P4 3.4 GHz post your specs

Just getting set to build a P4 3.4 GHz system. What I am looking for is some guidance in what I can get away with overclocking. Could you all post you spec etc… .

Well the First thing that you should Have if you are Expecting to get any Real Performance from a FSB Overclock, is some Memory that is Built for Overclocking, which PC-3200 (DDR-400) Memory is NOT. I mean you can Only expect to be able to push your current Memory to maybe 440MHZ, which is a PSB or FSB Speed of 220MHZ, Sure you can Clock your CPU Higher, But you will have to Underclock (Change The Ratio) of your Memory to 5:4 or 333MHZ, But then Why Overclock One and Underclock Another . If you wan't to Really be able to go over 220MHZ, you should Invest in some Quality PC-4000 (DDR-500) Modules, and forget about the 3.4GHZ and go with a 2.6GHZ, 2.8GHZ, or even a 3.2GHZ, as they are about $200.00 US Cheaper then the Top Dog 3.4GHZ Northwood, and the money you save, can be Put to some Good Overclockable Memory. I do Not Think that you will be able to Clock the 3.4 higher than the 3.2 anyway And when you can get the same Performance from the 3.2MHZ CPU it Just does NOT Make sense unless you have OCing Memory to match..................Sean

Similar Messages

Any body out there with vivo working on FX ?. can you post your specs ?

Hi,
If there is anybody out there in the universe who can do analog capture with these cards, please let us know.
Just post your specs to enlightment of the rest mere mortals....
I am pretty sure there is a colission for resources... I have rebotted 30 times my PC today and I see a pattern.
After blue screen, my computer will not boot anymore. I have to disconnect the network cable ( I presume to avoid some kind of initialization) or if I am lucky and I can start in safe mode, disable the network interface.
With network disabled, after blue screen ( the usual suspect nv4_mini.sys ) I can reboot without problems, eitehrwise forget it...
Currently, I manage to see color video ( and movement ) when I put into capture mode in Ulead. However, as soon as I request it to start capturing, .... blue screen.
I have dig the whole internet and a lot of people is under the same hassel from all vendors selling video-in FX series.
I have already gone to safe mode, uninstall everything possible and installed piece by piece from start... same results.
any hints I will try.
JCG
MSI K7D master 2xAMD (XP/MP) 2600 1GB ram
2 Seagate 120GB
PSU Qtec 400W ( I know I know... not popular.... but it has been working for me for 1.8 years without a glich and believe me, I put this box under a hard test with full CPU, encoding MPEG for a full weekend and it is fine.... still does if I capture via firewire and later encode... it is just the f%c$k&$in*g WMD that screws up everyting...)
FX5200VTD128
DVD LG

Hi,
First I don't have a clue to what your problem is but...
Yes I can capture with my FX5600-vtdr-128 video card...I can do it in two programs,Studio9 and Roxio DVD creator..The only rub is huge white bars pop in and out of the capture sometimes..Particularly after a glitch in the video..Were talking home movies not commercial copying..As near as I can tell from a google search it's the Nvidia WDM driver thinking that it has to block Macrovision..Good luck,
jolphil

Ten image test: Please post your specs and results!

I have a friend with a quad and a new MacBook(not PRO) and he is reporting great numbers on my "Ten image test"
Time the following:
Select 10 RAW files with NO adjustments. Export jpg original size.
Select 10 JPG files with NO adjustments. Export jpg original size(not export master)
Report your times, what camera the RAW files are from, as well as machine specs(machine, disks, RAM, and video card(single or dual monitors)
Results from the Macintelintosh Books(pro and 13") and iMacs would be nice also!
Thanks!

