P35 VGA/BIOS issues (with new GTX275 gfx)

I have a P35 (7345 FIR) mobo running an E8400 and 4gb 800 MHz RAM all at stock with a 750W continuous (Strider) PSU & Vista 64 home premium. All work fine with my original 9600 GT gfx card.
Then I tried to install a Palit GTX275 card - worked fine in 2D but anything demanding '3D' graphics (any game or video stability test) caused immediate black screen death & re-boot. Multiple attempts to use Palit & Nvidia drivers failed to sort this - even resorted to clearing CMOS but no joy. Card tested elsewhere works OK - so I'm now going to try updating the BIOS (currently V1.10) - and having had no luck with liveupdate 3 will be attempting to USB flash it this weekend.
Anyone got any bright ideas or know of any issues that might explain this?
cheers

Quote from: bluemarvin on 26-June-09, 03:48:11
Update time! - Svet was right - it is the Strider PSU causing the problem. I bodged an old 300W PSU with adaptors and everything worked - so why the Strider is tripping out, I have no idea - still can't find any guidance on what to do with the pair of pots. which supposedly control protection sensitivity - further twiddling did not help.
Get rid of that 300W PSU as well [don't use it as solution], go for decent one as Henry suggested.

Similar Messages

When I open a new tab, an unwanted website opens instead of my desired home page. THIS IS ONLY AN ISSUE WITH NEW TABS; (opening the web browser AND clicking on the home button frings me to my desired home page.)

When I open a new tab, an unwanted website opens instead of my desired home page. THIS IS ONLY AN ISSUE WITH NEW TABS; (opening the web browser AND clicking on the home button frings me to my desired home page.)
I have attached the url of the unwanted site.

Use this add-on [https://addons.mozilla.org/en-US/firefox/addon/custom-new-tab/ '''Custom new tab'''].

How can i get my ps 3.0 to install on my laptop ? compatibility issues with newer version of windows

how can i get my ps 3.0 to install on my laptop ? compatibility issues with newer version of windows

It's hopelessly outdated. It's simply not compatible.
Mylenium

P35 Platinum + BIOS issue?

Hi,
Today I updated the BIOS for my P35 to 1.3 through Windows. Everything seemed to go OK but as the system rebooted it never came back to life. The D-LEDs indicate "Memory DecetionFail" however the system was working just fine before the flash.
The ram i'm using is "Corsair XMS2 6400C4".
Rest of the system is:
-P35 Platinum
-E6750
-Above mentioned ram in 2 x 1GB
-GF 7900GT
-Creative X-Fi
-Antec NeoHE 550W
Any ideas? Try to find a floppy and reflash back to 1.1?

Quote from: qyx on 26-August-07, 00:28:14
Try clearing cmos carefully (with power cord disconnected) as described in the manual. Then try it with battery removed and letting machine sit for at least 30 minutes before restoring jumper to original position, closing case and reconnecting powercord. Windows flashing can be quite risky as you just learned. If cmos clear does not work, you should reflash back to the last bios that worked (see other threads for right way to flash). Good luck
Thanks for the tip i tried to clear the CMOS right away but it didn't do anything...i've since read that there are some issues with the 1.3 bios and CL4 ram and i'm going to get some ordinary CL5 DDR2-667 ram tomorrow and will try to boot to see if that does it..
The reason i did the Windows update thing is that i have no floppy so will have to get me one of those as well tomorrow to make sure that I can reflash to 1.1 if indeed the BIOS is corrupt due to the Windows update.

Z68A-GD55(G3) BIOS Issue With Graphics Card

I have been having a strange issue with the BIOS. When I use my graphics card it appears all glitched. (see below picture) When the graphics card is removed it appears fine using onboard graphics.
Processor: Intel Core i7 2600k
RAM: 2x4GB Corsair Vengeance 1600MHz
Graphics Card: MSI HD 6950 2GB Twin Frozr III
PSU: Corsair TX850M
Hard Drive: ADATA 60GB SSD

What screen connection are you using ? Can you try a normal d-Sub connection to start with ?
Also suggest you do a CMOS clear after the connection.
What did you use before this card and did you clean all old drivers before installing the new card ?>>Driver Sweeper<<

