P35 Platinum stuck with 008D error in boot with newly added OCZ Fatal1ty rams
Hi,
I was using 2x1 GB 800 MHZ OCZ vista performance rams without any problem. I just bought 2x1 OCZ Fatal1ty 1066 MHZ rams. In the specification of my P35 Platinum mainboard it tells that it supports 1066 (OC).
I don't want of course to run all my rams at 1066 MHZ. I just want to run all of them at 800 MHZ.
However, when I placed all 4 rams in every combinotion on the slots, computer boots but it stuck after the boot screen and there is "008D" in the rightdown corner.
Interestingly when I just put Fatality rams (2GB) computer doesn't boot! Only 1xvista perf. Mhz 1xFatal1ty or 1xvista perf. Mhz 1xFatal1ty works but stuck at after the boot screen.
I tried to enter 5-5-5-15 values and tried to adjust memory voltage to 2.1 V as told in the new ram's specification but doesn't affect. What is your solution? Since new rams do not work among themselves, are they broken or my board doesn't support them?
If I'm not wrong, your post sounds to me that you are trying to mix the OCZ Vista and OCZ Fatal1ty RAMs on the same board.
This is highly not recommended as both RAMs are very different in most aspects (Speed, latencies, voltage and made).
I would suggest that you clear CMOS and choose which set you'll want to boot the system with and settle with that.
Similar Messages
-
G580 Upgrade to Windows 10 failed in the SAFE_OS phase with an error during BOOT operation
0xC1900101-0x20017 I could not successfully upgrade from windows update, nor from the straight download site. The installation failed in the SAFE_OS phase with an error during BOOT operation. I see w10 bios updates for other models. Has anyone been successful in upgrading to W10 from W8?
2015-07-31 21:36:19, Error CDiagnosticsHelper:etSQMDatapoint: Attempting to set a datapoint in an invalid SQM session
2015-07-31 21:36:19, Error CDiagnosticsHelper:etSQMDatapoint: Attempting to set a datapoint in an invalid SQM session
2015-07-31 21:36:21, Error MOUPG CDlpActionImpl<class CDlpErrorImpl<class CDlpObjectInternalImpl<class CUnknownImpl<class IMoSetupDlpAction> > > >:uspend(1066): Result = 0xC18001042015-07-31 21:36:21, Error MOUPG CSetupManager::ExecuteInstallMode(656): Result = 0x800705BB
2015-07-31 21:36:21, Error MOUPG CSetupManager::ExecuteDownlevelMode(376): Result = 0x800705BB
2015-07-31 21:36:21, Error MOUPG CSetupManager::Execute(222): Result = 0x800705BB
2015-07-31 21:36:21, Error MOUPG CSetupHost::Execute(370): Result = 0x800705BB
2015-07-31 21:36:21, Error MOUPG CDlpManager::AsyncSerializeDisable(471): Result = 0x80070216
2015-07-31 21:36:36, Error CallPidGenX: PidGenX function failed on this product key. (hr = 0x8a010101)
2015-07-31 21:36:40, Error CallPidGenX: PidGenX function failed on this product key. (hr = 0x8a010101)
2015-07-31 21:37:02, Error CDiagnosticsHelper:etSQMDatapoint: Attempting to set a datapoint in an invalid SQM session
2015-07-31 21:37:03, Error CDiagnosticsHelper:etSQMDatapoint: Attempting to set a datapoint in an invalid SQM session
2015-07-31 21:37:04, Error CDiagnosticsHelper:etDeferredSQMDatapoint: Attempting to set a deferred SQM datapoint in an invalid SQM session[gle=0x000000b7]
2015-07-31 21:37:04, Error CDiagnosticsHelper:etDeferredSQMDatapoint: Attempting to set a deferred SQM datapoint in an invalid SQM session[gle=0x000000b7]
2015-07-31 21:37:11, Error CDiagnosticsHelper:etSQMDatapoint: Attempting to set a datapoint in an invalid SQM session
2015-07-31 21:39:15, Error CDiagnosticsHelper:etSQMDatapoint: Attempting to set a datapoint in an invalid SQM session
2015-07-31 21:39:18, Error CDiagnosticsHelper:etDeferredSQMDatapoint: Attempting to set a deferred SQM datapoint in an invalid SQM session[gle=0x000000b7] -
I started download of OS X Mountain Lion and it stopped with "An error has occurred" with no option to resume download. When I go to appstore it shows but again.