Camera: Canon Eos-1Ds - 11.1 Mpixel
Conversions (export versions) to Jpeg Quality 10
Ten Raw __ 41"
Ten Jpeg __ 24"
MacBook Pro 17" - 2.16 GHz - 2 Gb Ram - 7200 rpm HD - ATI X1600 256 Mb
MacBook Pro 17" Mac OS X (10.4.6)

Post your specs here if you don't suffer crackling/popping/hangs/distort

Two systems:
Intel System
Motherboard: Gigabyte 8INXP
Chipset: Intel E7205 Granite Bay
Processor: Intel Pentium 4 Northwood 3.06 with HyperThreading
Bus speed: 6 Mhz (overclocked from 33)
Hard Disk: Western Digital 80 Gb (ATA00) and Seagate 200Gb (SATA)
RAM: Gb (2x52Mb OCZ in Dual Channel)
RAM Timings: 2-3-3-8
Video Card: Single Radeon X800XT on AGP 8x (500/000)
Sound Card: X-Fi Fatalty
OS: Windows XP SP2, latest updates
AMD System
Motherboard: AsRock AS939NF4G-SATAII BIOS .40
Chipset: GeForce 600 (almost equivalent to nForce4 with onboard video)
Processor: AMD Opteron 70 (2 Ghz) dual core
Bus speed: 200 Mhz (no overclock)
Hard Disk: Maxtor Diamondmax 0 300Gb (SATAII)
RAM: 2 Gb (2xGb G.Skill) in Dual Channel
RAM Timings: 2-3-2-6
Video Card: Single GeForce 6800GS on PciExpress x6 (500/200)
Sound Card: X-Fi Fatalty
OS: Windows XP SP2, latest updates
Games tested:
Battlefield 2, FEAR, Quake 4, Doom 3 & ROE, Half Life 2, Sin Episodes Emergence, Battle for Middle Earth & 2, UT2004, Prince of Persia trilogy... and lots lots lots more. Sound is always perfect, tested with 5., 2-speakers and headphnes. All games with latest patchesMessage Edited by Juanlo on 05-22-2006 07:8 PM

Sound Blaster X-Fi Xtrememusic (with heatsink attached) with patched driver from SB.com
DFI LanParty nForce 3 Ultra-D AGP (latest official BIOS)
DFI LanParty nForce 4 Ultra-D PCIe ^^ May 06 BIOS from DFI
AMD 3000+ Venice overclocked on both systems to 278x9 or 2500MHz
GSkill 2Gig 2GBHZ UCCC @ 3-3-3-7 500MHz (9/0 divider on NF4-UD)
nVidia GeForce 6800GT/7600GT & now 7900GT using latest WHQL
Just recently upgraded from my NF3-UD / 6800GT AGP system to my current PCIe system.
Only ever installed the basic package in game mode. No problems.
Only one problem. I get big black squares that flicker on the screen during intense gaming sections and loading screens. System has been completely formatted since the new upgrade but the squares remain. Changed PSU, tried different RAM, stock clocks. It's isolated to the X-Fi. This problem existed on the NF3-UD AGP system as well. I had a cheapo SB Li've card before this and didn't have the black squares. Sometimes when the squares appear the system has a little freeze causing the CD-skip noise. The worst offenders are V8 Supercars 3 (Race driver 3) & Oblivion.
It's definitely something to do with the X-Fi.
Music runs fine for me using Winamp 5.2 Full. Haven't had any crackling yet.
I may note that I always use the 3rd PCI slot for sound cards & this X-Fi is no exception.Message Edited by utetopia on 05-22-2006 06:39 PM

Wireless Issues? Post your router.

I'm finding that lots of people are posting issues with the DLink DI-614+ (I have issues with two of those) and the Airport Extreme.
Maybe isn't an issue with older routers? idk, but I had good speed on the UMN campus (I believe they use cisco access points) and since using consumer router I've got junk.
I'm testing an 802.11g Netgear tonight, I'll post results.
Please Post your Routers and if they are 802.11 A, B, or G
I have issues on:
Dlink 614+ 802.11b (2 of them actually)

