P35 Neo 2 Fr - SATA drives not supported ?!?

I have just screwed together my new PC.
Motherboard : MSI P35 Neo 2 FR
CPU : Intel E6850
Mem: 2GB DDR2 800
Drives (2x): Seagate 250GB SATA
Windows: Vista Home Premium OEM (dutch)
It is a totaly clean install.
Problem is: When installing VISA it stops at the drive selection. It tells me (translate from Dutch): "the hardware of this computer possibly does not support the booting of this harddrive. Check that the drive controller is switched on in the BIOS"
When i'm in the bios (1.4) all seems well.
What to do?
EDIT: stangely, Seagate says on its site that : Seagate hard drives do not require any special drivers for Microsoft Windows operating systems. The generic hard drive driver should support your hard drive. We recommend using the latest Windows Service Pack (SP) updates as these often refresh the Windows drivers
This makes is hard to do a (what i have been reading)"F6 Disc & install driver" solution. Or are there non-brand specific sata drivers.
Help!

It was not my intention of installing the drives in Raid. I started out setting as AHCI.
Later on i tried setting as raid as MSI does have a driver for SATA Raid (on their site and on the supplied driver disc), unfortunately no success.
I think i must admit defeat. Tomorrow morning i will purchase a new IDE drive and install VISTA on this. I have the feeling it should then be easy to access the SATA drives.
Off topic (not really) : i downloaded the Seagate DiscWizard on my existing pc. This promises to solve all these kind of problems. But it refused to start because it needed at least one Seagate product installed on my pc. Hahahaha, of course my old pc is fitted with WD drives. Not very useful from Seagate.
Off topic 2: roll over bios, we need EFI

Similar Messages

OpenSQLException: JDBC driver not supported?

Hi @ all,
I need to connect to a DataSource with the WebAS 7 via SQLJ. As I try to connect to it with the SQL Engine set to "Vendor SQL" I get:
"The given connection "com.sap.engine.services.dbpool.cci.ConnectionHandle" is not an Open SQL connection"
As I try to get a connection to the dataSource via SQLJ with SQL Engine set to "Open SQL" or "Native SQL", I get the following Exception:
ResourceException in method ConnectionFactoryImpl.getConnection(): com.sap.engine.services.dbpool.exceptions.BaseResourceException: SQLException thrown by the physical connection: com.sap.sql.log.OpenSQLException: JDBC driver not supported for MS_SQL_SERVER database.
How can I get the SQLJ- Support?
Kind regards,
Uwe
Message was edited by:
Uwe Kunath

Hi Uwe, all,
for using Native SQL/JDBC or Open SQL/JDBC, the database itself and the JDBC driver must be recognized as being in the supported set. The answer to that depends on what you mean in detail by "Web AS 7". Roughly speaking, it should be the JDBC driver released by Microsoft.
Open SQL/SQLJ is only available with a Open SQL/JDBC data source. Hence, there is no way around using Open SQL/JDBC.
Now, Open SQL/JDBC and Open SQL/SQLJ both requires tables (and other database objects) to be deployed via the Open SQL for Java Dictionary. Up to and including WebAS Java 7.1, the Open SQL/Dictionary supports deployment to the system database, i.e. the database (and schema) used by the installed server itself.
Given the above, the JDBC driver for a Open SQL/JDBC data source must already be present, because it must be the driver used by the server itself. When defining data sources, it is referred to as "system driver".
This leaves us with a Open SQL/JDBC data source to the system schema. You can then also consider to establish a data source alias to the server's system datasource.
Hope this helps. Best Regards, Dietamr

Jabber 4.4 "Graphics card or driver not supported" error on one machine but not another.