Try this Discussion...
https://discussions.apple.com/message/19032230#19032230 -
After upgrading to Mountain Lion, Interface builder starts up with an error every boot.
I've got a late 2008 Macbook Unibody 13", and a few months back I upgraded from Snow Leopard to Mountain Lion. Ever since the upgrade, at every boot up Interface Builder starts up with an error. I've just ignored it mostly, but now I'm getting annoyed with it. How can I find the programs that start up every boot to research this, or stop it from loading Interface Builder every time?
You have to delete it using the minus sign at the bottom. The check/un-check is for hiding items.
-
[Solved] "Version Magic" error when booting with m
Hi, I compiled kernel 2.6.16.18 and I receive the following error when booting:
ide_core: version magic '2.6.16-ARCH SMP preempt 686 gcc-4.0' should be '2.6.16.18-ARCH preempt 686 gcc-4.0'
amd74xx: version magic '2.6.16-ARCH SMP preempt 686 gcc-4.0' should be '2.6.16.18-ARCH preempt 686 gcc-4.0'
generic: version magic '2.6.16-ARCH SMP preempt 686 gcc-4.0' should be '2.6.16.18-ARCH preempt 686 gcc-4.0'
ide_disk: version magic '2.6.16-ARCH SMP preempt 686 gcc-4.0' should be '2.6.16.18-ARCH preempt 686 gcc-4.0'
cdrom: version magic '2.6.16-ARCH SMP preempt 686 gcc-4.0' should be '2.6.16.18-ARCH preempt 686 gcc-4.0'
ide_cd: version magic '2.6.16-ARCH SMP preempt 686 gcc-4.0' should be '2.6.16.18-ARCH preempt 686 gcc-4.0'
ide_floppy: version magic '2.6.16-ARCH SMP preempt 686 gcc-4.0' should be '2.6.16.18-ARCH preempt 686 gcc-4.0'
sd_mod: version magic '2.6.16-ARCH SMP preempt 686 gcc-4.0' should be '2.6.16.18-ARCH preempt 686 gcc-4.0'
libata: version magic '2.6.16-ARCH SMP preempt 686 gcc-4.0' should be '2.6.16.18-ARCH preempt 686 gcc-4.0'
sata_nv: version magic '2.6.16-ARCH SMP preempt 686 gcc-4.0' should be '2.6.16.18-ARCH preempt 686 gcc-4.0'
jbd: version magic '2.6.16-ARCH SMP preempt 686 gcc-4.0' should be '2.6.16.18-ARCH preempt 686 gcc-4.0'
ext3: version magic '2.6.16-ARCH SMP preempt 686 gcc-4.0' should be '2.6.16.18-ARCH preempt 686 gcc-4.0'
jfs: version magic '2.6.16-ARCH SMP preempt 686 gcc-4.0' should be '2.6.16.18-ARCH preempt 686 gcc-4.0'
reiserfs: version magic '2.6.16-ARCH SMP preempt 686 gcc-4.0' should be '2.6.16.18-ARCH preempt 686 gcc-4.0'
xfs: version magic '2.6.16-ARCH SMP preempt 686 gcc-4.0' should be '2.6.16.18-ARCH preempt 686 gcc-4.0'
I compiled my kernel with this line:
# make -s clean bzImage modules modules_install
Any ideas?Ok, I fixed it.
When doing mkinitrd auto it would make an initrd image from the modules at /lib/modules/2.6.16-ARCH when it had to do it from /lib/modules/2.6.16.18-ARCH
I fixed it with
mkinitrd kernel_version=2.6.16.18-ARCH
Also my menu.lst was wrong, a new image was created under the name of
initrd-2.6.16.18-ARCH.img.