P35 Neo2-FR issues with Pioneer DVR-212 SATA ODD on Intel ICH9R

I need some help here, guys, as I am having weirdest issues with Pioneer DVR-212 on my mobo. Everything else is working fine - 4GB Geil DDRII 800, C2D 4600, P35 Neo2-FR, stock settings. I allready updated the bios to the lates revision - 1.8 and drive's firmware to 1.24 - and it does not help.
Basically, drive just locks up and stops responding during writing or even reading a DVD when it's connected to Intel SATA. Tried ImgBurn, Nero, InfraRecorder - same issue happens in Linux, too. When connected to Marvell SATA port - drive behave better and at least this lock up issues stop.
Drive is currently connected to SATA 5 port (1 and 2 are ESATA, 3 and 4 are HDD's and they have 0 issues, 5 is burner - tested other ports and 6 is empty). Drive just stops to respond. In BIOS, Inte l controller is in AHCI mode, but I disabled the port on which Pioneer is - as I read that optical drives have issues with AHCI. Drive is visible in Vista (32 bit SP1) but locking issues happen all the time. Are there some known issues with my motherboard and it's SATA controler? Or issues with this particular drive? Or maybe issues with AHCI mode? I repeat, this lock up issues go away when I connect it to Marvel SATA port - although I don't have the feeling it's working properly, it appears to be working with almost zero issues. I had a lock even now, while writing this - on 32% on reading an image... The rig is prime stable 24h, and works without restarting for weeks. This is the only issue - no issues with hard drives (SEAGATE 320 Barracuda 7200.10 3320620AS and a Maxtor 160GB STM3160811AS). Any help or ideas appreciated!!!

Yes - here are details...
MSI P35 NEO2-FR v1.1 bios 1.8
Intel Core2Duo [email protected] - stock
XFX Nvidia Geforce 8600gt
GEIL Ultra 4x1 GB DDR800 - stock
Seagate Barracuda 320GB ST3320620AS SATA
Maxtor DiamondMax 160GB STM3160811AS SATA
Pioneer DVR-212 SATA firmware 1.24
Chieftec PSU 410W
Cooler Master CM690 Case
Windows Vista 32bit SP1 + Ubuntu 8.04 64 bit (with 2.6.25 hand compiled kernel)
What bugs me the most is that I can't find similar issues on the net - very, very few issues solved by setting the AHCI port to which burner is connnected to non-AHCI mode and that the optical drive behaves better when connected to Marvel SATA controller, rather then Intel SATA...
Issues repeats in Linux and in Windows...
Any thoughts appreciated...

Multiple issues with new installation

I have several issues with my fresh installation of arch (just got myself a free old-as laptop , thus trying out arch for the first time as I usually run gentoo), and I'm not sure where these should go. I figure that I may as well lump them all at once while I'm at it.
The laptop model is a Toshiba Dynabook TX/430DX Japanese laptop similar to a Tecra A2 afaik.
1. If I use stock ARCH kernel, when I load up x11 it seems to be using some wrong drivers or something. Tried with and without xorg.conf. The screen is all fuzzy etc. However, I compiled my own kernel (the Zen sources), took out a whole bunch of drivers I knew I wouldn't be using (etc. SATA/IDE/extra whatnot so that it would merely take 3 hours to compile the kernel), x11 works fine. HOWEVER with the zen sources, when I close x11 I can't exit to console. I get some sort of weird artefact from what happened to be on the screen, or it just goes black. It does actually seem to be in console as I can turn off the laptop with ctrl.alt.del and the capslock etc seems to work fine. I'm thinking of recompiling the zen sources with the stock arch kernel config when I have the time just to see what happens, but I'm not too sure it'd help.
The VGA device is an: Intel Corporation 82852/855GM Intergrated Graphics Device (rev 02), using the intelfb module.
2. In most consoles I've used, if you type in part of a command then press ctrl.up/down, it autocompletes with previous commands you've run matching what you've already entered. However, in my install it brings me to the very first command in my bash history. How do I make it autocomplete previous commands?
3. When I use wvdial (I have a mobile modem), I get odd characters as shown in the screenshot posted.
I don't think it's a unicode issue, as ncmpcpp displays properly. This displays itself both in the console and in x11 (screenshot).
4. If I'm using the stock kernel and I stop wvdial, I get a whole bunch of kernel error trace messages. After this, anything that goes to dmesg will be displayed to whatever terminal I'm on (but not actually echoed, it gets overwritten if I change screen etc). Wvdial is also prone to crashing, sometimes taking out the whole laptop. However, while using the zen kernel I do not suffer this issue at all.
Any help in helping me find the source of these issues would be greatly appreciated. They're not showstopping issues, but extremely irritating nonetheless.
Thanks in advance.
EDIT: I created a zen kernel based on the arch stock kernel. Unsurprisingly, I still suffer from the x11 video issue. However, I don't have issues with number 4.
Last edited by ugugii (2009-06-14 00:57:37)