DLINK DI-604 router with a DLINK DWL-2100AP wireless access point.
Access point running WPA encryption and set to AES, not broadcasting SSID.
Router set to DHCP for the LAN and connected to a DSL modem.
Access Point set to no DHCP obviously and gets IP's from the router.
Access Point using NO turbo or superG whatever modes, it is set to "Wireless G only" as only G NIC's on my network.
DSL speed is 2500 kbps down.
FACTS:
- There have never been any speed or connection issues with the D-Link router or access point among my other Windows machines - a desktop (ethernet) and two Sony Vaio laptops (wireless G).
- My original Mac Book Pro (bought last Friday) with a "W8610.." serial number had constant
trouble connecting to this network and ran VERY slow with frequent disconnects and unresponsiveness when browsing. Latency was terrible and would consistently take over thirty seconds to load a page.
It always "saw" the access point on boot up but would fail to connect despite network status showing full signal strength and "Connected".
Could not ping or use web. The access point DID show the MBP as connected with a good DHCP IP, but nothing on the MBP.
Required me to open diagnostics on the MBP and re-enter the SSID, security type and password every start up. Tried setting the access point to enable broadcast of SSID - made no difference.
Changed WPA to "auto" and TKIP - no joy.
- "W6810.." MBP got extremely hot, had no whine issue or diplay issue but was too hot to touch frequently during use despite being elevated on a Podium Pad. (Did the PSU reset thing - no change in heat.)
- TODAY, replaced the "W8610.." MBP today from the Apple store with a new MBP - new serial is "W8611.." and is a later revision of the MBP - this according to the Apple tech I spoke with this morning who also confirmed the logic board replacements in later "D" revision models.
- The new MBP has zero problems with wireless - it connected right away using the same settings on the DWL-2100AP and AirPort NIC as the previous MBP. It connects on reboot and detects, conencts to the AP without problem.
Speed is excellent and exactly where it should be.
- The new MBP is DRAMATICALLY COOLER than the original. The difference
is nothing less than amazing - the area above the function keys is barely warm even with the MBP running intensive apps.
- Note that on both MBP's I ran and installed all software updates including OS X.
- Apple Store tech and manager (arrogant brat) insisted there was no such problem with heat or logic board issues, no network issues and said they had heard no such thing from Apple despite my conversation with Apple tech earlier that day. Said I should buy an AirPort base station or give up on the networks, blamed DLINK hardware.
Took an hour of insisting they replace it to get anywhere - they ran hardware tests on the old MBP and found no errors - said heat was "normal" despite it being too hot to touch and MUCH hotter than the display laptops.
Mac Book Pro 2.16 GHz Mac OS X (10.4.6)

Proof: ever running left fan is the harddrive! Post your drives!

Hi!
I know there are some posts around here from users that report that their left fan is always running. I started one of those threads myself. Therefore I also know that there is debate, whether this sound comes from the harddrive or from the left fan spinning slowly.
Yesterday I was in a store because my mbp made all kind of noises but this constant sound that seemed to be rather loud on my book was my major concern (I can hear it from a few meters away in a silent environment in which I work most of the time). The technician tried some hacks to shut off the harddrive, but they seemingly didn't work (he actually concentrated on the whine because it was too loud in the store too hear the "swoosh" and because it also has a very intense mooing and a bent case, it's still doa and will be replaced in the next days).
Anyway, today I suddenly noticed that the noise had stopped. I was extatic. As soon as I clicked on something, the noise would start again though.
So: What did the technician do? He set the disksleep timer to a minute. I thought, it then would spin down for a minute. That's why it didn't seem to work, when I ran the command in terminal again in a quiet environment. So after a minute now, my harddisk would spin down.
So here is how you can test if your drive is the everlasting "swoosh"-producer. Don't do anything of the following if you feel as if you had no idea of what you are doing! I can give you no warranties at all (esp. harddrive-damage. See question below! I think it's best to reimpose your normal energy saving settings afterwards and not let the disk spin down every minute)!!!
- Open a terminal-window (it's in applications->utilities)
- Type sudo pmset -a -g disk and note the "disksleep" settings for battery and ac.
- Type in the following command:
sudo pmset -a disksleep 1
You will then need to enter your administrator password.
This will actually set your disksleep timer to a minute (for battery and ac. If you only want to test this for one of those states, use -b (battery) or -c (charger) instead of -a. This could make it easier to go back to your former settings afterwards, in case your ac and batterysettings differ). It is normally tied to the sleep mode of your mbp in general. That's why it's easy to think it's the fans.
- To check, if it worked, enter:
sudo pmset -a -g disk
The new time should then show up under disksleep for both ac-power and battery.
Then just don't touch the book for a minute. Don't do anything with it. Don't click anywhere. After a minute, the harddrive should spin down, leaving you with complete silence. As soon as you do anything that requires hardware access (even clicking on a scrollbar in a programm that runs from an external disk) you will hear the harddrive spin up.
Changing the disksleep might actually change your energy settings. So after trying this you can reset the disksleep to it's previous status by going into the energy saving preferences and readjusting everything. Use the sudo pmset -a -g disk to check if everything is back to normal. Maybe you need to go into the manager another time so the changes will be made.
My question is: Does it hurt the harddisk to spin up and down often? When I set this to a minute and e.g. write a post here, it will spin down or when I read a webpage, it will spin down until the next click of my mouse. So there isn't so much use for it anyway. But will it damage the harddrive over time when it is spinning down so often?
If you think your mbp is very silent, I'm interested in what harddrive you have. If you think, your mbp is unnervingly loud, please post your harddrive as well. (you can find the info in finder->applications->utilities->system profiler->serial-ata)
Mine is a:
Capacity: 74.53 GB
Model: TOSHIBA MK8032GSX
Version: AS114B