Hi, I looked at the KB document but the email link on it no longer works.
I have two end-users using Jabber 4.4 on identical machines, same specs, same driver build and OS image. One gets the "Graphics card or driver not supported" error, the other does not.
We have two DellOptiPlex 7010's,
Both had 2 instances of AMD Radeon HD 7470 - they are dual monitor machines.
In both cases the driver version 8.922.0.0, Driver Date 12/6/2011. This is the latest Dell has on their website.
On one machine when I run a fresh install for Jabber for TelePresence 4.4 it works fine. But on another the user first gets
"supportabilitytest.exe has stopped working
A oriblem cause the program to stop working correctly. Please close the program."
Then when that's closed out we get:
"Graphics card or driver not supported!
New features in this version of Jabber Video are not supported by your computer's graphics driver.
Update to the newest graphics driver available and run Jabber Video again."
I can't believe it's just a matter of upgrading the drivers because in this case one machine with identical drivers works.
I appreciate any insights, thanks !

Hi ksouthall,
It sounds like the openGL supported version did not install on the one that is failing. There isn't much we can do regarding that error. Best practice is to always upgrade to the latest manufacturer's available driver. Client requirements are below.
Windows 7 (32-bit or 64-bit), Vista, or XP (SP 2 or newer), with OpenGL 1.2 or newer.
For 720p HD video calls, Intel Core2Duo @ 1.2GHz or better.
For VGA video calls, Intel Atom @ 1.6GHz or better.
Webcam, built-in or external. You need an HD webcam if you want other callers to see you in HD.
Broadband Internet connection with a recommended bandwidth of 768kbps upstream and downstream. You need about 1.2Mbps upstream and downstream for 720p HD video calls.
Regards,
Jason

SATA DRIVES NOT SHOWING IN SYSTEM PROFILER

Hi.
Thanks for reading this.
I found out that my SATA drives do not appear in my System Profiler.
I am running OS 10.4.7 on a PowerMAC G4 Dual Gig 2002 Quicksilver with
3 hard drives:
- TWO 250 GB SATA Drives (Both partitioned into 3 sections: 132 GB which is my MAIN drive, 90 GB which is used to back up music, and 53 GB which is used to hold finished work. The other drive is partitioned into 3 sections: 60 GB which is a back up of my MAIN drive, 126 GB which I record music to, and 58 GB which I use for Photoshop/Video finished work.) The SATA drives are connected via PCI card (described below)
- ONE 80 GB ATA Drive (Partitioned into 2 sections: 20 GB which has back up OS and 60 GB which holds my iTunes library.)
Here is what System Profile shows me:
Hardware Overview:
Machine Name: Power Mac G4
Machine Model: PowerMac3,5
CPU Type: PowerPC G4 (2.1)
Number Of CPUs: 2
CPU Speed: 1 GHz
L2 Cache (per CPU): 256 KB
L3 Cache (per CPU): 2 MB
Memory: 1.5 GB
Bus Speed: 133 MHz
Boot ROM Version: 4.3.3f2
Serial Number: XB2081EAM8H
Sales Order Number: M8667LL/A
ATA:
ST380021A:
Capacity: 74.53 GB
Model: ST380021A
Revision: 5.05
Serial Number: 3HV0XMWA
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Protocol: ATA
Unit Number: 0
Socket Type: Internal
OS9 Drivers: Yes
S.M.A.R.T. status: Not Supported
Volumes:
ATA Drive:
Capacity: 15 GB
Available: 5.51 GB
Writable: Yes
File System: Journaled HFS+
BSD Name: disk0s11
Mount Point: /Volumes/ATA Drive
iTunes:
Capacity: 59.4 GB
Available: 682.29 MB
Writable: Yes
File System: HFS+
BSD Name: disk0s12
Mount Point: /Volumes/iTunes
PCI Cards:
SeriTek/1V2E2 v.5.1.1,03/14/05, 23:42:20:
Name: Seri-Tek1V2E2
Type: ata
Bus: PCI
Slot: SLOT-3
Vendor ID: 0x8086
Device ID: 0x3200
Subsystem Vendor ID: 0x8086
Subsystem ID: 0x3200
ROM Revision: 5.1.1.1V2E2
Revision ID: 0x0000
Is this normal?
Is there a way to fix it?
I have noticed some strangeness while using Safari lately, could there be a connection?
PLEASE respond as if you are explaining this all to a COMPLETE idiot.
(Meaning technical jargon with abbreviated terms can cause confusion, just please give a descriptive response?)
Thanks!
And when I click on Serial-ATA I get:
No information found.
PowerMAC G4(2002 Quicksilver) Mac OS X (10.4.7) 2 Seagate SATA 250GB drives, 80 GB Seagate ATA drive, Digital Performer 4.6

