P35 platinum audio driver failure
Hi
I have just had to reformat my PC. All ok up until trying to install the realtek HD audio driver. I get the message 'install realtek hd audio driver failure' I have not installed SP3
Thanks
Do this:
Go to device manager, then expand "System Devices", and locate "MS UAA bus" Right click over it, then click "Disable".
Reboot the notebook and enter in "Safe Mode", {hit "F8" just after bios post screen}
Once done go to device manager then expand "System Devices", and locate "MS UAA bus" Right click over it, then click "Un-install".
Reboot PC, then run Realtek driver installation again.
Similar Messages
-
I am not getting any audio. Windows XP "Sound and Audio Devices" says there is "No Audio Device". When I try to install the Realtek HD Audio Driver I get the following error message "Install Realtek HD Audio Driver Failure !!". Can anyone help me get audio out my earphones?
Read Moan Guide 1st.
Follow tips here: https://forum-en.msi.com/index.php?topic=113078.msg846427#msg846427 -
P6N SLI Platinum, audio driver update gives "No Driver was supported..."
I have the audio driver from the CD that came with the mobo, but I wanted to update it to the new version. Currently I have R1.67 2.32, I tried to install the driver (R1.83 2.51) from http://global.msi.com.tw/index.php?func=downloaddetail&type=driver&maincat_no=1&prod_no=1140 but get the message "No Driver was supported in this driver package".
Also, I went to the Realtek site and got their even newer driver R1.84 but it asked me to remove the previous driver first, I'd rather check with the boards first to see what is going on.
P6N SLI Platinum
BIOS 1.4
Realtek Audio onboardCould you please point me to where I can locate Live BIOS, first I hear of it. Thanks for the input btw.
Another off topic question. Does the Dual Core Center work ok with Vista x64? Wondering just in case before I get to using it. On my first Vista install is seemed to work, 2nd format it would come up with 2 error messages and not start:
"Error! unable to load ntuneoem.dll" and "Failed to load overclocking driver! This program must run as an administrator."
I have ntune installed on my 2nd format (which I found out doesn't work in Vista 64 properly) but cannot uninstall it from Add/Remove. A wizard window comes up and closes in the same seconds when I click uninstall. Tried to uninstall using the MSI CD which with I loaded it, still gives an error (tried to google the error msg but the msg is extremely rare and doesn't point to the problem). Going to have to manually remove it it seems and hope I get it all. -
Satellite U400-108 - Audio driver failure on Win7
Hi,
As the title says, I've been trying to install the Audio driver on Windows 7 beta build 7000 but to no avail. I actualy wasn't going to bother as the drivers that came with Win7 were working fine until today when my headphone jack stopped working for no reason. Was working fine a few days ago, but today, no go. Keeps saying they're not plugged in when they are.
Tried half a dozen different drivers but none are working.
So, I either need information on what driver might work on Win7 or why my headphone jack stopped working. Any ideas?
Cheers,
Ex.Hello
I dont know why this happened but Windows 7 is only a beta operating system and such errors/problems are normal.
So try to find an other driver for the sound card or the devices. Search on the manufactures website from the driver or try to use driver from Vista.
In your case I would install Windows Vista or XP to work without problems.
Greets -
Cannot install Realtek HD Audio driver! HELP!
Hi Everyone,
I'm running into a big problem with my Realtek HD Audio setup. After windows installation, it's got the typical Legacy codecs etc and "Audio Device on High Definition Audio Bus" with a yellow exclamation mark. None of them has any drivers associated with it. Funny thing is, I cannot uninstall any one of them. All the Leagcy stuff has no uninstall option, the High Definition Audio Bus does have an uninstall option, but it does absolutely nothing. Install new driver, it won't allow that either. Clicking on them does nothing.
I got the latest setup driver from Realtek and tried to run it, it gives me the "Install Realtek HD Audio Driver Failure" everytime. And I have already installed the UAA. (KB888111)
Finally I found a way to uninstall all of the Legacy codecs etc except the Auido Device on HD thing. Restarted the computer hoping windows will try to reinstall, nope, cannot find anything. So now I'm left with only the Audio Device on HD Audio Bus.
When I disable the HD Audio from the BIOS, it leaves me with no Sound, Video, and Game Controllers. So it only shows up when I enable it in the BIOS, and yet I cannot install a new driver or uninstall it, though I can "disable" it . I can also get into Properties and there is no drivers. Please help!
MSI P35 Neo2-FR BIOS 1.6
C2Q Q6600
2x320 Maxtor in Raid 0
eVGA GeForce 8600GTS 512MB
Corsair XMS2 with DHS 2x1GB
Windows XP w/SP2
Hope I'm not missing any info. Thanks!
Frankjust thought i would add my experience to this thread on th eoff chance that it saves someone the headache i've just been through. Admittedly though it was my own lack of thinking (aka 'beer') that was the problem in the end.
So...
I decided to do fresh install of XP +SP3
All went smoothly except i could not get HD sound. Looking on google and this forum it seemed there was some problem with SP3 and the realtek HD drivers, so i spent ages playing around install and uninstalling the audio drivers in different orders to try and get the damn sound to come out through my HD TV. Normal sound through the stereo jack was working, just not the sound through the HDMI cable into my TV. (YOu might have already guessed now what silly mistake i was making). I also found an audio device in Device manager that i could not find any drivers for.
Anyway, the answer was that the device i needed was the nought to do with my MSI motherboard, but the audio output that goes through the HDMI cable on my gfx card. I can't believe i spent so long trying to get HD sound and all i needed to do was update the mysterious audio device with ATI drivers (which windows could do automatically once i'd installed the ATI gfx drivers). Serves me right for trying to do a fresh install after a belly full of beer. idiot.
All working fine now. -
K9A Platinum audio drivers won't install
I am trying to install the audio drivers for my K9A Platinum off of the cd that came with it and it gets about halfway through and the it says "Install Realtek HD Audio Driver Failure !!" Does anyone know what I could do?
Well, check all things already mentioned...
- Bios: onboard sound enabled?