So here is how you can test if your drive is the
everlasting "swoosh"-producer. Don't do anything of
the following if you feel as if you had no idea of
what you are doing! I can give you no warranties at
all (esp. harddrive-damage. See question below! I
think it's best to reimpose your normal energy saving
settings afterwards and not let the disk spin down
every minute)!!!
- Open a terminal-window (it's in
applications->utilities)
- Type sudo pmset -a -g disk and note the
"disksleep" settings for battery and ac.
- Type in the following command:
sudo pmset -a disksleep 1
You will then need to enter your administrator
password.
This will actually set your disksleep timer to a
minute (for battery and ac. If you only want to test
this for one of those states, use -b (battery) or -c
(charger) instead of -a. This could make it easier to
go back to your former settings afterwards, in case
your ac and batterysettings differ). It is normally
tied to the sleep mode of your mbp in general. That's
why it's easy to think it's the fans.
- To check, if it worked, enter:
sudo pmset -a -g disk
The new time should then show up under disksleep for
both ac-power and battery.
Then just don't touch the book for a minute. Don't do
anything with it. Don't click anywhere. After a
minute, the harddrive should spin down, leaving you
with complete silence. As soon as you do anything
that requires hardware access (even clicking on a
scrollbar in a programm that runs from an external
disk) you will hear the harddrive spin up.
Changing the disksleep might actually change your
energy settings. So after trying this you can reset
the disksleep to it's previous status by going into
the energy saving preferences and readjusting
everything. Use the sudo pmset -a -g disk to
check if everything is back to normal. Maybe you need
to go into the manager another time so the changes
will be made.
Mine's silent, but then I have a different HD spec from your's.
My question is: Does it hurt the harddisk to spin up
and down often? When I set this to a minute and e.g.
write a post here, it will spin down or when I read a
webpage, it will spin down until the next click of my
mouse. So there isn't so much use for it anyway. But
will it damage the harddrive over time when it is
spinning down so often?
The HD is a finite par, so increasing its usage above the norm. will probably decrease its life-span of effective use.
If you think your mbp is very silent, I'm interested
in what harddrive you have. If you think, your mbp is
unnervingly loud, please post your harddrive as well.
(you can find the info in
finder->applications->utilities->system
profiler->serial-ata)
Mine is a:
Seagate Momentus

P7n platinum - e8400 overclocking issues, pls post your settings

Dear OC experts,
I have troubles overclocking e8400 to 3.6 ghz on p7n platinum board. I have tried many variables and options in BIOS, but the problem remains the same. While doing regular tasks on my PC, everything seems to be stable, but when I start a game (battlefield 2 bad company or skyrim) the PC freezes. I have upgraded BIOS to the latest version, I have all the newest drivers, tried many different settings in the OS, but it does not help. The video card is gtx560. There are no problems/freezing when I set all the values in the cell section in bios back to default.
I have searched web alot, my eyes are red... The only remaining hope - you : )
I would greatly appreciate your help. Could you please post your bios settings for the OC'ed e8400 if you have the same board.
My systems is:
E8400, 4GB 800mhz 6400 RAM
3 HDD (total 1TB)
GTX560 1GB
Win7 64bit
PSU CORSAIR Enthusiast Series 650W ATX12V / EPS12V SLI Ready
Thank you very much in advance.
irsi