Hi Tommy,
you could try reseting your PRAM to see if that makes any difference, as this holds your systems parameters. You shouldn't hurt your Mac by resetting them.
To reset PRAM hold down AppleAlt+PR on startup until it chimes 3 to 5 times then release.
Also...
Let the Mac boot after a PRAM reset then restart to reset your Open Firmware which may also help. At Startup hold AppleAlt+OF then type at the light grey screen (all without speech marks) "reset-nvram" then press return key. Then type "rest-all" then press return key again. Then type "mac-boot" press return to exit.
These command may help you they may not, but they shouldn't hinder you in any way. But if you are in any doubt about these commands by all means research them further on the Apple website or just ask for a second opinion.
Regards.
Rory

MS-7008 SATA drives not visible

Hi,
My MS-7008 ATX Mainboard has:
Supports Intel® P4 Northwood/Prescott (Socket 478) processor.
VIA® PT880 chipset
VIA® VT8237 chipset
- High Bandwidth V-link Client controller
- Integrated Faster Ethernet LPC
- Integrated Hardware Sound Blaster/Direct Sound AC97 audio
- Ultra DMA 66/100/133 master mode PCI EIDE controller
- ACPI
- Supports Serial ATA
- Supports USB2.0
Have been funning this motherboard for many years without problems. Until now, when I decided to use SATA drives in addition. Bought Samsung 1 TB (HD103UJ model) drive, connected to MB and fired up my W2K3 system.
To my large dissapointment drives did not show up in the list of available disks. I am looking under Computer Management - Disk Management. Device Manager shows some error under SCSI and RAID Controllers - VIA RAID Conntroller 3149 ... It has this yellow sign with "!" in it. Understand that driver for SATA migh be missing. Since that point I have been to tones of pages on web reading and searching, but after two days still no luck... Tried MSI page, VIA (producer of southbridge chipset) page, tried out many drivers I could find there, but still same message. On the other hand, those are not listed in computer start up post messages either. I checked all settings in BIOS, found only one regarding SATA and there it says enabled.
The only thing I did not check out yet is to play with HDD jumpers. Somewhere I read that by limiting speed of HDD one can make them appear. But I do not have jumper avalable and HDD manual is very unclear, not sure if I can do that even if I had jumper. Have only 4 pins ( two sets times two pins) so it is only 4 possible combinations, will try as soon as I get some pins.
Anybody else have any other idea??? Really painfull to search for something that should just work in "plug & play" mode

Unfortunatelly Disk Management does not show that disk. I am quite sure this has to do with finding right drivers. Furthermore, I hope that these drivers can be installed now, after system has been installed. I believe SATA drivers need to be installed during system installation only if SATA drive is the one where you install the system. In my case, this drive will only be used as data drive, so hopefully I can find the right driver and install it now. Pleaes note, that BIOS identifies SATA 1 driver (I temporarely connected another SATA drive that I had). The only problem is, I can not find the driver.... One possible reason could be that my system "windows Server 2003 X86 is not supported"... That would be dissapointing :( I have looked through MSI page as well as VIA support and tried many possible drives (I go into device manager and select SATA driver that is currently with yellow warning sign, right click it and do update, then select the new downloaded driver, but system does not accept it).
I also tried to uninstall existing drive completely, and then do "search for hardware changes". This finds new device and places it not under unidentified devices without driver. It places into SCSI and RAID controllers group and call device something that ends 3149 ... VIA chip used on my board is 8237, so again, kind of weired number that Windows automatically assigns to new device. But again, it does not allow me to change the driver to any of the downloaded ones, saying that it is not newer driver than the one currently installed....