- clean Windows install;
- also, you can try the native drivers (not from MSI-website, but from Realtek's)
@Fredrik: I'm not going to spend time trying to understand Windows. XP is pretty good, but it still can be as stupid as possible... No use digging up the causes, there are too many possibilities that can cause the problems. Also, keep in mind that far most of the people don't get these problems. It looks like everyone has this problem, but that is because this is a tech support forum... people don't get in here to tell us that soemthing is working all right. -
Realtek HD Audio Driver Not Completing install - error message
Could I just say first that I am far from being technical minded so please allow for possible lapses in info.
Just done another complete reinstall of Win XP - formatted drive etc.
However unlike on previous instances the Realtek HD Audio driver has not installed.
I have downloaded the latest version - 5.10.0.5605 but this too at very near the end of installation gives the message Install Realtek HD Audio Driver Failure [Error Code 0xE0000227]
I have the G33M Series MS-7357(v1.X) Mainboard with Intel Core 2 Duo
Hope this is enough info to anyone to offer advice.
Thanks
Johnhttps://forum-en.msi.com/index.php?topic=115476.0
-
P35 Platimum Combo - Realtek High Definition Audio Driver problam !
o.k.
so i have a P35 Platimum Combo - i just downloded from the site the new "Realtek High Definition Audio Driver"
this is where i downloaded it from,
http://global.msi.com.tw/index.php?func=downloaddetail&type=driver&maincat_no=1&prod_no=1250
so the source is o.k
now after i run "Setup" and starting to install, i press "Next" for the first time, and i reacive the fallowing massage
"No Driver was Supported in this driver package"
then i can jst press "Ok". and the setup windows closes..
anyone know's why ???
p.s - sorry for the englishe...o.k.
i went to the link you gave me. and i downloded the Fix.
now.. when i extract the fix. i got 4 files,
KB835221, kb888111xpsp1, kb888111xpsp2, KB901105x64-ENU
now. all of these files refer to windows xp - and as i said erlier, i have windows vista.
anyway - i installed the first one.. what lookt the the right one. and after installing the patch, i receive the message,
"setup could not fund the update.ini file needed to update your system.
any ideas ? -
K9A2 Platinum Audio and Video Driver problems.
I put together my new rig last night and am having a lot of problems with drivers. The rig installed windows XP SP2 in about 10 minutes though
Rig:
MSI K9A2 Platinum Bios 1.3
Phenom 9850 BE
G.SKILL 1066 5-5-5-15 2T
MSI HD 3870 OC
WD Raptor
CoolerMaster 550watt
Several fans to keep cool air flowing.
My problem is that I can not find good audio or video drivers. I started by trying the audio drivers included with the board, but they would not complete the install. I ended up downloading audio drivers from the MSI site, however they also would not install with the "#-0001" error message. I followed the instructions on the forum: https://forum-en.msi.com/index.php?topic=115396.msg866810#msg866810 including installing the MS HD Audio Driver Hotfix but still cannot get sound working.
To further complicate my problem the 3870 has HD onboard, which makes a second instance of Microsoft UAA HD Audio driver in the device manager, and also tries to find drivers for bits of it's audio hardware.
Currently I have disabled on-board audio completely through the bios, and now everytime I boot-up I get new hardware found for UAA HD Audio, and also some Media interface. Clearly this is the HD on the 3870, however I can't seem to get drivers installed that will agree with the hardware thus the message continue to pop-up!
Does anyone have suggestions or similar experiences?Quote from: AMDloyal on 24-April-08, 09:56:10
Thanks for the links.
The standard AMD ATI Drivers + South Bridge chipset drivers worked flawlessly. I've made a clean run through 3dmark06 so i feel good about them.
As for the audio.
I've worked through both of those suggestions but haven't gotten anywhere. A few times I have been able to get the drivers to install without the "error code -0001" message, but that doesn't give me sound. Under device manager I still end up with yellow exclamations. It seems no matter what I disable or try to do nothing works. I've tried updating drivers manually like was explained in the first link, but when the update is complete I get the messages lile: "There was a problem installing this device MEDIA An error occured... The data is invalid"
Does anyone know if this indicates a hardware of driver problem?
"Thanks for the links.
The standard AMD ATI Drivers + South Bridge chipset drivers worked flawlessly. I've made a clean run through 3dmark06 so i feel good about them."
you are done well.
As for the audio.
I've worked through both of those suggestions but haven't gotten anywhere. A few times I have been able to get the drivers to install without the "error code -0001" message, but that doesn't give me sound. Under device manager I still end up with yellow exclamations. It seems no matter what I disable or try to do nothing works. I've tried updating drivers manually like was explained in the first link, but when the update is complete I get the messages lile: "There was a problem installing this device MEDIA An error occured... The data is invalid"
Provide screenshot from Device manager. -
Hi all
I have built a new comp for someone who wants reliability so i choose to go Platinum, but ... i cant make it boot.
It wont even show ANYTHING on the screen (tried the vga in both Pci-e 16x just in case i was dumb enough lol) the boot "procces" stops with the Status leds showing:
4) Green
3) Green
2) RED
1) Green
According to the user guide it says:
Initializing Floppy Drive Controller.
This will initialize floppy drive and controller.
And i dont even have a floppy
Well as the problem persisted i removed EVERYTHING from the motherboard
now i left:
-Mother
-Processor
-Memory
-VGA
-PSU
And thats it. Let me tell you all the things i tried:
-Bios reset (with the little red button)
-Plug only necesary things
-Taking off the battery and replacing it (and went back to the "original")
-Tried different connectors just in case it was the PSU (i really dont think so)
-Tried different memory stick/s.
And well, thats all i think, half of this i did it with the mother in the case, and re-did all the list with the moter OUTSIDE the case. Can anybody help me ??
I guess is a BIOS problem, as i readed in another post (yeah used search first xD) but the only guy who could solve the problem was flashing the bios, but i cant even see a word on the screen, is it possible to flash the bios in my condition ??
The specs now:
Intel C2D E4500
MSI P35 PLATINUM
2x1Gb (or 1x1gb, tried single sticks as well) OCZ DDR2 667mhz (and tried also with generic "titan" memory at 800mhz, does not change anything)
Gigabyte 8400GS
POWERCOOLER PS-500 SS PSU
AFAIK i have more than enough to make this boot, but well ... you know
Thanks in advance, i tried to give all details possible, in 2 days ill go to RMA if i cant make it work, but i would like give it a try, who knows
EDIT: my english sucks really bad, forgive me !!
