P35 Neo2-FR with e8400 Got 4.3ghz, but not 4.5ghz HELP!

I got an e8400 with my neo2-fr board.
I achieved 4.3ghz stable, but I cannot seem to get 4.5ghz no matter what I try.
I have a picture of my Cell menu: http://www.xtremesystems.org/forums/showthread.php?p=2807948#post2807948
Here are my Specs:
Case: Antec Nine Hundred
RAM: OCZ 6400 Platinum [email protected]
PSU: OCZ Powerstream 520w [email protected]
I'll link the picture to my cell menu soon.
Has anyone reached 4.5ghz with this board? If so, What cell menu options did you use?
THANKS.
ALSO:
I'm noticing a massive vdroop from 1.52 down to 1.48 on cpu load. Does this have anything to do with the bios? I'm using version 1.8
Because when i used this board with my allendale e6300 b2 revision, I kept the bios at 1.1 because any other version resulted in mad vdroop...
What do you guys think?
UPDATE: Changed FSB overclocking jumpers from default 200mhz to 333mhz with no result.

Great stuff Slug 4.4Ghz is quite and achievement
I mentioned PSU as it something people would not consider to be a weak point.
I am big fan of single +12V rail PSU's with lots of amps.
If your components are struggling to draw power they will have to work harder and create a higher temperature. At the same time if psu is hitting max power it able to supply........ (Power is amps not wattage)...... then you will have similar issues......
Corsair TX 750 is great for OC work and tested here.  The other psu I would like to test is P&C 750.......
You could also test, by taking off extra components, like optical drives, usb devices etc.....
If you had just, graphics, memory 1 stick, hard drive, mainboard & cpu with all onboard devices disabled. Can you hit 4.5Ghz stable?

Similar Messages

  • After upgrading to iOS 5, my iPhone 4 takes a very long time to open digitally signed emails. I've tried with the SMIME settings enabled, but that doesn't help either. Any ideas on how to resolve this?  Thanks in advance.

    After upgrading to iOS 5, my iPhone 4 takes a very long time to open digitally signed emails. I've tried with the SMIME settings enabled, but that doesn't help either. Any ideas on how to resolve this?  Thanks in advance.

    I suspect you may have a corrupt photo or image that is causing the sync to fail or quit. You might want to try removing all of your photos by deselecting them in iTunes then sync - and try adding them by each sub-folders until you are able to nail down which sub-folder of photos, that causes the sync to stop or gives you errors.

  • Hi! I have a library of around 1000 songs on my iTunes, I recently synced my phone and all was lost, my partner has the same songs on hers with a different sign in, but not backed up anywhere, any suggestion on how I can store her tunes in my account ???

    Hi! I have a library of around 1000 songs on my iTunes, I recently synced my phone and all was lost, my partner has the same songs on hers with a different sign in, but not backed up anywhere, any suggestion on how I can store her tunes in my account ??? Then sync them to mine? When I sign her phone into her account I get a message warning that if I sync the dogs on her phone will be replaced by the ones in the library! But as there are no songs there I'm reluctant to continue!!! Please help this non techi guy.!!!!!

    Hello Solid Buck,
    Thank you so much for providing the details about the duplicate song issue you are experiencing.  It sounds like you would like to remove the duplicate songs that will not play on your iPhone, but when you connect it to iTunes, iTunes only shows you one copy of the song on your iPhone. 
    In this situation, I recommend deleting the individual songs that do not play directly from your iPhone.  I found the steps to do this on page 61 of the iPhone User Guide (http://manuals.info.apple.com/en_US/iphone_user_guide.pdf):
    Delete a song from iPhone: In Songs, swipe the song, then tap Delete.
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Unable to open PDF files with Adobe Reader, Mac trying to open files with Quicktime instead, but not succeeding. HELP!

    Unable to open PDF files with Adobe Reader, Mac trying to open files with QuickTime instead, but not succeeding. HELP!

    Hi BDAqua,
    Thanks for the info, I dragged a PDF to desktop ctrl-, get info. change all to open with adobe.
    Problem solved, many thanks for a quick response.
    Barry69

  • My ipod touch only connects via wifi, not via cable. The cable works with my iPad, so it's not that.  Help?

    My ipod touch (4th G) only connects via wifi, not via cable. The cable works with my iPad, so it's not that.  Help?

