(p3sm –-show) on supsciper manager (SCE)

Hi All,
When I issue the command (> p3sm –-show) on the supsciper manager machine I can notice the following line.
Do anybody know what is the meaning of it.
LEG block mode is on:              false.
And how to enable (Auto-resync at SCE reconnect)
Sample output:
> p3sm –-show
Subscriber Management Module Information:
=========================================
Persistency in SCE (static):       false
Auto-resync at SCE reconnect:      false
Save subscriber state on logout:   false
Pull mode is on:                   false
LEG block mode is on:              false
Logon logging is on:               false
Statistics:
Number of logins:                  1872423
Number of logouts:                 1824239
Number of auto-logouts:            0
Number of pull requests:           0
LEG-SM link failure:
Clear all subscribers mappings:    false
Timeout:                           60
Up time:                           4 hours 16 minutes 44 seconds
Inactive Subscribers Removal:
Is Enabled:          false
Inactivity timeout:  1 hours
Max removal rate:    10 subscribers per second
Task interval:       10 minutes
Last run time:       Was never run
Automatic Logout (lease-time support):
Is Enabled:          false
Max logout rate:     50 IP addresses per second
Task interval:       disabled
Grace period:        10 seconds
Last run time:       Was never run
Command terminated successfully
Thanks,
Mohamed

Hi Punit,
This is an unsupported config. You canot have a CM and SM on the same box. You will have similar symptoms if you do have them on the same box. Sometimes the RDR's will work but something else will break. The reason is Databases. CM has it's own Database and SM runs it's own (Timesten). This has caused confusion and data corupption between the SM and CM.
Given that the latest versions of CM and SM are now tested on VMware, I suggest you run these 2 servers as a VM on the same server.
Shelley.

Similar Messages

  • My problem is that after printing the first photo or picture, when I come to print a second, both the Colour Management and Epson Colour Controls are greyed out and showing No Colour Management

    I have recently purchased a Mac computer (updated to Maverick) to go with my Epson Stylus Photo RX500 printer which has given excellent service with my old Windows computer. However, when trying to print pictures or photos via Photoshop Elements 11, the best results I can get are using the Colour Management and Epson Colour controls in the printing options box.
    My problem is that after printing the first photo or picture, when I come to print a second, both the Colour Management and Epson Colour Controls are greyed out and showing No Colour Management, The only way I can reset the controls is to shut down the printer and computer and restart.
    Could there may be a setting somewhere that I need to adjust please?  I have been in touch with Epson and they say that the Epson Colour controls are part of the Photoshop Elements software but a post on the Adobe forum brought no results and I am unable to contact Adobe.
    <Edited by Host>

    Hello Garry. Thanks for the reply. I guess I should have used a different title from "How do I post a question?" That should come after trying to resolved the colour settings first. However, to answer your question, after experimenting with all the different settings in Photoshop Elements and Epson software, I now start with PSE11 Colour settings then click "no colour management" then after clicking Print, I choose "More Options/Colour Management/Colour Handling/Printer Manages Colour" then I choose "Page Setup/Layout/Colour Matching" which then shows Epson Colour Controls but I also choose "Layout/Colour Management" which then shows "Colour Controls/Mode" I then of course choose an Epson printer profile depending on the paper I am using. I get good results but as I said, the Colour Matching and Colour Controls are then greyed out. Hope that makes sense.

  • Firefox shows in task manager, but won't open

    Firefox doesn't open, though it opens once in a while. It shows in task manager and takes up 50% CPU usage, and ending process and retrying doesn't work. Profile manager doesn't open either. There's no error message, and have restarted laptop (Windows XP) many times, but no results.
    Help would be appreciated!

    Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
    '''Note:''' You might want to print these steps or view them in another browser.
    #Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
    #After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
    #Delete the Firefox installation folder, which is located in one of these locations, by default:
    #*'''Windows:'''
    #**C:\Program Files\Mozilla Firefox
    #**C:\Program Files (x86)\Mozilla Firefox
    #*'''Mac:''' Delete Firefox from the Applications folder.
    #*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
    #Now, go ahead and reinstall Firefox:
    ##Double-click the downloaded installation file and go through the steps of the installation wizard.
    ##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
    Please report back to see if this helped you!

  • How can I find out the date of a movie I am trying to pre-order if the date is not available/showing in the "manage pre-order" section?

    How can I find out the date of a movie I am trying to pre-order if the date is not available/showing in the "manage pre-order" section?

    Thanks so much for your reply King_Penguin. No, sadly there is not indication of the expected release date on the film, it's no where to be found. I have also tried to look in other places online, but no luck. I guess your latter statement jives more with my situation, that  being the studio/rights-holder hasn't feel inclined to provide the date.

  • IPod Nano appears on my list of iTunes devices. Summary tab shows 928 manually managed songs; music tab however shows nothing. Where did the songs go?

