P43 Neo-3 Board needs cmos reset for each restart

Greetings, thanks to help from this board, I fixed an earlier problem, but I'm still having one issue. I updated to the bios recommended for my cpu (the 7514v15.zip file installed via the usb method recommended on this site), and when I start up the computer (immediately after clearing cmos), it says that the bios is incorrect. If I go into the bios from there, I have tried 1) loading the default settings and 2) loading optimized settings. Each of those allows me to get into the OS and everything works normally, but if I restart, all of the fans start, etc for about 5 sec and go off about 5 sec, and this pattern repeats without a signal getting to the computer. If I clear cmos, it works again, but gives me the bios error that I mentioned above.
Any suggestions?
Here's the gear (all new):
N82E16820231209 MEM 2Gx2|GSK F2-6400CL4D-4GBPI-B R http://www.newegg.com/Product/Product.aspx?Item=N82E16820231209&Tpk=N82E16820231209
N82E16819115037 CPU INTEL|C2D E8400 3G 775 45N R (E0 stepping) (coolermaster cooling)
N82E16813130185 MB MSI P43 NEO3-F 775 RT
N82E16814150316 VGA XFX PVT98GYDLU 9800GT 512M RT
N82E16817341016 PSU OCZ|OCZ500MXSP 500W RT http://www.newegg.com/Product/Product.aspx?Item=N82E16817341016&Tpk=N82E16817341016
N82E16811129021 CASE ANTEC|NINE HUNDRED BK RT

That's not BIOS problem, you have some sort of instability.
Test with just one memory stick only.
Try bump memory voltage to 2.1V in BIOS and use 2T.
Test each one memory stick alone with >>Memtest86<<

Similar Messages

Need password reset for HP LaserJet M1536dnf MFP the same as others on this forum.

I have the same M1536dnf password problem here, I can't access the settings.
I can't activate the duplex mode without it.
Thanks

Hi @HPFix7,
I see that you need the reset for the printer. I can help you.
I can send you that information in a private message.
In the forum beside your handle name just click on the envelope to view it.
Have a wonderful day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Need password reset for hp mini 1101

need password reset for hp mini 1101cnu932bkxrplease help

Hi: Please read this post which should resolve your dilemma. http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/System-Halt... Then... You can: 1. Use the unlock code you generated to enter the BIOS
2. Disable all passwords that are enabled in the BIOS's security menu.
3. If asked for current password - type the unlock code
4. For new password, just press ENTER key
5. Repeat the same for verify password column.

I have multiple computers set up on homesharing under one itunes account. Can I use face time on all of them or do i need seperate accounts for each?

I have multiple computers set up on homesharing under one itunes account. Can I use face time on all of them or do i need seperate accounts for each?

I'd suggest you consider a cloud-based file sharing service such as Dropbox for this sort of use. iOS is not designed to be synched with more than one iTunes library at a time, so attempting to use it as you describe, connecting a single iPad to multiple computers, almost certainly won't work as you intend and is likely to cause nothing but headaches.
Regads.

I have an iPad, iPod touch, iPod classic. I tried using one account for allow only not being able to sign on with my touch. Do I need separate accounts for each?

Do I need separate accounts for each?
I have an iPad, iPod classic and an iPod touch.
Can not sign on to App Store with the touch.
So how can I set up a new account?

Error message -can not sign into App Store
Same message for iTunes
I use my iPad most of the time but would like to ad app to the touch

Need new spool for each Start_form

Hi all
I have a print program for RFFOAVIS. i have different orders spools shoould be like one spool for each order. but now i am seeing only one spool for all orders.
First Open_form, then I am calling the same for each order using start_form and end_form. then i am calling Close_form.
Though in Open_form i pass options tdnewid as 'x' or space i am seeing only one spool for all the orders.
but i need New spool for each order.
Regards
helpful answeres are surely rewarded

Hi Priyanka,
you have to 'X' the field TDFINAL in OPTIONS too.
Try this.
Cheers,
Joost

Problem with K9A2 NEO-F board...resets after post

First time post here, sorry if this subject has already been went over. Upgrading my board, chip, RAM, and video card. Went with a dual core Windsor 2.8, 4 gig of Geil ddr2 800 ram, a MSI 8800GT video card and the K9A2 NEO-F board...the board sees the chip and counts up all the ram and finds the one SATA drive i installed. The post goes ok and windows starts to load and then a screen flashes too fast too read, and it resets back to the post again. The BIOS is the weird part. I go in to set the boot sequence, and all available bootable items are [bracketed] and any item selected is "disabled in the corresponding menu". It wont allow me to choose any bootable item; the floppy, the cdrom or the hard drive. Anyway, i have no idea why this board wont boot to my winxp drive from my old config computer. Any ideas anyone please?

??? HUH?
You can't do that! Read this carefully: you can NOT use one installation on another computer. Nor can you swap boards/cpu in an existing machine and expect Windows to work. If you want the OS to run, install the hardware you want and install Windows on the machine you want it to run on. Installing Windows using an old "bare" PC and then put that HDD into another machine will NOT work.
Now, please do a fresh Windows install on the PC you want it on. I cannot explain it more clearly...

Need bios reset for hp dv 40000 I hit 3 time error code is09924

I need to reset Bios password for hp dv4000 I hit it 3 time error code 09924

Hi,
Try entering:     pjfgn
                                  or
                               wpkkxh
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

AMF3 references - do they reset for each serialized object?