You may want to read this useful guide.
http://www.xtremesystems.org/forums/showthread.php?178286-Official-MSI-P7N-Diamond-(780i)-Discussion-Review-Overclock-Guide-BIOS-Thread
Yes I know its the Diamond board, but the OC basics are the same and all the BIOS options are probably pretty similar.
See if that helps you for now.
You will find the latest BIOS versions here http://www.msi.com/product/mb/P7N-SLI-Platinum---P7N-Zilent.html#/?div=BIOS Please use the Forum flasher if you ever intend to flash the BIOS. >>Use the MSI HQ Forum USB flasher<<

Steps to link a report to Web Application Form. Post Your Opinion

Hi friends,
After going through it what is your opinion. please do post your opinion.
Could any one give the complete steps of Linking a report to web form so that when called / clicked the link the report can display the data.
I have unchecked the "Report Option -> Save Data with Reports". So that the report could not take extra space.
I have DB connection code in my .aspx.vb file, it is as follows:
Private Sub ConfigureCrystalReports()
Dim fileName As String = "Reports\" & ReportID & ".rpt"
Dim reportPath As String = Server.MapPath(fileName)
myRepDoc = New ReportDocument()
myRepDoc.Load(reportPath)
myCrystalReportViewer.ReportSource = myRepDoc
myCrystalReportViewer.RefreshReport()
Dim myConnectionInfo As ConnectionInfo = New ConnectionInfo()
If Session("reportConnectionInfo") IsNot Nothing Then
Dim ConnInforArrList As ArrayList = DirectCast(Session("reportConnectionInfo"), ArrayList)
myConnectionInfo.ServerName = ConnInforArrList(0)
myConnectionInfo.DatabaseName = ConnInforArrList(1)
myConnectionInfo.UserID = ConnInforArrList(2)
myConnectionInfo.Password = ConnInforArrList(3)
Else
lblMessage.ForeColor = Drawing.Color.Red
lblMessage.Text = "Session is off. Please Relogin to See the Report."
End If
SetDBLogonForReport(myConnectionInfo, myRepDoc)
SetDBLogonForSubreports(myConnectionInfo, myRepDoc)
myCrystalReportViewer.SelectionFormula = GetFieldName(ReportID) & "='" & Session("CompCode") & "'"
myCrystalReportViewer.Visible = True
End Sub
Private Sub SetDBLogonForReport(ByVal myConnectionInfo As ConnectionInfo, ByVal myReportDocument As ReportDocument)
Dim myTables As Tables = myReportDocument.Database.Tables
For Each myTable As CrystalDecisions.CrystalReports.Engine.Table In myTables
Dim myTableLogonInfo As TableLogOnInfo = myTable.LogOnInfo
myTableLogonInfo.ConnectionInfo = myConnectionInfo
myTable.ApplyLogOnInfo(myTableLogonInfo)
Next
End Sub
Private Sub SetDBLogonForSubreports(ByVal myConnectionInfo As ConnectionInfo, ByVal myReportDocument As ReportDocument)
Dim mySections As Sections = myReportDocument.ReportDefinition.Sections
For Each mySection As Section In mySections
Dim myReportObjects As ReportObjects = mySection.ReportObjects
For Each myReportObject As ReportObject In myReportObjects
If myReportObject.Kind = ReportObjectKind.SubreportObject Then
Dim mySubreportObject As SubreportObject = CType(myReportObject, SubreportObject)
Dim subReportDocument As ReportDocument = mySubreportObject.OpenSubreport(mySubreportObject.SubreportName)
SetDBLogonForReport(myConnectionInfo, subReportDocument)
If myReportObject.Name = "Subreport1" Then
Dim lvSec As Section = subReportDocument.ReportDefinition.Sections("DetailSection1")
If Not lvSec Is Nothing Then
Dim t1 As TextObject
t1 = lvSec.ReportObjects("txtEmpName")
t1.Text = Session.Contents("EmpName")
Dim t2 As TextObject
t2 = lvSec.ReportObjects("txtRepID")
t2.Text = Request.QueryString("REPID")
End If
End If
End If
Next
Next
End Sub
Please do help me out as the data of report is not getting displayed on the report.
After going through it what is your opinion. please do post your opinion.
While creating the Report has the following Report Options on / checked.
1. Database Server is Case-Incensitive
2. Use Indexes Or Server For Speed
3. Verify on First Refresh
4. Show Preview Panel
5. Display Alerts on Refresh
6. Select Distinct Data for Browsing
Do I have check or uncheck any other option?
Thanks and regards
Edited by: Md. Mushtaque on Sep 6, 2008 2:50 PM
Edited by: Md. Mushtaque on Sep 8, 2008 9:27 AM
Edited by: Md. Mushtaque on Sep 8, 2008 12:14 PM