Hotswap sata drives not recognized / partition table not detected

Hello Everybody,
I'm having some trouble, recently I bought to hot swap drive bays and moved two of my hardrives into them, but I can't seem to recognize the drives unless I boot with them in the "on" position, if I turn them on later, there's no indication that they are recognized at all by the system (by this I mean that there doesn't seem to be any new sd* or hd* devices appearing in /dev)
If I reboot with the drives configure in the "on" position, then arch recognizes them, but it can't read the partition table on one of the drives; it just shows up as, e.g /dev/sda and I don't see /dev/sda1; the drive has a single partition formatted with xfs (yes I've got xfsprogs installed), and I can recognize it if I boot into Parted Magic 3.5. I wonder if it's becuase I have BSD partition table? Anway, this isn't a huge issue, becuase I'm just going to transfer the data onto an external usb drive, reformat and transfer the data back.
I really do want to figure out a solution to the hotswapping problem though, because I don't want to have reboot if I want to hotswap the drives; this completely defeats the purpose of having hot-swappable drives.
Thanks for any help you can give,
-Pseudonomous
Edit 1: Potentially useful data:
I've got an ATI SB700/SB800 sata controller according to lspci
Edit 2:
I cannot for the life of me figure out how to contact AMD for tech-support, they provide no information on these Sata controllers, I have, however, contacted my motherboard's manufacturer. If anybody knows how to get in touch with AMD/ATI support, that would also probably be helpful.
Last edited by pseudonomous (2009-09-18 00:56:28)

I think I've got it working now; thanks for everyone's help.
There was in fact some BIOS settings that I needed to change hidden under "southbridge configuration". I needed to enable AHCI and disable "SATA / IDE combined controller" or something like that.
I'm also having some trouble with my fstab setup since the hotswap sata drives are in a raid1 array, and the system doesn't like it when I boot without it present; I'll see if I can figure out a way around that; if not it probably belongs in another thread, anyway,.
Again, thanks for your help!

SATA drives not being detected - K8N Neo4 Platinum

I have the same problem, different PSU!
msi k8n neo4 platinum pcb 1.0
3000 64 939
corsair 1gb dual channel ddr400
nvidia 8800gts
antec truepower 550 (19a @ 12v)
used to run 2 ide maxtor 120 and 80
added in a sata dvd writer, worked for 6 months
added in a sata 1TB seagate 7200, sata fails a majority of the time
same symptons now persist as in original post.
:< either bios detects both sata drives, neither, or it crashes. this happens respectively rarely, uncommon, and most common
what ive tried:
updated all mainboard, bios, video drivers to the most up to date (i had to in order for bios to detect the full size of the 1TB)
no ide, same problems
only 1 sata, with and without ide, same problems
the sata only works after a long period of time (or randomly), that i dont use it
(ive had both sata unplugged for 12 hours, booted up this morning with them and it detected, i selected safe mode boot, after making it through a majority of the load, it crashed)
testing a new psu in a day or so, much more powerful. ill give you all my results.