I have been writing some PHP code to handle AMF3
serialization and deserialization so that I can pass objects back
and forth over a socket. In trying to implement the
AMF3
specification, I'm having a bit of trouble with the concept of
references. The
OSFlash
site has this to say:
References are more prominent in AMF3 than in AMF0, and one
should have two or three arrays to keep track of them, one for
strings, one for objects and possibly one for class definitions
(some combine the second and third array). References are
per-body, so the reference arrays should be reset every time
a new body is encountered (this can happen if calls are batched or
if a /onDebugEvents body is sent.
Does this mean that each time a serialized object is sent
with a socket.writeObject(someObj) call that I need to reset these
references and start from scratch? That would make A LOT of sense
because otherwise, these arrays to track objects would grow QUITE
large over time.

You mean the lines below at Timer.java file?
#if (taskFired) // Task fired; run it, holding no locks
# task.run();
That's true; run() method is called synchronously.
It's a little bit confusing that TimerTask must implement
the Runnable interface just for this purpose. It let me
think that's another thread :))
It could have been another interface which would probably
be called "TimerContainer" or something like that.
Anyway, thanks for info.
java cannot do 'real-time' in any sense of the word.
As for your question about threading in
java.util.Timer...
/me quickly glances at the src code.
all the Tasks are executed from the same Thread
synchronously.
rob,

Connect by query, need root element for each row

Hi,
I am working on a hierarchical query, using connect by prior. Each node in the tree has two properties, an type and a sequence.
The table that contains the hierarchy has 4 fields:
element_type_from
element_sequence_from
element_type_to
element_sequence_to
Each child has one parent, a parent can have multiple childeren. For a leaf, the fields element_type_to and element_sequence_to are null.
To generate a tree you can run:
select element_type_to
,      element_sequence_to
from   element_hierarchy
start with element_type_from = [root_element_type]
       and element_sequence_from = [root_element_sequence]
connect by prior element_type_to = element_type_from
       and prior element_sequence_to = element_sequence_fromThat works fine... however... not only do I want the child elements, I would like to return the root element sequence for each child (in our table the root element type is always the same). There are multiple root elements and I want to create a list containing all trees and each node in the tree must have its root as well.
There is the option of using sys_connect_by_path. This returns the root, but also the entire path to the current child. Also it returns a varchar2, that needs to be substr-ed and to_number-ed to get to the sequence... not nice.
warning, extremely ugly (but functional) code:
select element_type_to
,      element_sequence_to
,      to_number(substr(sys_connect_by_path(element_sequence_from ,','),2,instr(sys_connect_by_path(element_sequence_from ,',') ||',',',',2)-2)) root_sequence
from   element_hierarchy
start with element_type_from = [root_element_type]
       and element_sequence_from = ( select [root_element_sequence] from all_root_elements )
connect by prior element_type_to = element_type_from
       and prior element_sequence_to = element_sequence_fromThere has to be a simple solution that I am missing here! Can you help?
Edit: Oops, database version is 10.2.0.4.0

Hi,
What you posted was actually the best way to do it in Oracle 9.
Since you're using Oracle 10, you can use CONNECT_BY_ROOT, as William said:
select element_type_to
,      element_sequence_to
,      connect_by_root element_sequence_from AS root_sequence          -- Changed
from   element_hierarchy
start with element_type_from = [root_element_type]
       and element_sequence_from = ( select [root_element_sequence] from all_root_elements )
connect by prior element_type_to = element_type_from
       and prior element_sequence_to = element_sequence_from
I hope this answers your question.
If not, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) from all tables, and the results you want from that data.
Explain how you get those results from that data.

HT201320 Need different sound for each email account

How can I setup a different sound for each email account incoming emails?

Tell Apple you'd like to see this feature...you're not the first:
http://www.apple.com/feedback/iphone.html

BEFW11S4 v. 4 needs constant resetting for connection

I have two linksys products -- a BEFCMU10 v2 modem and a BEFW11S4 v4 router. Between two households, I have given MAC ID access to five machines (4 laptops, 1 iTouch).
It seems as though the computers (especially our neighbors') have connectivity problems unless I turn the power off and on -- sometimes once a day, sometimes more. Sometimes that works right away (like this morning), but not always. Usually I just flip the power strip, but in hopes of figuring out what is the culprit, I just unplugged and plugged the router today. That connected my laptop immediately.
What's the deal? The neighbors don't have access to this manual switch-flipping reset, so they're getting restless. I have no hardware expertise, so I'm at a loss...
Thanks!
Message Edited by sresari on 10-25-2008 09:52 AM

Try to Change the wireless settings on router :
Open the setup page of the router using 192.168.1.1 by putting the password as admin with username as blank & under the wireless section change the channel.
And also you can try to upgrade the firmware of router by logging on to www.linksys.com/downloads

Help needed changing colour for each top Parent menu bar

Can anyone help me I need the change the background of each
parent menu block. with the child block keeping the same colour.
but having a tint of the same colour in hover state.

Can anyone help me I need the change the background of each
parent menu block. with the child block keeping the same colour.
but having a tint of the same colour in hover state.

Do I need seperate folders for each html file

I would prefer to keep all of my html files in the same
folder.
Is there a way to get the css files etc in a seperate folder,
or do I have to have each html file and its related
css files etc, in their own folders?

There is no structural requirement for your site files other
than the one
you impose. Put them anywhere you want within your site....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Travistee" <[email protected]> wrote in
message
news:e4f90t$472$[email protected]..
>I would prefer to keep all of my html files in the same
folder.
>
> Is there a way to get the css files etc in a seperate
folder, or do I have
> to
> have each html file and its related
> css files etc, in their own folders?
>

HT5167 I recently purchased Lion for my Desktop, How many computers can I upload with Lion upgrade with the initial purchase or do I need to pay for each computer, I have 3 laptops

How many computers can I upgrade to Lion after purchase from the A store?

If you are referring to the USB Lion Flash installer or the App Store download, then you can install on all the computers you own.

P43 Neo-3 Board needs cmos reset for each restart

Similar Messages

Maybe you are looking for