P35 Neo2 - OS died, need help restoring RAID after re-install of XP

Question

I have a P35 Neo2 with on-board Intel RAID.  I need a bit of help getting a two drive RAID going again after reinstalling XP.
Here's my situation:
Same hardware, MB, etc. I originally set up the system with a 20gb IDE and two 320gb SATA drives. I put the OS on the 20gb, and set the two 320's up as a RAID. I partitioned the 320's into 200gb + 120gb sections on each drive. The 200gb partitions were mirrored between the two drives, and the remaining 120gb on each drive was used as non-RAID storage space.
I picked up a nasty virus-spyware a month or two ago that I was struggling to find a fix for when the OS began to BSOD. I put the 20gb IDE to the side, and put a 40gb IDE in it's place. I re-installed XP on it last night, and now need to get the RAID up and running again.
I went into Disk Management and it showed three dynamic drives with a yellow triangle icon and labeled 'foreign'. I right clicked and found an option to 'import'. I clicked on import and a window popped up showing all of the partitions and logical drives I had previously created on the two drive RAID. I figured I was in business, so I clicked OK.
Disk Management now shows one dynamic disk as 'Online', but still shows two as 'Foreign'. If I right click on them, and chose import, I get the same window showing my partitions and logical drives, but if I click OK, I get a warning message that: "Some of the volumes you are importing will lose data because you have not moved all of your disks to the system."
I'm in over my head at this point, so any help would be appreciated.
Thanks,
GeoD

Answer 1

A 200gb partition is restored, but the 120gb is not, which is confusing. ALso, when I look at the logical drives in the partition, I'm beginning to think I had the 200gb mirror /120 gb storage backwards. The data restored is not something I would be concerned with losing. It's installed applications, and multimedia files that I could lose without worry.
There is also 70gb dynamic drive labeled Missing.  I know I left a small portion of all three of the drives unallocated as a reserve, so that must be what this is. It's like the RAID info is incomplete which leads me to the next piece of info.
Something I didn't initially mention for the sake of brevity, was when I right-clicked on 'Import Disk' the applet noted the disk was 3/3. I assumed that meant disk 3 of 3 disks. I've since begun to wonder if I imported the disks in the wrong order. ie) I should have imported disk 1/3 first.
Do you know how to clear out Disk Mgt's info, so I can start over?
I also noticed only one of the 320 SATA's shows up in Device Mgr, (DM). What I found both confused me and encouraged me.
When I created the array, I named the the drives RAID0 and RAID1. They both show up in DM. But only one of them shows up as the drive model: WDC WD3201ABYS-01B9A0. There should be two of them.
The OS knows there should be a RAID, but for some reason only one of the drives show up as hardware.  I rebooted and checked the data and power supply cables, (connected), the BIOS, (both drives show up) and both drives show up in Disk Mgt.  Just not in DM.
Does that mean the HD has died?
Part of my difficulty is I had a brain injury in 2001, followed by another in 2003. The 2nd injury caused 6 months of what the docs call it a walking coma - I walked and talked, but have no memory of the time.
When I 'woke up' in the Fall of 2003, I found I had lost considerable cognitive function and other problems.  These problem have ended up disabling me, (I'm now on SS Disability).
Until then I had been a 'System Admin' for micro-businesses, (max - 15 computers). I built systems and servers, installed networks, maintained them and did all the support. Basically I was these company's Sys Admin on an as-needed basis.
One thing I lost was the ability to troubleshoot and repair hardware. Combined with other cognitive problems, I was forced into closing my business. At the time, I was maintaining close to fifty offices; ~20 had Peer-to-Peer networks & ~20 had servers I had built.
What's doubly frustrating is I was just getting ready to sign up with an online backup service when I got hit with a nasty malware/virus that's so new there's no info on the 'net about it. I got entangled in trying to fix it and spaced out the online back up. Now I find myself in a situation where I desperately need to restore the data on these RAID drives.  Because of the memory problems I now have, I completely depend on my computer as an auxiliary 'brain' - I have stuff on these drives that I have to have.
I didn't do much with RAID when I was still in the biz, and this is the first time I've had problems with a RAID of my own, so I'm struggling to figure this stuff out.
Should I be able to install one of these drives by itself so I can get the data from it? The way I understand the theory of RAID is that if one drive dies, you can put another in and the mirrored portion will re-create itself on the new drive.  Couldn't that be a way to get the important data off the drive or drives if they don't want to go back together as a RAID?
I could back each up to the online service and then just rebuild them.  Not my first choice, but it would reduce my stress level if I thought I could do it.
Sorry to go on, but now you can see why I'm both struggling & worried.
Thanks for any info or help.
Later,
GeoD