    I recently undated software all around, reloaded windows 8 and upgraded to windows 8.1.  My iPod Nano (1.0.4) appears on my list of iTunes (11.1.3) devices. The summary tab for my iPod shows 928 manually managed songs (2 of 8 GBs still empty).  However, when I click on the music tab immediately to the right of the summary tab, iTunes no longer shows my songs, playlists or audio books.  Instead iTunes invites me to "sync" my iPod and kiss my contents goodbye. Why won't the songs appear in iTunes anymore?  My iPod still plays the songs and they appear on the tiny iPod screen.   iTunes however won't show them. iTunes still allows me to drag and drop new music and books into my iPod but iTunes won't let me see the particulars.  I want to delete some audio books I've finished but iTunes won't let me to them.  What gives?

    Thanks iPodmaven for showing me how to check the arrow to the right of the device image and convert it into a inverted triangle.  Problem solved!  Thanks

  • External hard drive seagate 3.0 cant read and not showing in disk management.

    Why my external hard drive seagate 3.0 cant read and not showing in disk management, while 2.0 can read. please help me to solve it. BIG THANK YOU.. 

    Hi,
    Yes, like Vegan said, you should check if your Seagate hard drive if it could available in USB 3.0 port. This is hardware related.
    Karen Hu
    TechNet Community Support

  • I have windows 7 and my firefox client will not open, but it shows in task manager with 108k memory. Whats going on with my firefox?

    As stated on the question I have windows 7 and meet all the requirements. But when i launch firefox It wont start, but it shows in task manager with 108k memory.

    Got the exact same problem aswell, finally fed up with it now as i just started up firefox and 14 new windows opened because of this bug, luckily my computer can handle them but someone with a slower processor it would have been a nightmare, needs fixing ASAP.
    Reverting back to 3.6.3 until this issue is solved. (link for anyone wanting to do the same below)
    http://www.filehippo.com/download_firefox/7345/

  • IPhone 4s not showing up in manage devices

    My wife's iPhone 4s shows up in the side bar of iTunes and sincs fine, but does not show up in Manage devices on her account, where as her iPad does. it clearly shows you how to remove devices, but how can we add one?

    "Manage Devices" appears under the broad heading "iTunes in the Cloud".  I suggest you (or she) do this on her iPhone 4S:
    Go to Settings > iCloud and make sure she is signed on there with her Apple ID.

  • EWA report is not showing in solution manager 7.1 SPS10

    Hi Experts,
    I have configured EWA in solution manager 7.1 SPS10 as per guides and best practices and managed system is showing perfectly for MOPZ configuration, RFC's are working fine but the Background job SM:EXEC_SERVICES completes in a  few seconds with job log content showing the error
    Alerts for system DEV in solution 'Development systems' cannot be sent (denied by customer)
    The EWA alert is generating successfully in managed system and available at service market place but it is not showing in solution manager because of the above mentioned error
    Please let me know any solution for this problem.
    Thanks,
    Bharat.

    Bharat,
    Note  1907383 - How to setup and troubleshoot EarlyWatch Alert reports in SAP Solution Manager 7.1  should have most of the answers related to EWA
    Also Make sure you add the system to active solution by using "Put in Solution".
    "Alerts for system DEV in solution 'Development systems' cannot be sent (denied by customer)"  this msg is for sending alert to SAP. check if note 1925658 is implemented and also note 1984512.
    -SS

  • Why does my iPad not show up in manage storage?

    Why does my iPad not show up in manage storage?

    Don't understand your question - "manage storage"? What are you trying to do? Are you trying to connect to your computer? Are you trying to free up some storage space?
    How much space is used by your Other? You may be able to reduce.
    How Do I Get Rid Of The “Other” Data Stored On My iPad Or iPhone?
    http://tinyurl.com/85w6xwn
    How to Remove “Other” Data from iPhone, iPad and iPod Touch
    http://www.igeeksblog.com/how-to-remove-other-data-from-iphone/
    With an iOS device, the “Other” space in iTunes is used to store things like documents, settings, caches, and a few other important items. If you sync lots of documents to apps like GoodReader, DropCopy, or anything else that reads external files, your storage use can skyrocket. With iOS 5/6/7, you can see exactly which applications are taking up the most space. Just head to Settings > General > Usage, and tap the button labeled Show All Apps. The storage section will show you the app and how much storage space it is taking up. Tap on the app name to get a description of the additional storage space being used by the app’s documents and data. You can remove the storage-hogging application and all of its data directly from this screen, or manually remove the data by opening the app. Some applications, especially those designed by Apple, will allow you to remove stored data by swiping from left to right on the item to reveal a Delete button.
    What is “Other” and What Can I Do About It?
    https://discussions.apple.com/docs/DOC-5142
    iPhone or iPad Ran Out of Storage Space? Here’s How to Make Space Available Quickly
    http://osxdaily.com/2012/06/02/iphone-ipad-ran-out-of-available-storage-space-ho w-to-fix-quick/
    6 Tips to Free Up Tons of Storage Space on iPad, iPhone, and iPod Touch
    http://osxdaily.com/2012/04/24/6-tips-free-up-storage-space-ipad-iphone-ipod-tou ch/
    Also,
    How to Clear Message/iMessage Cache on iPhone & iPad And Reclaim Lots of Free Space
    http://www.igeeksblog.com/how-to-clear-message-imessage-cache-on-iphone-ipad/
     Cheers, Tom

  • Why does my iPad not show up in manage usage

    Why does my iPad not show up in manage usage?