EDIT2: Forgot to add !! when i remove the VGA the motherboard DOES the "VGA ERROR BEEP" and the leds are in the correct combination for VGA ERROR ... so i guess processor works and ram too (both OCZ and generic), if one of these fails then it wont make any sound, m i wrong ??ITS ALIVE !!!!!!!!!!!!!
Well, to be honest, i dont know what it really was but tried 2 things:
First i followed step by step and word by word the "clearing CMOS" guide (this mobo has a button and not a juper, so i pressed the button like 2 minutes to be REALLY sure xD), then i realized that it was not doing the "beeps" anymore, but the screen was black like before.
SOOOOOOOOOOOO THEEEEEEEEN ... (shoot me in the head for this) i unplugged the video and keyboard from the KVM switch (could THIS be the problem ?? i used it wit hundreds of computers and never gave me prblems before ??? ??? ???) and plugged the cables directly and now its alive !!!
THANKS !! :D :D :D :D :D
One last thing !!
Do you recommend me to upgrade the BIOS ?? the board always did a "false boot" then starts normally, i readed it was some "hardware checking" feature, its that true or its totally useless ??
THANKKKKKKKKKKKKKKSSSSSSSSSSSSSSSSSSSSS SSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSS SSSSSSSSSS =) (im so damn happy now LOL) -
Desktop freezes and hard drives failure
Hey i faced a recent problem with my Computer, when i log in it freezes/crash i got told its due to my sound drive failuring, i tryed to download HP assistant to upgrade my sound drive but it cames up saying " Error 1719. windows installer service could not be accessed" I went to the HP software website to see if theres any sound drive but there arnt. I cant do a system restore because an error pops up. I tryed everything, nothing seems not to work .
Heres my computer specs
Im in safe mod if u want to know ^ ^
System Information
Time of this report: 4/29/2011, 14:11:56
Machine name: ASHDOWN-PC
Operating System: Windows 7 Home Premium 32-bit (6.1, Build 7601) (7601.win7sp1_rtm.101119-1850)
Language: English (Regional Setting: English)
System Manufacturer: Compaq-Presario
System Model: KQ318AA-ABU SR5414UK
BIOS: v5.03
Processor: Intel(R) Core(TM)2 Duo CPU E4600 @ 2.40GHz (2 CPUs), ~2.4GHz
Memory: 2048MB RAM
Available OS Memory: 2046MB RAM
Page File: 556MB used, 3536MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 11
DX Setup Parameters: Not found
User DPI Setting: Using System DPI
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
DxDiag Version: 6.01.7600.16385 32bit Unicode
DxDiag Previously: Crashed in system information (stage 4). Re-running DxDiag with "dontskip" command line parameter or choosing not to bypass information gathering when prompted might result in DxDiag successfully obtaining this information
DxDiag Notes
Display Tab 1: No problems found.
Sound Tab 1: This computer cannot play audio because the Windows Audio service is not enabled. Use the Sounds and Devices Properties control panel to enable audio. No sound card was found. If one is expected, you should install a sound driver provided by the hardware manufacturer.
Input Tab: No problems found.
DirectX Debug Levels
Direct3D: 0/4 (retail)
DirectDraw: 0/4 (retail)
DirectInput: 0/5 (retail)
DirectMusic: 0/5 (retail)
DirectPlay: 0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow: 0/6 (retail)
Display Devices
Card name:
Manufacturer:
Chip type:
DAC type:
Device Key: Enum\
Display Memory: n/a
Dedicated Memory: n/a
Shared Memory: n/a
Current Mode: 1600 x 1200 (32 bit) (1Hz)
Driver Name:
Driver File Version: ()
Driver Version:
DDI Version: unknown
Driver Model: unknown
Driver Attributes: Final Retail
Driver Date/Size: , 0 bytes
WHQL Logo'd: n/a
WHQL Date Stamp: n/a
Device Identifier: {D7B70EE0-4340-11CF-B123-B03DAEC2CB35}
Vendor ID: 0x0000
Device ID: 0x0000
SubSys ID: 0x00000000
Revision ID: 0x0000
Driver Strong Name: Unknown
Rank Of Driver: Unknown
Video Accel:
Deinterlace Caps: n/a
D3D9 Overlay: n/a
DXVA-HD: n/a
DDraw Status: Not Available
D3D Status: Not Available
AGP Status: Not Available
Sound Devices
Description:
Default Sound Playback: No
Default Voice Playback: No
Hardware ID:
Manufacturer ID:
Product ID:
Type:
Driver Name:
Driver Version:
Driver Attributes:
WHQL Logo'd:
Date and Size:
Other Files:
Driver Provider:
HW Accel Level: Emulation Only
Cap Flags: 0x0
Min/Max Sample Rate: 0, 0
Static/Strm HW Mix Bufs: 0, 0
Static/Strm HW 3D Bufs: 0, 0