People are probably going to want to know the make/model of the lappy before they can
help.
Deej

Idoc flatfile to IDOC xml issue with new PI7.11 module SAP_XI_IDOC/IDOCFlat

Hi,
I am trying to develop a scenario as mentioned in the blog using the new module available in PI7.1,but I am getting this error
"Error: com.sap.conn.idoc.IDocMetaDataUnavailableException: (3) IDOC_ERROR_METADATA_UNAVAILABLE: The meta data for the IDoc type "ORDERS05" is unavailable."
I have made every configuration correct and IDOC meta data available in both SAP R3 and PI,but it is still complaning about the meta data does not exist.
Blog: http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/13743%3Fpage%3Dlast%26x-order%3Ddate
did anybody face issue with the new module available "SAP_XI_IDOC/IDOCFlatToXmlConvertor",please help me or give me mre information why I am getting this meta data error.
Thank you,
Sri

Hi Sri,
To Convert IDOC Flat file into IDOC xml from the given blog, the IDOC flat file should be present in standard format like:
E2EDK01005                    0000047110815000000000001.........
E2EDKA1003                    0000047110815000000000002.........
E2EDKA1003                    0000047110815000000000003..........
E2EDKA1003                    0000047110815000000000004........
The Flat file have relationship as IDOC Number "000004711081500000" and segment sequence "0000001".
If your flat file is not in this formate so i don't think that module is able to convert into IDOC xml. and if your file is already in this format then it may be issue with destinations which are created in NWA.
Thanks
Harish

Windows Media Player plugin does not install on a fresh install of Firefox 15. This is a real issue with new students.

I have them go to the correct site:
plugin download page on Interoperability Bridges.
My only options are:
1. Have them move some files over manually; which isn't feasible with students who are technically challenged.
2. Have them install an earlier version of Firefox. 11 is the last known good version that accepts the WMP install. The problem I am finding with this is even though I tell them not to update before installing WMP somehow they still manage to do it. A lot of times they don't know how to tell me what version of ANY browser they are using.
Firefox is one of the few browsers that work with our LMS well, but this plug problem is a real issue.
This only pertains to any student who has never had Firefox on their computer prior to 11.
Thanks in advance.

I noticed it after 11, however with 12 students students experienced problems with puzzles in Angel LMS. We had people roll back to 11.
13 came out and that's when the trouble started. I usually stay in beta so I can get a idea of what's working. Once again I had people roll back to 11.
I logged into a system here I had not logged into before and did a fresh install of 11 and I was able to recreate the problem myself.
Getting people on 11 is a little harder this semester because I had to locate the 11 install and send that along with the plugin to new users. The 11 install likes to force the 15 update so they have to get the plugin installed right away. Sometimes the concept is a little much for some people.
Edit: 12 might have been okay, since we were rolling back anyway. I don't recall any issues with WMP the few weeks students had been using it.
Edit 2: I do remember trying to search these forums for the issue and someone posted that they had been experiencing the same problems with 12 beta (at the time it was beta) and I think it was explained as being a beta issue and it never went anywhere else.

Trying coreboot...vga bios issue

hi. I'm giving coreboot a try, but i've found a couple of problems.
Now, the documentation says if i dont have an external VGA adapter (PCI, AGP, PCIe), i need to add the VGA BIOS.
this is the page with the procedures: http://www.coreboot.org/VGA_support
My MoBo is the Gigabyte GA-MA785GMT-UD2H (Award BIOS), which has an on-board VGA. So i guess that means i have to add the bios.
first theres is the option of specify directly the path, filename, vendor_id and device_id. but i dont have the faintest idea about what path and filename are.
The first method to get it is a program called bios_extract, which i've compiled and run (according to the doc, ./bios_extract hdmag217.rom), without any success, it does not find the file hdmag217.rom
I tried too a former software called awardeco, but it says it doesnt find via.rom
Another method is a direct copy of the bios via dd. So i guess bios ROM it's supposed to be mapped into RAM.
In order to know the sizer of the rom i need to check /proc/iomem and look for ROM. Well it doesnt appear ROM anywhere.
The VGA on-board is an ATI HD4200. Is it possible it is taken as a pci card although is built on the mobo?
I dont wanna flash the bios without having everything clear, so i wanted to make sure first.
cheers.
Last edited by Viper_Scull (2011-03-23 18:48:08)