My menu.lst pointed to initrd26.img. I didn't change it before because I didn't know, someone should update the wiki article about compiling the kernel from source. -
Error on boot with kernel26 and kernel26beyond 2.6.19
i get this right after "Loading Udev Events", it hangs for about 4 minutes then continues to boot just fine. blacklisting snd_hda_intel and snd_hda_codec fixes the problem any ideas? the audio device is "Intel Corporation 8281G (ICH7 Family) High Definition Audio Controller (rev 02)"
BUG: unable to handle kernel NULL pointer dereference at virtual address 00000000
printing eip:
f8a840a8
*pde = 00000000
Oops: 0002 [#1]
PREEMPT SMP
Modules linked in: snd_seq_oss snd_seq_midi_event tsdev snd_seq snd_seq_device joydev snd_pcm_oss snd_mixer_oss ohci1394 yenta_socket sdhci mmc_core ieee1394 evdev snd_hda_intel snd_hda_codec snd_pcm snd_timer snd soundcore snd_page_alloc tifm_7xx1 tifm_core ehci_hcd rsrc_nonstatic pcmcia_core intel_agp agpgart rtc i2c_i801 i2c_core psmouse serio_raw uhci_hcd sg pcspkr r8169 r1000 usbcore ext3 jbd mbcache sd_mod sr_mod cdrom ata_piix ata_generic libata
CPU: 1
EIP: 0060:[<f8a840a8>] Not tainted VLI
EFLAGS: 00010202 (2.6.19-ARCH #1)
EIP is at get_input_type+0x88/0x90 [snd_hda_codec]
eax: 00000007 ebx: c1a253c0 ecx: 00000002 edx: 00000000
esi: c1a253e4 edi: c1a2f0c8 ebp: dfee4840 esp: f7fbbce8
ds: 007b es: 007b ss: 0068
Process modprobe (pid: 2425, ti=f7fba000 task=dff88030 task.ti=f7fba000)
Stack: c1a253c0 f8a84d56 f8a8e764 f8a8e735 00000280 00000000 00000004 c18daf70
00000000 c1a2f0c0 c01086d8 f7c82800 f7c82a24 00000000 f7fbbd3c f7d84140
f7984c40 00020000 c022a01a 00000000 c01abfeb 0000028a f8942e80 00000246
Call Trace:
[<f8a84d56>] build_generic_controls+0x96/0x390 [snd_hda_codec]
[<c01086d8>] dma_alloc_coherent+0xd8/0x110
[<c022a01a>] idr_get_new+0xa/0x30
[<c01abfeb>] proc_register+0x8b/0x110
[<c01ac6a6>] create_proc_entry+0x66/0xb0
[<f893af91>] snd_info_register+0x81/0xa0 [snd]
[<f896564f>] snd_pcm_lib_preallocate_pages+0x6f/0x110 [snd_pcm]
[<f8965740>] snd_pcm_lib_preallocate_pages_for_all+0x50/0x80 [snd_pcm]
[<f8890d6e>] create_codec_pcm+0xee/0x140 [snd_hda_intel]
[<f8a83b8c>] snd_hda_build_controls+0x2c/0x90 [snd_hda_codec]
[<f8891636>] azx_probe+0x656/0x810 [snd_hda_intel]
[<f8890740>] azx_send_cmd+0x0/0x100 [snd_hda_intel]
[<f8890840>] azx_get_response+0x0/0x170 [snd_hda_intel]
[<c022a3cf>] kobject_get+0xf/0x20
[<c02353b6>] pci_device_probe+0x56/0x80
[<c029218b>] really_probe+0x3b/0x110
[<c02922a9>] driver_probe_device+0x49/0xd0
[<c034256d>] klist_next+0x5d/0xa0
[<c0292430>] __driver_attach+0x80/0x90
[<c02916ea>] bus_for_each_dev+0x3a/0x60
[<c0292086>] driver_attach+0x16/0x20
[<c02923b0>] __driver_attach+0x0/0x90
[<c0291a8c>] bus_add_driver+0x7c/0x1a0
[<c023558c>] __pci_register_driver+0x7c/0xa0
[<c0145e8d>] sys_init_module+0x15d/0x1b60
[<c01627ac>] do_mmap_pgoff+0x53c/0x7b0
[<c0108090>] sys_mmap2+0xd0/0xe0
[<c01032c1>] sysenter_past_esp+0x56/0x79
[<c034007b>] netlbl_domhsh_remove+0x3b/0x140
=======================
Code: cc 83 e1 0f ba d9 e6 a8 f8 83 f9 02 b8 e3 e6 a8 f8 0f 45 d0 eb b7 83 e1 0f ba c6 e6 a8 f8 83 f9 02 b8 d1 e6 a8 f8 0f 45 d0 eb a2 <83> 0a 04 eb bc 8d 76 00 83 ec 0c 89 1c 24 89 74 24 04 89 7c 24
EIP: [<f8a840a8>] get_input_type+0x88/0x90 [snd_hda_codec] SS:ESP 0068:f7fbbce8To find out what happened during the installation, boot from the software 1of2 cd, to single user mode, with the following command:
boot cdrom -s
The system will bootup to a # prompt. fsck the root filesystem, and mount it to /a, with something like the following:
fsck /dev/rdsk/c0t0d0s0
mount /dev/dsk/c0t0d0s0 /a
If /var is a separate partition, you will have to fsck/mount it too:
fsck /dev/rdsk/c0t0d0s3
mount /dev/dsk/c0t0d0s3 /a/var