HW Memory: 0
Voice Management: No
EAX(tm) 2.0 Listen/Src: No, No
I3DL2(tm) Listen/Src: No, No
Sensaura(tm) ZoomFX(tm): No
Sound Capture Devices
DirectInput Devices
Device Name: Mouse
Attached: 1
Controller ID: n/a
Vendor/Product ID: n/a
FF Driver: n/a
Device Name: Keyboard
Attached: 1
Controller ID: n/a
Vendor/Product ID: n/a
FF Driver: n/a
Device Name: Razer Arctosa
Attached: 1
Controller ID: 0x0
Vendor/Product ID: 0x1532, 0x010B
FF Driver: n/a
Device Name: Razer Arctosa
Attached: 1
Controller ID: 0x0
Vendor/Product ID: 0x1532, 0x010B
FF Driver: n/a
Poll w/ Interrupt: No
USB Devices
+ USB Root Hub
| Vendor/Product ID: 0x8086, 0x27C9
| Matching Device ID: usb\root_hub
| Service: usbhub
|
+-+ USB Input Device
| | Vendor/Product ID: 0x1532, 0x001C
| | Location: Port_#0002.Hub_#0002
| | Matching Device ID: generic_hid_device
| | Service: HidUsb
| |
| +-+ HID-compliant mouse
| | | Vendor/Product ID: 0x1532, 0x001C
| | | Matching Device ID: hid_device_system_mouse
| | | Service: mouhid
Gameport Devices
PS/2 Devices
+ HID Keyboard Device
| Vendor/Product ID: 0x1532, 0x010B
| Matching Device ID: hid_device_system_keyboard
| Service: kbdhid
|
+ Terminal Server Keyboard Driver
| Matching Device ID: root\rdp_kbd
| Upper Filters: kbdclass
| Service: TermDD
|
+ Terminal Server Mouse Driver
| Matching Device ID: root\rdp_mou
| Upper Filters: mouclass
| Service: TermDD
System Devices
Name: Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA
Device ID: PCI\VEN_8086&DEV_27CA&SUBSYS_2A78103C&REV_01\3&2411E6FE&1&EA
Driver: n/a
Name: Intel(R) G33/G31/P35/P31 Express Chipset PCI Express Root Port - 29C1
Device ID: PCI\VEN_8086&DEV_29C1&SUBSYS_29C18086&REV_10\3&2411E6FE&1&08
Driver: n/a
Name: Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9
Device ID: PCI\VEN_8086&DEV_27C9&SUBSYS_2A78103C&REV_01\3&2411E6FE&1&E9
Driver: n/a
Name: Intel(R) G33/G31/P35/P31 Express Chipset Processor to I/O Controller - 29C0
Device ID: PCI\VEN_8086&DEV_29C0&SUBSYS_2A78103C&REV_10\3&2411E6FE&1&00
Driver: n/a
Name: Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8
Device ID: PCI\VEN_8086&DEV_27C8&SUBSYS_2A78103C&REV_01\3&2411E6FE&1&E8
Driver: n/a
Name: Intel(R) 82801G (ICH7 Family) SMBus Controller - 27DA
Device ID: PCI\VEN_8086&DEV_27DA&SUBSYS_2A78103C&REV_01\3&2411E6FE&1&FB
Driver: n/a
Name: Intel(R) 82801GB/GR/GH (ICH7 Family) Serial ATA Storage Controller - 27C0
Device ID: PCI\VEN_8086&DEV_27C0&SUBSYS_2A78103C&REV_01\3&2411E6FE&1&FA
Driver: n/a
Name: High Definition Audio Controller
Device ID: PCI\VEN_8086&DEV_27D8&SUBSYS_2A78103C&REV_01\3&2411E6FE&1&D8
Driver: n/a
Name: Intel(R) 82801GB/GR (ICH7 Family) LPC Interface Controller - 27B8
Device ID: PCI\VEN_8086&DEV_27B8&SUBSYS_2A78103C&REV_01\3&2411E6FE&1&F8
Driver: n/a
Name: Intel(R) 82801G (ICH7 Family) PCI Express Root Port - 27D0
Device ID: PCI\VEN_8086&DEV_27D0&SUBSYS_2A78103C&REV_01\3&2411E6FE&1&E0
Driver: n/a
Name: Intel(R) 82801 PCI Bridge - 244E
Device ID: PCI\VEN_8086&DEV_244E&SUBSYS_2A78103C&REV_E1\3&2411E6FE&1&F0
Driver: n/a
Name: Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC
Device ID: PCI\VEN_8086&DEV_27CC&SUBSYS_2A78103C&REV_01\3&2411E6FE&1&EF
Driver: n/a
Name: Realtek RTL8101E Family PCI-E Fast Ethernet NIC (NDIS 6.20)
Device ID: PCI\VEN_10EC&DEV_8136&SUBSYS_2A78103C&REV_01\4&3601B127&0&00E0
Driver: n/a
Name: Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB
Device ID: PCI\VEN_8086&DEV_27CB&SUBSYS_2A78103C&REV_01\3&2411E6FE&1&EB
Driver: n/a
Name: NVIDIA GeForce 9600 GT
Device ID: PCI\VEN_10DE&DEV_0622&SUBSYS_82A11043&REV_A1\4&1EA08276&0&0008
Driver: n/a
DirectShow Filters
DirectShow Filters:
WMAudio Decoder DMO,0x00800800,1,1,WMADMOD.DLL,6.01.7600.16385
WMAPro over S/PDIF DMO,0x00600800,1,1,WMADMOD.DLL,6.01.7600.16385
WMSpeech Decoder DMO,0x00600800,1,1,WMSPDMOD.DLL,6.01.7600.16385
MP3 Decoder DMO,0x00600800,1,1,mp3dmod.dll,6.01.7600.16385
Mpeg4s Decoder DMO,0x00800001,1,1,mp4sdecd.dll,6.01.7600.16385
WMV Screen decoder DMO,0x00600800,1,1,wmvsdecd.dll,6.01.7600.16385
WMVideo Decoder DMO,0x00800001,1,1,wmvdecod.dll,6.01.7600.16597
Mpeg43 Decoder DMO,0x00800001,1,1,mp43decd.dll,6.01.7600.16385
Mpeg4 Decoder DMO,0x00800001,1,1,mpg4decd.dll,6.01.7600.16385
WMT VIH2 Fix,0x00200000,1,1,WLXVAFilt.dll,15.04.3508.1109
Record Queue,0x00200000,1,1,WLXVAFilt.dll,15.04.3508.1109
WMT Switch Filter,0x00200000,1,1,WLXVAFilt.dll,15.04.3508.1109
WMT Virtual Renderer,0x00200000,1,0,WLXVAFilt.dll,15.04.3508.1109