You need to do this after restoring your BIOS:
# cat /proc/iomem | grep 'Video ROM' | (read m; m=${m/ :*}; s=${m/-*}; e=${m/*-}; \
dd if=/dev/mem of=vgabios.bin bs=1c skip=$[0x$s] count=$[$[0x$e]-$[0x$s]+1])
(That is one line, copy and paste the whole thing). Credit: coreboot wiki

Quality issues with new Mac Mini 09?

I've been itching to hit the 'buy' button -- but in reading the many postings about the new Mac Mini, I'm seeing lots of issues with the bluetooth ... *wireless signal* ...
Is there anyone who's not experiencing any problems?
Sounds like it may be a hardware issue with connections... the last thing I want.
My other choice is the 2008 Mac Pro which seems trouble free.
What do you think?
Thanks.

There is a general issue/trend with the new Mini. There are plenty of reports in these forums and the news has begun to hit the wider press; I guess this is more important to a company with only 2-3% desktop share than posts to these forums. I went to the Genius Bar on Saturday and they have now lodged an official bug report with Apple. It looks like the Mini cannot pair with more than one HCI device. So if you pair with the mouse first the keyboard won't work and vice-versa. They don't think the Mini hardware is broken but that we will just have to wait for Apple to fix the firmware.
Where I do agree is that some issues are OS-X 10.5 related and can therefore affect all Macs. The WiFi has issues where it randomly drops, it doesn't seem able to re-connect at all to channels above 13 and only manually to channels below 12. The system resume function is unreliable. All these started when we moved from 10.4 to 10.5 and so far they have not been addressed. One issue is that there does not appear to be a way for users to log bug reports, except when software crashes. However, the bluetooth issues on the Mac do appear real and are either firmware or hardware related.

Issue with new abap webdynpro INBOX EHP5

Hello Experts,
I'm currently working on the configuration of ESS/MSS services in EHP5. We are using different services like Appraisal OSA, Learning solution,etc. I already configured the Launchpad ESS, it's working fine but now I have an issue with the new Abap webdynpro INBOX. The employee and manager see their workitem notifications correctly in their respective inbox.(I'm calling application: IBO_WDA_INBOX that I integrated in my launchpad).
My problem is that when clicking on a workitem in order that it opens me the appraisal document (in edit or display mode), I got an error saying: "There is no iView available for system "": object "SWF_WIOBN". For more information, contact your administrator."
I did some search on SAP help without any results. I'm wondering how should I register workflow tasks? I saw there is a table called IBO_C_WF_TAS (I added entries e.g:
IBO_WDA_INBOX TS99700031   EXECUTEAPPRAISALDOCUMENT).
I tried also to register all my custom tasks in transaction SWFVISU.
example:
TASK: TS99700013
Visualization Type: ABAP Webdynpro
APPLICATION:    HAP_MAIN_DOCUMENT
DYNPARAM   :    sap-wd-configId=HAP_AC_MAIN_DOC
NAMESPACE :    sap
SYSTEM_ALIAS: SAP_Webdynpro_XSS (I did create a system in sap portal under System Administration with as AS property /webdynpro/dispatcher )
Could you let me know what could be wrong, what I missed? Shall I create an iView, if yes which one? which properties?
I would really appreciate any help.
Thanks!

Hello Siddharth,
Thanks for you reply. Still the same issue. Following are the config I did till now:
In the PCD I created a new business object (SWF_WIOBN), an operation linked to the object (NAVIGATE).
I did create an iView (powl) in the custom folder, I integrated the operation within iView. I created a page that contains the iView.
In the properties of the iView I gave:
Application Name: HAP_MAIN_DOCUMENT.
Launch in New Window: "Display in separate Headerless Portal Window".
System: SAP_ECC_HumanResources
I added the required entries in tables:
IBO_C_WF_TTAS
IBO_C_WF_ACS
IBO_V_WF_TAC
IBO_V_WF_TTAC
etc...
I saw in the code of linked feeder class: CL_IBO_INBOX_FEEDER_WI that it's checking something called "Launch_Editor".. Is it a property that we can set somewhere?
Following are the parameters retrieved by system:
BO_NAME       = SWF_WIOBN
BO_OP_NAME = NAVIGATE
LAUNCHER_PARAMETERS -> empty.??
BO_RESOLVE_MODE = USER_SET_OF_ROLES
LAUNCH_EDITOR empty where must be set?
At the end I still get the error:
There is no iView available for system "": object "SWF_WIOBN". For more information, contact your administrator.
Any advice,
Thanks in advance