    1. Turn the router, iPad and printer off.
    2. Turn on the router and then wait 30 seconds to let it complete its start-up process.
    3. Turn on printer and then wait 30 seconds to let it complete its start-up process.
    4. Turn on your iPad and test print.

  • Hi, I have a Indesign user who inherited a PC with Indesign installed. Indesign works with old PC user profile but not the new user. Any ideas how I can resolve this?

    Hi, I have a Indesign user who inherited a PC with Indesign installed. Indesign works with old PC user profile but not the new user. Any ideas how I can resolve this?

    Question # 1 is what do you mean by "inherited"? Is this a case where the computer belonged to someone else? Your user would not be entitled to use a program licensed to someone else.

  • How can I share my music and some apps with my children's devices, but not share iMessage

    How can I share my music and some apps with my children's devices, but not share iMessage

    Then only set up your account in "Settings > iTunes & App Stores" and don't give them your password .

  • I recently purchased a MacBook Air and was told by Apple that Keynote and Pages were compatible with MS Applications.. I have since tried to open a Powerpoint Presentation but it comes up with an error message and is not right. Help!

    I recently purchased a MacBook Air and was told by Apple that Keynote and Pages were compatible with MS Applications.. I have since tried to open a Powerpoint Presentation but it comes up with an error message and is not right. Help!

    If there are fonts, transitions, builds, video or audio in the PowerPoint file that are not compatible with Keynote, it will either prevent the presentation opening or Keynote will substitute the settings causing playback changes.
    I use Open Office to play and open any PowerPoint files sent to me, they play exactly as in PowerPoint.
    Open Office is free, you can download it here:
    Open Office for Mac

  • Msi p35 neo2 fr with P4 D 915 and Geil ultra ddr2 2Gb 1066Mhz

    Hello! I`m new to this forum and just got my new MB p35 neo2 FR and 2 G of ram and i would like to know the best settings for this configuration. I have a pentium D 915, 7300GT sonic 256 ddr3, 2 G ddr2 1066mhz from geil. And PSU from Alied with 400W real power. If someone could guide me to best OC setting?

    Look here:
    http://global.msi.com.tw/index.php?func=techexpressdesc2&express_no=52&page=1
    http://global.msi.com.tw/index.php?func=techexpressdesc2&express_no=78&page=1

  • MSI P35 Neo2-FR with Quad 8300/8400 ?

    Hello All,
    could you please inform me if my motherboard P35 Neo2-FR will be compatible with INTEL Core2 Quad Q8300 or Q8400? If not what would be the best CPU for this motherboard.
    I do not want to through away money.
    Thank you very much.

     Q8300 should with BIOS 1.9 & Q8400 with BIOS 1.A (1.10)
     CPU support page for that MB is 4 years out of date though so it doesn't show them.
     Update BIOS to latest and you should be able to use either one of them.
    http://www.msi.com/product/mb/P35-Neo2-FR---FIR.html#/?div=BIOS
              >> Use the MSI HQ Forum USB flasher <<
    Edit:
     This is usually good website to check though I can't say it's 100% correct all of the time but I use it for reference on occasion as most of the time it's OK.
      http://www.cpu-upgrade.com/mb-MSI/P35_Neo2-FR___FIR.html

  • Using code interface node with dll crashes LV 2011 but not LV 8.6... using max error handling does nothing