WMT DV Extract,0x00200000,1,1,WLXVAFilt.dll,15.04.3508.1109
WMT Virtual Source,0x00200000,0,1,WLXVAFilt.dll,15.04.3508.1109
WMT Sample Information Filter,0x00200000,1,1,WLXVAFilt.dll,15.04.3508.1109
DV Muxer,0x00400000,0,0,qdv.dll,6.06.7600.16385
Color Space Converter,0x00400001,1,1,quartz.dll,6.06.7600.16490
WM ASF Reader,0x00400000,0,0,qasf.dll,12.00.7600.16385
DivX AAC Decoder,0x00800000,1,1,daac.ax,7.01.0000.0010
Screen Capture filter,0x00200000,0,1,wmpsrcwp.dll,12.00.7600.16385
AVI Splitter,0x00600000,1,1,quartz.dll,6.06.7600.16490
VGA 16 Color Ditherer,0x00400000,1,1,quartz.dll,6.06.7600.16490
SBE2MediaTypeProfile,0x00200000,0,0,sbe.dll,6.06.7600.16724
Microsoft DTV-DVD Video Decoder,0x005fffff,2,4,msmpeg2vdec.dll,6.01.7140.0000
AC3 Parser Filter,0x00600000,1,1,mpg2splt.ax,6.06.7600.16724
StreamBufferSink,0x00200000,0,0,sbe.dll,6.06.7600.16724
Microsoft TV Captions Decoder,0x00200001,1,0,MSTVCapn.dll,6.01.7600.16385
MJPEG Decompressor,0x00600000,1,1,quartz.dll,6.06.7600.16490
CBVA DMO wrapper filter,0x00200000,1,1,cbva.dll,6.01.7600.16385
MPEG-I Stream Splitter,0x00600000,1,2,quartz.dll,6.06.7600.16490
SAMI (CC) Parser,0x00400000,1,1,quartz.dll,6.06.7600.16490
VBI Codec,0x00600000,1,4,VBICodec.ax,6.06.7600.16385
MPEG-2 Splitter,0x005fffff,1,0,mpg2splt.ax,6.06.7600.16724
Closed Captions Analysis Filter,0x00200000,2,5,cca.dll,6.06.7600.16385
SBE2FileScan,0x00200000,0,0,sbe.dll,6.06.7600.16724
Microsoft MPEG-2 Video Encoder,0x00200000,1,1,msmpeg2enc.dll,6.01.7600.16385
DivX MKV Demux (unrestricted),0x00200000,0,1,DMFSource.ax,1.00.0002.0006
Internal Script Command Renderer,0x00800001,1,0,quartz.dll,6.06.7600.16490
MPEG Audio Decoder,0x03680001,1,1,quartz.dll,6.06.7600.16490
DV Splitter,0x00600000,1,2,qdv.dll,6.06.7600.16385
Video Mixing Renderer 9,0x00200000,1,0,quartz.dll,6.06.7600.16490
Microsoft MPEG-2 Encoder,0x00200000,2,1,msmpeg2enc.dll,6.01.7600.16385
ACM Wrapper,0x00600000,1,1,quartz.dll,6.06.7600.16490
Video Renderer,0x00800001,1,0,quartz.dll,6.06.7600.16490
MPEG-2 Video Stream Analyzer,0x00200000,0,0,sbe.dll,6.06.7600.16724
Line 21 Decoder,0x00600000,1,1,qdvd.dll,6.06.7600.16385
Video Port Manager,0x00600000,2,1,quartz.dll,6.06.7600.16490
DivX H.264 Decoder,0x00800000,1,1,DivXDecH264.ax,9.00.0001.0021
Video Renderer,0x00400000,1,0,quartz.dll,6.06.7600.16490
File Writer,0x00200000,1,0,WLXVAFilt.dll,15.04.3508.1109
DivX Decoder Filter,0x00800000,1,1,DivXDec.ax,7.01.0001.0014
VPS Decoder,0x00200000,0,0,WSTPager.ax,6.06.7600.16385
WM ASF Writer,0x00400000,0,0,qasf.dll,12.00.7600.16385
VBI Surface Allocator,0x00600000,1,1,vbisurf.ax,6.01.7600.16385
File writer,0x00200000,1,0,qcap.dll,6.06.7600.16385
iTV Data Sink,0x00600000,1,0,itvdata.dll,6.06.7600.16385
iTV Data Capture filter,0x00600000,1,1,itvdata.dll,6.06.7600.16385
DVD Navigator,0x00200000,0,3,qdvd.dll,6.06.7600.16385
Microsoft TV Subtitles Decoder,0x00200001,1,0,MSTVCapn.dll,6.01.7600.16385
Overlay Mixer2,0x00200000,1,1,qdvd.dll,6.06.7600.16385
DivX MKV Demux,0x00600000,0,1,DMFSource.ax,1.00.0002.0006
AVI Draw,0x00600064,9,1,quartz.dll,6.06.7600.16490
RDP DShow Redirection Filter,0xffffffff,1,0,DShowRdpFilter.dll,
Microsoft MPEG-2 Audio Encoder,0x00200000,1,1,msmpeg2enc.dll,6.01.7600.16385
WST Pager,0x00200000,1,1,WSTPager.ax,6.06.7600.16385
MPEG-2 Demultiplexer,0x00600000,1,1,mpg2splt.ax,6.06.7600.16724
DV Video Decoder,0x00800000,1,1,qdv.dll,6.06.7600.16385
LAME Audio Encoder,0x00100000,2,1,lame.ax,1.00.0054.50801
SampleGrabber,0x00200000,1,1,qedit.dll,6.06.7600.16385
Null Renderer,0x00200000,1,0,qedit.dll,6.06.7600.16385
MPEG-2 Sections and Tables,0x005fffff,1,0,Mpeg2Data.ax,6.06.7600.16385
Microsoft AC3 Encoder,0x00200000,1,1,msac3enc.dll,6.01.7600.16385
StreamBufferSource,0x00200000,0,0,sbe.dll,6.06.7600.16724
Smart Tee,0x00200000,1,2,qcap.dll,6.06.7600.16385
Overlay Mixer,0x00200000,0,0,qdvd.dll,6.06.7600.16385
AVI Decompressor,0x00600000,1,1,quartz.dll,6.06.7600.16490
NetBridge,0x00200000,2,0,netbridge.dll,6.01.7600.16385
AVI/WAV File Source,0x00400000,0,2,quartz.dll,6.06.7600.16490
Wave Parser,0x00400000,1,1,quartz.dll,6.06.7600.16490
MIDI Parser,0x00400000,1,1,quartz.dll,6.06.7600.16490
Multi-file Parser,0x00400000,1,1,quartz.dll,6.06.7600.16490
File stream renderer,0x00400000,1,1,quartz.dll,6.06.7600.16490
Microsoft DTV-DVD Audio Decoder,0x005fffff,1,1,msmpeg2adec.dll,6.01.7140.0000
StreamBufferSink2,0x00200000,0,0,sbe.dll,6.06.7600.16724