Sir AG,
Thanks a lot for replying and spending your valuable time for my problem.
Sir, I just want to put this in your knowledge that my application is web based application and I am calling these reports through web forms i.e. of ASP.NET coded in vb from .aspx.vb files.
So as per the code I have attached, I have this
Option Explicit On
Imports CrystalDecisions.CrystalReports.Engine
Imports CrystalDecisions.Shared
Next for ReportDocument Object:
Dim fileName As String = "Reports\" & ReportID & ".rpt"
        Dim reportPath As String = Server.MapPath(fileName)
        myRepDoc = New ReportDocument()
        myRepDoc.Load(reportPath)
        myCrystalReportViewer.ReportSource = myRepDoc
Above is the code used by me in Page_Init and I have already tested it from Page_Load. I have got few suggestions from this forum that I should put this code in Page_Init only.
Lastly:
The database connectivity code:
Dim myConnectionInfo As ConnectionInfo = New ConnectionInfo()
        If Session("reportConnectionInfo") IsNot Nothing Then
            Dim ConnInforArrList As ArrayList = DirectCast(Session("reportConnectionInfo"), ArrayList)
            myConnectionInfo.ServerName = ConnInforArrList(0)
            myConnectionInfo.DatabaseName = ConnInforArrList(1)
            myConnectionInfo.UserID = ConnInforArrList(2)
            myConnectionInfo.Password = ConnInforArrList(3)
        Else
            lblMessage.ForeColor = Drawing.Color.Red
            lblMessage.Text = "Session is off. Please Relogin to See the Report."
        End If
        SetDBLogonForReport(myConnectionInfo, myRepDoc)
        SetDBLogonForSubreports(myConnectionInfo, myRepDoc)
SetDBLogonForReport(myConnectionInfo, myRepDoc)
Private Sub SetDBLogonForReport(ByVal myConnectionInfo As ConnectionInfo, ByVal myReportDocument As ReportDocument)
        Dim myTables As Tables = myReportDocument.Database.Tables
        For Each myTable As CrystalDecisions.CrystalReports.Engine.Table In myTables
            Dim myTableLogonInfo As TableLogOnInfo = myTable.LogOnInfo
            myTableLogonInfo.ConnectionInfo = myConnectionInfo
            myTable.ApplyLogOnInfo(myTableLogonInfo)
        Next
    End Sub
This code I have got from a sample of the forum itself.
Sir, after all these effort and the unchecking of option "Save Data with Report" on calling the reports from my forms it is showing blank report. No data from the database is coming form the database.
I have uncheked the option "Save Data with Reports" to get the updated data each time the report has been called but now the status is that nothing is coming.
Thanks again for you precious and valuable effort to help me but the my problem is unsolved, So sir please if you could put an eye on it and help me out to get rid of this problem, I will be very thankful to you for your kind help.
Thanks and regards
Mushtaque