The cables aren't overly bent?
"...worked for 6 months"
"...fails a majority of the time"
Not very relevant, but since i found the FAQs, and there are no less than four FAQs for hard disks http://global.msi.com.tw/index.php?func=prodfaq&maincat_no=1&cat2_no=&cat3_no=&prod_no=165#menu :
"Silicon Image Si3114R Raid bios doesn't have JBOD setting in it, why?
In the new Silicon Image BIOS, JBOD already been renamed as "Concatenation".
If you want to use single SATA HDD or when tou want use each SATA HDD as IDE mode, you can choose "Concatenation" function in Silicon RAID BIOS."
"I am using a SATA hard drive with NCQ technology on this motherboard and I am experiencing problems. How do I fix it?
The issue depends on the Southbridge chipset. Nvidia is currently working on an updated nForce driver to address the issues with certain hard drives.
You could contact Nvidia support to ask for the new driver if there is one. If there is not any new driver to solve the issue, please disable NCQ on your system." /My fattening. /

External Drive not supported, cant burn CDs, after 10.5.8 update

After having spent just about a month sorting out one massive irritation I now get another one.
My internal drive is not working, (disc stuck inside and I gave up on it almost a year ago. Please don't give any advice on how to get it out, it's a goner OK - not worth the fuss nor the $).
So I bought an external La Cie burner which has worked fine on 10.5.7 for well, almost a year. Since I updated yesterday to 10.5.8 i get a Finder burn message saying the drive is not supported.
What do I do then? I know this must be really easy (I hope). Thanks in advance

Thanks but there is no latest update. The Firmware is vLA00, current.
So what is going on? Why do they do 'up'dates when it's just a downdate fps....
OK rant over. What do I do now? How can I get back to 10.5.7? Should I even'
Help! Thanx in advance.
Oh, by the way. In System Profiler's > disc burning > burn support column it says it does have support
(Generic Drive Support). So why does it say it doesn't support the drive when i try to use it?
Message was edited by: Paul Quemades

Flash Drive not supported

Hello everyone,
I purchased a SanDisk Cruzer Micro 1.0 GB flash drive not too long ago and it was working fine. Removed some software that was on it because I couldn't use it.
Used my flash drive today and I receive this error, but still kinda works...
"The disc could not be used because the disc drive is not supported. (Error code 0x80020025)"
The flash drive also does not eject the flash drive correctly. The little light that is on the flash drive does not turn off when I press the eject button in the OS hard drive icon.
I've tried reformating the flash drive and tried downloading the driver on the sandisk website, but it is for the Windows 98SE Operating System and does nothing for my iBook G4.
Any suggestion would be much appreciated.
Thanks,
Stephanie
iBook G4 Mac OS X (10.3.4)

Someone on another forum had a similar issue. Basically, you need to connect it to a Windows machine and uninstall the U3 software from it.
The error message you get indicates that the computer is trying to access the flash drive as if it was a CD writer.
(13744)

My USB Stick(Thumb Drive) not Supported and Anothe...

I have 8Gig Patriot Thumb drive. I used OTG USB cable to connect it to my N8 but phone says USB Device is not supported. ALso When I try to connect my Iomega External Hard drive I get the same error. Can this be possible? Cause patriot and iomega is very well known company in hard drive and thumb drive. I would be very surprise if N8 doesn't support their products.
So can anyone confirmed for me that those companies simply not supported in N8 or I am getting at error which I am not suppose to.
Also there is one more thing, I usually have around 8.9gig left in internal memory. Whenever I try to move 6 gig Mkv files to internal drive I am keep getting error that there isn't enough memory left. Then I tried with my 16gig microsd card. It had 14.9 gig memory left and I tried to copy 6.9 gig Mkv file to microsd card. I got the same error. So can any help please?
Thanks

rajnikant90 wrote:
Also there is one more thing, I usually have around 8.9gig left in internal memory. Whenever I try to move 6 gig Mkv files to internal drive I am keep getting error that there isn't enough memory left. Then I tried with my 16gig microsd card. It had 14.9 gig memory left and I tried to copy 6.9 gig Mkv file to microsd card. I got the same error. So can any help please?
Not a computer engineer but isn't this like using a PC with less than 10% free space, it all becomes unworkable. For internal memory doesn't it have to allocate 6GB first leaving it less than 3GB to actually carry out the task?
Happy to have helped forum with a Support Ratio = 42.5