    Hi all,
    I'm having a peculiar problem.
    I inherited a project saved in LabVIEW 8.6. The project must use of particular dll that was built a few years ago. The original developer and source code for this .dll are long gone. The very core logic exists, in the form of embedded C code, and that's it. The .dll is called through a Code Interface Node in LV 8.6 and this setup manages to "work". Howver, running the VI that calls this .dll in LV 2011 causes an "insta crash", as in, no "program has stopped responding".  Error message pops up, then all LV windows close.
    It's very similar to that described in here:
    http://digital.ni.com/public.nsf/allkb/D84C9775ABD921CF8625772A005CA50C
    but this KB says to try putting the amount of error handling to maximum. I tried that, but it didn't help. 
    Using the "Debug" option allows me to run the just-in-time debugger with CVI 2010, which then proceeds to say this:
    Finally, I manage to get this out of it: 
    FATAL RUN-TIME ERROR:   Unknown source position, thread id 0x000012D4:   A non-debuggable thread caused a 'General Protection' fault at address 0x00000000.
    I don't think that really helps at all, but it's there.
    Here is the function prototype of the .dll:
    void  _inputPM@224(uint8_t arg1, uint16_t arg2, uint8_t arg3, float arg4, float arg5, float arg6, float arg7, float arg8, float arg9, float arg10, float arg11, float arg12, float arg13, float arg14, float arg15, float arg16, float arg17, uint16_t arg18, uint16_t arg19, uint16_t arg20, uint16_t arg21, uint16_t arg22, uint16_t arg23, uint16_t arg24, uint16_t arg25, uint16_t arg26, float arg27, float arg28, float arg29, float arg30, float arg31, float arg32, float arg33, float arg34, float arg35, float arg36, float arg37, float arg38, float arg39, float arg40, float arg41, float arg42, float arg43, float arg44, float arg45, float arg46, float arg47, uint16_t arg48, uint16_t arg49, uint16_t arg50, uint16_t arg51, uint16_t arg52, float arg53, float arg54, float arg55, float arg56);
    (never seen a function take 50 input params like that (wouldn't you use a struct? array? something? But I digress, and I don't know anything about .dlls...))  
    I do have a ".lib" and a ".cdb" file with the same name as the .dll, but those also looks like some kind of compiled file. 
    I'm sure the answer I'm going to get is that there is no way of telling what's really going on without .dll source code. I'm hoping against hope that there may be another way or hack.
    Any ideas? Thank you for you help. 
    Regards,
    Mark G 
    Solved!
    Go to Solution.

    MarkCG wrote:
    Changing the call library node to stdcall (WINAPI) did the trick! No more crash. Thank you very much!
    I haven't run LV2011 on windows XP, only on windows 7, so I don't know if that makes a dfference. But  The call type makes no difference when using LV 8.6 on the same machine, however.
    Now I've got to make the .DLL run corretly on a compact fieldpoint....  and avoid crashing IT. 
    Thank you for the help all!
    Well, the DLL did work fine in LabVIEW 8.6 because earlier versions of LabVIEW automatically proceeded to change the calling convention to stdcall, if they noticed a function name decoration of @# (# = number of bytes passed on the stack) appended to the name. This is the default naming decoration for stdcall functions used by VisualC. However this decoration can be overwritten with linker switches, other compilers don't use them always in the same way, and most likely there are in the mean time compilers out there that can produce such decorations also for non stdcall calling convention. So this automagic trickery was removed from newer LabVIEW versions.
    I do think it could be considered a bug in the code that upgrades LabVIEW VIs, that it uses the calling convention that is configuerd in the dialog, instead of the calling convention earlier LabVIEW versions used automagically, but it is an esoteric corner case.
    What Compact Fieldpoint controller do you have? If it's anything newer than 20xx or 21xx forget it. The 22xx controllers use a PPC CPU and VxWorks operating system and can never get a Windows DLL to operate properly. If it is a 20xx controller it's still highly likely that DLL can not even get loaded into LabVIEW as it likely relies on other runtime libraries and possibly Win32 APIs not present in the Pharlap ETS runtime kernel used on those controllers.
    There is a tool to check a DLL for incompatible imports that are not present on specific ETS RT systems. And this list summarizes the RT system used on the various NI controllers.
    Rolf Kalbermatter
    CIT Engineering Netherlands
    a division of Test & Measurement Solutions

  • My subscribe is end, but i have more dvd with products (Windows 8.1), but not all i wrote my active key

    Hello,
    my subscribe MSDN is ended.
    But i got more dvd (Windows 8) with products, when my subscribe was good.
    How i can active products with my dvd.
    I have some products key, but not all.

    Help
    with managing my MSDN subscription
    Help with MSDN Subscriptions
    S.Sengupta, Windows Entertainment and Connected Home MVP

  • Problems with artwork displaying in iTunes but not on iPod screen

    I have iTunes (7.6) and a 5th gen, 80GB, firmware 1.2.3 iPod.
    Not infrequently, I find that a song's artwork is visible in iTunes, but not on the iPod itself. Sometimes the artwork is displayed simply as a black rectangle on the iPod.
    The converse situation also sometimes happens - when album info is retrieved from the CDDB, sometimes album artwork is also retrieved - but this is not displayed in the iTunes software, only on the iPod.
    And yes, the "Display album artwork on your iPod" checkbox is selected in iTunes.
    Does anyone have any more info about this?
    Are there any restrictions on image file formats? Maximum size? Type? Interlaced or not?
    Last time I asked this question I got zero response
    It is an irritating problem, cos there's no way to check what the artwork looks like on the iPod without disconnecting it from my PC :/