Post Your's 3DMark 2k1 scores HERE

I would like to verify my 3DMark 2001 SE (v.330). Post your's results with complete system description (drivers versions, ram timings, overclock settings (if any), ect.)
Here is my Baby:
- Athlon 3200 (2210 MHz - NC core, no OC)
- MSI K8N NEO Platinum (1.4 bios)
- 2x 512Mb PC3200 Kingston ValueRam (KVR400X64C2.5/512) at 2.5-3-8-3-1T (stock speeds)
- MSI 6800GT (stock speed)
- WD Caviar 80GB SATA 8Mb cache
- Tagan Tg-480 (480W)
- SB Audigy 2 ZS
- Other standar stuff
My 3D 2k1 score: 21435 (with above system&settings, all stock)
Run at:
- Win XP + SP2
- Dx: 9.0c
- ForceWare: 66.70
NOW YOUR'S RESULTS...

Here is mine using the system in my sig.........
3dmark01 score.....24,552
http://service.futuremark.com/compare?2k1=8165419
DX9c
66.81 nvidia drivers
XP Pro with SP2

Post Your's 3DMark 2001 scores HERE

I would like to verify my 3DMark 2001 SE (v.330). Post your's results with complete system description (drivers versions, ram timings, overclock settings (if any), ect.)
Here is my Baby:
- Athlon 3200 (2210 MHz - NC core, no OC)
- MSI K8N NEO Platinum (1.4 bios)
- 2x 512Mb PC3200 Kingston ValueRam (KVR400X64C2.5/512) at 2.5-3-8-3-1T (stock speeds)
- MSI 6800GT (stock speed)
- WD Caviar 80GB SATA 8Mb cache
- Tagan Tg-480 (480W)
- SB Audigy 2 ZS
- Other standar stuff
My 3D 2k1 score: 21435 (with above system&settings, all stock)
Run at:
- Win XP + SP2
- Dx: 9.0c
- ForceWare: 66.70
NOW YOUR'S RESULTS...

MSI K8N Neo Platinum (1.5b2 beta BIOS)
Athlon 64 3000+ @ 2.4GHz (10 x 240)
Radeon 9800 Pro @ 450/375
2x512MB Crucial PC3200 @ 240MHz @ 3-3-3-8 1T
Catalyst 4.9
Score: 23,077
URL: http://service.futuremark.com/compare?2k1=8134558

Best export settings? Post your tips!

I have been using iMovie for a long time. I have messed with settings quite a bit but the files always come out huge. I have seen other people's QT movies with great image quality for small file size. I have no idea how they do it.
My best experience in iMovie is to use the CD-ROM setting for export. This gives it the window size that I want, with a small file size, while maintaining pretty good image quality.
I'm talking about custom settings here. I need something other than the pre-made settings. There are so many custom options, but they're all way over my head. My goal is to use something other than h264, but keep the CD-ROM quality and size.
Does anyone have any good custom settings they recommend for getting a good balance of dimensions, image quality, and file size?
If so, post your tips! Let us know your favorite export settings!
--Timothy

The export settings are determined by the way the file is to be viewed.
"Local" files (those on CD's or fast networks) can be much larger in file size because bandwidth isn't much of an issue. Sent to iDVD and they make great videos that can only play in DVD players or software.
"Web" based files are a new can of worms because each persons opinion of "good" and also "small" file size differ so much.
Best advice anyone can give you is for you to make your own sample export "tests":
Take a minute sample (a part that has high action and motion) and choose the "Expert Settings" to send the file to QuickTime.
Try various video codecs and adjust the data and frame rate to raise or reduce file size.
Try AAC audio (very popular audio format) but set the frequency to "half" of CD quality (22050 Hz). This will be half as large in file size.
If your camera didn't record in stereo (most don't) set the file to mono and you reduce the file size in half again.
Compression is nearly an art form and the options in the expert settings can be a bit confusing.