External SATA drive not mounting

I have now been on the phone 3x witht eh clowns at OWC, who btw, do not know their product because they gave me the wrong advice twice. I'm now on hold for a third time. I thought you guys might be faster.
I bought a OWC mercury elite dual drive enclosure. eSATA connectors. I moved an internal SATA drive into it to be external.
I bought a Seri-Tek1SE2 card. My pci-x slots are supposed to work with this PCI card. It is recognized in the apple profiler.
The problem, the disk doesn't mount on the computer. The machine is on. Seems to work, but can't find it in profiler or disk utilities.
Please help me troubleshoot, someone, PLEASE!!!!!
thanks!

ZAP PRAM or better yet, boot into Open Firmware and
reset-nvram.
Done. Even reset the PMU
Ordered a new SeriTek/1VE4 card that should arrive on Tuesday.
You don't say what drives you are using. Some or not
all work well.
Western Digital. Only one drive.

Setting transaction isolation upon enlistment for XA driver not supported !!?!!?

Hi !
I've been developping a simple webapplication with a few Entity CMP EJB, Struts
and some JSP.
I registred a Pointbase XA JDBC driver in Weblogic 8.1.
When I want to create a new post in the database via one of my EJB, I get "Due
to vendor limitations, setting transaction isolation upon enlistment for "Pointbase
XA" JDBC XA driver is not supported".
What do I have to add in my xml files to make it work ?
Something with <transaction-isolation> in the weblogic-ejb-jar.xml ?
I'll appreciate some help here...
Extract of my code (CustomerEditAction.java):
<<
CustomerHomeLocal chome = (CustomerHomeLocal) Locator.getHome("CustomerHomeLocal");
prop = chome.create(cform.getName(), cform.getAddress(), cform.getZipcode(), cform.getCity(),cform.getCountry(),
cform.getEmail(), cform.getPhone(), cform.getHomepage());
And the error message and stack is:
<<
javax.ejb.TransactionRolledbackLocalException: EJB Exception:; nested exception
is: javax.ejb.EJBException: nested exception is: java.sql.SQLException: XA error:
XAER_RMERR : A resource manager error has occured in the transaction branch start()
failed on resource 'CaciPool - Pointbase - XA': XAER_RMERR : A resource manager
error has occured in the transaction branch javax.transaction.xa.XAException:
start failed for XAResource 'CaciPool - Pointbase - XA': Due to vendor limitations,
setting transaction isolation upon enlistment for "PointBase XA" JDBC XA driver
is not supported. at weblogic.jdbc.wrapper.XA.createException(XA.java:104) at
weblogic.jdbc.jta.DataSource.start(DataSource.java:631) at weblogic.transaction.internal.XAServerResourceInfo.start(XAServerResourceInfo.java:1069)
at weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerResourceInfo.java:1001)
at weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerResourceInfo.java:203)
at weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTransactionImpl.java:419)
at weblogic.jdbc.jta.DataSource.enlist(DataSource.java:1230) at weblogic.jdbc.jta.DataSource.refreshXAConnAndEnlist(DataSource.java:1193)
at weblogic.jdbc.jta.DataSource.getConnection(DataSource.java:371) at weblogic.jdbc.jta.DataSource.connect(DataSource.java:329)
at weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSource.java:298)
at weblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.getConnection(RDBMSPersistenceManager.java:1841)
at weblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.execGenKeyNamedSequenceTableUpdateAndQuery(RDBMSPersistenceManager.java:2392)
at weblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.getNextGenKeyPreFetch(RDBMSPersistenceManager.java:2174)
at weblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.getNextGenKeyNamedSequenceTable(RDBMSPersistenceManager.java:2147)
at com.caci.ejb.CustomerEJB_6i2zhv__WebLogic_CMP_RDBMS.ejbCreate(CustomerEJB_6i2zhv__WebLogic_CMP_RDBMS.java:5403)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324) at weblogic.ejb20.manager.DBManager.create(DBManager.java:1139)
at weblogic.ejb20.manager.DBManager.localCreate(DBManager.java:1118) at weblogic.ejb20.internal.EntityEJBLocalHome.create(EntityEJBLocalHome.java:171)
at com.caci.ejb.CustomerEJB_6i2zhv_LocalHomeImpl.create(CustomerEJB_6i2zhv_LocalHomeImpl.java:133)
at com.caci.ui.CustomerEditAction.execute(CustomerEditAction.java:58) at
>>
Regards,
Olivier