The installation log will be in /a/var/sadm/install/logs/install_log. This file should have information about what happened during the installation. -
P35 platinum(7345) and "F" keys on boot up
does any body know of any f keys to press on boot up apart from f8 -- f11--and f4 in bios. i only need for my help section when trying to resolve problems for my self and others. thanks in advace
Oh man, do I feel your pain. In the last 2 weeks, I've had to re-install Snow Leopard 4 times because of a machine lockup. I haven't been able to find anything to fix the problem. I have 2.5 GB of RAM installed, over 70% of my hard drive is available (free GB to use for virtual memory, scratch disk, etc.), and just basic applications installed. Just as you said, I'll be doing something extremely simple, such as browsing the web (maybe 2 tabs open), and transferring files from my Time Machine backup in the background; out of nowhere, that **** beachball will start spinning, and things grind to a halt. Maybe 5-30 seconds later, everything resumes as normal. It's getting so f'n bothersome. I've read everywhere: it's Safari, it's the network, it's Time Machine, it's this or that. I've literally tried everything, and nothing seems to fix the problem. SMART status reports no problems with my disk, Disk Warrior says my directories are optimized, iStat Menus say the CPU isn't working too hard, nor am I running out of memory. For God's sake, what is wrong?!?! I'm sorry if I'm ranting, but I've just about had it. Currently, I'm using Chrome (even though I miss Safari), I'm not backing up to my Time Capsule, and I only open one app at a time (and remember, my installation is brand new; I've simply installed the COMBO updater via Software Update). It still "hiccups." I really, really, really hate to say this, but it's true: I never had problems like this with my old HP running XP. I absolutely love the Mac, and up until now, I've been an overzealous fan boy, but I can't keep doing this. I'm a web developer, so I need my computer to be running in tip-top shape at all times. Oh well, if you figure anything out, I'd love to hear about it. Good luck to you. Again, sorry about the diatribe. Have a good day.
-
So i got a MAC and im trying to update my apps imovie and iphoto but the old account i started with still appears and i cant erase it or delete it. Is it a glitch or something can some really help its a irritating problem. Plzzz respnd some one.
The story:
i got my Mac didnt have an apple id so i used my cousins but now i made me own like ac ouple months ago but when i try to update soem apps my cousins account still appears and i want to get rid of that. Hope someone can help really.Only the Apple ID that bought the apps can update the apps. That Apple ID is permanently encoded in the apps.
Your only option is to delete your cousin's apps* and buy them with your own Apple ID.
*Your cousin's apps on your Mac is software piracy. -
Hi all.
My specs are :
C2D E6850 3.0Ghz
p35 Platinum Motherboard v1.1 ( Bios Version 1.3 )
Corsair 620W HX V2 Series Modular PSU
Creative S/B Audigy SE 7.1 OEM
Patriot 4GB PC2-6400 C5 Extreme Performance (2x2GB) [PDC24G6400ELK] Latency : 5-5-5-15 [2.0v]
500GB Seagate/Maxtor SATA2 16MB
MSI GeForce 8800GTX 768MB PCI-E OC
NEC Optiarc 18x DVD-RW RAM SATA Black
List of problems :
1)
1 boot. auto restart after 2 seconds after starting to boot
2 boot ( RRGR ) - reboot
3 boot -> message that overclocking failed and fail-safe default settings loaded and I'm able to use bios or all stays just like in the second boot till the end of the times ( untill you turn off the PSU and turn it again -> then go to boot one )
2) When in bios it shows that CPU clock is 1.8Ghz but it should be 3.0Ghz
3) It cant find a HDD but it's plugged into us usual and in bios I can see it but when it starting to boot it can't resolve the HDD.