Got a feature idea? Post your idea or vote on an idea at the ideas site

We have just launched a new site (
http://ideas.acrobat.com) so
that we can hear new ideas and have the community vote on which
ideas are important. Post your idea or vote on an idea. We hope
you’ll check it out.
Thanks,
The Acrobat.com Team
Buzzword is a part of Acrobat.com

The installing groups is actually already implemented in the beta of 2.6, which is in ftp.archlinux.org/other/pacman
From the ChangeLog itself:
Added group handling, so one can run 'pacman -S kde' and
install all files from the KDE group
Not sure about the other things though, those sound like some very good ideas that should be considered and hopefully they aren't too hard to implement.
Kritoke

Feedback for 3G Nano 1.0.1 - Post your feedback!

Hello everyone. How about posting your feedback in regards to the new 1.0.1 update for the new 3G Nanos?
Also anyone have the "tilt issue" with their new Nano's?

Ever since the update my Nano has been shutting off when I press the play/pause button. If I hit play again the screen lights up briefly and then goes dark again. I can get it back on by pressing menu and I can use the center button to start playback; but I can't pause my music or videos. This is really annoying because now I don't know if I have a real issue, or if the update caused this quirk. Regardless I'll probably still take my iPod back because this basic loss of functionality isn't acceptable.

"Error reconnecting to SBP-2 device"Could anyone post your suceessful print

at /etc/modules
options sbp2 serialize_io=1 exclusive_login=0
linux1 (nod1 first boot)
[root@linux1 ~]# dmesg | grep sbp2
sbp2: $Rev: 1265 $ Ben Collins <[email protected]>
ieee1394: sbp2: Maximum concurrent logins supported: 2
ieee1394: sbp2: Number of active logins: 0
ieee1394: sbp2: Logged into SBP-2 device
ieee1394: sbp2: Error reconnecting to SBP-2 device - reconnect failed
ieee1394: sbp2: Logged out of SBP-2 device
ieee1394: sbp2: Maximum concurrent logins supported: 2
ieee1394: sbp2: Number of active logins: 0
ieee1394: sbp2: Logged into SBP-2 device
linux2 (node2 second boot)
[root@linux2 ~]# dmesg | grep sbp2
sbp2: $Rev: 1265 $ Ben Collins <[email protected]>
ieee1394: sbp2: Maximum concurrent logins supported: 2
ieee1394: sbp2: Number of active logins: 1
ieee1394: sbp2: Logged into SBP-2 device
The 2nd boot server will alway kick out the 1st booted server from firewire
connection.
i try to use diffrent 1394 card , this issue still exist.
Could anyone post your suceessful printout? ( both node status )
Message was edited by:
kook.liu
Message was edited by:
kook.liu

My dmesg output looked exactly like yours and I was able to get a RAC up and running.
I do not believe this is a problem as it worked for me with identical dmesg output.
I think it means that the first node which was connected to the Firewire drive gets dis-connected when the second node tries to connect to it. That is why you get the "reconnect failed" message.
After it fails to reconnect, it logs out of the device and then logs in again. If your device did not support concurrent logins, you would see a different error message in your dmesg output ("login failed").
A simple way to check if the device is available to both nodes after booting is to run the fdisk -l command on both nodes. If you can see the device on both nodes in the fdisk output then it is available on both nodes.

Post your questions about #BlackBerry10 here!

Hey everyone,
What a week last week! I think I'm finally starting to settle down after all the excitement with our global launch events last week.
If you're getting a BlackBerry 10 device soon, take a look at these tips on the BlackBerry Help Blog to help you set up your email, contacts, calendar and social networks: http://helpblog.blackberry.com/2013/01/blackberry-10-add-email-contacts/
Have other questions about BlackBerry 10? Our community can answer pretty much anything, just post your question below!
Remember, if you have a BlackBerry 10 device and need support, check out the BlackBerry 10 Support boards on the main page of the community.
^Bo
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Likes for those who have helped you.Click Accept as Solution for posts that have solved your issue(s)!

sanjithb wrote:
Why is the bis being stopped and not unlimited in south africa. Especially on the Z10.
the BIS is not stopped. BIS is still required for OS7 and previous.
the Z10 does not need a specific BIS plan, which is generally considered a very good improvement.
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

P4 3.4 GHz post your specs

Similar Messages

Maybe you are looking for