Hi !
I've been developping a simple webapplication with a few Entity CMP EJB, Struts
and some JSP.
I registred a Pointbase XA JDBC driver in Weblogic 8.1.
When I want to create a new post in the database via one of my EJB, I get "Due
to vendor limitations, setting transaction isolation upon enlistment for "Pointbase
XA" JDBC XA driver is not supported".
What do I have to add in my xml files to make it work ?
Something with <transaction-isolation> in the weblogic-ejb-jar.xml ?
I'll appreciate some help here...
Extract of my code (CustomerEditAction.java):
<<
CustomerHomeLocal chome = (CustomerHomeLocal) Locator.getHome("CustomerHomeLocal");
prop = chome.create(cform.getName(), cform.getAddress(), cform.getZipcode(), cform.getCity(),cform.getCountry(),
cform.getEmail(), cform.getPhone(), cform.getHomepage());
And the error message and stack is:
<<
javax.ejb.TransactionRolledbackLocalException: EJB Exception:; nested exception
is: javax.ejb.EJBException: nested exception is: java.sql.SQLException: XA error:
XAER_RMERR : A resource manager error has occured in the transaction branch start()
failed on resource 'CaciPool - Pointbase - XA': XAER_RMERR : A resource manager
error has occured in the transaction branch javax.transaction.xa.XAException:
start failed for XAResource 'CaciPool - Pointbase - XA': Due to vendor limitations,
setting transaction isolation upon enlistment for "PointBase XA" JDBC XA driver
is not supported. at weblogic.jdbc.wrapper.XA.createException(XA.java:104) at
weblogic.jdbc.jta.DataSource.start(DataSource.java:631) at weblogic.transaction.internal.XAServerResourceInfo.start(XAServerResourceInfo.java:1069)
at weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerResourceInfo.java:1001)
at weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerResourceInfo.java:203)
at weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTransactionImpl.java:419)
at weblogic.jdbc.jta.DataSource.enlist(DataSource.java:1230) at weblogic.jdbc.jta.DataSource.refreshXAConnAndEnlist(DataSource.java:1193)
at weblogic.jdbc.jta.DataSource.getConnection(DataSource.java:371) at weblogic.jdbc.jta.DataSource.connect(DataSource.java:329)
at weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSource.java:298)
at weblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.getConnection(RDBMSPersistenceManager.java:1841)
at weblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.execGenKeyNamedSequenceTableUpdateAndQuery(RDBMSPersistenceManager.java:2392)
at weblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.getNextGenKeyPreFetch(RDBMSPersistenceManager.java:2174)
at weblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.getNextGenKeyNamedSequenceTable(RDBMSPersistenceManager.java:2147)
at com.caci.ejb.CustomerEJB_6i2zhv__WebLogic_CMP_RDBMS.ejbCreate(CustomerEJB_6i2zhv__WebLogic_CMP_RDBMS.java:5403)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324) at weblogic.ejb20.manager.DBManager.create(DBManager.java:1139)
at weblogic.ejb20.manager.DBManager.localCreate(DBManager.java:1118) at weblogic.ejb20.internal.EntityEJBLocalHome.create(EntityEJBLocalHome.java:171)
at com.caci.ejb.CustomerEJB_6i2zhv_LocalHomeImpl.create(CustomerEJB_6i2zhv_LocalHomeImpl.java:133)
at com.caci.ui.CustomerEditAction.execute(CustomerEditAction.java:58) at
>>
Regards,
Olivier