Any ideas ? ThanksMy config:
MB: P35 platinum ver. 1.2
BIOS: Unknown
PROCESSOR: Intel Quadcore Q6600 G0
RAM: Patriot Extreme Performance DDR2 PC800 2x2Gb (total of 4Gb in 2 slots)
PSU: Corsair 620HX (620W)
CASE: Antec SOLO
Noctua NH12F
FANS: 1 x Nexus 120mm fan, 2 x Nexus 92 mm fans
HD: 2 x WD raptor 74Gb
VIDEO: PNY Quadro Fx570
Now I have the same identical problem....
New configuration, assembled by myself.
Plugged only processor and thermal unit, PSU, video, fans.
Connections motherboard-PSU: ATX 24 pin (main power to motherboard), ATX 12V 8 pin (CPU power), ATX 12V 4 pin (PCI express X16 power)
Jumper setting of FSB leaved by default (200. Other values avaiable: 266, 333).
I DID NOT PRESS the CLEAR CMOS BUTTON.
1st PHASE (maybe due to not press the CLEAR CMOS???)
1st boot: a series of autorebooting for a while.
After that a message of wrong overclock settings, but at least i was able to enter on BIOS.
ISSUES:
Under "System information" i noticed a correct identification of CPU model and number BUT under "CPU frequency" a wrong CPU speed (1,80 GHz instead of 2,4) AND under "Usage memory" something like 3Gb instead of my 4Gb.
So i cleared the CMOS by pressing "CLEAR CMOS BUTTON" on the P35.
2nd PHASE
Reboot...
Loaded the BIOS.
Now the Processor frequency is correct.
But when i opened the BIOS "CELL menu" -> "Advance DRAM configuration", and made some changes on DRAM latency (according to the values suggested by my DDR2 manufacturer, Patriot) the BIOS froze up.
Waited for a long while...but at the end I rebooted.
After reboot...PROBLEM WITH MEMORY: the PC just freeze on "Memory Detection Test" (LED sequence: red, red, green, red), so no chance to modify anything (no video, no keyboard, nothing...).
I tried to clear the CMOS again, but nothing.
I tried to unplug the motherboard battery, but nothing.
I tried with putting only one DDR2 module, but nothing.
Right now i can not try another memory module (I hope that tomorrow a friend of mine can borrow me one, so i can make some tests).
BUT FOR THE MOMENT....ANY IDEA???
I'm quite scared....Did I kill my DDR2?????
Or it's an issue with the brand PATRIOT???? (On the forum i read a lot of issues between P35 and memory modules made by Patriot!).
If so, can we hope in a BIOS upgrade that will fix the problem?
HELP ME... -
P35 Platinum and WD Hard Disks unrecognised on cold boot
Hi,
I am having a problem with my WD drives on my P35 Platinum motherboard. Simply, if I power down my PC neither drive is recognised when I boot up again. Usually I have to open the PC, reseat the SATA cables (this may be a red herring) and then when restarted the drives are recognised again.
A simple restart from within Windows (warm boot) works every time.
I would have suspected a cabling connection problem, except that I have tried other cables and also the fact that it is both drives every time, rather than one, other or both randomly.
I have seen other people having problems with the spin-up time of WD drives and have disabled quick booting in the BIOS, but this has not helped much. I have also verified that the RAID Mode is set to IDE, as I am not using any RAID features.
The disks themselves are plugged into SATA3 & SATA4, whilst my Pioneer DVD Writer is plugged into SATA5.
I have the latest BIOS installed but cannot remember the version number off the top of the head, my full hardware spec is in my sig and the 160GB drive is my system disk.
Does anyone have any other suggestions that I could try?