    OK to drag this thread back on topic:
    I think the "sync" thing is irrelevant anyways.
    What I tried in the end was viewing my iPod in iTunes,
    navigating through to the check box for "display album artwork",
    UNcheck it, and click apply.
    At this point, iTunes said, with NO confirmation "Are you sure?" dialog, "DELETING ARTWORK ON iPOD" !! :-O I was not pleased
    However I then re-selected the "display album artwork" box and clicked Apply. The process took about 10 minutes to complete.
    When I then disconnected the iPod, the black squares were gone, and the artwork was NOT deleted (phew!) and was displaying correctly. I was pleased
    The amount of "other" megabytes on the display in iTunes for my iPod's contents had shrunk.
    I dunno what all this actually did - are the artwork files embedded in the MP4 files on the iPod? Or are they stored seperately and linked to them?
    I'm wondering if the "black square" thing is caused by an MP4 having an embedded image, and there also being a conflicting image file elsewhere on the hard drive? But this is just guessing.

  • ICloud will sync with iCal & contacts on Mac but not iPhone or iPad

    I just got a new iMac and set up my calendar and contacts, essentially entering everything from my old exchange server (going away from the PC).  My iCloud syncs with the Mac, but every time I try with the iPhone or iPad it constantly is "searching" for the calendar and contacts, draining battery life.  I have spent the last two days doing hard resets, wiping clean and doing a system restore for my iPhone and iPad (very frustrating!!) and doing both a system recovery AND installing everything manually.  It is worth noting that iCloud worked on my iPhone and iPad BEFORE I set it up with the iMac and software is all up to date.  I have also deleted the iCal, exported a copy and rebooted the reset up the iCloud account.  Things always seem to work with the Mac, but not the mobile devices.  Will apple care even be able to help?  This is really frustrating as I have no contacts on my phone....

    OKAY FOLKS, I found the answer.  I figured the only explination could be with my iCloud Account.  I tried EVERYTHING, read every discussion on this topic.  It WASN'T b/c I had an old Mobile Me account.  It WASN'T b/c I didn't have the sttings right.  I rebooted, erased data, EVERYTHING.  The only solution was to create a NEW iCloud account - I chose a new address through Apple (me.com).  Even though I already have a me.com email address and a different Apple ID I figured starting fresh was the only way.  Sadly, I lost all of my calendar data (when I tried to import my old calendar data from a backup it was associated with the old iCloud account and could not be edited) but my contacts were saved.  I just re-entered my calendar information... figured this would be less time consuming than trying to reboot and research the issue 10 more hours!
    Here are the steps I used:
    1- iCloud was OFF on my iPhone to start
    2- Export your iCal and iContacts data from your Mac to a backup (you WILL lose your data)
    3- On iPhone went to Settings, iCloud and went through the proper steps to set up a new iCloud account with a NEW email address (me.com)
    4- On iMac under System Preferences I deleted my OLD iCloud account (it will prompt you stating you will lose your data or you can merge/save).  The only way I could get it to work was to accept the warning it was going to delete everything
    5- Set up a NEW iCloud account on my Mac with the NEW me.com account I set up on my iPhone.  Somehow my Contacts were kept in tact, uploaded to iCloud and to my iPhone.  Had issues with my iCal data, but I entered all the information manually.
    Everything is syncing great!  Haven't set this up yet on my iPad but will do that next.  I'm hopeful!!

  • I have an iphone 4s and the text i send to a friend with a galaxy 4s he is not receiving any help?

    i have an Iphone 4S and the text i send to a friend with a galaxy 4s he is not receiving. Any help?

    Then it's sending as SMS and not iMessage (that's good) so deleting the contact probably didn't help. It also seems iMessage isn't redirecting his texts as he's not used and apple device on the account previously. Can he receive a picture message from you instead? Does he receive texts from other  apple devices? (iPhones,pods/pads) try sending a text through Verizon online using your account on a web browser. If it is also blocked then it confirms the issue is with his device, well at least points you there rather than guessing if it's yours or his or both. There's some ideas, let me know- Joe
    Sent from my iPhone

Maybe you are looking for