mac OSX Lion version 10.7.5
    2.2 Ghz Intel Core i7
    I would like to avoid going to the an apple store to fix this problem if possible.  The closest one to me is 40 miles away. 
    Help : )

    If you don't have the Applecare extended warranty then you will need to pay for the fix. The fix is a New Logic Board. It seems as your Graphics card is failing in some way. No there is no software fix for this.
    The Graphic chip is soldered to the logic board and the only way to change/fix it is to replace the complete logic board.
    Good Luck and Best Wishes

  • Aperture 3 screen view. I have the adjustments, etc. on the left side and the picture on the far right side. The middle of screen is black. I need to get the picture back in the center of screen

    I have the adjustments, etc. on the left side of the screen. The picture is on the far right side of the screen. The middle of the screen is all black.How do I get the picture back in the middle of the acreen.  I believe I must have hit a button that moved the picture to the far right.

    On the Mac......
    Open up Macintosh HD > Applicatons > Utilities > AirPort Utility
    Click on the Time Capsule icon, then click Edit in the small window that appears
    Click the Network tab at the top of the next window
    Change the setting for Router Mode from the current DHCP and NAT to read Off (Bridge Mode), then click Update at the lower right of the window, and wait a full minute for the Time Capsule to restart to a green light.
    Then.....very important
    Power off the Time Capsule and your Arris modem/router for a few minutes
    Start up the Arris first, and let it run a few minutes by itself
    Start up the Time Capsule next the same way
    Your network will now be correct, and your printing capabilities will improve.
    If Time Machine backups do not occur now, post back and we will tackle that next.

  • How do I have a constant display of my bookmarks along the left side of the page as was possible in past editions of Firefox/

    I previous versions you could have all of your bookmarks displayed down the left side of the page (I cannot recall the technical term for this). With this version when I open bookmarks I get something called the library which looks like what I want but it's in it's own window which is not the way that it was in previous versions. How do I set up Firefox so that my page had my bookmarks always displayed. I do not like the toolbar option.

    You can make the Bookmarks visible in the sidebar via View > Sidebar > Bookmarks or the Ctrl+B keyboard shortcut.
    Press F10 or tap the Alt key to bring up the "Menu Bar" temporarily if the Menu Bar is hidden.

  • LJ4000n - Getting a black smudge (~1") all along the left side of the paper

    When printing to an LJ4000n we're getting a black/gray smudge, about 1" thick, along the left side of the paper - see below.  The toner has been changed, the printer has been cleaned (as per Chapter 3 - Printer Maintenance in the User Guide) and I did 2 rounds of Printer Cleaning Pages ('create' & 'process').  I'm at loss!  Any help / advice would be appreciated!
    This question was solved.
    View Solution.

    Fuser unit needs replacing. Open back door, using a flash light check the fuser unit and see the heater roller is damaged on the side in question.

  • How do i get the refresh button to not disappear after i have moved it to the left side of the address bar in firefox 8?

    when i customize the toolbar i moved the refresh button to the left side of the address bar, i also put the stop button and home button there as well. but after i click done when i have finished only the refresh bar disappears, but i can click customize and it reshows up in the same spot only to disappear again after i click done. it used to work just fine in firefox 3.

    I've attached a screenshot. You may have to move one of the buttons around a bit until it settles down. Alternatively you can also add a '''Separator''' ('''View''' (or '''Alt''' + '''V''') > '''Toolbars''' > '''Customize''') between the two.
    Useful links:
    [https://support.mozilla.com/en-US/kb/Options%20window All about Tools > Options]
    [http://kb.mozillazine.org/About:config Going beyond Tools > Options - about:config]
    [http://kb.mozillazine.org/About:config_entries about:config Entries]
    [https://addons.mozilla.org/en-US/firefox/addon/whats-that-preference/ What's That Preference? add-on] - Quickly decode about:config entries - After installation, go inside about:config, right-click any preference, enable (tick) MozillaZine Results to Panel and again right-click a pref and choose MozillaZine Reference to begin with.
    [https://support.mozilla.com/en-US/kb/Keyboard%20shortcuts Keyboard Shortcuts]
    [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder & Files]
    [https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode]
    [http://kb.mozillazine.org/Problematic_extensions Problematic Extensions/Add-ons]
    [https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]

  • Making The Left Side Of A Page 'Float' When Scrolling...

    Hello!
    Is there a way to make the left side of a page (i.e. http://www.bigmusicgeek.com/reviews/dreamtheater.html) 'float' with the right side of the page when a user scrolls down?
    Thanks!

    CSS position:fixed.  See my example:
    jQuery Smooth Scrolling with Fixed Layout
    Nancy O.

  • How to I make pop up windows go back to the left side of the screen when they are moving to the right?

    Whenever I click on a link, a new window pops up. That's good, that's what I wanted. They've always opened on the left side of the screen. However, they are now opening in the middle of the screen. This has happened before and the screen eventually opened completely on the right. Last time this happened, I ended up having to delete something. I don't remember what, but it solved the issue. Please help!

    You can check for problems caused by a corrupted localstore.rdf file.
    *http://kb.mozillazine.org/Corrupt_localstore.rdf
    You can also try to emove the Firefox plist file (org.mozilla.firefox.plist).
    *http://www.macfixit.com/article.php?story=20060606082246983 How .plist files become corrupt and troubleshooting the results
    Go to "~/Library/Preferences" and remove the plist file for Firefox (org.mozilla.firefox.plist)

  • I put in my memory card to the left side of the computer, but I cannot find the file of pictures anywhere. Its not even on my desktop. What should I do and how can I get it to show up on my desktop?

    I put in my memory card to the left side of the computer, but I cannot find the file of pictures anywhere. Its not even on my desktop. What should I do and how can I get it to show up on my desktop?

    If your Mac is new-ish and has one of the Lions as its OS, the drives, cards, USB sticks no longer show up, even though they're there. Go to Finder's Preferences and tick the corresponding items in the General and Sidebar tabs.

Maybe you are looking for

  • Multiple 11i instances in 10g OID.

    Hi All, I have added second 11i(11.5.10) instance to OID for SSO(10g ). After adding the second instance in OID, users which are common in both the 11i instances are not able to login thru SSO. Unique users are able to login thru SSO successfully. Bu

  • "ERROR: Could not read block 64439 of relation 1663/16385/16658: Result too large"

    Hi, I've already archived a lot of assets in my final cut server but since one week there is a message appearing when I click on an asset and choose "Archive". The pop-up says: "ERROR: Could not read block 64439 of relation 1663/16385/16658: Result t

  • Unable to view components in Object Browser & Properties window- Xcelsius

    Hi - I have prepared a dashboard which consits of many labels and just a few components. But as I proceed with taking more components on the dashboard ,I am unable to see the components  in the object browser and properties window (it is just visible

  • Applications not in 'Home' folder

    For some reason all of my apps are in the sub-folder, 'Applications'. The main 'App' folder is empty. I don't know how this happened. Is there an easy way to move/copy to main folder? Thanks!

  • Horizontal Spry Submenu does not appear correctly in IE

    I am building a site in Dreamweaver CS5 and my spry submenus do not appear correctly in IE.   I work on a mac, but have been checking my work on a pc.   I have tried looking through other posts and have made some corrections (I at least got the subme