Apart from this issue my PC works flawlessly.
Regards,
CharlesQuote
CoolerMaster 700W REAL POWER PRO MODULAR PSU (RS-700-ASAA-A1)
I would suggest not to use a CoolerMaster REAL POWER PSU for your P35 Platinum. There are known compatibility issues with these devices:
https://forum-en.msi.com/index.php?topic=114534.0
Quote
not being able to power on with the Cooler Master Real Power Pro 750w PSU. After I push the power button, it will light up for a second and the fans will spin, but it just doesn't power up. I am able to power it on with some generic 500w PSU and my girlfriend's Silverstone 850w PSU, but it always fails to power up when I plug the Cooler Master PSU in.
https://forum-en.msi.com/index.php?topic=113573.0
Quote
System powers on for a split second, then powers off. System will boot with another power supply, just not this one.
https://forum-en.msi.com/index.php?topic=113573.0
Quote
Just FYI though, it appears (by some comments on Newegg.com) that there is some compatibility issue between my CoolerMaster Real Power Pro 750W and the P35 Neo2-FR motherboard. The power supply worked fine by itself, and the motherboard ended up working fine with a different power supply (Antec Neopower 650 Blue).
https://forum-en.msi.com/index.php?topic=115623.msg869170#msg869170
Quote
with 700w cooler master psu system wont boot or post, fan start about 3 sec then quit
no beeps, no leds.
with others psu's EVEN CHEAP 450W OR 500W system post FINE!!!
https://forum-en.msi.com/index.php?topic=115623.msg869170#msg869170
Quote
We had the same (ground) issues with Real Power Pro 550W, 650W and 750W.
In fact all of them are based on the same "hardware"
https://forum-en.msi.com/index.php?topic=115623.msg869135#msg869135
Quote
They suspect a ground issue, but also have been reported several 12V rail "abnormal behaviours".
http://forum.coolermaster.com/viewtopic.php?p=79607
Quote
MSI P35 Neo2-FR not compatible with Real Power 750W -
Client installation fails with error GetSSLCertificateContext failed with error 0x87d00281
Hi
Site is SCCM 2012 R2
I am pushing SCCM client manually to a Windows Server 2012 client and it is failing with below errors
GetSSLCertificateContext failed with error 0x87d00281
ccmsetup 02/05/2015 12:04:11 AM
6428 (0x191C)
GetHttpRequestObjects failed for verb: 'GET', url: 'HTTPS://SCCMserver.GROUP.COM/CCM_Client/ccmsetup.cab'
ccmsetup 02/05/2015 12:04:11 AM
6428 (0x191C)
DownloadFileByWinHTTP failed with error 0x87d00281
ccmsetup 02/05/2015 12:04:11 AM
6428 (0x191C)
CcmSetup failed with error code 0x87d00281 ccmsetup
02/05/2015 12:04:11 AM 6476 (0x194C)
Please advice..0x87d00281 = "No certificate matching criteria specified"
Have you deployed proper client auth certs to the client?
Can you please post the entire relevant snippet of the log file? Starting with the first error code encountered is meaningless because now we can't see what happened before which is often the root cause of the issue culminating in the error message.
Have you deployed the proper server auth certs to the MP and DP?
Jason | http://blog.configmgrftw.com | @jasonsandys -
P35 Platinum and 1066mhz Ram OC
Hi there I just bought 4 x 1GB DDR2 1066mhz just would like to know how to set it to run at that speed can anybody help me out im looking for the easyiest way
Specs:
MSI P35 Platinum bios v1.8
MSI 8800GT 512mb OC
Intel Q9300
4GB 1066mhz Ram DDR2
Zalman 750watt PSUyou have to change the FSR: DRAM Ratio.... Your quad has 333mhz of FSB (if you didn't OC), so... you have to choose between 1:1.5 -> to push the mems to DDR 1000mhz (333 x 1.5 = 500mhz) or 1:1.66 to obtain DDR 1100mhz (333 x 1.66 = 550mhz)...
EDIT: see the especifications of your mems, surely they need 2.1v at least to go at 1000 or 1100mhz -
P35 Platinum sits at post with Memory error.