HFS drive not supported

I have just downloaded CS2 illustrator for Mac to replace my windows version but message says that it can't be installed onto HFS drive as not supported what does this mean and how do I rectify this?

https://www.adobe.com/cfusion/entitlement/index.cfm?e=cs2_downloads
Adobe no longer supports AI CS2.
HFS (not plus, or +, or OS X Extended) is also a very old system format. HFS was introcuced in early 1998. Thanks, Wikipedia. :+)

Urgent - No 64bit Promise SATA driver (not RAID)

I'd already installed XP64 on an old PATA drive without problems, so today I decided to use the new VIA SATA drive to dual-boot it off my SATA drive, along with my main XP32 installation. Unfortunately, although it found the VIA driver at F6 and got to the GUI install it locked solid at Devices. Worse than that it's totally screwed all the boot files so I now can't get to anything on either the SATA or PATA drives, and blue screen on any attempt to boot either drive. That's 4 OS installs gone.
I moved the SATA over to the Promise controller thinking I'd seen 64bit Promise drivers for weeks, but it seems these are only RAID drivers and are called "Promise FastTrak 378 (tm) Controller". Needless to say they don't find a single SATA drive. What I need would be the driver called "Promise SATA378 (tm) Controller" but I can't find it. Have Promise really released a RAID driver but no single SATA driver for the same controller???
If I don't find it I guess I'm looking at 4 days spent formatting and reinstalling.

Hi Jocko
OK, I'll try explain (and remember!)
First I installed XP32 on the lone SATA drive. No problem as it was the only drive.
Then I added an old PATA drive, which BIOS and Windows Setup always sees as Disk 0 and the SATA as Disk 1.
I then installed XP32 onto the PATA drive. No problem, I think it was because Windows saw it as Disk 0 as it put the MBR in the right place.
I then put Server64 and XP64 on the PATA drive to test them (leaving by day-to-day install safe on the SATA drive. Again, no problems, it updated the MBR correctly to let me multiboot between the 3 OSes on the PATA drive.
I then tried to add an install of XP64 to the SATA drive, but because I left the PATA drive connected, Windows setup updated the MBR of the PATA drive instead. On subsequent reboot it failed because it was pointing to the wrong drive (I think). So I had half an install on the SATA drive, and a boot.ini on the PATA which pointed to a non-existent half installation. Even with BIOS listing the SATA drive as the boot device, each time the PC restarted it tried to carry on the installation and of course failed.
That's when I had to refer to my book on Recovery Console...
So it seems that if multiple drives are installed, it will update the MBR on the lowest ID drive, which is not necessarily the drive the installation is actually going on to! I think!

Driver not support createStatement(int resultSetType, int resultSetConcurrency)

I am using Weblogic 5.1 for development and would like to use resultset for
updating
when I call 'createStatement(int resultSetType, int resultSetConcurrency)'
Error message prompt out that the driver does not support such method
I am using weblogic.jdbc20.oci.Driver & weblogic.jdbc.mssqlserver4.Driver
for testing
Can some body help me
regards,
Fannie

Right, this method is not implemented by weblogic driver. You should get a
message like,
"This JDBC 2.0 method is not implemented" from
weblogic.jdbc20.oci.Connection or weblogic.jdbc20.mssqlserver4.TdsConnection
"Fannie" <[email protected]> wrote in message
news:3b563e73$[email protected]..
I am using Weblogic 5.1 for development and would like to use resultsetfor
updating
when I call 'createStatement(int resultSetType, int resultSetConcurrency)'
Error message prompt out that the driver does not support such method
I am using weblogic.jdbc20.oci.Driver & weblogic.jdbc.mssqlserver4.Driver
for testing
Can some body help me
regards,
Fannie

P35 Neo 2 Fr - SATA drives not supported ?!?

Similar Messages

Maybe you are looking for