    Why does my iPad not show up in manage usage?

  • Cloned VM's showing in WSUS Manager but name and IP changing on every refresh

    It's likely the WSUS SusClientID, which doesn't get removed during sysprep, that's a duplicate so the records keep overwriting themselves in WSUS.  Have a look at this blog for a description and a script to fix:
    http://blogs.technet.com/b/sus/archive/2009/05/05/resolving-the-duplicate-susclientid-issue-or-why-d...

    Hello all,
    We have approx 6 Windows 7 Pro VM's that a group of users use for a specific piece of software. They log on via RDP from their normal machine when they want to use one.
    VM's were all cloned from an original. I didn't do it so we don't know how they were prepped although I'm under the impression that the SID issue should be sorted because it is showing in WSUS Manager.
    One of our dev's has said it could be an issue from VMWare, possibly there are sharing the same MAC address on their virtual NIC? 
    Has anyone ever seen this happening?
    James 
    This topic first appeared in the Spiceworks Community

  • HT1948 USB drive with install image is showing in Startup Manager on a Mac Pro, but wont boot. Showing circle with cross strip, and shut down automatically. USB device are made and work on two different MacBook Pro, but used on Mac Pro. Any help?

    USB drive with install image is showing in Startup Manager on a Mac Pro, but wont boot. Showing circle with cross strip, and shut down automatically. USB device are made and work on two different MacBook Pro, but used on Mac Pro. Any help?

    OS X installers have always been fairly specific, hardware-wise. I haven't read anything reflecting that situation with the Recovery HD, so it may be that the Recovery HD created for the MacBook Pro does not have the necessary drivers for the Mac Pro. Obviously, nothing definitive here, but a possibility.

  • My laptop have refused to start it will just show windows boot manager on the screen,

    My laptop have refused to start up, it will just show windows boot manager on the screen,and me to choose an operating system to start or press tab to select a tool but when I tryed all those things none of it will respond

    Thanks also Star 1. I have gone the route you suggest also but with the same results as I explained to the hatter. I have about a dozen die-hard Windows friends and they have been trying to help me also. We have tried everything and I have read a several pages on how to do it but nothing looks like what they are saying it does. When in Vista, Vista says it is the default SU OS. When in XP, XP says it is the default SU OS. So there is nothing to change. Only the Windows Boot Manager (which is really not a manager but a boot selector) shows Vista as default and XP next. I've learned again what I already knew. Windows is a conglomerated piece of crap that is hard as heck to use.

  • Cannot show node Workforce Management Core

    Hi all,
    I'm using Netweaver 2004s, ECC 6.0, cProjects 4.0, WFMCORE relase 200
    I config as document cProjects_40_Config_EN.pdf
    In Tcode spro I cannot see node Workforce Management Core in Collaboration Projects/Resource Mangement but I see node Workfore Deployment.
    I have just reactived Business Function EA-PLM and EA-HR but it still cannot show node Workforce Management Core.
    Please help me solve problems.
    Thank you in advance

    Dear Vivek,
    My server is IDES.
    Your document mentions about Organizational Areas but I cannot find in tcode spro.
    When I run cProject. It show some error:
    + Communication with the WFM Core system is not possible
    + Unable to establish with connection with LiveCache
    Please help me!
    Thanks in advance

Maybe you are looking for

  • How to parse xml

    Hi All I want to parse xml document which contains more then one occurrence of particular element. I want to get some sub elements of that element and want take action on the basis of param tag inside this sub element. for example : <appender name="f

  • Can LC Designer produce a flat PDF, not form, as a template for dynamic content?

    Can LiveCycle Designer produce a flat PDF, not form, as a template for dynamic content?

  • Transfer of legacy open P.O with attachments to SRM

    Hello SRM Folks, Can some one let me know How we can transfer Open P.O or closed P.O from Legacy system to SRM with  Attachments directly.. Need your inputs.. Thanks in advance

  • Disabled during suspension. Can anyone help me out????!!!!!!

    The situation goes like this. I got my phone on August 2008 with a 2-year contract. On May 2009, I asked a store manager around my neighborhood for a 2-year suspension due to my military duty and he suspended my account. Now, I've almost completed my

  • Magic Extractor

    Hello Guys: Green Newbie here. I'm working with the Magic Extractor getting rid of my background, and was using the zoom tool while using my foreground brush selecting, and can't figure out how to zoom back out after zooming in??? Help!!! Connie