AVI Mux,0x00200000,1,0,qcap.dll,6.06.7600.16385
Line 21 Decoder 2,0x00600002,1,1,quartz.dll,6.06.7600.16490
File Source (Async.),0x00400000,0,1,quartz.dll,6.06.7600.16490
File Source (URL),0x00400000,0,1,quartz.dll,6.06.7600.16490
Media Center Extender Encryption Filter,0x00200000,2,2,Mcx2Filter.dll,6.01.7600.16385
AudioRecorder WAV Dest,0x00200000,0,0,WavDest.dll,
AudioRecorder Wave Form,0x00200000,0,0,WavDest.dll,
SoundRecorder Null Renderer,0x00200000,0,0,WavDest.dll,
Infinite Pin Tee Filter,0x00200000,1,1,qcap.dll,6.06.7600.16385
Enhanced Video Renderer,0x00200000,1,0,evr.dll,6.01.7600.16385
BDA MPEG2 Transport Information Filter,0x00200000,2,0,psisrndr.ax,6.06.7600.16385
MPEG Video Decoder,0x40000001,1,1,quartz.dll,6.06.7600.16490
WDM Streaming Tee/Splitter Devices:
Tee/Sink-to-Sink Converter,0x00200000,1,1,ksproxy.ax,6.01.7600.16385
Video Compressors:
WMVideo8 Encoder DMO,0x00600800,1,1,wmvxencd.dll,6.01.7600.16385
WMVideo9 Encoder DMO,0x00600800,1,1,wmvencod.dll,6.01.7600.16385
MSScreen 9 encoder DMO,0x00600800,1,1,wmvsencd.dll,6.01.7600.16385
DV Video Encoder,0x00200000,0,0,qdv.dll,6.06.7600.16385
MJPEG Compressor,0x00200000,0,0,quartz.dll,6.06.7600.16490
Cinepak Codec by Radius,0x00200000,1,1,qcap.dll,6.06.7600.16385
DivX 6.9.2 Codec (2 Logical CPUs),0x00200000,1,1,qcap.dll,6.06.7600.16385
Fraps Video Decompressor,0x00200000,1,1,qcap.dll,6.06.7600.16385
Intel IYUV codec,0x00200000,1,1,qcap.dll,6.06.7600.16385
Intel IYUV codec,0x00200000,1,1,qcap.dll,6.06.7600.16385
Microsoft RLE,0x00200000,1,1,qcap.dll,6.06.7600.16385
Microsoft Video 1,0x00200000,1,1,qcap.dll,6.06.7600.16385
x264vfw - H.264/MPEG-4 AVC codec,0x00200000,1,1,qcap.dll,6.06.7600.16385
DivX 6.9.2 YV12 Decoder,0x00200000,1,1,qcap.dll,6.06.7600.16385
Audio Compressors:
WM Speech Encoder DMO,0x00600800,1,1,WMSPDMOE.DLL,6.01.7600.16385
WMAudio Encoder DMO,0x00600800,1,1,WMADMOE.DLL,6.01.7600.16385
IMA ADPCM,0x00200000,1,1,quartz.dll,6.06.7600.16490
PCM,0x00200000,1,1,quartz.dll,6.06.7600.16490
Microsoft ADPCM,0x00200000,1,1,quartz.dll,6.06.7600.16490
GSM 6.10,0x00200000,1,1,quartz.dll,6.06.7600.16490
Messenger Audio Codec,0x00200000,1,1,quartz.dll,6.06.7600.16490
CCITT A-Law,0x00200000,1,1,quartz.dll,6.06.7600.16490
CCITT u-Law,0x00200000,1,1,quartz.dll,6.06.7600.16490
MPEG Layer-3,0x00200000,1,1,quartz.dll,6.06.7600.16490
PBDA CP Filters:
PBDA DTFilter,0x00600000,1,1,CPFilters.dll,6.06.7600.16724
PBDA ETFilter,0x00200000,0,0,CPFilters.dll,6.06.7600.16724
PBDA PTFilter,0x00200000,0,0,CPFilters.dll,6.06.7600.16724
Midi Renderers:
Default MidiOut Device,0x00800000,1,0,quartz.dll,6.06.7600.16490
Microsoft GS Wavetable Synth,0x00200000,1,0,quartz.dll,6.06.7600.16490
BDA Network Providers:
Microsoft ATSC Network Provider,0x00200000,0,1,MSDvbNP.ax,6.06.7600.16385
Microsoft DVBC Network Provider,0x00200000,0,1,MSDvbNP.ax,6.06.7600.16385
Microsoft DVBS Network Provider,0x00200000,0,1,MSDvbNP.ax,6.06.7600.16385
Microsoft DVBT Network Provider,0x00200000,0,1,MSDvbNP.ax,6.06.7600.16385
Microsoft Network Provider,0x00200000,0,1,MSNP.ax,6.06.7600.16648
Multi-Instance Capable VBI Codecs:
VBI Codec,0x00600000,1,4,VBICodec.ax,6.06.7600.16385
BDA Transport Information Renderers:
BDA MPEG2 Transport Information Filter,0x00600000,2,0,psisrndr.ax,6.06.7600.16385
MPEG-2 Sections and Tables,0x00600000,1,0,Mpeg2Data.ax,6.06.7600.16385
BDA CP/CA Filters:
Decrypt/Tag,0x00600000,1,1,EncDec.dll,6.06.7600.16724
Encrypt/Tag,0x00200000,0,0,EncDec.dll,6.06.7600.16724
PTFilter,0x00200000,0,0,EncDec.dll,6.06.7600.16724
XDS Codec,0x00200000,0,0,EncDec.dll,6.06.7600.16724
WDM Streaming Communication Transforms:
Tee/Sink-to-Sink Converter,0x00200000,1,1,ksproxy.ax,6.01.7600.16385
Audio Renderers:
Default DirectSound Device,0x00800000,1,0,quartz.dll,6.06.7600.16490
Default WaveOut Device,0x00200000,1,0,quartz.dll,6.06.7600.16490
EVR Power Information
Current Setting: {5C67A112-A4C9-483F-B4A7-1D473BECAFDC} (Quality)
Quality Flags: 2576
Enabled:
Force throttling
Allow half deinterlace
Allow scaling
Decode Power Usage: 100
Balanced Flags: 1424
Enabled:
Force throttling
Allow batching
Force half deinterlace
Force scaling
Decode Power Usage: 50
PowerFlags: 1424
Enabled:
Force throttling
Allow batching
Force half deinterlace
Force scaling
Decode Power Usage: 0You can make them visible on the Desktop using Finder/Preferences/General. You can also set them to show up in the Finder Sidebar using Preferences/Sidebar.