Brand new rig, I put it all together, and on post it starts, does its reset after 3 seconds, (all LEDs red before it does the restart, in case thats wrong)
Then tries again, stopping at r-r-g-r, which the manual says is mem error.
I have tried only putting one stick in, and checked all the slots, i also tried the other stick.
No difference whatsoever. I have no video at all at any time, nothing has ever shown.
At the moment i have no other ram to check my ram against, So is there anything else it could be? The PSU seems to work flawlessly as
it's led system is showing correctly. And its not like theres any drain on it. I have reseated the cpu/hs and gfx twice now. No difference.
Any help would be appreciated, life really sucks without a good computer.
q6600
2xWD500gig Sata (tried booting with neither hooked in at all)
random DVD drive, unhooked to eliminate chance of it being the cause, it Isn't.
OCZ ddr2 pc2 8500 1066 reaper, 2x1gig
msi p35 plat rev1.1, no idea what the bios is.
Enermax infinity 720
EVGA 8800gts 320Don't Reaper's need about 2.2~2.3v?
If so, there's your answer, board doesn't do 1.8-1.9v+ out the box.
Get some 667/800 1.8v RAM. -
Hello,
now, When I reboots my system, I get the following message: Waning !!!!! The previous performance of overclocking is failed, and the system is restored to the defaults setting; press any keyexcept "DEL" to enter SETUP........
I have not configured for overclocking my mainboard, why this message appears it?
Thx
"MSI P35 Platinum"
"MSI 8800 GTS 320 OC"Yes, I flashed to version 1.4, but this is not new . I flashed my bios about one month ago and my problem is since Friday ...
-
P35 platinum combo will not boot windows after bios update via Live Update
Hi,
I had everything running on windows 7 fine until 2 days ago. I installed Live Update from MSI website. I was about to install driver updates for my motherboard, but the bios update went instead. my pc tried to restart after the bios update installed, but it failed. would not post and would only see black screen.
then i removed one of my memory sticks. it would post, but then windows would not start up. it would get stuck at windows loading screen. i tried to reformat with my windows cd. but during install it would blue screen of death me. i tried multiple times and it would always blue screen of death with different errors. the last one i remember was a message saying i should off turn shadowing and caching.
this all started happening after i attempted bios update via Live Update.
Any help is greatly appreciated.
I have a core2quad 9450
this motherboard
MSI P35 Platinum Combo LGA 775 Intel P35 ATX Intel Motherboard
http://www.newegg.com/Product/Product.aspx?Item=N82E16813130141
this ram
G.SKILL 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 1000 (PC2 8000) Dual Channel Kit Desktop Memory Model F2-8000CL5D-4GBPQ
http://www.newegg.com/Product/Product.aspx?Item=N82E16820231145
this harddrive
Mushkin Enhanced Chronos MKNSSDCR120GB 2.5" 120GB SATA III MLC Internal Solid State Drive (SSD)
http://www.newegg.com/Product/Product.aspx?Item=N82E16820226236
this video card
XFX PVT88PYSF4 GeForce 8800 GT 512MB
http://www.newegg.com/Product/Product.aspx?Item=N82E16814150280
Thanks!!!at a guess you need to reset bios to ahci
a bios flash defaults to ide mode
Maybe you are looking for
-
White screen - Laptop doesn't recognise own display as default
Hi all, I've had a search on the forum for the same issue but there doesn't seem to be any issue exactly matching this, so posting. I bought an IdeaPad Flex 14 about 9 months ago. It was fine up til about 6 months ago. Then it started to boot to a wh
-
How to display - Message Length more than 100 characters
Hi, I am displaying a message string which gets generated dynamically. Which means I donno theolength of that. It may go upto 200 characters also. However, In message display, the number of characters have some limit. Could you please let me know, Ho
-
How do I get a picture to fit the full frame size?
I uploaded pictures into premiere pro and the picture is tall enough for the frame but not wide enough. I want to get rid of the black border without stretching the picture, How do i do so?
-
Problem instaling fix for Microsoft teredo tunneling adapter
In Devices and Printers, the desktop icon shows an exclamation point. I ran troubleshooting and was informed that I need Microsoft teredo tunneling adapter. I have no idea what that is. The Troubleshooter tried to install it but was unsuccessful.
-
can anyone help