ISSUE WITH NEW VERSION OF BLACKBERRY MESSENGER ON DIFFERENT BLACKBERRY PHONES

Dear Madam / Sirs,
I would like to seek assistance in resolving an issue with my BLACKBERRY TORCH 9810 I installed the new version of BLACKBERRY MESSENGER on my phone and it does not work on WIFI ONLY MODE.
For example I traveled to Mexico and Panama and was on a WIFI ZONE with open access and tried to use my BLACKBERRY MESSENGER and it did not work...I tried to deleting the application and installing a previous version but was not possible. The same issue occurs on a different BLACKBERRY phone that it was working perfectly...but after updating to the new version of BLACKBERRY MESSENGER it did not work.
Please help me resolve this issue.
Thanks in advance
Polk Marin
E-mail: (personal info removed)@yahoo.com

and what version do you have installed? I dont see this on ver 6.2.0.56
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

Strange Printing Issue With New HP & Pages

Hello!
I have a very strange printing issue with a new HP printer. I have written pages documents heavy in Texts which are located within tables. The documents print fine on a Cannon and Epson printer and look great but when I print the document on my new HP Laserjet Pro 400 Colour M451nw some of the text on some rows come out of the printer looking like they are bold / slightly fuzzy. This only happens with some of the rows of text, not all of them. The font is the same in every row with the same format.
You can see this in the attached image. The first line (Thanks very much) has printed correctly but the subsequent lines look bold / slightly fuzzy.
After a lot of testing the only way I can resolve this is if I copy the content into a new pages document and only then it will print and look ok with the HP printer.
This must be a problem within my origional document. I would simply copy and paste everything into a new document however this would take a very, very long time (over 5 years of work producing teaching materials and over 100 documents and thousands of tables and formatting that cannot be copied and pasted).
Also, on other printers you can see the lines seperating each row of the table. These lines are not visible on the HP print outs, even when the table is copied into a new document.
Has anyone come accross an issue like this before? Is there a way I can fix this without creating a new document? Do I need to get a new another new printer (the 4th printer this week!)?
Any advise, wise words would be greatly apprechiated!
Thanks!

Sorry, Fruhulda. After 4 hours on the phone with Apple care they are taking this issue further themselves. It seems to be a problem with our pages document and the compatibility with certain drivers. We have still not gotton to the bottom of it and Apple are going to get back to me when they have an answer.
We also worked out that the issue only happens when you print via Ethrenet & USB. Printing via Wifi is ok and there are no quality issues.
Very Strange!

Graphics/artifacting issues with new mid-2014 15" MacBookPro Retina

I'm having graphics issues with my new 15" mid-2014 2.8 MacBookPro Retina. It came with Yosemite. I keep get glitchy
artifacting when using Premiere Pro and After Effects (CC 2014), obviously, but then even just while using Finder when AE and PP are closed.
I've read about it with earlier models, but nothing about the new ones.
I turned off the Automatic Graphics Switching in Energy Saver and just updated my CUDA NVIDIA driver. It's still a problem. Any ideas on what to do next?
Thanks in advance.

Remove CUDA and see whether there's an improvement.
To remove CUDA, triple-click anywhere in the first line below on this page to select it:
/Library/Frameworks/CUDA.framework
/Library/LaunchAgents/com.nvidia.CUDASoftwareUpdate.plist
/Library/PreferencePanes/CUDA Preferences.prefPane
/System/Library/Extensions/CUDA.kext
/System/Library/StartupItems/CUDA
/usr/local/cuda
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Move the selected item to the Trash. You may be prompted for your administrator login password. Continue with the remaining lines. Some of the items may be absent, in which case you'll get a message that the file couldn't be found. After moving all the above items to the Trash, restart the computer and empty the Trash. Don't try to empty the Trash until you have restarted.
If you haven't already done so, back up all data before making any changes.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

P35 VGA/BIOS issues (with new GTX275 gfx)

Similar Messages

Maybe you are looking for