-
Upgrading system to MSI P35 Platinum
MBO = MSI 945P
CPU = Intel 3.4ghx
Graphics = NVidia GEForce 7600GT
OS = Win Vista Home Premium
Memory = 2GB
HDrive = Maxtor 250gb SATA
Audio = Creative Audigy
Monitor = Dell 1704FPT
Optical Drives = Lite-on DVDRW 1693S
= Sony CD-RW CRX230EE
CSU + Enermax EG465P
CASE = ANTEC MID TOWER
Please forgive me starting this again as a New Topic. I thought most of you wouldn't want to read over an old post.....I hope I was right?
I finally have started the ball rolling with my rebuild, I have follwed recommendations and bought the MSI P35 platinum MBO. I am now looking at a Q6600 Quad processor, I now would like to review the compatibility of my other components. Will my Enermax handle the power reqd, should I go for a new heat-sink/cooler? Will my case need replacing? I am concerned with heating after my Pentium 4 processor which radiated like a stove pipe. I have read the P35 does a great job of cooling main reason I chose it. I also would like to quieten fan noise as much as possible, existing set-up is noisy. I hope I can still draw your interest into my plight....I'd rather slow things down and get it right. Thanks in advanceMine is an Enermax EG701AX-VE (600W) the fan was noisy and did get a bit rattly in my previous P4N Diamond 7160 + Northwood EE set up and the exhaust air was very warm. Since I upgraded to the P35 Platinum 7345 + Q6600 the fan is now quiet as I can turn it down to minimum and the exhaust air is still cool.
I read the reviews on all the CPU coolers and the best budget one seems to be the Arctic Cooling Freezer Pro7. I was looking for a cooler around £40 and after looking at performance tables went for the Thermaltake V1. It also dropped the system temperature (around the circu-pipes) and overall case temperature significantly.
Here's a link http://forum.thermaltake.com/viewtopic.php?t=2375
Good luck with your build
Regards
Bren -
Possible Imminent Hard Drive Failure?
First off I have an Early 2011 MacBook Pro running OSX Mountain Lion. Avast version 7.0 is running as my anti-virus software with current definitions. I'm a network administration student so I run 2 or 3 virtual machines simultaneously to replicate a domain environment for learning. With that I decided I need space for all these operating systems plus my music and pics, so 10 Days ago I purchased a new Seagate 750GB HD Microcenter and upgraded to 8GB from 4GB of ram while I had the case open. HD has worked like a champ and the computer has been faster for days until last night. I was on Facebook and suddenly I got the spinning beach ball of death. Giving it the mac 3 the mac version of the three-finger salute didn't help me so I went for the hard restart. After that I got the blank grey screen. I restarted with the option key and all I saw was my Windows Partition, but when I tried to boot to it I got a kernel panic. So I went and got the OSX Mountain Lion thumb drive I made (didn't expect to be needing that so soon) and used disk utility. Disk Utility could not verify the disk and told me to format the disk and reinstall OSX. Knowing that I have everything recently backed up with time machine and Winclone I went ahead and formatted and restored my time machine backup along with my Winclone backup. (My attitude was, what were my options)
During the restoration process of OSX I had zero problems, while doing the restoration of my Windows partition with Winclone I was watching the console log and saw this.....
9/19/12 7:20:44.653 AM Winclone[460]: 19.62 percent completed
9/19/12 7:20:57.674 AM Winclone[460]: 20.63 percent completed
9/19/12 7:21:10.989 AM Winclone[460]: 21.64 percent completed
9/19/12 7:21:13.000 AM kernel[0]: (default pager): [KERNEL]: ps_allocate_cluster - send HI_WAT_ALERT
9/19/12 7:21:13.000 AM kernel[0]: macx_swapon SUCCESS
9/19/12 7:21:25.018 AM Winclone[460]: 22.65 percent completed
9/19/12 7:21:26.489 AM com.apple.launchd.peruser.501[368]: (com.apple.coreservices.appleid.authentication[479]) Exited: Killed: 9
9/19/12 7:21:26.000 AM kernel[0]: memorystatus_thread: idle exiting pid 479 [AppleIDAuthAgent]
9/19/12 7:21:30.768 AM Messages[379]: [Warning] Could not find transfer for guid: E1C93988-7FB6-46D9-949C-3D0F0A6A35FF
9/19/12 7:21:30.768 AM Messages[379]: [Warning] Could not find transfer for guid: 2E3B4C2A-007C-4877-A34E-9F2DDE148B18
9/19/12 7:21:30.768 AM Messages[379]: [Warning] Could not find transfer for guid: 3FDFED6A-9F52-4F19-ACAE-8802867CE8EB
9/19/12 7:21:30.768 AM Messages[379]: [Warning] Could not find transfer for guid: 21B6D0B5-DD7E-4442-A2FD-23C5572EB46F
9/19/12 7:21:31.848 AM com.apple.launchd[1]: (com.apple.iCloudHelper[468]) Exited: Killed: 9
9/19/12 7:21:31.000 AM kernel[0]: memorystatus_thread: idle exiting pid 468 [com.apple.iCloud]
9/19/12 7:21:33.241 AM com.apple.launchd.peruser.501[368]: (com.apple.CalendarAgent[465]) Exited: Killed: 9
9/19/12 7:21:33.000 AM kernel[0]: memorystatus_thread: idle exiting pid 465 [CalendarAgent]
9/19/12 7:21:34.662 AM com.apple.launchd.peruser.501[368]: (com.apple.pbs[444]) Exited: Killed: 9
9/19/12 7:21:34.000 AM kernel[0]: memorystatus_thread: idle exiting pid 444 [pbs]
9/19/12 7:21:35.822 AM com.apple.launchd[1]: (com.apple.audio.SandboxHelper[440]) Exited: Killed: 9
9/19/12 7:21:35.000 AM kernel[0]: memorystatus_thread: idle exiting pid 440 [com.apple.audio.]
9/19/12 7:21:37.244 AM com.apple.launchd[1]: (com.apple.xpcd.CA000000-0000-0000-0000-000000000000[439]) Exited: Killed: 9
9/19/12 7:21:37.000 AM kernel[0]: memorystatus_thread: idle exiting pid 439 [xpcd]
9/19/12 7:21:37.598 AM Winclone[460]: 23.66 percent completed
I'm not a beginner Mac user but I'm not an all-knowing genius of the Mac either, but I know the GUID has something to do with the file structure of the hard drive.... Either way after I performed the restoration everything seems to be back to normal. The same fast computer I had before with no glitches and disk utility has even verified my disk on several occasions now and hasn't reported any issues.
So here is my ultimate question? What would cause this random failure in the first place if not the HD? Is the forum's consensus that I should take the HD back anyways even though all checks are passing currently? And, if not the HD how can I prevent this from happening again? Let's face it, I'm a college student, I need my computer. Luckily it died when I was going to bed and I could let it restore overnight. Also, It's lucky for me that I didn't have class this morning and have no assignments pending that are immediately due so I can complete the windows restoration in the morning.
I'll be looking forward to everyone's insight.Thanks for the info.
I just bought Techtool Pro last week when I my hard drive directories got chewed up the first time. The box has a "Tiger Compatible" sticker on it so I imagine it's at least v4.0.4 on the CD. (Although I will check now)
However, I think now the problem has progressed. Now the hard drive goes into a 1-2 minute cycling routine a couple times per day even if the computer is idle. Out of nowhere it starts up and it makes this repetitious reading/writing sound. It lasts 1-2 minutes and during this time the computer is hung-up (round-rainbow animated icon) and can't do anything, just have to wait it out.
At this point I'm thinking of calling it quits and I'm just going to take the machine in while there is still a warranty on it as I'm really starting to believe it's drive failure and not a problem with software. -
Problem installing MSI P35 Platinum & MSI NX8600GT & windows XP
Hi all,
I just bought my MSI P35 platinum mobo and MSI NX8600GT graphics card.
Was trying to install XP on it. During installation, got the following error message :
A problem has been detected and windows has been shut down to prevent damage to your computer.
If this is the first time you've seen this Stop error screen, restart your computer. If this appears again, follow these steps:
Check to be sure you have adequate disk space. If a driver is identified in the Stop message, disable the driver or check with the manufacturer for driver updates. Try changing video adapters.
Check with your hardware vendor for any BIOS updates. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode.
Technical Information:
*** Stop : 0X0000007E (0XC0000005, 0XF748E0BF, 0XF78DA208, 0XF78D9F08)
*** pci.sys - Address F748E0BF base at F7487000, DateStamp 3b7d855c
Then it just freezes there. Any ideas how I can resolve this ? Please help
Thanks ...Quote from: NovJoe on 07-February-08, 00:17:44
Please post your full system specs and PSU specs amps.
Moan Guide
my system specs
Intel Pentium 4 - Intel E8200, LGA775 2.66GHz, 6MB L2 cache, 1333 Mhz FSB, 45nm
MSI P35 Platinum
3 x 1GB DDR2 Kingston 6400 CL5 800MHz
320GB Seagate SATA HDD
MSI NX8600GT 256MB
Windows XP Pro
PSU : I-CUTE ATX-450W/P4
The HDD was detected correctly in BIOS, memory also detected, Graphics card seems ok (how I can tell ?)
rgds -
I had a drive failure and lost the iWeb file along with other things.
I did manage to save a lot of user file documents but I don't see or
recognize the iWeb site file. It was on a 15" G4 Titanium pb.
I'm trying to find a way, using version 2.0.4 of iWeb on a different
pb to recover the file into the iWeb app or a way to download the site into iWeb.
There are 6 pages of images and text, and it
would be a task for me to recreate the whole thing again. I did
download the site but I don't know how or if I can get iWeb to see it and open it.
Does anyone have any knowledge about this? The link to my site:
<http://web.mac.com/danauerbach>
Any suggestions will be most appreciated.
dan auerbach
[email protected]Unfortunately iWeb cannot read or import previously published files, only generate them. You'll have to recreate your site from scratch.
However, Chapter 2.3 on the iWeb FAQ.org site has tips on using some of the existing files, image, audio, video, etc., from the published site in the recreation of the site.
OT
Maybe you are looking for
-
Issue in calling the web service
Hi, I have created one web service, they call this from .Net system. Here I am using one function module "QC01_BATCH_VALUES_READ" to get the Customer status of the material. Here the issue is, when I run this web service in SAP, it is returning t
-
How do i stop each song getting up under seperate album covers?
hello, I want to load all my mp3s (about 500) onto my itunes, but everytime i do this, each song comes up under individual album covers, how can I put all the songs under just one album cover or no album at all? i dont want to have 500 different albu
-
I have a mysql table with three attributes. att1 | att2 | att3 1 | 0.1 | 0.2 2 | 0.4 | 0.3 3 | 0.2 | 0.1 4 | 0.3 | 0.5 Now through my program, I select one record according to attribute 2. Suppose in this case I select the value 0.2(from att2) and ge
-
Ignore spelling differences?
If I do a search for ...contains(column, 'catalogue'), I get 768 results. If I do a search for ...contains(column,'catalog'), I get 349 results. How can I make Oracle Text ignore such spelling differences? (I hoped normal stemming would do it, but no
-
IPhoto Keyword and Descriptions
Over the last year, i have spent a lot of time scanning over 1,400 very old family photos into iPhoto 09 and have added keywords and descriptions. Now I would like to provide the enhanced pictures along with the keywords and descriptions to various f